Wdg. and Stg. of road with 100 mm DLC and 200 mm PQC from Haldana Barrier to Bhodwal Majri (Road ID 8939) along Nirankari Samagam, Samalkha in Panipat District.(Shifting of HT LT line).

Amount

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]

[24.14.48]LT CABLES (Aluminium Conductor, Armoured and Unarmoured) PROVIDING& ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE ONSURFACE/ EXISTING CABLE TRAY COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK 48. 50 Sq mm 4 core (Arm.) [Through Rate]

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.7]RCC FOUNDATIONS FOR DG SET "Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1.8x1.0m)" Unit: per cum [Through Rate]

Supply/Erection of Phase plate for each phase set complete in all respect the entre satisfaction of engineer in charge, Specification and rates approved by the DHBVN /UHBVN authority.

Dismantling of 9/11 Mtr. PCC Pole

Supply of prestressed cement concrete pole as per IS: 1678-1990, 11 mtr long 152mm*203mmat top and 152mm x368mm at bottam with working load of in ground 360kg burried 2.20metre in ground (Make and specifications as per Uhbvn/Dhbvn,) including Erection of Rcc/Pcc pole of following length in brick blast and ramming the foundation finishing with 150 mm thick cement concrete (1:3:6)layer on top with including excavation and refilling etcas required

Supply and erection of MS Angle 50x50x 6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

S/E of MS flat 50x 6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge.(Make and specification as per UHBVNL/DHBVNL)

Supply and erection of MS channel 75x40 mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL)

S/E of 8ft. long Stay Sets complete with MS X-Plat 460mm of Angle 65×65×6 Elbow and rod Wt. 13.80 Kg. Consisting of the following GI Rod, 20mm dia, 8 ft long, Wt. 6224 KG MS X-Plate 460 mm of Angle 65×65×6mm Wt. 5.336 KG GI Elbow and Nut Wt. 2.240KG up-to the entire satisfaction of Engineer in-charge of the work (as per UHBVN Specifications)

Providing and fixing of stay wire 7/8 SWG complete in all respect in the entire satisfaction of Engineer-in-Charge.

S/E of Earthing with Earthing rod wt. 6.175 kg up-to the entire satisfaction of Engineer in-charge of the work (as per UHBVN Specifications)

S/E of BARBED WIRE including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge.

S/E of 11 KV Disc Insulator 45 KN (TandC Type) with all labour and material to complete the job including fixing the same on existing Angle/channel upto the entire satisfaction of Engineer-in charge (Make and specifications as per UHBVNL / DHBVNL

S/E of 11 KV Polymeric Disc fititng 45 KN (TandC Type) with all labour and material to complete the job including fixing the same on existing Angle/channel upto the entire satisfaction of Engineer-in charge(Make and specification as per UHBVNL/DHBVNL

Providing and fixing of Nut and Bolt of size as per ISI specification of Engineer-in-charge. (Make and specification as per UHBVNL/DHBVNL).

S/E of ACSR conductor 80sqmm (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work.

Providing and fixing of Suspension hook with bracket and specification as per requirement of Engineer in charge.

Providing and fixing of LT Fuse board Unit and specification as per requirement of Engineer in charge.

Providing and fixing of Polymeric pin insulator with pin complete and specification as per requirement of Engineer in charge.

S/E of T/F platform set as per satisfaction of Engineer-in-charge

Providing and fixing of LT Insulators complete in all respect and specification as per requirement of Engineer-in-charge

Providing and fixing of Lightening Arrestor along with allied material upto to the entire satisfaction of engineer-in-charge of the work.

Providing and fixing of GSL 8 SWG complete in all respect and specification as per requirement of engineer-in-charge .

Dismantling of H. Pole structure without stay

Dismantling of LT/HT Tee off

Dismantling of LT AB cable

Dismantling of ACSR conductor

Dismantling of 100/200 kva transformer

Pdg. and fixing of V Shape X arm 100x500 mm (wt.13.20 kg) with accessories complete in all respect upto entire satisfaction of engineer in charge (Make and specification as per UHBVN/DHBVN)

Pdg. and fixing MS D strip with accessories complete in all respect upto entire satisfaction of engineer in charge (Make as per UHBVN/DHBVN)

S/E of LT AB Cable 50 plus 35 mmsq (ISI Marked) complete in all respect upto entire satisfaction of engineer in charge (Make and specification as per UHBVN/DHBVN)

Pdg. and fixing Paint on PCC pole for feeder and satisfaction as per requirement of engineer in charge

Dismantling of GO switch

Supply and Erection of 11 KV Top hammer make Rastriya / Jayshree/BHEL with all labour and material to complete the job including fixing the same on existing Angle/channel upto the entire satisfaction of Engineer-in charge (Make and specifications as per UHBVNL / DHBVNL

Pdg. and erection/laying of XLPE (E) 11 KV HT Aluminum Conductor Armoured Cable ISI Mark TR Compound laind in Pipe/ Trenches/Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works- 95 sqmm 3 core

S/E of 11KV gang operated switch Jayshreemake conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H`pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works.(Make and specification as per UHBVNL)

S/E of full clamp for fixing of MS Channel/flat on PCC pole with labour and Petty material complete the job in all respect upto entire satisfaction of Engineer in charge

S/E of Half clamp for fixing of MS Channel/flat on PCC pole with labour and Petty material complete the job in all respect upto entire satisfaction of Engineer in charge

Supply and erection of GSS wire 7/14 SWG (ISI Marked) with accessories including stringing of cable of complete in all respect upto the entire satisfaction of Engineer in charge (Make and specifications as per UHBVNL)

Chopra Electric Company (BID ID -1329625)