Landscaping at public spaces (NDRI to ITI chowk and Gandhi chowk)

Amount

Supply and Fixing "MINI SECRETARIAT" letters in Hindi (7 letters) and English (15 letter of SS gold 18 inch height at 6m to 7m complete in all respect as instructed by engineer in-charge.

Supply and Fixing Maharishi Shushrut Statue of FRP 2.5m sitting height with sitting Platform 7.8ft x 4.5ft [Make: Fiber 300GSM (binani), PU Layered, Copper Finished, 3 layer Casting (waterproof, Repairable)] with MS Support Frame within floor as instructed by engineer in-charge.

Supply and Fixing (at 6m - 7m height) ASHOK STAMBH 1x.75 m height FRP [Make: Fiber 300GSM (binani), PU Layered, 3 layer Casting (waterproof, Repairable)] complete in all respect as per engineer in-charge.

Supply and Fixing (at 6m-7m height) National EMBLEM 1x.5 m height FRP [Make: Fiber 300GSM (binani), PU Layered, 3 layer Casting (waterproof, Repairable)] complete in all respect as per engineer in-charge.

Supply and Fixing harayanavi theme Statues of 4 no. standing human figure statues of 1.8m height of each statue with musical instruments of FRP [Make: Fiber 300GSM (binani), PU Layered, Copper Finished, 3 layer Casting (waterproof, Repairable)] on base as instructed by engineer in-charge.

SITC of static type surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 4000 to 4500Lm. The luminaire should have options for various beam angles: 8⁰/15⁰/25⁰/35⁰/ 60⁰/30⁰x50⁰. Power consumption should be between 42W to 48W at steady state full intensity. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt and each light fixture should be invidually addressable & should be able to operate with any standard DMX512 equipment. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of CREE / LUMILED / OSRAM / SEOUL / SAMSUNG reputed make shall be used for the light fittings. Luminaire should be BIS approved.Luminaire make Bajaj/Phillips/Surya/Crompton/VAK/HPL

SITC of static type surface mounted Narrow/Medium beam Projector luminaire suitable for outdoor applications of Facade Lighting. Luminaires should be enabled with high power LEDs, should consists of highly efficient, UV and temperature-resistant optics with symmetric distribution. With glass cover, clear/powder coated. Luminaire luminous flux range 4500 to 5500Lm. The luminaire should have options for various beam angles: 8⁰/15⁰/25⁰/35⁰/ 60⁰/30⁰x50⁰. Power consumption should be between 48W to 65W at steady state full intensity. Light fixture should be standard DMX512 protocol compatible, the DMX decoder function should be inbuilt and each light fixture should be invidually addressable & should be able to operate with any standard DMX512 equipment. Power factor of the luminaire shall be more than 0.90. Luminaire should be provided with suitable integral/separate non-integral power supply unit. The lumen maintenance L70@ 25 °C of the LED shall not be less than 70% of the initial lumen after 50,000 burning hours. Ingress Protection should be IP 66 or higher. Housing should be made of pressure Die cast Aluminium with 3-4mm thick safety glass. Impact resistance level should be suitable to site condition minimum IK07. Adequate heat sink with proper thermal management shall be provided. Operating Temperature : -10°C to +45°C, Operating Humidity : 10%-90%, Housing to have adjustable base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. LEDs of CREE / LUMILED / OSRAM / SEOUL / SAMSUNG reputed make shall be used for the light fittings. Luminaire should be BIS approved.Luminaire make Bajaj/Phillips/Surya/Crompton/VAK/HPL

Main Control Panel : Fabrication, supplying and installation of outdoor type cubical panel board of suitable size made out of GI sheet 2 mm thick (14 SWG) and powder coated thereafter, duly compartmentalised having door locking arrangement for protection from rain, dust, duly fixed on GI angle iron frame work of size 50 mm x 50 mm x 6 mm (NS) and having following accessories mounted inside the panel including connection, inter connection with aluminium thimbles, earthing with two nos. earth studs, duly powder coated complete etc. as required,Civil Foundation cost for the panel shall be inclusive. Cable gland plates shall be provided on bottom. 2 Nos. earthing terminals shall be provided. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system, lifting hooks shall also be provided in case of large panels. Incomer :25A TPN MCB - 1NOS Outgoing : 16A DP MCB - 3NOS With Astronomical timer and contactor Indication lamps (RYB) with control MCB - 03 Sets Danger notice plate Make : As listed in UHBVNL

Supply of PVC insulated multi core electrical armored flexible 3C x 4Sq mm power cable having less electrical losses. This PVC insulated and round sheathed wire features a bright multi strands copper conductors and it supports voltage grade up to 1100V.

SITC of IP65 "T" power connectors easy and extremely precise locking system. High impact materials long lasting and reliable

SITC of waterproof power junction box /power cable terminal box, IP65 made up of rugged, non-corrosive, high impact polycarbonate, molded nylon encases connectors that use screw compression to secure the wires, protection against water jets and dust from all directions, includes 5 Way min 10A connector terminal block Max. dimension : 80 * 250 * 85mm

1 Mali, Maintenance of fine grass lawn for one year including fertilizer application, DAP @ 20gm/sqm, urea 40gm/sqm, watering, weeding, top dressing with good earth and manure mixture 2:1 @ 0.01cum per sqm, maintaining fine level, regular mowing and removal of rubbish with all lifts and leads,Maintenance of shrub for one year including weeding, hoeing, plant protection, watering from Deptt. source, application of 10 ml chlorpyriphos four times(as and when required) in a year , 0.0289cum FYM each, 20 gm urea and 20 gm DAP twice, replacement of casualty etc. with same species and same age of plant.With equipment Water & all maintance complete.

Bidder Name

Amount

M/S Singla Construction Co.(GSTN-06BDPPS4086R1ZE)

JKSS Developres LLP(GSTN-NA)

M/S Singla Construction Co.

JKSS Developres LLP