ADDN/ALTN/IMPROVEMENTS TO SMQs PH-II AT AFA HYDERABAD

Amount

Demolition of PCC in roof surfaces including existing treatment and demolition of PCC under sunken floors of bathroom including floor tiles rooms flooring etc of any description and in any position not otherwise specifically provided, etc complete all as specified and as directed.

Demolition of RCC lintels, chajja, slab cover, beams of any description and height upto 3m to 5m, not other wise specially provided and in similar works etc complete all as specified and as directed.

Removal of debris (Aggregates, sand mortar and broken tiles) obtained from demolition / dismantling tiles received in small broken pieces and taking down plaster, including loading and unloading to a distance of 5km from the starting point and deposited where directed etc complete all as specified and as directed.

Material and labour for Making good with Cement mortar 1:4 under cills or over arches, lintels and bressummers, including all pinning when necessary, at any height with necessary scafoldings etc all as specified and as directed.

Demolition of brick/stone masonry built in cement mortar of any description, etc complete all as specified and as directed.

Material and labour for pre-cast cement concrete block masonry of type C1 1:3:6 (using 20mm graded stone aggregate) with solid blocks exceeding 10cm in width and setting in cement mortar 1:4 in parapet walls at any height etc complete all as specified and as directed.

Material and labour for providing plain cement concrete type B-1 1:2:4 (20mm grade aggregate) in roof padding concrete of average 50 mm thick with water proofing compound as per manufacturers instructions etc complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

Material and labour for rendering 10mm thick in cement mortar 1 : 3 mixed with water proofing compound as per manufacturers instructions on concrete surfaces when PCC on roof surfaces is still green including finished even and smooth etc for easily laying of APP membrane on roof, complete all as directed (WPC will be measured & paid separately under relevant Item).

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified.

Cleaning the roof surfaces and applying oil bound bitumen primer @0.20 Kg per Sqm providing and laying 4mm thick APP modified water proofing membrane weight not less than 4 Kg per Sqm reinforced with non woven polyster mat weight not less 160 gm per Sqm having softening point not less than 140 Degree centigrade, longitudinal tensile strength not less than 800N per 5 cm teasing strength of 180N with minimum of 10 cm side laps and 15 cm end laps by application of torch. Applying a coat of blown grade hot bitumen over the membrane @ 1.20 kg/sqm as per manufacturer instructions etc complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 20mm thick for laying roof tiles in CM (1:6) etc complete all as specified.

Material and labour for cement concrete tiles 20cm X 20cm X 20mm thick machine pressed, set jointed with grey cement and no pigment and pointed in neat cement slurry in floors, and cut and polished, complete all as specified and as directed.

Material and labour for applying one coat of solar reflective bituminous aluminium paint over a surface of APP water proofing membrane@ 0.1 Kg/sqm etc complete all as specified and as directed.

Taking up or down 15mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

Taking up or down 20mm bore of pipe steel tubing and connections, including for refixing or removal etc complete all as directed.

Supply and fix 15 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Supply and fix 20 mm bore steel tubing medium grade galvanised with all fittings and fixed complete to walls, ceilings or laid in floors etc complete all as specified and as directed.

Refixing old 15 mm GI tubing obtained from Sl Item No:14 of any grade, fixed with all necessary fittings / connections in new or old positions to walls and ceilings or laying in floors etc complete all as specified and as directed.

Refixing old 20 mm GI tubing obtained from Sl Item No:15 of any grade, fixed with all necessary fittings / connections in new or old positions to walls and ceilings or laying in floors etc complete all as specified and as directed.

Cutting chases for concealed water tubing in Brick or stone walls or concrete surfaces and making good to facings where required and pointing in cement mortar 1:3, cutting not exceeding 10 cm girth etc complete all as specified and as directed.

Material and labour for providing PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) average 25 mm thick with water proofing compound as per manufacturers instructions, finished even and fair in bottom portion of sunken floor portion and without WPC as in sub bases etc complete all as specified and as directed. (WPC will be measured & paid separately under relevant Item)

Material and labour for rendering 15mm thick in CM 1 : 3 on fair faces of brick or concrete surfaces mixed with water proofing compound as per manufacturers instructions finished even and smooth in sunken portion without using extra cement etc complete as specified and as directed. (WPC will be measured & paid separately under relevant Item)

Material and labour for Applying a uniform coat of blown grade bitumen 85 / 25 @ 1.20 Kg per Sqm conforming to IS 702 over a coat of bituminous primer @ 0.70 kg per sqm and over that laying water proofing 3mm thick APP based polymeric membrane of weight not less than 3 Kg per Sqm reinforced with polyster non woven fabric (wt not less than 150 gms/sqm) laid on prepared surface by forced application as per manufacturers instructions in sunken floor etc complete all as specified and as directed.

