8130/E8 REPAIR AND REPLACEMENT OF FLOORING, JOINERY, ROOF TREATMENT, FALSE CEILING, PLUMBING IN CERTAIN BLDGS OF OTM AND MD ACCN AT ARMY CAMP PALLAVARAM UNDER GE STM

Amount

Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit.

All as per item No 1 here in before but n exc 1.5 Sqm each

Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each.

Taking down shutters of any description area n.exc 1.00 Sqm each

Taking down shutters of any description area exc 2 Sqm each and refixing in same opening after necessary repairs

Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs

Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs

M&L for cutting holes in brick wall built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick but not exc one brick ( Depth of embedded portion of holdfasts or lugs measured from face of jamb in to the wall) all as specified

M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile mentions on plus side shall be acceptable but no extra payment on this account shall be made.

M&L for Providing and fixing factory made single extruded WPC (Wood Polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as specified and directed. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately

M&L for second class hard wood 35 mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides

M&L for second class hard wood 35 mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.

M&L for second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows

M&L for FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165

Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described & treated with tar or coal tar black paint treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each

Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & girth, not otherwise described & treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of Chowkats, etc., area n exc 0.1 sq.m each

M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face supplying & fixing in opening including making good to the jambs as per specification all as directed. Note: The quote rate shall be inclusive of following:- (i) Existing/new wall edges shall be finished properly in cement plaster in CM 1:4 including supply and fixing of 6 Nos wooden plugs for catch door frame size not exc 17 sqcm average sectional area and 100mm long. (ii) Frame shall be fixed to the wooden plugs inserted in wall using 6 Nos of 100mm long MS Screw, 3 each on either side

M&L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F SS Butt hinges,100mm medium weight

S&F SS Butt hinges, 75mm medium weight

S&F extruded aluminium alloy handles,150mm fabricated type anodized

S&F extruded aluminium alloy handles,100mm fabricated type anodized

S&F Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed

S&F Aluminium, 100mm anodized, barrel tower bolts extruded section & fixed

S&F Aluminium alloy, anodized, 250mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed

S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.

S&F 150mm Floor door stopper of aluminium alloy body & single legged with hard drawn steel spring, fixed in door shutters.

M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats of synthetic enamel paint over one coat of prink primer

Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads.

S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane

S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets.

S&F in repairs 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work.

M&L for 6mm thick teak wood lipping for external of 18/19 thickness of board

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised

S&F 100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 20mmm complete including taking down all as specified as specified

Supplying and laying of CPVC pipes SDR 11& plain CPVC SDR 11 fittings on walls/ceiling or laying in floors of outer dia 25mm complete including taking down all as specified as specified

Supplying and laying of brass elbow of 20mm for CPVC pipe outer diameter of 16mm

Supplying and laying of brass Tee of 20mm for CPVC pipe outer diameter of 16mm

Supplying and laying of brass Tee of 25mm for CPVC pipe outer diameter of 16mm

M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 15mm bore all as specified and directed

M&L for taking up or down steel tubing and connections, including cleaning for refixing of GI water tubing of 20mm bore all as specified and directed

S&F PVC connections 15 mm dia with PTMT nuts of length 450mm all as directed

S&F grating doom of size 100mm dia of PTMT (minimum weight 25 gms)

S&F in repairs for 32mm dia PVC waste pipe 750mm long suitable for wash hand basin

S&F in repairs for40mm dia PVC waste pipe 750mm long suitable for Sink .

S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor .

S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed

S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed including PVC waste pipes.

S&F in repairs 10 litres capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon

S&F in repairs 15mm fancy type chromium plated brass angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed

S&F in repairs bib cock long body with flange, fancy type brass chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified

S&F in repairs pillar cock, fancy type chromium plated brass , screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore

S&F in repairs CP brass wall mixer 15 mm bore for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe

S&F in repairs Bath room PVC cabinet mirror of size 350mm x 450mm

S&F in repairs towel rail 600 mm long of CP brass fixed with and including chromium plated brass screws and plastic cleats.(Minimum weight 190 gms)

S&F in repairs brass chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union

S&F in repairs sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm

Supply and fix in repairs Bib cock two way double Handle with flange, fancy type brass chromium plated, screwed down, screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified

S&F in repairs kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc. complete.

S&F in repairs PVC (SWR) pipes single socketed 75mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified.

S&F in repairs PVC (SWR) bends 75mm bore

S&F PVC (SWR) bends with access door 75mm bore

S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door

S&F PVC SWR vent cowl 75mm bore

S&F in repairs PVC (SWR) pipes single socketed 110mm bore, in any length with rubber ring joints laid in trenches/floors or walls all as specified.

S&F PVC (SWR) bends 110mm bore

S&F PVC (SWR) bends with access door 110mm bore

S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door.

S&F PVC SWR vent cowl 110mm bore

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L for non skid coloured ceramic tiles each tile area (sqr/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

M&L for coloured vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

Material and labour for ceramic coloured tiles, Non skid, area of each tile exc 0.18sqm and not exc 0.38sqm (square / rectangle) 7 to 8mm thick mm thick, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:6 for floor finishing complete all as specified and as directed.

All as per item No. 83 above but Vitrified coloured ceramic tile in vertical surfaces dado/skirting using CM 1:3, 10mm thick backing coat.

All as per item No. 83 above but non skid coloured ceramic tile in vertical surfaces dado/skirting using CM 1:3, 10mm thick backing coat.

M&L for glazed coloured ceramic tiles in vertical surfaces 300 x 450 mm 7 to 8 mm thick set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM in 1:3 dado/skirting

Dismantling of existing roof treatment of any description completely and brushing the cleaned surfaces of concrete with neat cement slurry @ 3Kgs of cement per sq.m.complete all as specified and as directed. remove all the debris from site and rubbish off the premises complete

M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate over the roof slab 25mm thick, finished even and fair without using extra cement all as specified and directed.

M&L for 10mm thick cement plaster in CM 1:3, mixed with water proofing compound over the levelling course while the concrete is green, finished even and smooth without using extra cement all as directed.” Note: WPC shall be measured and paid separately.

Supply only liquid water proofing chemical

M&L for APP Modified prefabricated five layer water proofing membrane, not less than 3 mm thick and weighing not less than 3.80 kg/sqm reinforced with non woven polyester matt black finished over compatible primer @ 0.3 Ltrs per sqm, and a bonding bitumen of VG-10 at 1.20 kg/sqm torching the membrane on whole surface uniformly while unrolling the membrane by LPG and sealed with trowel after necessary preparation of surface complete all as per manufactures instructions and finally finished with a coat of bit mastic aluminium paint @ 0.10 litre/sqm over a coat of blown bitumen 85/25 grade @ 1.20Kg/Sqm over the membrane. The Overlap joint shall be provided of 75mm in longitudinal direction and 100mm in transverse direction respectively. All the angles, abutments and the drainage outlets shall be sealed with extra care to ensure full bondage including preparatory work. Note: The work shall be carried out by authorized applicators of manufacturers

M&L for Powder coated aluminium frame for doors, sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc. complete all as specified and directed.

M&L for Powder coated Aluminium doors, window and ventilators shutters, without sash bar, aluminium section weighting 0.55kg / m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws etc complete all as specified and directed.

S&F in repairs 15mm fancy type chromium plated with long shank and cup concealed type angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty

S&F in repairs Door closer hydraulically regulated (Aluminium extruded section body), designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed

S&F in repairs rotational moulded polyethylene triple layered water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 25mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms, complete all as specified including dismantling old tank.

S&F in repairs rotational moulded polyethylene triple layered water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 25mm Nipple suitable for HDPE water tank. (minimum weight 20mm-45gms complete all as specified including dismantling old tank.

S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms).

S&F in repairs 25 mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed

S&F in repair Vitreous China Urinal, Half stall type size (345x320x560) coloured/white complete fixing with suitable fixing arrangements to wall with and including domed waste coupling and waste pipe complete, all as directed.

Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation board including cover fillets

S&F Anodised aluminium snap grid frame ( size of grid 605 x 605 mm)work for false ceiling all as specified. and in SSR part I

S&F 4mm thick non asbestos fibre cement building boards fixed or laid to Aluminium frame work with screws

M&L for preparation of new surface of ceiling of any description and applying two coats of distemper oil emulsion, white or tinted

S&F in repairs 6 feet pulley operated cloth drying system, aluminium anodised 22 mm dia pipes, channel assembly, locking system to hide rope knot, ropes 4 mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:- Easy dry or other equivalent make, the sample shall be approved by GE prior to incorporation.

M/SJAYAM CONSTRUCTIONS (BID ID -3069763)

NAVEEN ENTERPRIESES (BID ID -3070351)

GOKUL ENTERPRISES (BID ID -3070764)

MONISH CONSTRUCTIONS (BID ID -3070753)

G.JANAKIRAMAN CO (BID ID -3070385)

G.L.THIRUMALAI NAIDU AND COMPANY (BID ID -3070904)

A V ENGINEERING (BID ID -3069428)