REPAIR TO WALL ,FENCING GATE,DRAIN and OTHER MISC BR WORKS AT PATTAN (BANDIPORA) AND REPAIR MAINT OF INTERNAL WIRING INCLUDING FIXTURES , FITTINGS AT GULMARG UNDER GE 969 EWS.

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Stone walling of random rubble with best quality locally available harder stone such as granite, trap or basalt, uncoursed, well bonded, bedded, solidly hearted and built in cement mortar 1:6, complete all as specified & directed.

All as per Srl item No. 02 above but except stone.

Extra over stone walling of granite, trap or basalt stone for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses with maximum depression on face from straight edge held against the dressed surface n exc 40mm, complete all as specified & directed.

Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concreteand screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming toFe-290 Gde E-165

Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified. (each line wire to be measured)

TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified& directed.

All as per Srl item No. 7 above but 6mm dia & over upto & including 8mm dia in stirrups, spacers and binders.

Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortar 1:4, complete all as specified.

PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

S&F in repair Punched Tape concertina coil (including spike and handle) with 50 turns and dia 1050mm. having a core wire of high carbon spring steel of high tensile strength. The punched tape and core wire (2.6 + 0.035mm dia) are electro galvanised to provided protection against out door exposure. The punched tape is mechanically crimped over the core wire and then formed into a coil at various parts of the periphery of the coil steel clips "total 129 nose per coil spaced" to connect the individual turns of the coil to each other so that it opens up like an accordion. The width of strip as 19mm and spacing of blades 24.00 + 0.5 mm C/C. the weight of each coil will be 15.2 + 5% kgs without packing material and coil length 15 mtr when opened up with an effective height 915mm. Each coil wound with bituminized hessain cloth for providing protective packing. Complete all as specified and directed by Engineer-In-Charge

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface complete all as specified and directed by Engineer-in-charge.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :-

(a) Description all as item no.16 above but for One light point controlled by one switch.

(b) Description all as item no.16 above but for One switch socket combination 5 Amps on independent board.

(c) Description all as item no.16 above but for One switch socket outlet 5 Amps on same board with other switches.

M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor complete all as specified and directed by Engineer-in-charge.

S & F fixed in repair Switch piano flush type single pole, one way 5/6 Amp complete all as specified and directed by Engineer-in-charge.

S&F in repair Switch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete complete all as specified and directed by Engineer-in-charge.

S & F in repair switch socket outlet two in 1 3 Pin, 5 Amp, 230 Volts complete all as specified complete all as specified and directed by Engineer-in-charge.

S&F in repair Switch socket combination flush type multipurpose 3/5 pin suitable for 15 Amp complete all as specified and directed by Engineer-in-charge.

S&F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block complete all as specified and directed by Engineer-in-charge.

S&F in repair Linnet LED mirror light 2 feet, reflection without shadow 7 wat, Complete all as specified and directed by Engineer-In-Charge. Make: CG/Bajaj/ Havells or Equivalent, Cat Ref Crompton LCL-07-CDL

Supply & Fixing in repair Modular switch single pole one way 6 Amps 1 module 240 V, Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair Switch flush button single pole one way 15 Amps, single pole, one way, 240 V, Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair Modular switch single pole one way 16 Amps 1 module 240 V, Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair Lamp holder, insulated body, threaded dome pattern, suitable for bracket fittings, Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair 6 Amps 2 in 1 switch socket combination 3/5 pin type along with box Complete all as specified and directed by Engineer-In-Charge. (Anchor- Cat No.38841) Make : Anchor or Equivalent

Supply & Fixing in repair 16 Amps switch socket combination 3/5 pin type along with box, Complete all as specified and directed by Engineer-In-Charge. (Anchor- Cat No.39593) Make : Anchor or Equivalent

Supply & Fixing in repair Bell switch, flush type single pole, one way 5 Amps, Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair Bell buzzer AC ,single phase 220/240 volts, Complete all as specified and directed by Engineer-In-Charge. (Make-Anchor/Usha/Bajaj)

Supply & Fixing in repair MCB single pole 10 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard/ Havells, C&S)

Supply & Fixing in repair MCB single pole 16 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard /Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB single pole 20 Amp, B curve Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard /Havells, C&S)

Supply & Fixing in repair MCB single pole 32 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard /Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB double pole 20 Amp, B curve, complete all as specified and directed. (Make:- L&T/Schneider/ Standard/Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB double pole 32 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard/ Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB double pole 40 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard/ Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB Double pole 63 Amp, B curve, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard /Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB four pole 32 Amp, B curve, 415 volts, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard /Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB four pole 40 Amp, B curve, 415 volts, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard/Havells/Bajaj/ C&S)

Supply & Fixing in repair MCB four pole 63 Amp, B curve, 415 volts, Complete all as specified and directed by Engineer-In-Charge. (Make:- L&T/Schneider/ Standard/ Havells /Bajaj/ C&S)

