Repair and Renovation Work in Avinashiappar Thirumana Mandapam

Chipping plastering including all labour charges

Ac Sheet Removing including all labour charges

Dismantling Brickwork with CM 1:5 mix including all labour charges

Brick Work in following cement Mortar using best quality Fly ash bricks of size 23x11x7 cm for foundation and basement including curing etc., complete complying with standard specification

Cement concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid layers of not more than 15 cm thick well rammed, consolidated and curing etc., complete complying with standard specification

Supplying and filling with gravel including cost and conveyance of gravel and all labour charges for filling ramming etc., complete with standard specifications

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg-m3 and maximum water cement ratio of 0.55 including admixture (Plasticiser-super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability with out impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3.cu.m.) 5156kg. of 10-12 mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg.of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, Centering and shuttering and also including laying,vibrating with mechanical vibrartors, finishing, curing, etc, and providing fixtures like fan clamps in the RCC floor/roof slabs wherever necessary without claiming wxtra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No Separate payment will be made by the Department for the excess usage of materials)

Supplying, Fabricating and placing in position mild steel-Ribbed T or Steel grills for all RCC Works as per design given includiding cost of steel and G.I binding wire in all floors etc., complete complying with standard specification.

Plastering with Cement Mortar 1:5(one cement and five sand)- 12mm thick in all floors including curing etc, Complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of worj such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One cement and Three sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers