Replacement of old rusted CI/GI pipe and its connected items under AGE E/M at Faridkot Mil Stn

Amount

Taking up or down GI Water mains inculding all fitting of 15/20 mm bore complete all as specified and directed by Engineer-in-charge

All as per Item No 01 here-in-before but 25 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 01 here-in-before but 40 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 01 here-in-before but 50 mm bore complete all as specified and directed by Engineer-in-charge.

Taking up or down cast iron water mains inculding all fitting with spigot or socket ends and lead joints including burning out joints and removing lead for 80/100 mm bore pipes complete all as specified and directed by Engineer -in-charge.

All as per Item No 05 here-in-before but 200 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 05 here-in-before but 300 mm bore complete all as specified and directed by Engineer-in-charge.

M&L for CI fitting for spigot & socket pipes, bends, tapers tee pieces ,caps & plugs up to 300 mm bore of pipe complete all as specified and directed by Engineer-in-charge.

M & L for Steel water tubing medium grade galvanised with all fitting laid in trenches/ fixed to wall etc of size 15 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 09 here-in-before but 20 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 09 here-in-before but 25 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 09 here-in-before but 40 mm bore complete all as specified and directed by Engineer-in-charge.

All as per Item No 09 here-in-before but 50 mm bore complete all as specified and directed by Engineer-in-charge.

M & L for Dismantling existing lead joint and providing new run lead joint using old retrieved lead & adding additional lead as reqd at site for 80 mm bore of pipe, complete all as specified and directed by Engineer-in-charge.

All as per Item No 14 here-in-before but 100 mm bore of pipe complete all as specified and directed by Engineer-in-charge.

All as per Item No 14 here-in-before but 300 mm bore of pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed 50 mm dai of pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed 40 mm dai of pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed 25 mm dai of pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed 20 mm dai of pipe complete all as specified and directed by Engineer-in-charge.

S & F in repair Gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe & fixed 15 mm dai of pipe complete all as specified and directed by Engineer-in-charge.

Excavation in trenches n.exc 1.5 mtr width & n.exc 1.5 mtr in depth for foundation/pipe lines etc and getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Returning filling in including spreading leveling watering & and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed by Engineer-in-charge.

Removing excavated material n.exc 50 mtr & depositing where directed at a level n.exc 1.5 mtr above the starting pointing complete all as specified and directed by Engineer-in-charge

S & F in replacement 50/80 mm bore cast iron air release valve flanged type with two air out lets and Including jointing material , such as nuts, bolts, washers and rubber sheet etc.complete all as specified and directed by Engr-in-charge.

Supply and laying CI Pipes of size 80mm with spigot and socket ends centrifugally cast, class LA in trenches as directed and specified by Engineer in charge.

Supply, laying, jointing, commissioning and testing Ductile Iron pipes 100mm bore with spigot and socket and centrifugally cast (Spun) Class K-7 conforming to IS-8329-2000 in any length with & including rubber push (Tyton) joint laid in trenches complete all as specified and directed by Engineer in Charge.

Supply, laying, jointing, commissioning and testing Ductile Iron pipes 200mm bore with spigot and socket and centrifugally cast (Spun) Class K-7 conforming to IS-8329-2000 in any length with & including rubber push (Tyton) joint laid in trenches complete all as specified and directed by Engineer in Charge.

Supply, laying, jointing, commissioning and testing Ductile Iron pipes 300mm bore with spigot and socket and centrifugally cast (Spun) Class K-9 conforming to IS-8329-2000 in any length with & including rubber push (Tyton) joint laid in trenches complete all as specified and directed by Engineer in Charge.

Dismantling valve pit of any size and construction of new brick masonry valve pit of size 1200x1200x900mm (internal size) brick work in cement mortar1:4 over 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate, 20mm thick PCC coping 1:2:4 type B-1 using 20mm thick stone aggregate and internal plaster in cement mortar 1:4 and external plaster 1:6 with mild steel sheet cover 3mm thick and angle iron frame of size 50mm x50mmx6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer including locking arrangement, M&L complete all as specified and directed by Engineer in Charge.

Repair of leaking CI/DI pipe of size 80 mm by providing clamps/socket/union/gasket/ etc and excavaction in trenches, repair, jointng, testing etc complete all as specified and directed by Engineer in Charge. NOTE Exavation, earth work will measured and paid seprately under respective items of BOQ

Repair of leaking CI/DI pipe of size 100 mm by providing clamps/socket/union/gasket/ etc and excavaction in trenches, repair, jointng, testing etc complete all as specified and directed by Engineer in Charge. NOTE Exavation, earth work will measured and paid seprately under respective items of BOQ

Repair of leaking CI/DI pipe of size 200 mm by providing clamps/socket/union/gasket/ etc and excavaction in trenches, repair, jointng, testing etc complete all as specified and directed by Engineer in Charge. NOTE Exavation, earth work will measured and paid seprately under respective items of BOQ

Repair of leaking CI/DI pipe of size 300 mm by providing clamps/socket/union/gasket/ etc and excavaction in trenches, repair, jointng, testing etc complete all as specified and directed by Engineer in Charge. NOTE Exavation, earth work will measured and paid seprately under respective items of BOQ

S & F Single phase preventer for any capacity of motors complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 300mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 250mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 200mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 150mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 100mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 80mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replacement of Cast Iron sluice valve flanged type class PN-1.6 conforming to IS-14846-2000, ISI marked with brass spindle, flanged both ends of size 50mm bore including joint with rubber or fiber board gasket, nut bolts washers as per existing specification and shape complete all as specified & directed by Engineer-in-Charge..

S&F in replalcement of Non Return Valve (Reflux valve) flanged end with by pass charged conforming to IS 5312, ISI marked supplied and installed complete of size 300mm dia flanged end with all fittings complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in kerbs/coping/bed plates and the likes including weathering, slightly rounded or champhered angles with necessary use and waste of formwork for pipe support , finishing even and smooth without using extra cement , complete all as specified and directed by Engineer-in-Charge..

Supply & Fixing PVC cable of copper conductor 3 core submersible 2.5 Sqmm complete all as specified and directed by Engineer in Charge.

Supply & Fixing PVC cable of copper conductor 3 core submersible 4 Sqmm complete all as specified and directed by Engineer in Charge.

Supply & Fixing PVC cable of copper conductor 3 core submersible 6 Sqmm complete all as specified and directed by Engineer in Charge.

Supply & Fixing PVC cable of copper conductor 3 core submersible 10 Sqmm complete all as specified and directed by Engineer in Charge.

Supply & Fixing PVC cable of copper conductor 3 core submersible 20 Sqmm complete all as specified and directed by Engineer in Charge.

S&F in replacement of 3 pole MCCB 630 Amps, 50 HZ 415 volts , 50KA complete all as specified and directed by Engineer in Charge

M&L disconnecting/dismantling and strip opening of worn out/ defective electric motor of any make and Capacity of 75/100 HP, 3 phase 415 volts AC supply, taking out burnt stator winding, servicing cleaning of stator slots, bearing, bushes etc rewinding of stator coils with superior quality of copper enamel wire of existing size and specification including insulating material, Varnishing, china glass paper,'F' class paper,Thick sheet paper ( packing sheet) and drying, and replacement of rusted nut bolts and washer,seal etc, assembling, testing installed and connected at original location complete all as specified and directed by Engineer-in-Charge:- i) Servicing and insulation of rotor assembly . (ii) Strip opening in spare parts and doing above mentioned job works through authorised locally available high skilled mechanic /Electrician at work shop.

All as per item No 51 here in before but of capacity 30/45 HP, 3 phase 415 volts AC supply complete all as specified and directed by Engineer in Charge.

All as per item No 51 here in before but of capacity 3 to 5 HP, 3 phase 415 volts AC supply complete all as specified and directed by Engineer in Charge.

Supply only pig iron (Sikka) in slab form of best quality complete all as specified and directed by Engineer in Charge. Note : Supply only items shall be taken over on charge through necessary Receipt Voucher duly signed by all concerns.

Supply and fix change over switch 630 Amps and four pole, 415 volts, 50Hz, with modular construction positive isolation door interlock and padlock facility in sheet steel enclosure suitable for DG set room complete all as specified and directed by Engineer in Charge.

Supply only gland packing of size 13mm of bext quality complete all as specified and directed by Engineer in Charge. Note : Supply only items shall be taken over on charge through necessary Receipt Voucher duly signed by all concerns. Note :- A Sum of Rs. 1,15,200.00 will be deducted on account of credit for dismantling/demolished/taking down material. Please refer detail on srl page No 23 (Schedule of credit) of Tender Documents.

OBEROI CONSTRUCTION CORPORATION

M/S RAJESH KUMAR and CO.

M/s Balvinder Singh Engineer and Contractors

DEEPAK ENTERPRISES