Material and labour for providing PCC 1:5:10 type E2 using 40mm graded stone aggregate filling and mass concrete etc complete as specified and as directed.

BLANK

Supply only integral water proofing compound as per manufacturers instructions complete all as directed.

Supply and fix 40 mm dia GI pipe as spouts in sunken floors, medium grade etc complete all as specified and as directed

Dismantling floor hearth or existing wall tiling including cement mortar bedding (but not backing) including removal of debris from the site, etc complete all as specified and as directed

Material and labour for Screed bed or bedding layer of cement mortar 1:6, 10mm thick for laying floor finishes complete all as specified and as directed.

Material and labour for Joint free Non Skid ceramic colour tiles of premium quality 7 to 8 mm thick, (square / rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour tiles, complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1 : 4 on brick or concrete surfaces to receive as backing of wall tiling etc complete all as specified and as directed.

Material and labour for Joint free Glazed coloured ceramic tiles of digital quality in vertical surface 350x250mmx7-8mm/ 450X300X7-8mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note: Colour of tile will be finalized by Engineer-In-Charge)

Material and labour for roughening surfaces of old concrete floor by picking, hacking for keys, sweeping clean and washing down with water to remove dust, etc. for preparation for tiling complete all as specified and as directed.

Material and labour for spreading of Cera Bond or equivalent Chemical at 6.00 Kg per Sqm for fixing floor tiles complete all as specified and as directed.

Material and labour for Joint free Glazed colour tiles of premium quality 7 to 8 mm thick, (square / rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the colour tiles, complete all as specified and directed.

All as per Item No.35 above but in vertical surfaces of skirtings etc complete all as specified and as directed.

Material and labour for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM (1:6) etc complete all as specified and as directed.

Material and labour for 18 to 20 mm thick Granite work (table rubbed and polished) black coloured, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and as directed.

Material and labour for rounding to edges of stone slabs one edge, in cooking platforms complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces at any height with necessary scafoldings, finished even smooth without using extra cement complete all as specified and as directed.

Material and labour for external rendering 15 mm thick cement plaster in CM 1:4 in two layers 5mm thick with WPC/liquid as per manufacturers instruction over 10 mm thick on fair faces of brick work or concrete surfaces at any height with necessary scafoldings, finished even smooth without using extra cement (WPC will be measured & paid separately under relevant Item) complete all as specified and as directed.

Material and labour for rendering 10 mm thick in cement mortar 1:4 on ceilings & soffits of stair case waist slab, beam bottom, etc, of concrete surfaces at any height with necessary scafoldings, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered internal wall surface and applying two coats of distemper oil emulsion over a coat of Alkali resistant priming paint over the coat of 3mm thick wall care putty etc complete all as specified and as directed

Material and labour for preparing of newly plastered external wall surfaces and applying two coats of cement based paint over a coat of cement primer, etc complete all as specified and as directed.

Material and labour for preparing of newly plastered surfaces of ceiling and applying three coats white wash etc complete all as specified and as directed.

Supply and fix in repairs of Vitreous China wash basin, white, flat back, size 580x450mm excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified and as directed.

Supply and fix in repairs of Waste coupling of 32 mm chromium plated for glazed ware basins with long screwed shanks and fly-nuts etc complete all as specified and as directed.

Supply and fix in repairs of Pillar taps 15 mm dia, cast copper alloy Long nose, chromium plated fancy type with capstan head screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore etc complete all as specified and as directed.

Supply and fix in repair of Bib taps, CP fancy type with capstan head screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe etc complete all as specified and as directed.

Supply and fix in repairs of stop valves / angle cocks 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete all as specified and as directed.

Supply and fix in repairs of stop valves(concealed type) 15mm dia CP fancy type with capstan head screwed down high pressure screwed both ends for iron pipe or for unions, of 15mm bore etc complete all as specified and as directed.

Supply and fix in repairs of Vitreous china squatting pan, Orissa pattern of size 580 x 440mm,white with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, and with P or S trap, including making good to floor complete all as specified and directed by Engineer-in- charge.

