Supply and Delivery of Cesspool Tanker (Suction cum Jetting Machine) 6000L BS VI with chassis in Vadakarai KeelpidagaiTown Panchayat

Amount

Supply and delivery of Cesspool Tanker with following Specifications Features -Vacuum Pump - Type - Rotary Sliding Vane -Lubrication- Forged oil Lubrication- Cooling - Aircooled

Suction Hose- Dia\Length \Qty- 4" / 3 mtr. / 10 Nos with suitable Clamp & Washer and holder in both side of tanker.

Sludge Suction & Drain Value- Size 4"- Type - Knife gate Ball Valve Heavy duty (For Suction and Delivery Separately.)

Hyd.Pump- Type - Not Applicable Drive - Not Applicable

Tank - Volume - Water Storage Tank -1000 Litre Sludge Storage Tank -5000 Litre Built by 6 mm thick MS plate manually open type Rear door and another side fixed dish end type. In Sludge Tank side inner slide plate must provided at an angle of 7 degree, and also provide Reinforecement to avoid buckleness in Vaccum and Pressure operation.

Vacuum Pump- Make - Imported Brand only - Jurop / Mono / Gardrner Denver Mistrel / Battioni only. Flow / Vacuum - 500-550 Cum ./Hr./90% - Mode of operation- Suction and Pressure Make- Prattisoli or equivalent imported make only.

Jetting Pump - Working Pressure - 150-160 bar Hose Length - 120 m - Imported brand only - Size -3/4" dia.- Water Flow for Pump of Jetting Machine- 80-100 Lpm - Minimum Brust pressure of Jetting Hose - 250-300 Bar - Maximum Working Pressure of Jetting Hose- 100-120 Bar

Safety-Water Level Indicator - Type/Qty- Tube type / 2 Nos - 2" Dia.

Pressure relief Valve - Size/Qty- 2"/1 No

Vacuum relief Valve - Size/Qty-1.5"/1 Nos

Gauges- Size/Qty- 6" dial Vaccum gauge & Pressure gauge separately.

Mounting - Chassis a) GVW - 12 TON b) Emission Norms - As per Local RTO c) Chassis Engine output - Min.90 HP d) Driver’s Cabin Type - Single (Day) Cabin e) Make - Ashok Layland/ Tata/ Eicher/ Equivalent with PTO with emission norms BSVI f) Make/Model/wb/hp/Side PTO Provision - Any other equivalent model of other chassis manufacturers g) Scope - Customer h) Side PTO Provision - Provision required

Dimensions - Equipment a) Equipment Length - 4500-5150 mm Approx b) Equipment height - 1500-2200 mm Approx c) Overall width - 2000-2250 mm Approx d) Overall Length - 3000-3500 mm Approx e) Equipment rear overhang - 600-1600 mm Approx

Painting - Surface Preparation and finish a) Eqiuipments Exterior - Spray-painted with two coats of superior qulity of enamel metal paint Colour code will be as per customer requirements b) Tank's interior- coated with 2 coats of superior quality anti-corrosive gray epoxy paint

For the first one year the maintenance cost per Cesspool Tanker and also Commisioning of vehicle and Training of Concern TP's Operato for a period minimum one week shall be the responsibility of the supplier

Chenduran Enterprises Private Limited