Renovation of over head street light with providing of PCC poles, Aerial Bunched cable, junction box etc. for provision of 415V overhead street lighting arrangement through AB cable at CPP Plant under Kathara Area

Providing of PCC/RCC pole for over head power traction and tele communication line 200 kg (length 8 mtr.)

providing of AB cables for Asnapani colony (3X35+1X25 SQ.MM) cable (24 Span x 30 m)=720M,Total= 720 MTR

Erection of RCC/ PCC pole of following length in brick ballast and ramming thefoundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 6.5 metre and upto 8.0 metre

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe(medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia x 1.8 mtrs. long stay rod, anchor plate of size 45 cm x 45 cm x 7.5 mm, thimble, stay clamps, turn buckle (20mm x 60cm), 7/3.5mm dia G.I stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement: 3course sand: 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.

Erection of Aerial bunches cable of size ( 3X35+1X25 ) SQ.MM

Supply of all accessories for erecting the AB cable in pole. (Clamp, I Hook, Suspention, connector etc as required) for street light

Providing of PVC insulated connector as required for each light(1 x 2 x25 )=50 nos

Erection of all accessories for erecting the AB cable in pole. (Clamp, I Hook, Suspention, connector etc as required).

Supplying and erection of 2C x 2.5 sq. mm Copper cable PVC Insulated for light connection etc. (25 nos x2 mtr)=50 mtr

Providing of PVC Junction Box with connector clamp (300mmx300mmx182mm)etc as required for each qtr

100 A Details of cost for one each Supplying, installing, testing and commissioning of following capacity TPN tap off box / plug-in box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing overhead bus bar system complete with TPN disconnector FSU and HRC fuses, connections, earthing etc. as required

Earthing with G.I earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. Details of cost for one Set

Supplying and laying 25 mm X 6mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Providing and installationof timer switch rating of 150 Amp ,415 volts etc. as required for each

Total impact of GST for the purpose of CTC

Please Enable Macros to View BoQ information