Supply and fix in repair 10 lts PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets for flushing cistern and connections to pipes including long bends etc complete all as specified and as directed.

Supply and fix in repairs of PVC waste pipe 32 mm bore, 900 mm long etc complete all as specified and directed by Engineer -in- charge.

Supply and fix in repairs, PVC connection 15 mm bore with brass cp nuts, of length 450 mm complete all as specified and as directed.

Supply and fix High density polyethylene pipes 32mm(HDPE) with collar of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Supply and fix in repairs for 15 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs for 20 mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs for 125 mmsize brass CP shower rose fancy type, all as specified and as directed

Supply and fix in repair of stainless steel gratings 100mm dia, hinge or open able type, fixed with suitable solvent cement etc complete all as specified and as directed.

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.

Supply and fix in repairs stainless steel sink with drain board of overall size 915mmx460mm bowl size 410mmx330mmx160mm with draining board made out of stainless steel 1 mm thick for kitchen with plugs, washers and waste pipe including cast iron cantilever brackets and connecting to union / pipe complete all as specified and as directed.

Supply and fix in repairs brass CP fancy tubular towel rail of 20 mm dia, D type 600 mm long between flanges, including brackets complete all as specified and as directed.

Supply and fix PVC cabinet of size 585x290x215, complete all as specified and as directed. Cat No; CC-252 of Pearl precision products or equivalent in prayag or equivalent approved by GE.

Supply and fix Dish/plate Display Rack Stainless Steel of thickness not less than 0.63mm, Hand Made - Wall Hanging (Approximate size 600mm x 900mm x 250mm), complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or in floors, etc complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or in floors, etc complete all as specified and as directed.

Supply and fix 110 mm dia bore PVC (SWR) bends, any radius with oval access door, etc complete all as specified and as directed.

Supply and fix 110 mm dia bore PVC (SWR) bends, any radius, etc complete all as specified and as directed.

Supply and fix 75 mm dia bore PVC (SWR) bends, any radius with oval access door, etc complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR) vent cowl, etc complete all as specified and as directed.

Supply and fix 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal with access door, etc complete all as specified and as directed.

Supply and fix in repair of Cast iron Nahani trap of 75mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified and as directed.

Supply and fix in repair of Cast iron floor trap of 100 mm size with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), including taking down existing of any description etc complete all as specified and as directed.

Supply and fix in repairs Salt glazed stoneware gully trap, P type 150x100mm, including taking down existing of any description etc complete all as specified and as directed.

Complete removal of the existing treatment on walls and applying three coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Complete removal of the existing treatment on ceilings and applying two coats of white wash including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of the existing old treatment on walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer over 3mm thick wall care putty, including preparation of surfaces complete all as specified and directed by Engineer-in-Charge.

Material and labour for complete removal of existing painting on old plastered or unplaster surfaces on walls including cornices by applying two coats of cement based paint over a coat of cement primer, colour and all as specified and directed by the Engineer-in-Charge.

Material and labour for complete removal of existing painting on old plastered or concrete facia/cornice surfaces and applying two coats of sandtex matt painting over a coat of primer etc complete all as specified and as directed.

Material and labour for preparing old painted wood and wood based surfaces of any description, not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old painted steel and iron surfaces of any description, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Material and labour for preparing old painted steel and iron Surfaces, plain or moulded, not exceeding 10cm width or girth when unconnected with other painting or when painted in a different tint, not otherwise described applying one coat of synthetic enamel paint all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks setting aside and hoisting of PVC water tank of capacity exceeding 250 litres & not exceeding 500 litres including cleaning and removing all scale & dirt, etc from tanks, required reconnecting and re- fixing in position all scale and dirt etc from tanks and writing date of cleaning and due date of cleaning, etc all as specified and as directed.

Supply and fix Rotational moulded PVC water storage tanks of 500 ltrs capacity (cylindrical vertical with closed top), three layered, hoisted and fixed in position including out let and inlet connections including dismantling existing water tanks of capacity 500 litres, all as specified in SSR part–I and as directed.

Supply and fix 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

Supply and fix in repairs 20 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe (minimum weigh 210 gms) complete all as specified and as directed.

Supply and fix in repairs, PVC Tank cover for 500 ltrs tanks, etc complete all as specified and as directed.

Supply and fix Stainless steel of Grade SS-202 (thickness not less than 1mm) tubular curtain rails 20mm dia etc complete all as specified and as directed.

