Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹65.1 LAccepted-AOC AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA 759103 | ANUGUL | ODISHA | 759103 | L1 | Accepted-AOC ACCEPTED BEING L1 EXCEPT ALL OTHER BIDDERS. | |
| 2 | Rejected-Technical AT MALLIBANDHA PO KALAMACHHUNIN PS COLLIERY TALCHER DIST ANGUL ODISHA 759103 | TALCHER | ANGUL | ODISHA | 759103 | - | Rejected-Technical The bidder is unresponsive. | |
| 3 | Rejected-Technical AT SUSUDA PO ANKULA DIST ANGUL ODISHA 759132 | ANUGUL | ODISHA | 759132 | - | Rejected-Technical The bidder is unresponsive. | |
| 4 | Rejected-Technical PLOT NO 4541 8062 INDRAHARI NAGAR TURANG DIST ANGUL ODISHA 759122 | DHENKANAL | ODISHA | 759122 | - | Rejected-Technical The bidder is unresponsive. | |
| 5 | Rejected-Technical AT BADASINGHADA PO N S NAGAR BHARATPUR TALCHER DIST ANGUL ODISHA PIN 759148 | ANUGUL | ODISHA | 759148 | - | Rejected-Technical The bidder is unresponsive. |
Tender Value
₹1.2 Cr
EMD Value
₹1.5 L
Closing Date
11 Mar 2025, 5:00 pmClosed
STAFF OFFICER CIVIL JAGANNATH AREA
Office of the General Manager MCL, Jagannath Area Po-Dera,Dist-Angul, Odisha-759103
Cleaning and disposal of sludge/mud from drain and deployment of JCB at railway siding 1,2 and 3,4 of BBSRI OCP, BBSRI Area for a period of two years.
2025_MCL_329797_1
MCL/GM(JA)/SO(C)/e- Tender/24-25/187, Dtd-21/02/25
Open Tender
Civil Works - Others
Item Rate
730 days
Bhubaneswari OCP
AS PER NIT
5 documents required · 5 mandatory
₹1.5 L
13 May 2025
22 Feb 2025
13 Mar 2025
24 Feb 2025
11 Mar 2025
24 Feb 2025
24 Feb 2025 - 4 Mar 2025
Amount
Cleaning of cross drain at siding 1,2&3,4 by deploying manpower daily in monsoon period as per instruction of Engineer-In-Charge.
Cleaning of drains including removal of earth/slush/mud/silt etc. from drains including disposal of the same within a lead of 50 metres.
Carriage of materials by mechanical transport including loading,unloading and stacking manure or sludge Lead-5 km.
Hiring of Hydraulic Excavator with driver and fuel for cleaning of concrete road and other miscelleneous works at different places of BBSRI OCP as per instruction of Engineer-In-Charge.(The JCB/Hydraulic Excavator shall be engaged for the work immediately as per requirement of the department)
Brick work with Fly Ash Brick (230x115x75 mm size) bricks of class designation 10 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stoneaggregate 20 mm nominal size derived from natural sources).
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, ifnishing and reinforcement- All work up to plinth level : 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .