PROVN OF GI PIPELINE FROM LOWER BIRPUR 405 FD HOSP NATURAL WATER SOURCE TO UPPER BIRPUR 19 BIHAR WATER POINT, PROVN OF SOLAR WATER HEATER 1000 LTR AT BLDG NO P-82 OR LIVING OF DEF AND EMP COY AT 5 MTN DIV ALONGWITH CERTAIN MINOR AND REVENUE WKS OF AG

Amount

Excavation in trenches not exc 1.5 m wide not exc 1.5 m in depth in hard/dense soil and getting out complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide not exc 1.5 m in depth in soft/ disintegrated rocks and getting out complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point.

Returning , filling in trenches including spreading leveling, watering and well ramming in layers not exceeding 25 cm with excavated soil and including making mound with balance soil all as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks 10 cm thick and setting in CM 1:4 etc complete all as specified and directed.

S&F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue , pinned at joints complete all as specified and directed.

S&F 30 mm thick 2nd class hardwood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

S&F 100mm long MS butt hinge, medium weight, cold rolled complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all as specified and directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodized, handle fabricated type complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed.

Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters divided in to squares, with plain chamfered or rounded, mitred and rebated sash bars any numbers ,prepared to receive glass, gauge etc. with , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified SSR Part-I, section 8, clause 8.20(b) complete all as specified and directed.

Supply and fix 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 Sq.m in each pane including oil putty and bedding complete fitting complete all as specified and directed.

M&L for second class clean sawn hard-wood in scantlings in framed work complete all as specified and directed.

S&F mild steel flat iron as in holdfast complete all as specified and directed.

S&F GI tubing medium grade, ISI Marked conforming to IS 1239 Part-I 2004, 50 mm bore with and including all fittings such as bends, elbows, tees, short length, socket, union, check nuts, nipples etc. fixed and laid in trenches/floor/under culvert/road crossing etc, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed. (Note: Excavation and earhwork shall be measured and paid for separately.)

Supply and fixing cast iron Sluice valve PN 1:6 as per IS-14846, body, dome, wedge-CI IS:210, rings bronze IS:318, Spindle-SS IS-6603, Gland Packing gresy jute packing, fasteners-CS, Gasket-Natural rubber, Nominal size DN-50mm, both ends flanged in existing line without damaging to existing pipe line, fixed as in repair including dismentling taking down old unserviceable one complete all as specified and directed by Engineer-in-charge. Note :- Suitable size flanges for existing pipe line, joints and jointing material shall be included under this item.

S&F cast iton air release valve, nominal size DN-50mm, strandard type heavy duty suitable for PN-1.6 pressure water pipe line including suitable size joints and jointing material, fixed as in repair including dismantling taking down old unserviceable one complete all as specified and directed.

M&L for PCC (1:3:6) type C1 (using 20 mm graded crushed stone aggregate) as in concrete pedestal for supporting the CI/GI pipes including necessary form work including demolition of existing pedestal complete all as specified and directed.

Construction of brick masonary pit of size 120 x 120 x 120cm internal size with MS sheet 3mm thick and angle iron frame of size 40x40x6mm duly painted with 2 coats of synthetic enamel paint over a coat of red oxide primer including locking arrangement, lifting handle and including excavation / earth work, PCC in foundation, brick work, plaster including demolition of existing pit complete all as specified and directed.

M & L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm graded aggregates) as in subbase finished rough complete all as specified and directed.

M&L for laying clean and dry sand under floors or in foundation including watering and consolidation complete all as specified and directed. Note : Only punned down thickness shall be measured and paid.

M&L for machine pressed precast conctete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-35 Grade complete all as specified and directed.

Material and labour for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate ) as in roof padding, coping, benching, roof kerbs or mud stops, rounded or chamfered on edges and similar etc finished even and fair complete including necessary form work all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on concrete surfaces finished even and smooth w/o using extra cement.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth w/o using extra cement.

M&L for rendering 15mm thick in CM 1:6 on concrete surfaces mixed with water proofing compound @ 3 % by weight of cement used and finished even and smooth w/o using extra cement. Note : WPC shall be measured and paid separately.

Supply only integral water proofing compound ISI marked.

Preparing newly plastered surfaces of walls and applying three coats of white wash.

Preparing newly plastered surfaces of walls and applying two coats of exterior emulsion paint (superior quality) over a coat of alkali reaistant primer complete all as specifed and directed.

M&L for rendering 10mm thick in CM 1:4 on concrete surfaces finished rough for fixing tiles.

Material and labour for glazed ceramic coloured tiles of size (300x200mm) x 6 or 7mm thick on vertical surfaces such as in skirting, dados set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 on concrete surfaces finished rough for laying tiles.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 on concrete surfaces finished rough for laying tiles.

M&L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Material and labour for preparation of new wooden wood based material over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.

Supply and fix vitreous china squatting pan ' Orissa pattern ' size 680 x 470 mm white with 'P' or 'S' trap , front or back inlet with integral foot rests excluding flushing cistern and flush pipe and making good to floor complete all as specified and directed.

S&F 10 litres PVC, valveless, syphonic action type, flushing cistern low level, white with inlet ball walve float chain and pull and bracket complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length laid in trenches complete all as specified and directed. Note : Earthwork shall be measured and paid separately.

Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 110 mm on after they are laid and tested complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished even and smooth using with extra cement.

Material and labour for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.

S&F vitreous china wash hand basin white flat back of size 550mmx400 mm including pipe chain and plug, CI brackets complete all as specified and directed.

S&F waste coupling PTMT 40mm (half or full threaded) min weight 60 gms complete all as specified and directed.

S&F Rotational mounded polythene water storage tank of 500 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I complete all as specified and directed.

S&F Rotational mounded polythene water storage tank of 1000 ltrs capacity, (multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I complete all as specified and directed.

S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed complete all as specified and directed.

S&F 125mm brass chromium plated shower rose with or without swivel joints any size including fixing of steel pipe or union and as directed.

S&F 40mm bore LDPE pipes of pressure rating 6 kgf/sq.cm, 450 mm long complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc including removing rubbish off the premises etc complete all as specified and directed.

S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed.

Material and labour for chequered cement concrete tiles (20cmx20cmx25mm) thick, set jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed.

Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, side and soffits (if any) of foundation and plinth beams and similar work.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, butresses columns, pillars and boundary pillars and posts (including caps and bases) complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:4 on concrete surfaces with neeru finish using extra cement.

M&L for CP brass tubular tower rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-2 using 40mm graded aggregates laid on floors, finishing cement concrete surface even and smooth complete all as specified and directed.

S&F electric water heater (Geyser), storage type 25 Ltr capacity (5 star BEE rating) including PVC connections 15mm dia for hot and cold water and 3 core copper cable with plug to 15 Amp AC 230 V fixing on existing wall complete all as apecified and directed. Note : Geysers will be fitted with fasteners - 04 Nos including bolts washers etc and making good disturbed surfaces. Make HAVELLS Monza DIGI or equivalent model of make BAJAJ/ CG/ RECOLD MORPHY RICHARDS/ VENUS

M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade for one socket outlet 15 Amp on independent board with 4.0 sqmm stranded copper conductor including 4.0 sq mm wire as earth contunity conductor connected to common earth dolly.

S&F switch socket combination 6 Pin, 15 Amp, 230 Volts complete all as specified and directed.

S&F MCB SPN 32 amp, 240 V, 10 kA, 'C' curve complete all as specified and directed.

Supply and fix sheet metal enclosures for DBs (Single door type) when MCBs to be used 240 volts, 2 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S&F 15mm bore steel water tubes, medium grade, galvanised with all fittings fixed to walls or laid on floors complete all as specified and directed.

S&F 20mm bore steel water tubes, medium grade, galvanised with all fittings fixed to walls or laid on floors complete all as specified and directed.

S&F angle valves, CP, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 15mm complete all as specified and directed.

S&F stop valves, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 20mm complete all as specified and directed.

S&F stop valves, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 15mm complete all as specified and directed.

S&F concealed stop valves, CP, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 15mm complete all as specified and directed.

S&F pillar tap, CP, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 15mm complete all as specified and directed.

S&F bib tap, CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes of size 15mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection.

Supply and laying sub main wiring two single core 6.00 sq mm stranded copper conductor of red & Black colour including 6.00 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing and caping of suitable size for accomadating the wires including taking down existing submain wiring complete all as specified and directed. Note : Two runs of 6 sq mm copper conductor wire, One run of 6 sq mm earth continuity conductor and one run of PVC casing and capping shall be measured as a unit.

S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire on twin core cable flat or circular 6 sqmm multistrandard all as complete specified and directed by Engr in Charge.

M&L for point wiring with PVC insulated unsheathed stranded copper conductor, FRLS grade of size 1.5sqmm in and including PVC casing capping of required size surface type with all accessories including PVC for housing /mounting brackets, switches, sockets etc including 1.5sqmm PVC insulated unsheathed stranded copper conductor 1100 volts grade green in colour as earth continuity for one light/ fan point controlled by one switch all as specified and directed.

S&F switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed.

Supply and fix lamp holder, insulated body, with back plate for angular batten fittings with one PVC block of size 75mmX75mm for mounting the fitting complete all as specified and directed.

S&F wall mounted mirror light LED fittings, 14/11/10 watt, 2 feet long including integrated electronic driver complete all as specified and directed.

S&F environmental friendly, ultra modern, energy saving, surface mounted decorative hexagon LED bulk head 10 W including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed. Make : HAVELLS Cat Part No. HEXAFT10WLED857SSYMBOPC or equivalent model of make PHILIPS/ BAJAJ/ CG / EVEREADY

S&F LED lamp 15 watt, CDL, B-22 cap, (Pin type), 230 V, PF not less than 0.85 (min) , Make Havells Cat No. LHLDDEEEML8R015 or equivalent model of Make Bajaj Phillips/ Crompton/ Eveready.

Supply and fix sheet metal enclosures for DBs (Single door type) when MCBs to be used 240 volts, 2 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S&F MCB SPN 35 to 60 amp, 240 V, 10 kA, 'C' curve complete all as specified and directed.

S&F MCB SP 6 to 32 amp, 240 V, 10 kA, 'C' curve complete all as specified and directed.

S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4mm suspension wire on twin core cable flat or circular 6 sqmm multistrandard all as complete specified and directed by Engr in Charge.

S&F exhaust fans , plastic body with louvers, single phase suitable for 230 Volts, 50 Hz of 250 mm sweep and connecting up complete including provision of 3 core flexible cord cable of suitable size from ceiling rose to connector of fan including making hole in wall and making good the disturbed surface with matching colour complete all as specified and directed.

Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised earth lead of 4mm dia GI wire by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge and earth testing on completion complete all as specified and directed.

M/S SM ANSARI

M/S SUNRISE CONSTRUCTION AND CO

mon traders

M/S MURPHEW ENTERPRISES

Sikha Traders

M/S RARAI ENTERPRISES

M/S ASHOK CONSTRUCTION