Supply and fix 20mm dia fancy type brass chromium plated curtain end finials, etc complete all as specified and as directed.

Supply and fix stainless steel brackets suitable for 20mm dia curtain rails, etc complete all as specified and as directed.

Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or steel window / door frames with shutters (without taking off shutters from frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description of area exceeding 1.0 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Material and labour for providing PCC 1:2:4 type B1 using 20 mm graded aggregate for bed blocks for securing hold fast and the like including weathering, slightly rounded or chamfered angles and throating, with necessary formwork in haunching and padding on chajjas, approachable / unapproachable areas of any height etc complete all as specified and as directed.

Supply and fix Pressed steel frames 105x60mm size, for doors with single rebates including necessary fixing lugs, lock strike plate etc, complete all as specified and as directed.

Supply and fix Pressed steel frames 125x60mm size, for doors with double rebates including necessary fixing lugs, lock strike plate, etc, complete all as specified and as directed.

Material and labour for providing PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in filling of hollow portion of pressed steel frame etc complete all as specified and as directed.

Supply and fix 30mm thick factory made flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix 35 mm thick factory made second class hardwood glazed / gauzed and skeleton door shutters, open rebated and prepared to receive glass, gauze, mesh etc with sash bars divided into squares with plain chamfered or rounded mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I Section 8, clause 8.20 and fixed to chowkats complete all as specified and as directed.

Supply and fix Powder coated (Thickness not less than 50micron) Aluminium Three Track Sliding windows of Approximate size 2000mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 92x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings complete all as specified and directed.

Supply and fix Powder coated (Thickness not less than 50micron) Aluminium Two Track Sliding windows of Approximate size 115mm x 1200mm made out of anodised aluminium extruded section Outer Frame with gutter 61.85x45.5x1.50mm and Shutter section 40x18x1.50mm fully glazed including 5mm thick sheet glass, rubber gasket, Aluminium beading, suitable fancy type handles, locking device, rollers and all other required Hardware fittings complete all as specified and directed.

Supply and fix Powder coated (Thickness not less than 50micron) Aluminium ventilators of approximate size 600mm x 800mm, top hung type made out of anodised aluminium extruded section outer frame size 63.5x38.1x1.5mm and shutter section 37.5x15x1.36mm glazed with and including 5mm thick tinted glass, suitable aluminium hinges, aluminium tower bolts, rubber gasket, aluminium beading, suitable fancy type handles, peg stay and including all other required fittings complete all as specified and directed.

Supply and fix Powder coated (Thickness not less than 50micron) Anodised Aluminium frame for windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix Powder coated (Thickness not less than 50micron) Anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed.

Supply and fix 4.80mm thick Sheet glass, ordinary quality, in squares exceeding 0.5 sq. m each pane and fixed to aluminium frames or shutters of any description complete all as specified and directed by Engineer in charge.

Supply and fix Powder coated (Thickness not less than 50micron) Aluminium anodised Grill, aperture not exceeding 75 mm, size 6mm x 4mm thick, including 1 mm thick U channel of size 15mm x 10mm fixed with steel screws complete all as specified and directed.

Supply and fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as directed

Supply and fix in repair MS framed work such as in grills and framed guard bars for windows/ventilators with ends of bars shouldered and/or riveted, or forget into spikes etc and similar work conforming to Fe 290, Gde E 165 etc complete all as specified and as directed

Supply and fix Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc all as specified and as directed

Supply and fix Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C' type GI or 40 x 20 x 19 of MS pipe as stiffener & supplying & fixing in frame at site complete all as specified and as directed

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm and refixing the same in same openings after repairing or cutting bottom as per site requirement, complete all as specified and as directed

Supply and fix butt hinges of 100mm size, medium weight cold rolled mild steel and fixed etc complete all as specified and as directed.

Supply and fix butt hinges of 100mm size, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type C-21 complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix tower bolt 150mm long, extruded aluminium anodised complete all as specified and as directed.

Supply and fix 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix 300mm long mild steel ordinary rat and tail rod pattern springs, including roller and roller plate complete all as specified and as directed.

Supply and fix 50 mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix second class hardwood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles not exceeding 200 cucm each complete all as specified and as directed.

Supply and fix 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor, etc complete all as specified and as directed

Running welding in repairs of thickness of metal not exceeding 6 mm etc complete all as specified and as directed.

Material and labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint (ordinary tint) over a coat of pink primer, complete all as specified and directed.

