Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹56.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST REASONABLE BID | |
| 2 | L2₹65.0 L+₹7.5 L (13.0%)Rejected-Finance C 488 SC PLOT NO 10 EKTA NAGAR NEAR ANANT LEWIS PUBLIC SCHOOL BANAR ROAD NANDRI PO SARAN NAGAR JODHPUR 342015 RAJASTHAN | JODHPUR | JODHPUR | RAJASTHAN | 342015 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹68.3 L+₹10.8 L (18.8%)Rejected-Finance PLOT NO 361 FLAT NO 06 FIRST FLOOR SECTOR 11 HIRAN MAGRI UDAIPUR 313001 RAJ | UDAIPUR | UDAIPUR | RAJASTHAN | 313001 | L3 | Rejected-Finance NOT LOWEST |
Tender Value
₹70 L
EMD Value
₹1.3 L
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY JODHPUR
CWE ARMY MULTAN LINE ARMY AREA JODHPUR 342010
COMPREHENSIVE MAINTAINANCE AND REPAIR TO B/R AND E/M SERVICES AT MIL STN UDAIPUR UNDER AGE (I) UDAIPUR
2023_MES_603500_1
82324/40/E8
Open Tender
Civil Works
Item Rate
330 days
UDAIPUR
AS PER NIT CONDITIONS
8 documents required · 8 mandatory
₹1,000
AGE (I) UDAIPUR
₹1.3 L
Yes
19 Sept 2023
15 Jun 2023
1 Sept 2023
15 Jun 2023
26 Aug 2023
12 Aug 2023
16 Jun 2023 - 6 Jul 2023
Amount
Notes- Applicable for all items:- (a) Establishment of complaint cell:- (i) Complaints cells will be established at each residential/RWAs/Colony and OTM Accommodation (As per locations given by Engineer-in Charge/GE). The numbers of complaints cells in the ibid contract will be two (02) only. (ii) Contractors will deploy manpower/tradesman with requisite tool & plant for smooth functioning of all complaint cells under subject work. The details per complaint cell is as given below :- (aa) Data Entry Operator - 01 per complaint cell. (ab) Attendant - 01 per complaint cell. (ac) Supervisor - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in charge. (ad) Tradesmen & Helpers - As required for management of all the complaint cells under subject tender in consultation with GE/Engr-in-Charge and will be present in all complaints cells. The numbers of the tradesman shall be adequate to address all the complaints on daily basis. (ae) The Data Entry Operators, Attendants and Supervisors will be deployed from 9AM to 5 PM on all complaint cells to manage the complaints cell.
Notes- Applicable for all items:- (a) Establishment of complaint cell (Contd):- (iii) The contractor will provide compatible computer system, printers, peripheral, consumables, internet connection/Dongle for each complaint cell alongwith requisite furniture for functioning of complaint cell and storage of store as required. (iv) The complaints in the cell will be received through complaint register / site orders book / Verbally / Telephonically / WhatsApp / Mobile / ARMAAN or any other mode/system as evolved and intimated by JE/Engr-in-Charge. The contractor shall take immediate action to register and attend all the complaints. (v) The complaints will be addressed through complaint slips and contractors will prepare abstract of all the complaints received and action taken thereof on daily basis and will submit to JE/Engr-in-Charge. (vi) Feedback :- Complaint slip will be having a feedback system from user which will be obtained for each complaint and will be compiled daily and submitted by contractors to JE/Engr-in-Charge.
Notes- Applicable for all items:- (vii) Dress Code:- (aa) Deployed manpower/tradesmen to attend and resolve the complaint shall wear proper uniform. Dress code for plumber, carpenter, scavenger and Electrician etc. shall be approved by Engr-in-Charge with monogram/badges which shall be fixed on the dress. (ab) The number of workers shall be increased based upon number of complaints and quantum of work involved during working hours as decided by JE/Engr-in-Charge.
Notes- Applicable for all items:- (viii) T&P :- (aa) The contractor is responsible to provide all T& P to all the manpower deployed, items such as Drill Machines, cutters, welding machines, scaffoldings etc as and when required at site. (ab) Any other misc works/services connected with user facilitation as per direction of Engr-in-Charge. (ac) The responsibility of taking the tradesmen to complaint site will be of contractor. (ix) Sign Boards :- For each complaint cell, adequate flex sign board of approved size will be placed in complaint cell by contractor. The content of the flex board will be approved by Engr-in-Charge/GE.
Notes- Applicable for all items:- (b) Penalty Clause Contractors will pay penalty on account of non addressal of complaints in given time frame and quality of feedback as per matrix given below. The penalty will be levied by Engr-in-Charge/GE after ascertaining the quality feedback given by user and time taken to address the complaints and justifiable delay, if any. The penalty matrix is as given below :- PENALTY Time delay Satisfactory Partially satisfied Not satisfied Less than 24 hrs Nil Rs.100 Rs.200 24 hrs to 48 hrs Rs. 200 Rs.300 Rs.400 48 hrs to 72 hrs Rs. 400 Rs.500 Rs.600 72 hrs and more Rs. 600 Rs.700 Rs.800 c) Management of urgent nature of complaints such as leakage, water over flow, sewage, Airlock leakage, No electricity on holiday and after 5 PM till 9 AM everyday will also be the responsibility of contractor. For the same adequate tradesman and helper of lack type etc will be made available in each complaint cell by the contractor. (d) All above aspects shall deemed to have been included in the quoted price by the contractor. (e) Recovery on non wearing of uniform :- The employee and labourers engaged by the contractor under this contract shall wear neat and clean uniforms as approved by Engineer-in-Charge along with name badges, else recovery shall be made @ Rs 100/- per person per day. (f) The quoted rates shall be deemed to be included of all provisions mentioned above. The decision of accepting officer in this regard shall be final and binding and without prejudice to all. No claim/representation shall be entertained in the subject matter.