Supply & Fixing in repair LED bulb thread/pin type of capacity 5 Watt, Complete all as specified and directed by Engineer-In-Charge. (Make:- Havells/Bajaj/ CG)

Supply & Fixing in repair LED bulb thread/pin type of capacity 7 Watt, Complete all as specified and directed by Engineer-In-Charge. (Make:- Havells/Bajaj/ CG)

Supply & Fixing in repair LED bulb thread/pin type of capacity 10 Watt, Complete all as specified and directed by Engineer-In-Charge. (Make:- Havells/ Bajaj/ CG)

Supply & Fixing in repair 18 W LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver, Complete all as specified and directed by Engineer-In-Charge.Make of Havells code no.LHEXBQP7IN1W018 or equivalent in Philips/Bajaj

Supply & Fixing in repair MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair MCB DB 12 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection,single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair MCB DB 2 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engineer-In-Charge.

Supply & Fixing in repair 6 Amp 3 pin plug top with ISI Marking, Complete all as specified and directed by Engineer-In-Charge. Make Havells/ Bajaj/ CG or equivalent

Supply & Fixing in repair 16 Amp 3 pin plug top with ISI Marking, Complete all as specified and directed by Engineer-In-Charge. Make Havells/ Bajaj/ CG or equivalent

Supply & Fixing in repair Heavy duty exhaust fan fan of size 300 mm sweep 1400 RPM turbo force SP, metallic Complete all as specified and directed by Engineer-In-Charge. Make : Havells or Equivalent

PVC insulated, armoured, heavy duty duty LT electric cable with stranded aluminium conductor rating 1100 volts grade of size 10 Sqmm 2 core laid in trenches or passing through pipes/ducts or fixed to walls/poles complete all as specified. (Earth work, brick protection and sand cushioning shall be measured and paid for separately).

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling complete as specified and directed. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM make of cable, Complete all as specified and directed by Engineer-In-Charge.

Earthing complete with galvanised steel earth plate, electrode, 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I. Connected to earthing test point all as specified and including necessary earth pit PCC 1:3:6 chamber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover, watering arrangement shall be made with GI pipe medium grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 15mm dia upto 7.5 from the earth plate electrode & refillling of soil etc including necessary excavation & earth work in any strata and PCC chamber complete all as specified and directed by Engr-in-Charge including demolish existing earth pit taking out old materials.

S&F in repairs heating element (round/traingular) including rubber gasket & washer etc of capacity 1.5 KW suitable for existing make and shape Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs heating element (round/traingular) including rubber gasket & washer etc of capacity 2 KW suitable for existing make and shape Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs thermostat including rubber / PVC gasket to be set to a temperature not higher than the range of 70 degree Centigrade suitable for existing geysers of capacity 25 / 35 / 50 ltrs. Complete all as specified and directed by Engineer-In-Charge.

S&F fusible plug melting at 90 - 100 degrees Centigrade including taking down existing uncerviceable fusible plug Complete all as specified and directed by Engineer-In-Charge.

S&F high pressure valve with dead weight suitable for 25 / 50 ltrs capacity Geysers including taking down existing unserviceable high pressure valve Complete all as specified and directed by Engineer-In-Charge.

S&F PVC connecting pipe 18" long with brass adopters for cold water and connecting up with complete for 25 /35 / 50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe Complete all as specified and directed by Engineer-In-Charge.

S&F PVC connecting pipe 18" long with brass adopters for hot water and connecting up with complete for 25 /35 / 50 ltrs capacity Geysers including taking down existing unserviceable PVC connecting pipe Complete all as specified and directed by Engineer-In-Charge.

S&F bottom covers (set of two halves) duly painted made out of Aluminium / MS sheet of 18 SWG suitable for 25 / 35 / 50 ltrs capacity Geysers including taking down existing unserviciable bottom covers Complete all as specified and directed by Engineer-In-Charge.

S&F base assembly complete with inlet, out let, thermostat pipes, drain plug and screws for fixing the element suitable for any make and capacity Geysers complete with nuts, bolts and rubber gasket including taking down existing unserviceable base assembly Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs brass non return valve (check valve) 15mm bore with necessary GI specials including taking down existing unserviceable non return valve Complete all as specified and directed by Engineer-In-Charge. Make: KIRTI / ZOLOTO/ SHAKTI.

M&L for repairs to water heater inner vessel including brazing, welding, testing for a pressure of 3kg / Sq.cm., re-assembling of any capacity Geysers Complete all as specified and directed by Engineer-In-Charge.

S&F indication lamp for 25 / 35 / 50 ltrs capacity Geysers including taking down existing unserviceable indication lamp Complete all as specified and directed by Engineer-In-Charge.

M&L for servicing of geysers of any capacity by opening of entire geyser and cleaning all the sludges, blockages, dust etc. Complete all as specified and directed by Engineer-In-Charge.

M/s Riyaz Enterprises

M/S SHAMAS PARWAIZ BHAT

QAZI SONS

M/S MANZOOR AHMAD YATOO

M/S GHULAM NABI KHUROO AND CO