Material and labour for preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer on newly treated steel surfaces of any description, not otherwise described over 10 cm width or girth complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thick above or below ground level, etc complete all as specified and as directed.

Material and labour for hardcore of gauge not exceeding 63 mm of broken stone boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for providing 75 mm thick Cement concrete in Sub base to pavings, type D2 1:4:8 (40 mm graded aggregate) complete all as specified and as directed.

Material and labour for providing 75 mm thick Cement concrete, type B-1, 1:2:4 (20mm graded stone aggregate) as in pavings, etc finished even and smooth without using extra cement, complete all as specified and as directed.

Material and labour for forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A, etc complete all as specified and as directed.

Material and labour for providing 75 mm thick plain cement concrete 1:3:6 type C2 using 20mm graded stone aggregate as in plinth protection etc., finished even and smooth without using extra cement complete all as specified and as directed.

Complete removing of plants including roots by dismantling / cuttings etc of brick work / PCC / RCC including necessary scaffolding, any type, any location /height ( i.e. roof, parapet walls near pipes etc.) and applying conc Acid after removing roots for preventing the regrowth and making good the disturbed portion using PCC 1:2:4 Type B-0 and plaster in CM 1:3 (size of disturbed portion 150 x 150 x 150mm) complete all as specified & directed by Engineer- in -Charge.

Material and labour for cleaning the spalled concrete covers, exposed reinforced corroded bars with water and applying two coats of ZINC RICH anti corrosive coat on bars and then replaster the same with cement mortar 1:4 of average thickness of 40mm, all around with WPC on ceilings & soffits of stair case waist slab, beams of concrete surfaces at any height with necessary scaffoldings, finished even and smooth without using extra cement with necessary bonding agent as directed. Make: Build core chemicals, STP limited, Dr.Fixit or equivalent approved by GE.

Material and labour for taking down existing pointing of any description including racking out joints, hacking for keys, scrubbing down with water and providing raised pointing to old stone walls surfaces of any description, with necessary scaffoldings, by using cement mortar 1:3 complete all as specified and as directed.

Material and labour in repair Second class hard-wood in scantlings, clean sawn, fixed to existing chowkats or to walls, etc complete all as specified and as directed

Material and labour for Second class hardwood Plain fillets in cupboards, shelves, etc exceeding 13 sqcm & not exceeding 25 sqcm, square, rectangular or triangular in section, clean sawn, secured with mills or brads, etc complete all as specified and as directed

Material and labour for Second class hardwood Plain fillets in cupboards, shelves, etc exceeding 6 sqcm & not exceeding 13 sqcm, square, rectangular or triangular in section, clean sawn, secured with mills or brads, etc complete all as specified and as directed

Material and labour for 18mm thick Marine plywood of First Grade, fixed with screws as in cupboards, sides of shelves, partitions and in similar works, etc all as specified and as directed..

Material and labour for 12mm thick Marine plywood of First Grade, fixed with screws as in cupboards, sides of shelves, partitions and in similar works, etc all as specified and as directed.

Material and labour for 0.9 mm thick Decorative laminated sheet type 1 of surface finish coloured and pattern as approved and fixed over plywood with approved adhesive all as specified.

Material and labour for external teak wood lipping, 6mm thick, fixed with nails 19mm wide complete all as specified and as directed.

Supply and fix Continuous (piano) hinges, brass width of flap 30mm bright finish or electro galvanised, all as specified and as directed.

Supply and fix 100mm long extruded aluminium alloy handles, cast type anodised complete all as specified and as directed.

Supply and fix in repairs of 100mm aluminium anodised Hasp and staple, safety type, with hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed.

Supply and fix tower bolt 100mm long, extruded aluminium anodised complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m width and not exceeding 1.5 m in depth for foundation or cesspits, manholesholes etc not exceeding 10 sqm on plan and not exceeding 1.5 m in depth or getting out in soft/loose soil, complete all as specified and as directed.

Demolition and breaking up drain / sewage pipes 150 mm dia, (Salt glazed ware, AC or Reinforced concrete) set in concrete mortar, complete all as specified and directed.

Cutting holes into or through stone wall built in cement mortar or cement lime mortar and walls of cement concrete, of superficial area exceeding 400 sqcm but not exceeding 0.10 sqm, complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose soil, complete all as specified and as directed.

Removing excavated material exceeding 1.50 KM but not exceeding 5 KM distance and depositing where directed, complete all as specified and as directed.