Notes- Applicable for all items:- (g) Cost of T&P (Incl Ladders) , misc sundry materials , Labours , dresses for labours ,& other safety gears as required shall be deemed to be included in the quoted rates by the contractor for the respective items. (h) The adequet no of workers as required per day to address the day to day maintenance works shall be deployed by contractor. (a) Highly Skilled Plumber/Pipe Fitter (b) Highly Skilled Carpenter (c) Mazdoor/Helper for Pipe Fitter & Carp - (d) Highly Skilled Mason with one Helper - (As & when required) (e) Highly Skilled Welder with one Helper - (As & when required) (f) Highly Skilled Electrician (g) sewer man
Checking and attending to leakages in bib taps, mixer, stop cocks, angle valves, flushing cistern, GI pipes etc including removal of air lock/blockage of water in GI tubing, cleaning the pipe or fittings including replacement of defective material/items and all connected plumbing works etc., complete all as specified and directed.
Checking and attending to welding work in repairs to steel windows, handles,door springs, iron frame of doors, rolling shutter garrages and other iron misc works, repair by welding ( run or spot welding as per site require ment) including replacement of defective items/material alongthwith & including welding machine gloves, welding glass, welding rod any other tools required, as per requirement, complete all as specified and directed.
Checking and attending to carpenter work in repairs to joinery (wooden/steel/aluminium) of iron/aluminium mongery, pelmet box, door spring, rolling shutters etc requiring carpentery work and carrying out minor repair such as tighting of screws/nails, wire of false ceiling, easening of joinery, door spring etc including replacement of glass panes, wirelcoth to joinery or any defective items/materials, complete all as specified and directed.
Note for Item 3 to 5 :-
(i) Contractor or his supervisor / site Engineer will report daily at 0900 hrs at complaint cell for collection of complaints from the concerned JE/AGE in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs , the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately. If Engineer-in-Charge is satisfied with contractor view, no recovery will be made on this account. However complaints related to sewage line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is 'Sunday' or 'Gazetted hoidays' and nothing extra shall be payable to contractor on this account.
(ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesmen and enter after completion in complaint register.
(iii) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday and Gazetted holiday commencing from date and time of notifying the complaint slip failing which a penality @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30X complaints slip books as per performa let with 400 leaf each booklet.
(iv) Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as Supply only
(v) The labour/tradesmen required for replacement of 'Supply only' items are included under this item. However labour charges for items where indicated 'M&L', 'S&F' and 'in repairs' shall be included in respective items.
(vi) The above all aspect shall deemed to be included in the quoted rate of the respective item
S&F in repair 0.56 mm dia MS galvanised wire cloth with average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples, beads or in steel windows/doors complete all as specified and directed.
S&F in repair 3 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.
S&F in repair figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane, complete all as specified and directed.
S&F in repair 10mm thick toughned glass as in hinged doors, partitions automatic door sand similar work including cutting to shape, drilling holes required including taking out old broken/ unservicable glass complete all as specified and as directed
S&F in repair figured glass, 4.8mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane, complete all as specified and directed.
S&F in repair 300 mm, mild steel ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed.
S&F in repair 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished, complete all as specified and directed.
S&F in repair brass ,4 lever Locks, cupboard, grade I, size 50 mm fixed with shutter with necessary cutting and fixing, complete all as specified and directed.
S&F in repair Door closer aluminium (extruded) hydraulically regulated designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed, complete all as specified and directed.
S&F in repair double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed, complete all as specified and directed.
S&F in repair heavy duty hydraulic floor door spring fixed to floor for heavy toughend glass door including top ss bracket with pivot for fixing of glass with glass partition including all taking down and refixing of heavy glass any type,, complete all as specified and directed.
S&F in repair 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.
S&F in repair 75mm long Hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screw, , complete all as specified and directed.
M&L in repair for 2nd class hard wood plain fillets, square, rectangular in section, making rebates for fixing prelaminated cupboard shutters clean sawn, secured with nails or brads in sectional area exc 13 & n. exc 25 sq. cm fixed with nails, , complete all as specified and directed.
S&F in repair 16 mm thick prelaminated particle board exterior grade,prelaminated side with decorative choice lamination& side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed
S&F in reapir in repair Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of width of flaps (when open) in 30mm, , complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n. exc 1.5 Sqm each and removing from site, complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size area exceeding 1.5 sqm and not exceeding 4.00 sqm each, complete all as specified and directed.
Taking down shutters of any description, area exceeding 1 sqm and not exceeding 2.00 sqm each, complete all as specified and directed.
Taking down shutters of any description, area exceeding 2 sqm each, complete all as specified and directed.
Material and labour for taking down and refixing in same opening wood shutter exc 1 sqm but not exc 2.00 sqm including easing & adjusting and refixing with same hardware etc., complete all as specified and directed.
S&F Pressed steel frame for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming, complete all as specified and directed.
All as per item No 27.00 here-in-above but frame size 125 x 60 mm with double rebate.
Material and labour for PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame, complete all as specified and directed.
Material and labour for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed.
