Removal and SITC of Wood Pyres and APC systems along with OnM and CSMC after 1 Year of DLP period at bhatwadi Cemetery Barve Naga Ghatkopar West

Amount

Work of supply and installation of hood above the pyre made out of 2 mm thick S.S 410 sheet with necessary M.S. supporting angles / channels and providing connection to main duct as per specifications.

Work of supply and installation of damper assembly of 600 mm dia made out of 3 mm thick having 6 mm thick rotating flap inside. The damper shall be provided with S.S chain for smooth operation of damper flap.

Work of supply and Installation of blower/ exhaust fan assembly for capacity of blower will be approx. 18000 CuM / Hr. at 300mm to 400mm WG pressure the impeller and casing shall be fabricated from SS 304 aterial. The impeller shall be dynamically balanced. The blower shall be coupled with 3Ph,440V, 50 Hz T.E.F.C. Squirrel cage inductions motor (Crompton/ABB/Siemens) of suitable capacity, as per ISI specification. The blower assembly shall have silencer with anti- vibration absorbed to reduce noise. The blower casing shall have inspection cover and separate drain plug at bottom to remove moisture entrapped. Including 1 set of rotating element of blower set.

Work of supply and installation of vertical cyclone water scrubber made out of S.S 304 material of suitable design. The thickness of bottom plate shall be 6 mm and scrubber body shall be 3mm thick plate for inner and outer shell, shall be used the spray nozzles, Mist (water) eliminator, water seal system heat resistance inspection- window, sump tank (2 CuM approx.) with foundation, cover, strainer, valve, baffle to separate solid particles from water etc. pump with piping and fitting shall be provided with proper design. Tank made from 6mm thick M.S plate shall be internally painted with chlorinated rubber paint. Suitable size PVC drains pipes shall be connected to the nearest existing MCGM drainage. The scrubber shall have firm support of M.S channels/ I- beam grouted in cement concrete foundation. The design of water scrubber system shall ensure to limit the exhaust emission within the permissible limit as specified by CPCB. Including 1 set of spares water spray nozzles etc. shall be provided along with equipment.

Work of Supply and installation of 600mm dia main duct made out of 2 mm thick S.S 304 plate shall be connected with hood outlet, water scrubber unit, exhaust air blower, bypass arrangement of scrubber etc. the end flanges of ducting shall be 6 mm thick x 40 mm wide made out of S.S 304 material . The ducting shall be provided with S.S. 304 nuts, bolts, washer; asbestos rope etc. ducting shall be installed at site at suitable height with M.S. angle/ channel/ brackets etc. taking support of existing shed M.S. I Beam/ support as required.

Work of Supply & installation of self- supported 30.50M height M.S. 1400mm bottom dia x 700 mm top dia Chimney for system along with earthing stations 2 Nos.

RCC foundation for installation of above M.S. Chimney with M25 grade concrete appxx. 25CuM and epoxy coated steel bar with necessary foundation, bolts, nuts, washer, capnut, temp plat etc.

Work of supply and erection of shed structure to cover scrubber unit: the existing shed including proposed area of scrubber unit, is open from all sides. This area is depend upon as per site requirement. It shall be covered /closed from external East, West & North sides of 6mtr. Length, by providing 20 SWG corrugated F.R.P. sheet of suitable colour. The necessary steel structure support shall be provided to this F.R.P. sheet which shall be secured firmly be virtue of G.I. nut-bolts etc. the south or pyre side of scrubber unit area shall be separated with M.S. grill partition along with at least 4.5mtr wide suitable M.S. door with locking arrangement. The height of shade and partition shall be at least 3mtr Payment to be made as per SQM basis of floor area.

Supply and installation of mobile heat resistance ash curtains shall be made out of heat resistance material. The same shall be fixed with MS fabricated frame 25mm X 25mm square pipe duly painted with heat resistance paint and provided with proper size caster/wheels for easy movement. The size of curtains shall be approximately 4M X 1.5M.

Work of Supply and installation of electrical panel: C.R.C.A steel of 14 SWG for panel, 16 SWG for door shall be used. The panel shall have 25 x25x 3 mm M.S. Angle frame, I.S.M.C. at base, 60 x10 mm S.S. 304 bolts, nuts spring washer , reversible lifting eye/hook, self-draining provision, doors with insulated thumb screw, powder coated knobs, lockable handles, name plates, rating plates & label for caution notice (danger board) with proper description/ details. External and internal white labels shall be engraved and filled with black colour. The switch gears, tinned copper bus bars, separate compartments for feeders,bus bars & switchgears, current carrying capacity as per I.S.standard, voltmeter, ammeter, energy meter. Power factor meter, hour meter & R,Y, B, indicators shall be provided. I&T/ Siemens make components only be used. The panel drawing shall be got approved before fabrication. The panel shall be duly painted & grouted as per site requirement.

Work Supply & laying of 25 mm dia C class GI pipe, flow control valves from makeup water tank. To. If necessary suitable capacity boosters pump shall be provided for makeup water line.

Work of providing and installation to 2000 Ltr. 2 Nos. PVC water tank along with its ladder, inspection cover MS fabricated supporting structure, PCC foundation along with necessary 25mm dia class C GI pipe line etc. in proper manner

Earthing Station with 600 X 600 X 3.15 mm Copper Plate, 3000mm dip with suitable size cu strip earth pit as per IS 3043. The earth pit shall be provided with watering pipe (Class B) with wire messed funnel, 25X3 cu strip / 2X8SWG Cu.wire up to chamber, disconnecting links with 600 x 600 mm (clear) RCC chamber & 3mm thick heavy duty CI chequered plate cover with hinge. Bentonite shall be provided for earth pits. Excavation, back filling, removal of xcess soil is included in the scope

Earthing Continuity Conductors (SP-ME-TS-38) 25 x 3mm Tinned copper

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables 3.5C x 35 Sq.mm

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvanised steel round or strip armoured cables 4C x 2.5 Sq.mm

1.1 kV grade stranded Cu conductor, XLPE insulated, extruded PVC inner and FRLS outer sheathed, galvan- ised steel round or strip armoured cables 4C x 16 Sq.mm

Cable end terminations 4C x 16 Sq.mm

Cable end terminations 3.5C x 35 Sq.mm

Cable end terminations 4C x 2.5 Sq.mm

Excavating the trenches and refilling,reinstatement of the same after the cable is laid in approved manner (750 mm deep, 600 mm wide),in all types of soils 1 Cu. Mtr. = 2.2 RMT

SITC LED Flood Light Fitting -150 W

100/125 Amp. 415V TPN Switchfuse unit with CRCA sheet steel powder coated enclosure with HRC fuses & switch links.

Work of casting,grinding ,drilling and supply of C.I.pyre set

Construction of pyre foundation

Construction of ash pit including excavation, PCC, Brick masonry walls, plastering and with MS cover, Size approx-1.5mtr x 3mtr x 1mtr depth

Supply, fabrication and installation of soundproof acoustic encloser.

Commissioning of the APC system obtaining emission test certificate fromGovernment approved Lab.

Dismantling of Mild Steel Self supported Chimney for size up to 1400mm X600mm at cemetery/ crematorium ground along with breaking of chimney foundation.

Dismantling of old pyre

RCC Breaking of Old Chimney Foudnation (By Compressor Breaking Machine)

Dismantling of complete APC system including Hoods, Duct, Dampers, M S Support, scrubber, Blower, MS Tank , Piping, Electrical Panel, Connection to Chinmey

SITC of exhaust air extractor (Capacity 5000cum/hr) on top of pyre pavilions, including base frame mounting with minor civil work, electrical wiring and connection to control panel, complete in all respect

Rebate of control panel upto 100 Amp. Incomer,capacitor etc

Rebate for old MS self supported chimney size above 1200mm Bottom dia. X 600 mm top dia. and 30 Mtr. Height up to1400mm Bottom dia. X 600 mm top dia. and 30 Mtr. Height

Rebate to take away dismantled old pyre set

Rebate for Two APC system are includes 4 Nos Hood, 2nos Scrubber, 2Nos. Blower, 2 Nos MS Tank, Duct, Dampers, Piping, M.S. Support.

First year operating the air pollution control system round the clock

Second year operating the air pollution control system round the clock

Third year operating the air pollution control system round the clock

Comprehensive Service Maintenance Contract (CSMC) of the Complete System for first year

Comprehensive Service Maintenance Contract (CSMC) of the Complete System for Second year

Nikita Boilers. (BID ID -7054876)

OMEX CONTROL SYSTEM (BID ID -7038351)