WORKSHOP ROOFING WORKS AT CMSRU

Removing the existing old AC plain or corrugated including scaffolding,handling, sorting, stacking and transporting outside the CMSRU premises and dumping in dumping grounds complete as directed(All safety norms specailly foolowing)

Providing and fixing of pre-coated galvanized iron profile sheets of any colour (Size, shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 mm(+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns.The sheet shall be fixed using self drilling/self tappingscrews size (5.5X55mm) with EPDM seal, complete upto anypitch in horizontal/vertical orcurved surfaces. Including neccessary scaffolding etc Make(JSW/JINDAL/TATA)

Providing and fixing of 3mm polycarbonate sheet with necessary screws and fittings i.e. ¾ size self screws with ½ inch ( Aluminum + Rubber washers) Including neccessary scaffolding etc

Providing and fixing pre-coatedgalvanized steel sheet roofing accessories 0.50 mm (+ 0.05 %)total coated thickness (TCT) thick zinc coated 120 gms / sqm as per IS: 277 in 240 mpa steel grade, 5-7 microns Epoxy primer on both sides of the sheet and polyster top coat 15-18 microns using self drilling / self tapping screws complete – Ridges Plain (500-600mm). Including neccessary scaffolding etc Make(JSW/JINDAL/TATA) Note:Previous cement/Ashphalt roofing sheet removing and dumping outside CMSRU plant in all scope by contractor

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat cement primer on plastered surface

One coat zinc chromite primer

Painting with synthetic enamel paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour,scaffolding other incidentals etc. complete. One or more coat on old surface

Painting with exterior quality Acrylic emulsion paint of premium quality and colour after rubbing and cleaning the surface using wire brush,sand paper etc. including cost and conveyance of all materials labour, scaffolding other incidentals etc. complete.Two or more coats on old surface (@1.67ltr/10sqm)

P/F 24" dia wind driven turbo ventillator system in aluminium along with FRP base plate of approved make and type with all fittings,nut,bolt etc including FRP base sheet of approved colour,shape and size including cutting of sheets for fixing base to required size and length lap,scaffolding,staging etc as per instruction of EIC Make(Crompton,Bajaj)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Painting with ready mixed interior quality plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc.One or more coats

Supplying and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, with approved accesories such as 100mm SS hinges 4 nos., 100mm Anodised aluminium tower bolt 1no., 150mm aluminium aldrop 1no., Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles and necessary screws including cost of labour and all other incidentals etc. complete. ..With Frame of section 90 x 45 mm

Providing and fixing in position half glazed partition using 63.5x38.10x2mm thk.or nearest available size powder coated aluminium rectangular sections of approved quality and shade panelling with 8 mm thk.by particle board and 5mm thk plain glass fixed with necessary EPDM beading including cost and conveyance of all materials,labour etc.complete.

Supplying and pasting sun control film to the shutter of glazed doors/windows/partitions after cutting to the required size including cost and conveyance of all materials, labour other sundries etc. complete all as directed by the Engineer- in- charge. Check/ Strips frosted

Supplying and laying non-slippery/anti-skid ceramic flooring tiles of approved brand ,quality and colour set in CM 1:4 20mm thick and Jointing with grey cement slurry @ 3.3 kg/sqm for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals (size 300mm x 300mm), excluding cost of cement.(Basic rate of tile Rs.410/m2 Excl.GST )etc. complete

Supplying and laying ceramic glazed tiles of approved brand ,quality and colour for dadoing by pasting with Cement and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. quantity of cement shall be measured in relevant item. complete (Basic rate of tile Coloured Tiles Rs. 210/m2 Excl.GST)

Supplying and laying approved brand ,quality Vitrified flooring Tiles of size 800mm X 800mm by pasting with chemical adhesive Cerabond /equivalent and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, including cost and conveyance of all materials, labour other incidentals etc. complete, 800x800mm (Basic rate of tile per Sq mtr Rs.`850.0 Excl.GST)

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement. 1:4, 12mm thk.(1cement : 4Fine sand)

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Supplying and fixing glazed earthenware European type water closet of white colours with 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. tringular plate for Eureopean type W.C.(Hindware/Kingston/ Prima /Parko/ Marc),plastic seat with lid with controlled flush, low level cistern made of vitreous china of 10 litre (full flush) capacity-white etc complete.

