cut section working model of new generation vehicle

The demonstration system should consist of a sectioned petrol engine of Maruti Ciaz car.The engine should be cut at different locations to display its components like piston, cylinder, crank shaft, cam shaft etc. Auxiliary systems like oil sump, starter, alternator, radiator, air cleaner etc. are also cut in order to show their construction details. All the engine assemblies should be repainted using automotive grade paints & color coded so that students can understand the constructions details. The engine should be able to run at low speed (12-15 RPM) using a geared motor connected to flywheel. During the operation, the engine firing order should be displayed using 4 LED indicators. The engine assembly along with the drive system should be mounted on a welded steel frame, fitted with castor wheels for mobility.

The gear box training apparatus should consist of a synchromesh gearbox assembly & shifting lever. The gear box should driven by a low speed motor to simulate power input by engine. A clutch should be provided to engage or disengage the motor & gear box during shifting of gears. The gear assembly is sectioned at suitable locations to show the internal components such as drive shaft, meshing gears.

It should be fully operational ABS trainer, complete with full braking circuit, manufactured using original car components. Simulation of wheel lock to activate ABS actuator. The trainer should consist of four wheel hydraulic brake assemblies & drive motor with variable speed controller. It should also include wheel speed sensor, hydraulic actuator assembly & electronic control unit. The trainer should be able to simulate operation of ABS system at different speeds upto 100 km/h. Pressure gauges to be provided to show individual pressure at each wheel.

Power Window working model should demonstrate operation of a complete power window system using actual car components. The door panel should be cut at suitable locations & covered with transparent acrylic to show power window motor, glass & its operating mechanism. The power window should be operated up & down by using power window switch.

The trainer should consist of a standard Automotive Air conditioning system used in passenger car. It should consist of the HVAC unit, the compressor driven by an electric motor through electric clutch. The trainer should be complete with Control Panel for selection of Air conditioning mode, temperature etc. The actuators of HVAC unit are controlled by this control panel. A hot liquid tank should be provided to generate hot water for heating coil & supplied by a pump capable of handling hot liquids. A completecar dashboard with airconditioning ducts should be installed on the system. All required sensors & electronic components should also be provided.

The power steering working model should be designed to demonstrate operation of electrical Power assisted steering. It should consist of a steering column, electrical motor, controller & simulator console. The student should be able to understand steering assistance as a function of vehicle speed as well as steering moment.

The electrical system trainer should consist of a printed board having wiring diagram representing a typical automotive electrical circuit with all electrical components such as Lighting system, Starting system, Relay board, fuse box and combination switch. The user should be able to carry out the fault diagnosis &study operation of each independent component. A comprehensive user manual including electrical circuit diagrams should be provided for user.

The demonstration system should consist of a sectioned diesel engine of Mahindra Bolero SUV latest edition. The engine should be cut at different locations to display its components like piston, cylinder, crank shaft, cam shaft etc. Auxiliary systems like intake & exhaustmanifolds, fuel supply system, starter, alternator, radiator, air cleaner etc. are also cut to show their construction details. All the engine assemblies should be repainted using automotive grade paints & color coded so that students can understand the constructions details.The engine should be able to run at low speed (12-15 RPM) using a geared motor connected to flywheel. During the operation, the engine firing order should be displayed using 4 LED indicators.The engine assembly along with the drive system should be mounted on a welded steel frame, fitted with castor wheels for mobility.

The gear box training apparatus should consist of a synchromesh gearbox assembly & shifting lever. The gear box should driven by a low speed motor to simulate power input by engine. A clutch should be provided to engage or disengage the motor & gear box during shifting of gears. The gear assembly is sectioned at suitable locations to show the internal components such as drive shaft, meshing gears.

The demonstration system should consist of a sectioned diesel engine of commercial truck. The engine should be cut at different locations to display its components like piston, cylinder, crank shaft, cam shaft etc. Auxiliary systems like intake & exhaust manifolds, fuel supply system, starter, alternator, radiator, air cleaner etc. are also cut to show their construction details. All the engine assemblies should be repainted using automotive grade paints & color coded so that students can understand the constructions details. The engine should be able to run at low speed (12-15 RPM) using a geared motor connected to flywheel. During the operation, the engine firing order should be displayed using 4 LED indicators. The engine assembly along with the drive system should be mounted on a welded steel frame, fitted with castor wheels for mobility.