S&F 35mm thick, IInd class hard wood plain, framed, panelled factory made shutters (two panel) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35 mm thick, 2nd class hard wood , glazed & skeleton factory made shutters, open rebated & prepared to receive glass, gauze etc. (without sash-bars), edges of framing plain, chamfered or rounded fitted with cut and metred beads for securing glass etc., sizes of members of shutters as specified in SSR Part-I, Section-8, clause 8.20(a), complete all as specified and directed.
S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides , complete all as specified and directed.
S&F providing & Fixing factory made 100% Solid WPC (Wood Polymer Composite) -Door Farme 90mm x 45 mm (Moulded) Single Rebated made from Wood Polymet Compositge (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Ruce Husk/Wheat Husk) and Non toxic additives fabricated with meter Joints after appliying PVC solvent cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm & manufactured by an ISO 9001 - 2015 Certified Company, having good screq holding capcity (Screw Withdrawal srength of (Min, 990 N) Minimum Compressie Strength of 58 N/mim2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A catgegory with property of being termite / borer proof, water / Moisture Proof & Fire retandant & Fixed in position with and including SS Dash Fasteners / Hold Fast of required dia and length, al as per specifications drawings as directed by the Engineeer-in-Chage, Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed.
S&F in reapir PVC factory made shutter solid, PVC moulded prelam sheet both side front and back plain or coloured shutter with particle board core 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design in framing at site as per specifications & drawings , complete all as specified and directed.
Material and labour for powder coated anodised aluminium ( minimum thickness of powder coating 50 micron), as in frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified, complete all as specified and directed.
S&F powder coated anodised aluminium ( minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., complete all as specified and directed.
S&F powder coated anodised aluminium ( minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung / sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) , complete all as specified and directed.
S&F in reapir 5.0 mm thick sheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed.
S&F galvanized mild steel wire-cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete .
M&L for preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified and as directed .
S&F in repair vitreous china squatting pan "Orissa" pattern, size 580 x 440mm white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe,lime/cement concrete bedding and making good to the floor complete all as specified and as directed.
S&F in repair vitreous ware wash down water closet [Pedestal Pattern], coloured as approved [ETWC] including plastic water closet seat back soft closed pattern white/black with flat bottom and connection to drain (or outgoing) pipe & to flushing pipe anti syphonized pipe etc., and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap connecting to drain pipe and flushing pipe etc., complete all as specified and as directed.
S&F in repair vitreous china EWC one piece (Single Piece) WC with PP Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern Fittings, Fixing Accessories And Accessories Set, Size: 360x660x755 mm, S Trap- 220 mm, including taking down old vitreous china EWC and cistern, complete all as specified and as directed.
S&F in repair Plastic water closet seat, any colour, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointing, complete all as specified and as directed.
S&F in repair 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 450 mm long with PTMT nuts, complete all as specified and as directed.
S&F in repair vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and as directed.
S&F in repair vitreous china ware wash hand basin, white, flat back of size 550 mm X 400 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe, complete all as specified and as directed.
S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed.
S&F in repair urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified & as directed.
S&F CP brass health faucet fitted with bracket, screwed down for iron pipe or for brass ferrule complete all as specified and directed.
S&F in reapir in repair Jet spray for water closet pan pedestal pattern, complete all as specified & as directed.
S&F in repair magnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm long, complete all as specified & as directed.
S&F in repair self closing/auto Casement type hinges 90/180 degree, complete all as specified & as directed.
S&F in repair stainless steel kitchen rack, basket Trolley grill type or perforated type or wire type or other any type of approved make, complete all as specified & as directed.
S&F in repair Telescopic steel channel ball bearing drawer channel silver/chrome plated size 250/300 mm etc, complete all as specified & as directed.
S&F in repair chromium plated shower rose 190mm round shape fancy type fixed to 15mm bore pipe, complete all as specified & as directed.
S&F in repair 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections, complete all as specified & as directed.
S&F in repair 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections, complete all as specified & as directed.
S&F in repair Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc., complete all as specified & as directed.
S&F in repair Glass shelf size 500 X 125 mm radius with and including bracket and glass complete set etc., complete all as specified & as directed.
S&F in repair stainless steel Towel Rack with lower hanger size 24'' (600 mm) fixed to walls with hook etc., complete all as specified & as directed.
S&F in repairs HDPE PVC lid (tank cover) with locking arrangement for 500/1000 Ltrs capacity PVC tank, complete all as specified & as directed.
S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe , complete all as specified & as directed.
S&F in repair chromium plated brass body, fancy type, bath Mixer 3 in 1 System with provision for overhead and hand shower suitable 15mm bore of pipe and fixed, complete all as specified & as directed.
S&F in repair chromium plated, fancy type, pillar taps, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shank S&F fly nuts, suitable for 15mm bore steel tubing, complete all as specified & as directed.
S&F in repair Bib tap fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified and as directed .
S&F in repair angle valves/stop valves fancy type, chromium plated, cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for union, suitable for 15mm bore steel tubing, complete all as specified & as directed.
Demolition of cement concrete unreinforced in ground floors, and pavings not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to outside MD land complete all as specified & directed
M&L 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded stone aggregate laid in alternative bays as in plinth protection including finishing the surface even & fair & filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight complete all as specified & directed
M&L 40mm thick PCC 1:2:4 type B-1 by using 20 mm graded crushed stone aggregate, as in flooring including finishing the surface even and smooth without using extra cement complete all as specified and as directed.
Supply only 38mm wide and 3mm thick glass dividing strip, complete all as specified & directed
Demolition of stone slab and tiling of any description or thickness laid in bedded and pointed in any mortar, complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises., complete all as specified & directed.
M&L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate, as in sub base of flooring including finishing surface of concrete topping even and rough to receive floor finishes, complete all as specified & directed.
M&L for 15-18 mm thick machine cut udaipur green marble slabs, as on cooking platform/shelf/flooring etc. and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting polishing, half round moulding and cutting of holes for gas pipe, laid over and including 15mm thick screed bed in cement motar CM 1:4 complete all as specified & directed.
M&L for 18-22 mm thick machine cut Kota stone slab (of size not less than 55 cm x 55 cm in flooring and 120 cm x 25 cm in treads) including rubbing and mirror polishing and jointed with grey cement slurry mixed with pigment to match shade of the slab including half round edge moulding, cutting, waste, rubbing and polishing (Granite finish) laid over and including 20mm thick screed bed in cement motar CM 1:4, complete all as specified & directed.
Material and labour for 300x300x20-25mm thick chequered cement concrete tiles, rubberised moulded with grey cement and pigment set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in cement motar CM 1:4, complete all as specified & directed.
M&L for Glazed coloured ceramic tiles of size 600mm x 300mm x 7 to 8 mm thick on vertical surface such as dado/ skirting etc., over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.
Material and labour Non skid coloured ceramic tiles 7 to 8 mm thick area of each tils exc.0.11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed
All as per item No. 82.00 but as in vertical surface i.e. skirting, dado & riser etc. over and including 10mm thick rendring in CM (1:4) complete all as specified and directed.
M&L for Vitrified light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles not exc. 0.36 sqm, in floors etc. set and jointed with cement mortar and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement motar CM 1:4, complete all as specified & directed.
M&L for Vitrified light coloured tiles, of size 600 x 100 mmX8-9 mm thick on polished, as in vertical surface i.e. skirting, dado & riser etc., set and jointed with cement mortar and pointed in white or coloured cement to match laid over and including 10mm thick screed bed in cement motar CM 1:4, complete all as specified & directed.
M&L for 20mm thick granite (of any type) work (table rubbed and polished), as in steps, jambs, pillars, win dow-cills, cooking plat forms and like similar type work, including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite laid over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed.
Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete as directed.
Taking down cement or cement lime plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off the premises complete all as specified and as directed.
M&L 10 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete wall surfaces and finished the surfaces even and smooth with out using extra cement and preparation of new plastered or unplastered surfaces and applying three coats of white wash, complete all as specified and as directed.
M&L 15 mm thick rendering in cement mortar 1:4 mixed with water proofing compund, on fair faces of brick or concrete or stone masonry external wall surfaces and finishing the surface even and fair without using extra cement and preparation of new plastered or unplastered surfaces and applying two coats cement base paint all as specified and as directed. Note : (i) WPC shall be measured and paid separately.
M&L for rendering 5mm thick in cement mortar 1:3 on concrete ceiling surfaces, finished even and smooth without using extra cement, and preparation of new plastered or unplastered surfaces and applying two coats of white wash, complete all as specified and as directed.
M&L repearing and making good of out side portion of window such as jambs, cill & head portion of windows and chajjas area exc. 0.5 sqm but not exc. 1 sqm at FF of bldg with rendering 15mm thick on stone masonry / brick/concrete/RCC surfaces as in CM (1:4) mixed with including liquid water proofing compound surfaces finished even & smooth (without using extra lime or cement) including taking down cement or cement lime plaster, any description etc. and preparation of surfaces and applying two coats cement base paint, complete all as specified and as directed.
Supply only integral water proofing compound
S&F in repair rubber based door strip fixed to bottom edge of door shutter using small nails / self-adhisive type to minimise gap & avoid entry of insects inside house width & length as required at site, complete all as specified and as directed.
S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed.
S&F in repair stainless steel type curtain rod 22 to 25mm dia as per sample, complete all as specified and as directed.
S&F in repair purpose made brackets trade pattern for stainless steel decorative type curtain rods suitable for holding 22 to 25mm dia as per sample, complete all as specified and as directed.
S&F in repair of stainless steel decorative fincals(round type with mirror optic finish)trade pattern for decorative type curtain rods suitable for 22 to 25mm dia curtain rods as per sample, complete all as specified and as directed.
S&F in repair of stainless steel decorative fincals wall to wall trade pattern suitable for decorative type curtain rods 22 to 25mm dia as per sample as in repair complete all as specified, complete all as specified and as directed.
M&L for fabrication of pressed steel cupboard shutter using 1mm thick MS plain sheet with frame 1.25mm thick bent to shape including two coat of synthetic enamel paint on internal surfaces & two coat of hammer tone finish on external surface alongwith locking arrangement mortice lock ,handle etc complete all as specified as per drg No CEBZ/TD/12/2008 sheet 1/3 to 3/3., complete all as specified and as directed.
Supply & fixed in repairs stainless steel sink with drainage board , made out of 1.00mm thick sheet for kitchen oe laboratory with plug,washers, waste pipe, cast irn cantilever bracket of overall size 915x460mm bowl size 410x330x160mm, complete all as specified and as directed.
Supply & fixed in repair stainless steel plate rack of size 900x900x200mm made out of 1.00mm thick sheet, complete all as specified and as directed.
S&F in repair CP soap dish all as specified and directed.
Easing of door shutters, window shutters, kitchen cupboard shutters, show case shutter drawers incl fixing of screws for easy closing/opening and tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts with new screws etc., complete all as specified and directed.
Repairs existing aluminium door/ window shutter including frame with completely/partially taking down door shutter and tightening of all screws, replacing including provision of unservicable hinge, handle, lock, aluminium plate & floor door stopper, complete all as specified and directed.
S&F in repair 100 mm MS butt hinges medium weight cold rolled mild steel ISI marked fixed with wooden screws, complete as specified and directed.
S&F for mild steel handle right or left matching to existing for fixing with steel window with suitable nut bolt/welded material, complete all as specified and directed.
S&F for mild steel pag stay matching to existing for fixing with steel window with suitable nut bolt/welded material, complete all as specified and directed.
Material and labour for framed work Fe 410-W (Grade - E-250) as in door or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering, doors, Cool Stand etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, complete all as specified and directed.
S&F solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in SSR Part-II 2020, complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in SSR Part-II , 2020 as specified and as directed.
S&F Butt hinges, 100 mm long medium weight, cold rolled mild steel, ISI marked, complete all as specified and directed.
S&F in repair aluminium handles extruded type of size 125mm, complete all as specified and directed.
S&F in repair 150 mm long, aluminium anodised, barrel tower bolts, of extruded section ISI marked, complete all as specified and directed.
S&F 300 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cost or extruded sections or cost alumminium alloy, complete all as specified and directed.
S&F 140mm overall length of cover plate floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring with lower portion fixed with hard rubber, fixed in floor complete all as specified and directed.
S&F in repair 300mm long MS sliding door bolts ISI marked bolt type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed.
S&F in 150 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed.
S&F aluminium handles extruded type of size 125mm, complete all as specified and directed.
Material and labour for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including a coat of red oxide primer, complete all as specified and directed.
Taking up or down steel tubing and connections, 15 mm bore fixed on walls, floors or ceiling etc., complete all as specified and directed.
Taking up or down steel tubing and connections, 20 mm bore fixed on walls, floors or ceiling etc., complete all as specified and directed.
S & F in repairs 20 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc, complete all as specified and directed.
S & F in Repairs 25 mm bore of pipes 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot and cold water supply including all PP-R plain and brass threaded polypropylene random fittings fixed complete to walls, ceiling, or in floors etc, complete all as specified and directed.
M & L in reapir Angle stop valve of PTMT any colour high pressure screwed for iron pipe, complete all as specified and directed.
S & F in repairs PVC flushing cistern valveless, syphonic action kit and washers type, 10 litres capacity with inlet, ball valve float and handle any make with exisiting fixed,, complete all as specified and directed.
S&F Tubular towel rail aluminium anodised 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, , complete all as specified and directed.
M & L 32 mm bore waste fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.
S&F Stainless steel gratings 100mm bore size fixed with cement motar, complete all as specified and directed.
S&F in repair PVC Flexible waste pipe 32/40 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.
S&F in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.
S&F in repair aluminium hat pegs, solid body 175mm to 250 mm , peg sets of 6 Nos peg set of good quality complete all as specified and directed
Material and labour for Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank , complete all as specified and directed.
Material and labour for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc including taking down existing tank, complete all as specified and directed.
S & F in repair, Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20 mm dia (minimum weight 210 gms), complete all as specified and directed.
Cleaning and removing all scale dirt etc from mouths of circulating pipes of water tanks of capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed.
Cleaning and removing all scale dirt etc from mouths of circulating pipes of water tanks of capacity exceeding 500 litres and not exceeding 1000 litres complete all as specified and as directed.
Checking and attending to cleaning and maintenance of sewage system including blockage/choke in WHB, bottle traps, kitchen sink/Nahani tras/floor traps, water closet, soil/waste pipe running on external walls of bldgs including junction holes of any description and sewage line of any sizes upto first manhole in running/flowing order without blockage of any description in any situation manually and mechanically as required including all equipment viz bamboo,tools, sewage pump, sewage machine etc including replacement of defective items /materials and refixing covers to manhole/ gully trap in position etc. after cleaning and removing the deposited sludge/ solid/ liquid material outside MD land complete all as spd and directed.
Note for Item 138.00 :-
(i) Contractor or his supervisor / site Engineer will report daily at 09:00 hrs at complaint cell for collection of complaints from the concerned JE in Charge in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs , the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately. If Engineer-in-Charge is satisfied with contractor view, no recovery will be made on this account. However complaints related to sewage line blockage/pipe replacement etc whatever is applicable shall be attended on same day whether it is 'Sunday' or 'Gazetted hoidays' and nothing extra shall be payable to contractor on this account.
(ii) Contractor or his supervisor/site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaint register, issue of complaints slip to tradesmen and enter after completion in complaint register.
(iii) The complaint shall be attended & defect shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday and Gazetted holiday commencing from date and time of notifying the complaint slip failing which a penality @ Rs 500/- per complaint per day (08 hrs) shall be levied upon/ imposed on the contractor and necessary recovery shall be made from his dues on this account. The contractor at the begining of contract will provide printed 30X complaints slip books as per performa let with 400 leaf each booklet.
(iv) Any item / material which are required to be replaced shall be paid under respective item under this schedule here in after as Supply only
(v) The labour/tradesmen required for replacement of 'Supply only' items are included under this item. However labour charges for items where indicated 'M&L', 'S&F' and 'in repairs' shall be included in respective items.