Providing and fixing in position approved quality white glazed earthenware flat back lipped front urinal 265 x 315 x 440mm or nearest size having a 15mm PVC connection, 32mm or nearest dia PVC waste connection and 1 no CP spreader connected to waterline and 15mm brass push cock, cutting and making good the walls and floors, including cost and conveyance of all materials, screws, plugs, labour, other incidentals, etc. complete. All PVC items are to be heavy duty type.

Supplying and fixing 690 x 165 x 325mm size or nearest size porcelain urinal division plate of approved quality and colour as directed by the Engineer-in-charge.

Providing and fixing in position powder coated aluminium double leaf door with outer frames of size 63.5mm x 38.1mm x 2mm or nearest available size all round, vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock,1 no tower bolt, 4 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 2 nos of door closer of approved make.

Providing and fixing in position powder coated aluminium single leaf door with outer frames vertical styles & top horizontal member of size 50mm x 45mm x 2mm, bottom horizontal member of size 100mm x 45mm x 2mm of superior quality powder coated aluminium sections panelled with 5mm thick plain glass fixed with EPDM beading between panel and aluminium frame on all faces and glass fixed at a height of 1m from the top. Bottom half with 8mm thick particle board of height 1.2m from bottom frame including cost and labour charges for all materials and fixing etc., complete. The door is to be provided with 1no. door lock, 2 nos anodized aluminium handles 150mm or nearest size one on each face of door shutter, 1no of door closer of approved make.

GRID CEILING Providing & Installing to true line and level commercial type Suspended Modular Ceiling suspended using suitable support system at every 1200mm intervals. General Requisites; Grids width: 24 mm finished in approved shade (white). The main runners & cross Tees to have "stab" installation system made of corrosion protected galvanized steel or approved equivalent. Tile Specification Tile type: Calcium Silicate ceiling Tile Size 600 x 600 x 15 mm thk. Edge detail: Tegular Ceiling Suspension System Grid Member Sizes. Main Runners: 24 x 32 x 0.30 mm or nearest available size Cross Tees: 24 x 24 x 0.30 mm or nearest available size Perimeter Section: 24 x 27 x 0.40 mm or nearest available size. False Ceiling will be measured on horizontal Plane only. Horizontal Plane measurements are to be inclusive of vertical drops, edge mouldings, fascias etc. All extra tiles occupied by lights and diffusers to be returned to department Rate quoted to include all cut outs required for light fixtures.

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.

15/20 mm dia angle cock

SS gratings - 125/150mm size

Brass ball valves 25 mm

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge.

25mm dia

110mm pasted PVC pipe(4kgf)

50mm dia (10kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete all as directed by the Engineer-in-charge.

Tees, door tees, bends etc.

Adapters, reducers, offsets, vent cowl etc.

Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard card ground fixed to wooden cleats with CP brass screws and washers complete.

Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing 15mm nominal bore CP brass long body bib cock with wall flange of approved quality and make.

Supplying and fixing PVC line traps including cost and conveyance of all materials, labour, other incidentals etc. complete.

Providing and fixing in position louver type ventilator using powder coated Aluminium frames of approved quality and shade using 48x38x1.5mm size or nearest available sections, louvers made with 4mm thick glass, screws, nails etc. including cost and conveyance of all materials, all labour etc. complete as directed by the Engineer in charge.

Providing and fixing in position fully glazed aluminium super sliding window/ventilator with lock system, powder coated aluminium heavy section with sliding shutters using following sizes or nearest available size 63.5 x 31.75 x 2mm for frames, 38.10 x19.5 x 2mm for shutter interlock, vertical and horizontal and plain glass 4mm thick including all fixtures like hinges, locking arrangements, handles, EPDM beadings etc including cost and conveyance of all materials, labour, other incidentals etc. complete.

Provinding and fixing electrification work inside material&HR office , toilet and bathrooms including all lights,switch boards,exhaust fans,AC etc list and work is attached.

arcoma

Tawakkal Fabrication

vagmine marine care