Material and labour for providing PCC 1:4:8 type D2 (using 40mm graded stone aggregate) for concrete bed of 10cm thick, to drain pipes of 150mm dia including packing under and hunching against sides of pipes after they are laid and tested etc complete all as specified and as directed.

Supply and fix 150 mm bore, Salt- glazed stoneware drain pipes laid in trenches and jointed, complete all as specified and as directed.

Cutting into existing manholes for connecting new drain of 150 mm dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1 / 2 round or 3 / 4 section) in cement concrete 1:2:4 type B-1, smooth finished and reforming benching as required, complete all as specified and as directed.

Material and labour for providing precast cement concrete type B1 1:2:4 (20 mm graded aggregate) in landing, cover slabs manholes, chullah hoods, chajjas, water troughs, shelves and similar articles with plain faces set in cement mortar 1:4, completed all as specified and directed.

Supply and fix mild steel TMT bar 8 mm dia. and over, cut to length, bent to shape as required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Taking down the unserviceable point wiring (light, fan, socket or power) complete with fittings such as switches, sockets ceiling roses pendent regulators, sockets etc any light points and making good disturbed surfaces of walls and floors etc complete and servicable light fitting shall be deposited at MES store yard for further maintenance work complete all as specified and as directed.

Taking down unserviceable MCBs, DBs with MCBs, Main switches complete all as specified and directed.

Removing the existing metering board from the existing wall after removing the un serviceable meters and making good distrubed surfaces of wall as specified and directed. Note :- (i) Old unserviceable KWH meters shall have to be deposited to MES store

Supply, Installation, Testing & commissioning of Indoor type, wall mounted (with bolts and nuts) meter cabinet of size 1.20(H)mtrx0.9(W)mtrx0.20(D)mtr and made out of 2mm thick CRCA MS sheet with front door having glass window for viewing KWH meter and other doors shall be openable. All door should have neaprene rubber gasket and locking arrangements. The cabinet shall be painted both internally and externally with powder coated paint (shade : RAL 7032 SIEMENS GREY). The cabinet shall be dust and vermin proof with degree of protection IP 43. The cabinet shall be comprising with the following accessories:-

(a) Four pole MCCB, 63Amps with breaking capacity of 16KA having adustable thermal and fixed magnetic release. (b) Aluminium bus bars for 3-phase & nuetral of current carying capacity up to 200Amps dully mounted on FRP/DMC insulators and necessary drilling for connections and duly covered with heat shrinkable PVC sleeves of standard colour code. (c) AC Single phase two wire, tamper proof, static meter of class 1.0, 240V, 50Hz basic current 5-30A, Max continuous current 600% of basic current confirming to IS 13779 and relevent IEC standards with inbuilt low power radio frequency (LPRF) communication facility in mesh network with default and on demand display billing data generation facility, anti-tamper features microprocesser and LED/LCD based CIRCUIT (04Nos) Make of static meter : L&T , Capital, Cyantech, Secure (d) MCB SPN 32Amps, 10KA - 5Nos. (04Nos for meters, 01 for Spare) (e) MCB SPN 10Amps-01 (1 for Security lights & Stair case ) (f) Analog type timer up to 16Amps capacity single phase 230voltage for building security lights & common lighting.

(g) Two way bakelite connector with nut, bolts and wahsers suitable for connecting the outgoing wires in the cabinet - 6Nos. (h) Internal wiring of meters / MCB / Cable connector shall be carried out with 10Sqmm copper conductor unsheathed, multistranded / flexible, PVC insulated, 1100volts grade, single core cable of standard colour code for phase & neutral including necessary lugs /nuts /bolts / washers etc. (j) LED phase indicating lamps (RYB) with control MCB (SP-2Amps) - 3Nos. Note :- (i) Rate deemed to be inclusive of disconnection/ reconnection of existing incoming/ outgoing cables/ wires complete. (ii) MCBs of B series and C series to be used as directed by Engineer in charge respectively for resistance and indication loads. (iii) Make of MCB/MCCB : L&T, INDO ASIAN, LEGRAND

Taking down ceiling fan, dismantling blades and removing fan and refixing ceiling fan after completion of re-wiring and connecting up by cleaning / oiling etc including provision of 3core flexible round cable from ceiling rose or connector to fan all as directed.

Material and labour for point wiring with 1.5 Sqmm copper conductor unsheathed, multistranded, PVC insulated, 1100volts grade, single core cable with earth continuity conductor of 1.5 sqmm PVC insulated copper conductor and including rigid PVC Casing & Caping of suitable size with accessories fixed in stone wall etc., Including terminal boxes made out of 1.2mm thick MS sheet for switches, fan regulators socket outlet etc along-with 3mm thick top laminated Bakelite sheet for housing switches, sockets, regulators etc for One light point controlled by one one way 5 Amps switch

Note (i) : Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Same size wire shall be used for phase, neutral & earth conductor (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

All as per item No 162 above but one light point controlled by two, two way 5 Amps switch

All as per item No 162 above but one ceiling fan /Exhaust fan point controlled by one 5 Amps switch

All as per item No 162 above but socket 5 amp on independent board.

All as per item No 162 above but one 3/5 pin socket out let 5 amp on same board with other switches.

All as per item No 162 above but one bell/buzzer controlled by one 5 Amps push button switch.

All as per item No 162 above but wiring with 2.5 sq mm copper cable with 2.5 sq mm for one earth continuity cable for 6 pin 15 Amps socket out controlled by 15 Amps switch.

Material and labour for cutting chases, pinning in making good to facings on brick wall / stone, concrete block where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sun shades, shelves, lintels, etc.; and cutting chases for concealed PVC conduit wiring, etc., and making good, cutting not exceeding 10 cm girth including painting / colour washing / distempering complete all as per existing specifications of the surroundings complete all as specified and as directed.

Supply and fix switch socket combination 5 A/ 15 Amps 5 in 1, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1, 5 Pin 5 Amps, multipurpose flush type, ISI marked complete all as specified and as directed.

Supply and fix socket outlet 3/5 pin 5 Amp flush type ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type, single pole, one way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fix switch piano flush type, single pole, two way, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fix bell push, 5 Amps, 230 volts, ISI marked complete all as specified and as directed.

Supply and fix ceiling rose, three terminal, PVC/polycarbonate, isolated body, ISI marked complete all as specified and as directed.

Supply and fix Bell Multi Music type AC 230 V complete all as specified and as directed.

Supply and fix stepped type (3 steps) electronic fan regulator flush type all as specified and as directed.

Supply and Fix angle holder/batten holder insulated bakelite complete all as specified and as directed.

Supply and fix surface mounting / wall mounted LED tube light fitting 1x18 to 20Wwatts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

Supply and fix surface mounting / wall mounted LED tube light fitting 1x8 to 10watts high efficiency, anti glare, maintenance free operation including LED driver and mounting arrangements, all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size all as specified and directed by Engineer-in-Charge.

Supply and fix 1x10W LED Bulkhead fitting housing with high pressure die cast alluminium, poly carbonate front diffuser cover including LED driver, Lamp and all accessories internally pre-wired, connecting up with twin core twisted flexible copper conductor cable white colour with suitable size including taking out old unserviceable one complete all as specified and directed by Engineer-in-Charge.

Supply and fix LED security light luminaries 20 to 25W including suitable in-built driver and complete accessories with MS housing finished & having clear acrylic cover, and including GI Pipe light grade 25 mm for brackets not more than 1.5 Mtr length with necessary clamps, nut bolts etc complete with necessary connection all as specified and as directed. NOTE: GI bracket light grade 25 mm dia 1.5 Mtr length with necessary clamps nut bolts will be paid seperately

Material and labour for Sub Main wiring PVC insulated cable 2 single core 6 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit of suitable size with all necessary fittings, on surface of walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly and after taking out the existing sub-main wiring etc. complete all as specified and directed by Engineer-in-Charge.

Note (i): Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii)Three runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by as per IS

Material and labour for Sub Main wiring PVC insulated cable 4 single core 16 sq mm 1100 V grade (nominal area) single core PVC insulated unsheathed cable multi-stranded copper conductor drawn through and including medium grade, rigid non-metallic PVC conduit of suitable size with all necessary fittings, concealed in walls/roof/floor duly earthed with one run of single core cable of same size but green in colour as continuous earthing wire and connecting to common earth dolly complete and after taking out the existing sub-main wiring etc complete all as specified and directed by Engineer-in-Charge. Note : Cutting of chases on the wall and filling with cement mortar, after fixing of conduit, shall be to be measured and paid seperately under serial item No. 169.

Note:- (i) Necessary PVC rigid junction boxes for identifying junction as required on site/directed by Engr-in-charge for point wiring work with PVC dummy plates shall deemed to be included in the quoted rate. (ii) Five runs of cable and one run of conduit with necessary accessories will be measured as one unit length. (iii) The wiring shall be done strictly by following proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads.

