Development with Tourist Infrastructures at Piranmalai, Sivagangai District.

Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth.

Earth work Open excavation by Mechanical Means for Open Earthwork in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and filling of River Sand by lorry in Play ground filling including stacking for Premeasurement conveyance loading and unloading charges and all other instulation chargse and including filling, laying, watering, and consolidated etc., complete.

Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers - Mixing by mechanical means

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner , vertical stiffener, side support and Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting centering for plane surfaces such as RCC Floor/Roof Beam, Lintels, Cantilever Beams, Bed Blocks etc.. with necessary supports and strutting upto 3.60m height in all floors with all cross bracings using MS Sheets made of 10 gauge thick welded with MS angle of Size 25mm x 25mm x 3mm for boarding laid over Steel adjustable Span of Size 2m x 2m(expandable upto 3.60m) and Silver Oak Joists of Size 10 x 5 cm spaced at 50cm to 60cm c/c and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick) Spaced at not more than 50 to 60cm c/c , etc complete complying with standard specifications. Steel adjustable span and Steel Adjustable telescopic props shall be provided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Supplying and erecting steel centering including necessary supports For plane surfaces such as rectangular or square RCC columns etc. which require only nominal strutting using mild steel sheets made of 10 gauge thick welded with MS angle size 40mm x 40mm x 5 mm and supported by Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) made with outer steel pipe with dia 50mm (3.60mm thick) and inner steel pipe with dia 40mm (2.90mm thick).etc..complete in all floors complying with standard specifcation. Steel Adjustable telescopic props shall be rovided as directed by the departmental Officers. (Payment for centering shall be given after the concrete is laid).

Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cu.m) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone sand, but excluding cost ofreinforcement grill and fabricating charges, centering and shuttering and also including laying,vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc.,complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials).

In Foundation and Basement

In Ground floor

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD/CTD/TMTand all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I. binding wire, wastage etc. complete complying with standard specification and as directed by the departmental officers.(Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire)

In Foundation and Basement

In Ground floor

Brick work in Cement Mortar 1:3 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing, etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge. a)In Foundation and Basement

Brick work in In Cement Mortar 1:5 using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing,etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally.other type of bond shall be done as directed by the Executive Engineer in charge.

In Foundation and Basement

In Ground floor

Brick partition walls of 11.50cm thickness using best quality Fly ash Brick of size 230x110x75mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) a)In Ground floor

R.R Masonary in cement mortar1:5(one cement,and five crushed stone sand) for foundation and basement including simultaneously pointing above ground level with the same mortar directed by the departmental engineers etc., complete complying with standard specification

Pointing with Cement Mortar 1:3 Flush pointing Random Rubble , etc., complete complying as per the standard specifications.

Damp proof course as per IS 3067:1988 with Cement Mortar 1:4 (One Cement and Four crushed stone sand) 12mm thick mixed with best approved quality Integral liquid water proofing compound conforming to Indian Standard specification as specified by the departmental officers at 2% by weight of cement used , finishing and curing etc. complete complying with standard specification - Machine Mixing

Best Tiled roofing with Mangalore tiles, set in mortar over flat tiles and including teak reepers

Manufacturing supplying and fixing of Fully Panelled steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames, stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter. 3nos. of Steel Parliament Hinges of Size 125mm x 150mm in case of single leaf and 6nos. of Steel Parliament Hinges of Size 125mm x 150mm in double leaves shutter to be provided. 6nos. of holdfasts 200 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 3 nos, one at the top, one at lock rail(Inner) and the other at the bottom are provided 1no. Aldrop is provided at lock rail section in the door 2 Nos of 200mm handle are to be provided. One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters. at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete complying with standard specification and as directed by the departmental officers. - Single leaf of size 1.00m x 2.10m.

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam.

Supplying & fixing of WPC door shutter, extruded as a single core board with rigid WPC compound with the thickness of 25mm (+/- 1mm) & minimum Bulk Density of 550KG/Cub.MT & shore hardness of 55. The door shall be a plain matt board as decided by the Engineer-in-Charge of the department. The WPC door shall be fixed onto the Aluminium "G" type channel with Wheel and the door shall have 2 Hooks in SS, 2 Handles 4" in SS (Slinding Door) etc., complete and as directed by the departmental officers.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers.

Flooring with Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Dadooing walls with Dadooing with printed design colour glazed tiles of size 300 x 450 x 8mm conforming to IS 15622 of following sizes in Cement Mortar 1:2 (One Cement and Two crushed stone sand),10 thick with Mortar Plasticizer and pointing the joints with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg. / sq.m. neatly in all floors, curing, etc., complete complying with standard specification and as directed by the departmental officers.(The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., complete complying with standard speicification and as directed by the departmental officers.(The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work)

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.-Mixing by mechanical means

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete complying with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of 75mm thick slab (using 20mm HBGS Jelly) in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing of marble of 0.61*1.22m.,18/20mm thick in all floors for urinal partition including for labour charges for fixing and polishing etc.,

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 12mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including mortar plasticizer at 200ml per 50Kg of cement used, finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Painting New Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect., complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supplying and laying of Rubber moulded Hydraulic pressed paver block 83mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers.

Supply and fixing Chain link fencing of size 50mmx50mm using 10 Gauge Galvanised Iron Wire (of all sizes)

Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground leveL

25 mm dia Pipe

32 mm dia Pipe

40 mm dia Pipe

Supplying, laying and jointing UPVC pipes of Class 5 (having working pressure of 10 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply Below ground level.

25 mm dia Pipe

32 mm dia Pipe

40 mm dia Pipe

Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements

25 mm dia Union.

32 mm dia Union.

40 mm dia Union.

25 mm dia Elbow.

32 mm dia Elbow.

40mm dia Elbow.

25mm dia Tee

32mm dia Tee

40mm dia Tee

40 x 32 mm dia Reducer

32 x 25 mm dia Reducer

25 x 20 mm dia Reducer

20 x 15 mm dia Reducer

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

40mm.dia G.M.Gate valve

32 mm.dia G.M.Gate valve

25 mm.dia G.M.Wheel Valve

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with “P” or “S” trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white European Water Closet of best quality and approved make with 100 mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn,teak wood plugs, brass screws, etc., including supplying and White glazed European Water Closet with 10 litre capacity PVC flushing tank fixed on to wall with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm with pedestal with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia “B” class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing of SS Sink of size 1200 x 550 x 180mm

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm

Supplying and fixing in position CP Two Way Bib Cock with Health Faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing in position 15mm dia brass Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing position PVC Nahani Trap of size 100 x 75mm with pvc gratings with best of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level

110 mm dia Pipe

75 mm dia Pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75mm dia Elbow

75mm dia Tee

75mm dia Tee with single door

75mm dia Bend

110mm dia Elbow

110mm dia Tee

110mm dia Tee with single door

110mm dia Bend

Supplying and filling 20mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and filling 40mm guauge HBGS stone jelly for dispersion trench including loading conveying and unloading and as directed by the departmental officers etc. complete complying with standard specification.

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing best quality and make of ready mixed HDPE water storage Water tanks having 1000 litres capacity -made of PVC materials- including necessary provision for conveying, jointing delivery line, scour pipe, over flow pipe etc., and lifting the tank to the top of the building placing in position etc., complete as directed by the departmental officers. (The plastic water storage tank should be got approved by the Executive Engineer before fixing in position.)

Supplying and fixing of Container formet Shape Kiosk of 2 nos 3mx3m Shop with necessary Door, ventilation, and necessary interior shelf arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing of sign boards of 1000 x3000mm printed on 2mm thick Aluminium sheet fixed on M.S pole of 75mm dia and required frame fabricated using steel hollow sections of size 35 x 25mm and properly painted as per detailed drawing including all works such as earthwork excavation, PCC with CC 1:5:10 - 100mm thick and CC 1:2:4 - 150mm Above ground level etc., complete as directed by the departmental officers.

Manufacturing, supplying and fixing of Directional sign boards of 300 x 1000mm printed on 2mm thick Aluminium sheet fixed on M.S pole of 75mm dia and required frame fabricated using steel hollow sections of size 35 x 25mm and properly painted as per detailed drawing including all works such as earthwork excavation, PCC with CC 1:5:10 - 100mm thick and CC 1:2:4 - 150mm Above ground level etc., complete as directed by the departmental officers.

Manufacturing, Supplying and Erection in position of 100 liter twin plastic dustbin with stand ,complete as directed by the departmental officers.

Supplying and Fixing Round tables 2.50m dia are designed to be Gramite and wooden Moddle type etc., complete complying with standard specification and as directed by the departmental officers

Supplying and Fixing Beach chairs are typically portable, foldable units with a lightweight but sturdy frame (aluminum or steel) and a canopy made of durable, UV-resistant fabric like Oxford cloth or polyester etc., complete complying with standard specification and as directed by the departmental officers

Supply and fixing of Swing 2-Seater with Rubber Seat: A-Frame :1 ½” Galvanished ‘B’ class pipe Top Rail : 2” Galvanished ‘C’ Class Pipe Seats : Rubber Chain : 8mm Stainless Steel Chain (Grade-304) Greater Chennai Corporation Playfield Department SCHEDULE OF RATES 2023-24 Chain : 8mm Stainless Steel Chain (Grade-304) Painting with PU coating Product area: 10’ft * 9’ft Play area :15’ft * 15’ft . The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (1 CPE-105A)

Spiral Slide Senior FRP: [Component] Ladder :Galvanished ‘B’ Class pipeSlide : FRP Spiral slide BED LEG :Galvanished ‘C’ Class pipe [Measurement] Height :6 ½ ft.FRP thickness 6mm. (Reinforced Polymers in 7 Layers) 450 CSM Matt, 600 Roving mat, Isotolic gel coat with UV pigment. Painting with PU coating Painting with PU coating width :10ft [Required area] Product area: 6’ft * 10’ft Play area :8’ft * 15’ft The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. ( 4 CPE-108)

Supply and fixing of Roller Slide 8ft:Measurement] Height:5ft Width: 2ftSliding Chute:10ftRoller thickness:3mm PVC Roller with½ inch galvanished pipes.No. of Rollers.46 with multicolours.Painting with PU coating [Required area]Product area: 21/2’ft * 14’ft Play area:6’ft * 18’ft The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. ( 5 CPE-109)

Supply and fixing of Sea – Saw 2 seater – FRP 24 CPE-128 Height: 20” width:96’’ X 30’’ pa frame:11/2’’ GI pipe,2.5mm thickness, B Class, arm:2”GI pipe, 4mm thickness, C class. Paint:pu coating. FRP seat with 450csm, seat size 15”*14 The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (24 CPE 128)

Supply and fixing of Merry go round – 6 Seater (FRP) Height :3” GI Pipe, 2.5mm thick, b class Seat size:15” X 14”, paint: pu coating. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (24 CPE 128)

Supply and fixing of Horse Rider:[Component]LEG :Galvanished ‘C’ Class pipeGalvanished ‘B’ Class pipe Spring: Mild steel spring horse : FRP with Isotolic gel coat with UVpigment. Painting with PU coating [Required area]Product area: 3ft*3ft Play area:5ft*5ft [Measurement] Width:3ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (9 CPE 113)

Supply and fixing of Duck Merry Go Round: [Measurement] Height:2ft Width:7ft [Component] LEG :3” Galvanished ‘B’ Class pipe Seat :FRP Duck -4Nos. with Isotolic gel coat with UV pigment. Support : 1 ½” Galvanished ‘B’ Class pipe. Painting with PU coating [Wanted area] Product area : Ø 7’ft Play area : Ø 9’ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (10 CPE 114)

Supply and fixing of Jungle Gym: [Component] Galvanished ‘B’ Class pipe painting with PU coating [Required area] Product area :5’ft * 5’ft Play area: 7’ft* 7’ft. The good quality of materials used and all other arrangements etc, including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. (12 CPE 116)

Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) :

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts.

Supplying and planting of ORNAMENTAL Flowers or various variety and arranged in such a manner red soil including conveyance at site of works and planting at the places shown by the departmental officers including cost of manuring and maintaining for 180days etc.,.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Barderplaints (Hemalis patten,Exora, Alamanda, Ujaniva)

Foliage Shrubs ( Clerodendron, Nicodia)

Hedge Plants ( Golden Dhurandha )

Single Trunk Palm (Foxtail Palm)

Multi trunk palm (Areca palm)

Ground Covers (Panthanus, BlackLilly, Landana purple, Ibiscus, Arali)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil) Higher End

Supply and Run of 2 of 2.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in 25mm dia GI pipe (class B ) suitably bent at both ends with necessary angle iron upright and end support for service connection mains

Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC)

Supply and fixing of 4 Feet LED 18W Fitting with LED 18W tube (Higher End complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Higher End

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion

Supply and Run of 2 of 2.5 sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade on 7/20 GI wire for service connection mains

Supply and run of 1 of No.8 SWG GI wire for earth connection

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and laying of 2x6 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and aying of 4 x 10 sq.mm. PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of 5A or 10A or 20A AC single phase 230V ,50Hz Watt hour metre on suitable TW box complete with earth connections

