Work to place underground the overhead power lines that are obstructing the road widening project from Jagram Crossing, via Shamya Mai Park, to Katra Link Road.

S/F of Double Pole Structure of 410 SP/55 11 M. long Pole STP in 1:3:6 CC foundation wioth 3 with 3 No. M long 100 mm x 50 mm x 5 mm and 2 No. 2 M. long 75 mm x 40 mm x 5 mm MS Channel, 2 No. 2.5 M. long 50 mm x 50 mm x 5 mm Angle Iron Braching and 14 No. 38 mm x 6mm D Clamp with necessary Packing Pieces complete with 250 KVA 11/0.433 KV, Level-2 BIS Standard, as per present UPPCL's Specifications & approved make including Pole mounted Transformer 11 KV TPMO & Fuse Set, earthing etc, Rate excluding deducting Plinth & LT MCB Box.

S/F of factory fabricated and wired metal Glande dust & vermin proof floor mounting distribution TPN feeder pillar with incoming 400 Am. 1 Nos MCCB and outgoing 200 Amp 2 Nos. = 63 Amp 1 Nos cubical type with requiredd busbar as IS 8623 with Insulated Heat Shrink sleeving and mouting on non Hygrscotic suport as CMC/BMC. With 3 No indicator, The Pillar should be fabricatedwith CRCA sheet 2 mm thick Paintedwith High quality Pint with locking arrangement complete with cable Gland complete.

S/F of TPN/ Telex Feeder Pillar Cubical Box made of 45mm x 45mm x 5mm Angle Iron frame and 14 SWG MS Sbheet with Both side Lockignarrangement. Dust and Vermin Proof consisting with Copper Bus Bar on Henry type Fuse unit on 2 No. 500 Amp and 3 No. 300 Amp. Tailless unit Completethe Box shall be Painted with approvedaluminium Paint over Red Oxide Primer in 1:3:6 CC foundation as directed by E/I.

S/F of 200 Amp Busbar Box made of 16 SWG CRCA Sheet including TPN Aluminium Busbar complete with locking arrangement with required Clamps nuts & bolts and grouting / .Fixed on Wall (if required on Angle stand angle will be measured in MS Items)

S/L of Aluminiuum conductor PVC Insulated armoured served sheathed 400Sq mm x 3.5 Core LT cable 1100 volts grade at a deopth of 750mm below groundlevel over a cushion of 756 mm. Thick sand all around and protectedwith burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable sie or as directed by the E/I, complete

Same as Above but size 240 Sq mm x 3.5 Core

Same as Above but size 120 Sq mm x 3.5 Core

Same as Above but size 50 Sq mm x 3.5 Core

Same as Above but size 16 Sq mm x 4 Core

Same as Above but size 10 Sq mm x 2 Core