Supply and fix Sheet metal enclosure double door MCB DB SPN 8 way with 100 A rated bus bar & neutral link complete all as specified and directed by Engineer-in-Charge.

Supply and fix MCB SPN 6 to 32A, 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge. Note:- (i) MCBs of B series and C series to be used as directed by Engineer in charge respectively for resistance and indication loads.

Supply and fix MCB SP 6 to 32A 10 KA rupturing capacity complete all as specified and directed by Engineer-in-Charge. Note:- (i) MCBs of B series and C series to be used as directed by Engineer in charge respectively for resistance and indication loads.

Supply and fix Exhaust fan metal body 300 mm sweep along with louver and making hole to existing wall for fixing exhaust fan complete all as specified and as directed. Make: Crompton Model EXHD300-4-1 or equivalent in BAJAJ/ HAVELLS

Material and labour for earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised earth strip 32X6 mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 40 mm dia GI pipe medium grade for protection of GI earth Strip and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6), type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Note: (i) Cost of GI earth strip and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit

Material and labour for dismantling, shifting of Solar Water Heater 100 LPD Capacity of any make and model along with staging GI stand from SMQ Qtrs without damaging any parts and shifting to same location after completion of roof treatment all as specified and as directed.

Taking down carefully unserviceable GI tubing/PPR pipe 20 mm dia including all acessories complete all as specified and as directed.

Taking down carefully unserviceable GI tubing/PPR pipe 25 mm dia including all acessories complete all as specified and as directed.

Refixing old GI tubing / PPR pipe 20 mm and connection in new or old position (Wall, ceiling, floors etc) complete all as specified and as directed.

Refixing old GI tubing / PPR pipe 25 mm and connection in new or old position (Wall, ceiling, floors etc) complete all as specified and as directed.

Supply and lay 20 mm dia 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed by Engineer-in-Charge.

Supply and lay 25 mm dia 3 layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stabilised and antimicrobial fusion welded having thermal stability for hot & cold water supply all PP-R plain & brass threaded polypropylene random fittings complete all as specified and directed by Engineer-in-Charge.

Material and labour for providing PCC 1:3:6 type C-1 (using 20 mm stone grade aggregate) as in coping/stay of pole etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified and as directed.

Supply and fix GI Pipe bracket light grade of Size 25 mm dia 1.50 Mtr length and bend to shape at 120 Degree with clamps nut bolts etc, complete all as specified and as directed.

Supply and lay LT UG cable, XLPE insulated armoured, heavy duty aluminium conductor multistranded, 1100volts grade, of 16Sqmm x 4core cross sectional area laid in trenches / fixing on walls / poles or passing through GI pipe including connecting up with suitable lugs, nuts and bolts, glands wherever required and testing complete all as specified and as directed.

Supply and fix cable route indicator, consisting of 200mm dia 6mm thick cast iron to be painted with “BLUE” colour with inscription casting as LT Cable and fixed with and including hot dipped GI angle of size 40mm x 40mm x 6mm, 0.60m long, GI bolts, nuts embedded in ground in route of cable with and including PCC 1:3:6 type C2 of size 200mm x 200mm x 300mm all as directed.

Taking out old unserviceable cable, LT 1100V 10Sqmm 2 core from the trench after taking necessary shutdown from the OH LT supply and making good the disturbed surfaces as per existing complete all as specified and as directed.

Excavation in trenches not exceeding 1.50 m wide and not exceeding 1.5 m depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

Material and Labour for road cutting to lay LT UG cable including making good the disturbed surfaces as per existing complete all as specified and directed by Engineer-in-Charge.

Removing excavated materials not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Supply and filling river sand to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified and directed by Engineer in charge.

Supply and lay bricks common burnt clay building bricks, sub-class ‘B’ designation 75 laid in trenches across the trench over the cable as cable protection complete all as directed by Engineer-in-Charge.

Supply and lay Tubes, 'light grade' galvanised 40mm dia, with all fitting and fixed complete to walls and ceilings or laid in floors / trenches / pole complete all as specified and directed.

Supply and fix cable gland double compression type weather proof for 4 core 16 sqmm armoured cable complete all as specified and as directed by Engineer in charge.

Shree Construction Co.

Gnani Builders

RAJ AND CO

Phoenix Infra

M/s RAMA LAKSHMI CONSTRUCTIONS

R. Wadhumal and Sons