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of WT bulk head fitting with guard suitable for 15 W LED Bulb

Supply and fixing of fancy glass shade and 7W / 9W LED bulb

Supply and fixng of TNEB meter board suitable for 3 phase 100A service connection made up of suitable angle iron frame work of size 2 feet x 1-1/2 feet using angle iron of size 1-1/2" x 1-1/2" x 1/4" rigidly fixed on wall covered with hyle msheet of size 2 feet x 1-1/2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 100A fuse units (500V), 1No. neutrallink, copper earth flat of size 1"x1/4" with interconnection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete

Supply and fixing of 8 mt Single bracket GI pole (114.30mm OD x 5.40mm thick x 4500mm length,88.90mm OD x 4.85mm thick x 1500mm length, 76.10mm OD x 3.25mm thick x 1750mm length) with base plate of 300mm x 300mm x 6mm MS base plate, duly welded at the bottom with concreting with construction of Masonary pedestal with suitable MS box to house 6A MCB with suitable angle iron frame work, with door and with lock and key arrangements with supply and fixing of 1No 100W LED street light fitting with heat resistant toughened glass with IP 65 Prtection in suitable dia GI pipe (Class 'B') complete with PVC unsheathed Copper leads MS clamps and aluminium painting (Philips / Havels /Crompton/equivalent)

Supply and fixing of coil earth to street light poles with No.8 SWG GI wire of 11.5 meters of length in which 10 meters of total length compressed in to a coil of one metter length (75mm to 100mm dia) connected suitable with hexagonal eath bolt of size 8mm in to 25 mm welded on the pole at one end with a coil position fixed on the earth.

Supply and fixing of Unique concept 10W LED Bollard post top latern in IP 66 to ensure sustainable performance in all sections and aesthetics which keeps the surrounding lively concreting with construction of Masonary pedestal with PVC unsheathed Copper leads MS clamps and aluminium painting (Philips / Havels /Crompton/equivalent)

Supply and laying of 4 X 16 sq mm PVC armoured aluminum LTUG cable in a trench to be excavated at dept of 0.75 mtr putting 0.15 layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 4 X 16 sq mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and fixing of brass cable gland for 4 X 16 sq mm PVC armoured LTUG cable with earth connection

Design, Supply, Testing and commissioning of 16m Highimast lighting unit (Philips/ Bajaj make or ISI equivalent) complete with hot dip galvanized and suitable for 45met/sec wind velocity and above. The Highmast structure should have head frame, single ring and provided with galvanized lantern carriage suitable for 1 x 8 Nos of 150W LED luminaries with manual ladder arrangement and feeder pillar Box with Automatic timer system including wiring etc: complete as specified in the relevent ISS. Erection of the High Mast by providing concreting 1:2:4 mix R.C.C masonary foundation pedestal. The RCC pedestal projection should be 30cms above the ground level. The feeder pillar box may be mounted in RCC pedestal with projection of 30cms above the ground level & foundation suitable to the safe bearing capacity of the soil at 12T/M2 at 1.5m depth of below round level and necessary galvanized foundation bolts nuts washers and Anchor plate & Template etc: Complete as per standard specification of IS-875-1987.Supply and fixing of specially Heavy type water proof, Dust proof integral luminaries fitting provided with 150Watts LED High lumen Flood light fitting (Philips/Wipro or Equivalent) with control switch gears, Allas coated reflectors, with cable connection etc complete as per standard specification along with the supply & fixing of hot dip galvanized lightening arrester and necessary accessories etc: complete as per standard specification.Supply Erection and commissioning of 0.90m x 0.45m x 1.20m floor mounting feeder pillar box and sufficient numbers of ventilation opening should be provide & supporting M.S angle frame with 63A main switch 1no, 63A fuse unit 3 Nos and 63A power contactor with automatic timer arrangment. The feeder pilllar box should be painted with red oxide and two coat of anit corrosive enamel paint including all other allied material etc and supply and fixing of aviation lamp fitting with base and coupling arrangments ect. Complete as per standard specification. (SOR XV Part 'O' 3)

Supply and laying of 31/2 X 25 sq mm PVC armoured aluminum LTUG cable in a trench to be excavated at dept of 0.75 mtr putting 0.15 layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and clamping of 31/2 X 25 sq mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps

Supply and fixing of brass cable gland for 4 X 16 sq mm PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 1/2 X 25 sq mm PVC LTUG Aluminum armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

GST at 18%

Please Enable Macros to View BoQ information