(vi) The above all aspect shall deemed to be included in the quoted rate of the respective item
Taking out (desilting) silt, brick bats, debris, liquid waste sludge in solid/ semi-solid state from Manholes upto depth of 1.50 mtr including pumping out sludge where ever necessary plugging diverting the flow in the drain, removing of silt/sludge in deposit away from the edge of manholes, by mechanical means such as jet auger and mechanical vacuum tank as directed including use of safety belt, mask, dry cells torch for lightening inside the manholes and taking similar precautionary measures and removing the sludge etc outside MD land in covered container and cleaning the manholes and surrounding with clean water, and closing the manhole with cover etc all as specified and directed:-
Desilting of septic tank / sewage tank at sewage pump house any size including cleaning and taking out mud/ sludge, scum, silt (both organic and inorganic nature) etc from septic tanks by mechanical means of any depth, in foul conditions and confined places including use of safety belt, mask, dry cells torch for lightening inside the tank and taking similar precautionary measures, getting out and removing the waste/ Sludge water shall be disposed off in closed container at authorized dumping site declared by local administration outside MD land as directed by Engineer-in-Charge complete all as specified and directed. Note: Net contents of sludge shall be measured at the time of removal and paid. Quoted rate of tenderer is deemed to be inclusive of dewatering as required and nothing extra shall be admissible to the contractor on this account.
Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in soft/ loose soil complete all as specified and directed.
Excavation in trenches n exc 1.5 Mtr wide and n exc 1.5 M deep and getting out in hard rock by using of mechincal plant or chisel cutting for shafts, wells, man holes and for sewage lines and foundation etc n exc 10 Sqm on plan, complete all as specified and directed.
Returning filling in of excavated any type soil including spreading leveling watering and well ramming in layers n exc 25 cm thick, complete all as specified and directed.
Removal of surplus spoil/excavated material exc. 250 m but n exc. 500 m and depositing where directed, complete all as specified and directed.
Demolition of brick and stone masnary work built in cement mortar incl all quions, arches, pillars etc. but excluding ashlar facings dressed stone work and precast concrete articles,complete all as specified and directed.
M&L brick work with sub class ‘B’ modular bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4, complete all as specified and directed.
M&L PCC (1:2:4) type B-1 using 20 mm graded crushed stone aggregate as in benching/ channels of manholes, kerbs, etc complete all as specified and as directed .
M&L PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregate) as in foundation , filling and mass concerete complete all as specified & directed
M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in coping for manhole including slightly rounded or chamfered angles and including necessary form work finishing exposed surface, complete all as specified & directed
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, initred/stopped ends.
Demolition and breaking up drain pipes (Salt glazed ware, AC or reinforced concrete) of 150mm bore set in cement mortar including PCC in bed and haunching against side, including removal of soil & debris upto 500 m, complete all as specified and as directed.
Supply, laying, testing & commissioning HDPE DWC (Double wall corrugated) 150 mm dia pipes with reqd jointing accessories of SN8 grade as per IS 16098 (Part 2) in position and joining at all level/ depths full round, amended upto date in trenches in complete including all material, labour, sectional hydrotesting (including the cost and conveyance of water to site fortesting) and comissioning as per technical Specifications, drawings, complete all as specified and as directed.
S&F 150 mm bore Salt glazed stone ware grade 'A', drain pipe laid in trenches and cement joint in cement mortar 1:1 complete all as specified and as directed .
S & F 150 mm bore Reinforced cement concrete pipes, one end socketed, class NP2, laid in trenches and jointed complete all as specified and as directed
Dismantling of cast iron / reinforced pipes of 75mm internal dia including fittings, jointed in cement mortar taking out from walls / trenches complete all as specified and as directed.
All as per item No. 162.00 here-in-above but size of pipe is 75 mm bore.
S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps complete all as specified and as directed.
All as per item No. 164.00 here-in-above but size of pipe is 75 mm bore.
S&F 100 mm CI bends (any radius), spun or sand cast pipe fittings, diminishing pieces or tapers (larger bore measured) without oval access door including replacing unservicable bend if any, complete all as specified and as directed.
All as per item No. 166.00 here-in-above but size of pipe is 75 mm bore.
S&F 100mm CI branch pieces, single (equal or unequal), spun or sand cast pipe fittings, 'Tee' & 'Y' ordinary or inverted (spigot or socket type) or with parallel branches without oval access door including replacing unservicable bend if any, complete all as specified and as directed.
All as per item No. 168.00 here-in-above but size of pipe is 75 mm bore.
Demolition and breaking up of AC rain water pipe /UPVC pipe line 100mm/75mm dia incl all fittings, complete all as specified.
Supply & Fixed for 110mm bore UPVC, soil waste drain pipe, type ‘A’ , conforming to IS 13592-1992, single socketed, in any length with rubber rings joints or jointed with solvent cement joint, laid in trenches or in floors, complete all as specified and directed. (Note- Rubber rings for pipes and fittings shall be conforming to IS 5382-1985)
All as per item No. 171.00 here-in-above but fixed to wall with MS clamps.
All as per item No. 172.00 here-in-above but size of pipe is 75 mm bore.
Supply & Fixed for 110 mm bore UPVC (SWR) bend with access door including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)
Supply & Fixed 110 mm bore UPVC (SWR) ( singleT) equal or unequal including jointing with solvent cement, complete all as specified.
Supply & Fixed 110 mm bore UPVC (SWR) branch piece,single ( singleY) equal or unequal including jointing with solvent cement, complete all as specified. .
Supply & Fixed for 75 mm bore UPVC (SWR) bend including jointing with solvent cement, complete all as specified. .(Note- UPVC bends shall be conforming to BS 4515 DIN 19531 and DIN 19534)
Cutting into existing manholes for connecting new sewage line / diverting some line to new manhole for smooth flow, suitable for 225mm bore (internal dia of pipe ) incl making good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished, reforming benching as required and as directed (Each Man hole shall be measured under this item )
S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in manhole cover stones, templates, etc size not less than 0.60 X 1.20 m, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed.
S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in gully trap cover stones, templates, etc size not less than 0.45 X 0.45 m, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar (1:4) complete all as specified & directed.
Demolition of reinforced cement concrete such in ground floors and pavings not exceeding 15cm thickness ( below or above ground level) of any description, manholer cover & etc. work including removal of debris to out side MD land complete all as specified and directed.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in landings, cover slabs (for man holes etc) chullah hoods,chajjas,water troughs,shelves and similar articles with plain faces complete all as specified and as directed .
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed.
Fixing only in repair PVC SWR pipe 110mm bore, fixed to wall or celing or laid in floor or trenches, complete all as specified and directed. Note:- PVC pipe shall be obtained from item No. 184.00 here-in-above.
Fixing only in repair PVC SWR pipe 75mm bore, fixed to wall or celing or laid in floor or trenches, complete all as specified and directed. Note:- PVC pipe shall be obtained from item No. 184.00 here-in-above.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.
Material & Labour for point wiring complete with 1.5 sqmm single core multi stranded copper conductor PVC insulated unsheathed FRLS cable 1100 volts grade drawn through in concealed and PVC casing caping with all accessories as required and directed by Engr-in charge, fixed on the surface of Wall/ roof/ceiling / dash fasteners/ wooden gutties and cadmium plated screws as per IS on existing/new if required at site sunk type CI/GI Steel/Wooden terminal with suitable for regular/Modular boxes with 3 mm thick laminated sheet concealed in wall etc. including 1.5 sqmm unsheathed copper continuity conductor connected to common earth dolly suiatble for One light / fan / bell point point controlled by one way switch., complete all as specified and as directed.
All as per Serial Item No.188 above but for one 3/5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.
All as per Serial Item No.188 above but for one 3/5 pin socket outlet 5 Amps on the independent board with other switches complete all as specified and as directed.
All as per Serial Item No. 188 above but for one light point controlled by two Nos. of, two way switches complete all as specified and as directed.
All as per serial Item No.188 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .
All as per items No 188 above for one point for (AC/geyser point ) with PVC insulated unsheathed FR cable, 1100 volt grade multy stranded copper conductor of size 4.00 sqmm (Nominal area ) including earth wire PVC insulated unsheathed 1100 volt grade cable with stranded copper conductor of size 4.0 sqmm (Nominal area ) cable common connected to earth dolly controlled by one switch complete all as specified and as directed.
Supply & Fixing Switch piano, flush type single pole, one way 6 Amp, complete all as specified and directed.
Supply & Fixing Modular switch 1 way 6A,1 module complete all as specified and directed.
Supply & Fixing switch piano type, flush button single pole, two way 5/6 amps complete all as specified and directed.
Supply & Fixing bell push flush type single pole, 5 amps complete all as specified and directed.
Supply & Fixing Buzzer, Ding Dong AC. 230 volts, single pole, complete all as specified and directed.
Supply & Fixing switch piano flush type, single pole, one way 16 Amps complete all as specified and directed.
Supply & Fixing modular switch 1 way 16A, 1 module complete all as specified and directed.
M&L socket outlet 2 in 1, 3 pin, 6A flush type complete all as specified and directed.
M&L Socket, 6A - 2/3 pin combined 2 module, type complete all as specified and directed.
M&L socket outlet 2 in 1 ,3 pin, 5 Amps and 15 Amps flush type complete all as specified and directed.
M&L Socket 6A/16A - 2/3 pin combined 2 modular type complete all as specified and directed.
S&F in replacement of Ceiling rose, 3 phase/PVC/polycarbonate, isolated body for complete all as specified and directed.
S&F in replacement of Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and directed.
S&F in replacement of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. complete all as specified and directed.
Disconnecting electric connections and taking down old unserviceable main switches/ DB’s sheet metal enclorsures 02 ways, 4 ways, 8 ways/ duly fitted with MCB’s/ cutouts 32 amps capacity including unserviceable wooden boards and making good the disturbed surface of the wall/ceiling,complete all as specified and directed.
M&L Factory made distribution board in powder coated sheet metal enclosure in double door with 200A rated bus bar,SPN 12way, 240V for fixing MCB's complete all as specified and as directed.
M&L Factory made distribution board in powder coated sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed.
M&L Factory made distribution board in powder coated sheet metal enclosure in double door with 200A rated bus bar,SPN 4way, 240V for fixing MCB's complete all as specified and as directed.
Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of foour poles (TPN) and current carrying capacity 40 Amp to 100 Amp in the DB complete with connection testing and commissioning, complete all as specified and as directed.
Supply and fixing SPN 40 TO 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.
Supply and fixing SPN 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning, complete all as specified and as directed.
Disconnecting of unserviceable sub main wiring/Service connection of any size and including steel conduit and accessories & removing from site and making good the disturbed surfaces complete all as specified and directed.
M & L for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x2.5 sq.mm + 1x2.5 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 2.5 sqmm cable with combined of R,Y & B and one run of 2.5 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.
M & L for wiring for circuit/submain wiring in PVC sonduit alongwith earth wire with the following sizes of 2x4 sq.mm + 1x4 sq.mm earth wire FR is PVC insulated copper conductor, single core cable in surface/recessed as required. Note : Two run of 4 sqmm cable with combined of R,Y & B and one run of 4 sqmm of Green colour in PVC conduit alongwith necessary clamp will be measured as one RM.
Taking down U/S earth plug and Supply & fix new metal clad 20 Amp 230 volts single pole and earth enclosure with two pin and earth plug with socket complete with one single pole MCB of 20 Amp 10 KA all as directed by Engineer-in-charge.
Material & Labour for Earthing complete as per electrical plate No 5 of MES SSR Part I with galvanised Steel plate earth electrode 600mm x 600mm x 6mm buried directly in ground in a earth pit of depth not less than 2.25 meter below ground level , the top edge of earth plate at a depth not less than 1.5 mtr below normal ground level connected to galvanised iron or steel earth lead wire 4 mm dia as earth lead by means of bolts, nuts and washers of GI & steel earth lead protected by galvanised iron or steel pipe 15 mm dia light grade and connected to main switch board or main control board watering pipe with funnel on upper side shall be 20 mm dia GI medium grade including excavation and earth work in any type of soil, PCC pit, CI frame , CI cover 10mm thick with hinged to CI frame complete. Note :-(i) Irrespective of what is shown in electrical plate , the concrete pit shall be in PCC 1:3:6 type C-1 and 40 mm thick pre-cast Cover slab of RCC 1:2:4 type B1 using 20 mm Graded stone aggregate with suitable handle. (ii) Items includes the cost of GI pipe for protection of earth strip including earth lead up to7.5 meter. Each 01
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as per directed by Engr-in-Charge.
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of uitable size from ceiling rose complete all as per directed by Engr-in-Charge.
Supply & fixing decorative wall mount light fitting with LED with bulb cap 12 watt.
Supply & Fixing building security light LED 25 watts including 25mm dia GI pipe with 120 degree bend with all accesories including fitting with point wiring in casing caping, with PVC box and switch PTS and all as specified and directed by Engr-in-chargewatt.
Taking down old U/S exhaust fan and supply and fixing metal/PVC frame exhaust fan of size 200mm sweep 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.
Taking down old U/S exhaust fan and supply and fixing PVC exhaust fan of size 150mm sweep with louver 1280 RPM, air delivery 520 CMH, power input 28 W single phase 240 Volts connected complete all as directed.
Dismantling carefully and taking out/removing of old copper winding of ceiling fans of size 1200 mm sweep any type of model or any vintage of any make and rewinding with New super enameled copper winding wire of existing gauge as per old copper winding including providing insulation and varnishing (golden), cleaning, oiling, greasing etc and refixing all the parts complete and painting of rewinded fan with blade set of any size complete, with synthetic enamel paint by spray painting including filling cavities with filler, one coat after celaning, including one meter 1.5 sqmm flexible cable 2 core, capacitor holder PVC, canopy 2 Nos all as directed.and testing in E/M Store and re-fixing at the same places . Make of winding wire-Devidayal/ USHA/Chetak of appropriate gauge as directed by Engr-in-Charge. Important Note- Ceiling Fans for rewinding/overhauling shall be done only in the MES store yard.
All as per Item No 227 above but Ceiling Fans of size 1400mm sweep
Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 12” sweep
Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 15/16” sweep
Material & Labour for supply and replacement of exhaust Fans blade as per sample suitable for size 18” sweep
Taking down from existing position/location including disconnecting/dismantling carefully of ceiling fans of size 1200/1400 mm sweep, cleaning, oiling, greasing etc and refixing at same place, testing complete all as specified & directed by Engr-in-Charge.
Supply & replace ball bearing of suitable for Ceiling/Exhaust Fan complete all as specified and directed by Engineer-In-Charge.
Supply & replace ball bearing of suitable for Ceiling/Exhaust Fan complete all as specified and directed by Engineer-In-Charge.
Supply & replace ball bearing of suitable for Ceiling/Exhaust Fan complete all as specified and directed by Engineer-In-Charge.
Supply & replace ball bearing of suitable for Ceiling/Exhaust Fan complete all as specified and directed by Engineer-In-Charge.
Supply & replacement of Gun Metal bushes of suitable size for any type and any sweep of Ceiling Fans complete all as directed by Engr-in-Charge.
Supply & replacement of Shaft of suitable size for any type and any sweep of Ceiling Fans complete all as directed by Engr-in-Charge.
Supply & replacement of rubber reel suitable for Ceiling Fans (Any type/sweep and make) complete all as specified and directed by Engr-in-Charge.
Supply & replacement of hanging clamp, nuts and bolts suitable for Rubber Reel of Ceiling Fan (any type, sweep and make) complete all as specified and directed by Engr-in-Charge.
Supply & replacement of twin core copper flexible cable of size 23/0.0076 PVC insulated 1100 volts for ceiling fans.
Supply & fixing in replacement of PVC canopy for ceiling fan 1200/1400 mm sweep.
Supply & fixing in replacement of capacitor holder for ceiling fan 1200/1400 mm sweep.
Supply & fixed in replacement of capacitor of 2.5 MFD all as specified.
Supply and replacement of ceiling fan blade aluminium metal white colour for 1200 mm sweep ceiling fan.
Supply and replacement of ceiling fan blade aluminium metal white colour for 1400 mm sweep ceiling fan
Supply and fixing in replacement of fan motor for wall mounted fan plastic body all as directed
SNEH CORPORATION
M/s Ajay kumar Garge
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .