Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.9 LAccepted-AOC BLOCK C 14 GROUND FLOOR PLOT 618 624 BHIVANDIWALA TERRACE JAGANNATH SHANKARSHETH MARG DHOBI TALAO NEAR KALBADEVI POST OFFICE MUMBAI 400002 | MUMBAI | MAHARASHTRA | 400002 | L1 | Accepted-AOC Being lowest Tenderer | |
| 2 | L2₹33.7 L+₹5.2 L (18.4%)Rejected-Finance FLAT NO 1004 BUILDING NO L 11 KEDAR HOUSING SOCIETY 10TH FLOOR SECTOR NO 21 TALOJA PHASE 2 PANVEL RAIGAD NAVI MUMBAI 410208 | NAVI MUMBAI | RAIGAD | MAHARASHTRA | 410208 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹34.2 L+₹5.8 L (20.4%)Rejected-Finance 1202 SAI PROVISO DHNISHT PLOT NO 72 73 SECTOR 20 KOPARKHAIRANE NAVI MUMBAI | THANE | MAHARASHTRA | 400601 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹35.2 L+₹6.7 L (23.7%)Rejected-Finance 1 14 SUJAL MANSION B BLOCK BHANGWADI KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | L4 | Rejected-Finance Being other than Lowest Tenderer | |
| 5 | L5₹39.1 L+₹10.7 L (37.5%)Rejected-Finance B 134 GANESH MURTHI NAGAR PART III COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L5 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
15 Feb 2025, 6:55 pmClosed
MAJOR ANIL KUMAR S GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8166 REPAIR MAINTENANCE OF LIGHTENING PROTETCTION INCLUDING EARTHING AND OTHER CONNECTED ACCESSORIES UNDER AGE EM II UNDER GE NW KUNJALI
2025_MES_696467_1
8166/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹98,000
Yes
14 May 2025
4 Feb 2025
17 Feb 2025
7 Feb 2025
15 Feb 2025
8 Feb 2025
4 Feb 2025 - 7 Feb 2025
Amount
Dismantling of old unserviceable and supply & installation of JEF Nimbus Early Streamer emission Air terminal (ESEAT). ESEAT shall have a corrosion resistant stainless steel body (AISI 316 grade) capable of working in hazardous atmosphere. The Air terminal shall be non-radioactive and require no special licensing. The unit shall be fully autonomous (no battery, no external power supply required ), collect energy from ambient electric field. ESEAT model must be tested in a high voltage laboratory in accordance with NFC 17 102 for a series of 100 shock waves equal to 325µs in order to measure the average gain in triggering. The average gain in triggering time (ΔT) obtained during the lab test for the offered model must be mentioned in the test report. ESEAT must work on negative as well as positively polarized discharges. ESEAT must have been tested for such discharges by a reputed Indian Laboratory like Central Power Research Institute (CPRI). A dedicated tester should be avilable to test the healthiness of the ESEAT on request ( Courtesy : Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : NLP 2200 - Radius of protection = 30 Mtrs Level of protection considered for the project = Level I.
Dismantling of old unserviceable and supply & installation of Standard / Side mounting / Special Mounting Structure of GI + Aluminium of height 4.5 Mtrs with base plate suitable for roof mounting on concrete base and with FRP adapter without GUY kit,complete all as specified and directed.
Supply and fixing cable junction box 104x104x 70 mm with terminals,complete all as specified and directed .
Dismantling of old unserviceable and supply & installation of test link box in order to disconnect the earth termination system for enabling measurements,complete all as specified and directed .
Dismantling of old unserviceable and supply & installation of 4 Digit electromechanical Lightning Event Counter in WEATHER PROOF ENCLOSURE. The counter should give the number of strikes intercepted by the lightning arrester,complete all as specified and directed .
Supply of JEF ECO SAFE Maintenance Free Grounding Solution set comprising of High tensile low carbon steel rod of 3 Mts length & 32 mm dia with 250 micron ( average ) molecularly bonded copper on the outer surface to confirm with requirements of UL467 along with Back-fill compound strictly be a Carbon based conductive concrete type which has a resistivity of less than 0.12 Ohm Mtr as per Clause 14.5D of IEEE : 80 standard. Back-fill compound should be electronically conductive ( Like in metals ) and should not depend on moisture for conduction. JEF ECO SAFE compound shall be supplied in 50 Pound Bag. ( 1 Bag required per earthing set). Back-fill comound should be environment friendly, should solidify when mixed with water and set like concrete and should not leach / diffuse into the ground. A suitable earth terminaton clamp should also be supplied along with the set incl Supply of Eco Friendly weather proof High Density Polyethylene Earth Pit Chamber,complete all as specified and directed . Note : Back-fill compund shall not be mixed with any soil while pouring in the bore hole.
supply & fixing GI strip of size 32 x 6 mm fixing on wall/ground including all accessories such as insulators etc.complete all as specified and directed. Note :(i) The work will be carried out at any height (ii) All safety measures will be adopted and at any location all in included in quoted rate.
supply & fixing aluminium strip of size 25 x 3.15 mm fixing on wall/ground including all accessories such as insulators etc.complete all as specified and directed . Note :(i) The work will be carried out at any height (ii) All safety measures will be adopted and at any location all in included in quoted rate.
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan /sockets/power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces complete all as specified and directed .
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall//ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of PVC Modular box with cover plate fixed on wall for fixing the switches, switch sockets,sockets, regulators etc complete all as specified for One light point controlled by one 5A switch complete all as specified and directed . :- NOTE: a) Colour coding shall be followed as given below:- i) Phase - Red/Yellow/Blue ii) Neutral - Black iii) Earth - Green b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit. (c) Make of wire :- Havells/ Finolex/ Plaza/Gloster/Polycab. (d) Make of PVC casing capping :- Precision/ pesto plast / National/Plaza
All as per item No. 10 above but for One Fan point controlled by one 5A switch complete all as specified and directed .
All as per item No. 10 above but for One 5A flush type switch socket point on same board board complete all as specified and directed .
All as per item No. 10 above but for One 5A flush type switch socket point on independent board complete all as specified and directed .
M&L for point wiring (Work station for computer)complete with proper clour coding using PVC insulated unsheathed multistranded copper conductor cable 4.0 sqmm size, 1100 volts ISI marked, FRLS grade drawn through and including non metalic rigid, double lock, ISI marked, not less than 25mm casing caping with all accessories such as tee, bends, elbow, reducers, junction box etcfixed on wall/ceiling/truss and one run of PVC insulated unsheathed, multistranded copper conductor cable of 2.5sqmm size, 1100 volts, ISI marked, FRLS grade green colour as earth continuty conductor connected to common earth dolly with and including modular box with cover plate frame in any module ( Make : schneider elect/legrand mosaic/anchor ave) complete necessary electric connection for each workstation point comprising of 03 Nos 6A sockets and 01 No 15A socket on same board complete all as specified and directed. Note: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Make of wire : Polycab/ Havells/ Finolex/ Plaza
S & F in repairs modular switch 1 way 6A, 1 module complete all as specified and directed .
S & F in repairs modular switch 1 way 16A, 1 module complete all as specified and directed
S & F in repairs modular socket, 6A - 2/3 pin combined 2 modules complete all as specified and directed .
S & F in repairs modular socket 6/16A,2/3 pin, combined 2 module complete all as specified and directed . .
S&F for modular fan step regulator, 120W - 2 modular complete all as specified and directed by Engr-in-charge.
S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed .
S & F in replacement of MCB 6 to 32 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA .including taking down old unseviceable MCBs including making connection complete all as specified and directed .
S & F in replacement of MCB SP 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA .including taking down old unseviceable MCBs (Make Legrand cat No 408596 or equivalent make in list of manufacture) including making connection complete all as specified and directed .
S & F in replacement of MCB SPN 40 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA. including taking down old unseviceable MCBs including making connection complete all as specified and directed .
S & F in replacement of MCB TP 25 to 63 Amps capacity, C Curve type suitable for 240 volts AC supply,TP with over load and short circuit protection and rupturing capacity not less than 10 KA including taking down old unseviceable MCBs (Make Legrand cat No 408766 or equivalent make in list of manufacture ) including making connection complete all as specified and directed .
S & F in replacement of MCB TPN 40 to 100 Amps capacity, C Curve type suitable for 240 volts AC supply,TPN with over load and short circuit protection and rupturing capacity not less than 10 KA .including taking down old unseviceable MCBs (make Legrand cat No 408792 or equivalent make in list of manufacture) including making connection complete all as specified and directed.
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP IP 54 protection surface mounting SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent make in list of manufacture (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent make in list of manufacture (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting SPN 16 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507610 or equivalent make in list of manufacture (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507720 or equivalent in list of manufacture (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
S & F in repair Distribution Board double door, prewired type, made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection surface mounting TPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc complete all as directed. Make -Legrand cat No 507753 or equivalent in list of manufacture (Note : The cost of removing old wooden box and making good of surface i.e. brick work, plastering etc is included in quated rate)
Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including copper conductor cable of suitable size from ceiling rose complete all as specified and directed .
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed ..
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type (warm/white) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed .
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface mounted type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed .
Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type warm white light with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
M/s ASPIRE ENGINEERING ENTERPRISES (BID ID -3240464)
ASHOK ENTERPRISES (BID ID -3238103)
Chakshu Enterprise (BID ID -3240767)
SHRI SAI ENTERPRISES (BID ID -3235543)
K.C.P ENTERPRISES (BID ID -3240181)
Shree Ayyappa Engineering (BID ID -3240582)
shubham construction (BID ID -3238791)
ADITYA CONSTRUCTION (BID ID -3240168)
SRISHTI CONSTRUCTIONS (BID ID -3239443)
TETRI ENTERPRISES (BID ID -3238671)
cooltech engineering services (BID ID -3240724)
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .