Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.3 CrAccepted-AOC | ₹1.3 Cr | L-1 | Accepted-AOC Work awarded to lowest Bidder and Performance security has been obtained from bidder. Hence, EMD may be released. |
| 2 | L-2₹1.3 CrRejected-Finance | ₹1.3 Cr | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹1.4 CrRejected-Finance VILLAGE P O KATGAON TEHSIL NICHAR DISTRICT KINNAUR H P | KINNAUR | HIMACHAL PRADESH | 172101 | ₹1.4 Cr | L-3 | Rejected-Finance L-3 |
Tender Value
₹1.4 Cr
EMD Value
₹2.8 L
Closing Date
27 Jan 2026, 6:30 pmClosed
Executive Engineer
Executive Engineer, Kalpa Division, HPPWD Kalpa.
Construction of Sainik Rest House at Reckong Peo in District Kinnaur (HP) (SH- Civil work
2026_PWD_126504_1
PW/KNR-E-Tender/25-10079-88 dated 19-01-2026
Open Tender
Civil Works - Buildings
365 days
Reckong Peo, Kinnaur HP
Please refer Tender documents.
8 documents required · 8 mandatory
₹5,000
₹2.8 L
18 May 2026
22 Jan 2026
28 Jan 2026
22 Jan 2026
27 Jan 2026
22 Jan 2026
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains within all lead and lift including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soil as directed, All Kind of Soil, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Stone soling tightly hand packed under floors, including watering, ramming and consolidating complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 52mm (Fifty Two millimeter ) thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (One cement : Two coarse sand : Four graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 ( One cement hardener mix : Two graded stone aggregate Six mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing form work with steel plates 3.15mm. (Three point fifteen milimetre) thick welded with angle iron in frame 30X30mmx5mm.(Thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden/ steel battens and ballies, height of propping and centring below supporting floor to ceiling any floor/height and removal of the same for in situ-reinforced concrete and plain concrete work in Foundation, footings bases of columns etc. and mass concrete., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Wall (any thickness) including attached pilaster, butteresses, plinth and string courses etc.
Flat surfaces such as soffits of suspended floors, roofs, landings and the like. Floors etc.upto any thickness in all floor level in all heights.
Beams, cantilevers, girders and lintels sides and soffits of beams, beam hunchings, cantilevers, bressumers and lintels up to any depth in all floor level in all heights.
Columns, pillars, posts and struts. Square, rectangular or polygonal in plan, in all floor level in all heights.
Stair cases with sloping or stepped soffits excluding landings in all floor level in all heights.
Edges of slabs and breaks in floors and walls up to any width in all floor level in all heights.
Small lintels not exceeding 1.5m clear Span , mouldings , window cills etc.
Providing and laying cement concrete 1:5:10 (One cement : Five sand : Ten graded/crushed stone aggregate 40 mm (Forty millimeter) nominal size) mechanically mix by concrete mixer and curing complete including cost of centering and shuttering in Foundation and plinth, , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying cement concrete 1:4:8 (One cement : four sand : eight crushed stone aggregate 40mm (Forty millimeter) nominal size) mechanically mix by concrete mixer and compacting with vibrator and curing complete excluding cost of form work in Foundation and plinth, , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (one Cement : three coarse sand) : six graded stone aggregate 20 mm nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg (One point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Making plinth protection 50mm (Fifty millimeter) thick of cement concrete 1:3:6 (One cement : Three coarse sand : Six graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (One cement : one point five coarse sand: Three graded stone aggregate) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Reinforced cement concrete work in walls(any thickness),including attached pilasters,buttresses, plinth and string courses, fillets ,columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (One cement : one point five coarse sand:Three graded stone aggregate 20 mm nominal size) , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Reinforced cement concrete work in beams,suspended floors,roofs having slope up to 15 degree landings, balconies, shelves chajjas,lintels bands, plain window sills,staircases and spiral stair case above plinth level upto floor five level, excluding the cost of centering,shuttering finishing and reinforcement with 1:1.5:3 (one cement : one point five coarse sand) :Three graded stone aggregate 20 mm nominal size) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Steel reinforcement for R.C.C. work (TATA/SAIL/JINDAL/Rashtriya Ispat /or its equivqalent ) including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).2nd (Second) class Deodar wood work in frame of door window , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.2nd class deodar wood , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing 40x5 mm (forty into five milimeter) flat iron hold fast 40 cm long including fixing to frame with 10 mm (ten milimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm (twenty milimeter) nominal size), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in all floor level in all shape s and sizes in : Cement mortar 1:6 (One cement : Six coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level Cement mortar 1:4 (One cement :Four coarse sand), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing Marble stone flooring with 18 mm (Eighteen millimeter)thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20mm (Twenty millimeter) (average) thick base of cement mortar 1:4 (One cement : Four coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Agaria White , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Udaipur green marble
Providing and fixing 12mm (Twelve millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 19mm (Ninteen millimeter) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 19mm (Ninteen millimeter) thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Double strip (horizontal type) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood 50 x12 mm (Fifty into twelve millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing (1st Class )Deodar Wood chamfered edged cover fillet (beading) of size 50X25 mm Stsection with wood screw in ceiling and wall lining including metring at junctions. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 75mm x 75mm (seventy five milimeter into seventy five milimeter) Deodar wood rounded hand rails in straight length complete in 1st deodar teak wood, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing Pine wood panelling with plank size 75 x 25mm (Seventy five millimeter into twenty five millimeter) & 75mm x 12.5mm (Seventy five millimeter into twelve point five millimeter) in combination over frame of wood work (to be paid seprately) with top moulding complete in all respect, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing anf fixing HDF Decorative laminated core board German Kerono Flooring AC4 class 8mm thick placed over cushion of 2mm(Two millimeter) thick expanded polythene foam plus 100 micron thick polythene sheet under lay on 045 beach west including border of required shde and colour in all respcet up to all floor level , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying red sand stone slab flooring 40mm (Forty millimeter) average thick on 20mm (Twenty millimeter) average thick base of cement mortar 1:4 (One cement : four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Polishing two coats with melamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.
Providing and fixing GRC/Garsa stone 12mm (twelve milimeter) cladding on R.C.C. surface side as on faces of Arch masonry walls etc. on 12mm twelve milimeter) Thick cement plaster 1:3 (one cement : three sand) and jointed with cement slurry i/c scaffolding etc. complete, including carriage of materials through all modes of transportation with in all leads and lifts , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 18 mm (Eighteen millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (One cement : Four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding Raj Nagar Plain white marble/ Udaipurgreen marble/ Zebra black marble Area of slab over 0.50 sqm Raj Nagar Plain white marble/ Udaipur green marble/ Zebra black marble Area of slab over 0.50 sqm, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and Fixing M.S. casement Stays 250mm (Two hundred fifty millimeter),including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with necessary screws etc. complete : 300x16 mm (Three hundred into sixteen millimeter) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
250x16 mm (Two hundred fifty into sixteen millimeter)
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250 x 10mm (Three hundred fifty into ten millimeter) , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
150x10 mm (One hundred fifty into ten millimeter)
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (One hundred twenty five millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
100mm (One hundred millimeter).
Providing and fixing aluminium hanging floor door stopper,ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :2nd Class Deodar wood. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.2nd Class Deodar wood 40 mm thick. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Steel work welded in built up sections/ framed work of TATA, SAIL or RASHTRIYA ISPAT or its equivalent, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer usingstructural steel etc. as required. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.,including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete , . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.M.S tube , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying vitrified floor tiles NITCO/Orient /Somany/Kajaria or its equivalent in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 One cement : Four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., completeSize of Tile 800x800 mm , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying Vitrified tiles NITCO/Orient /Somany/Kajaria or its equivalent in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. completeSize of Tile 800x800 mm , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying Ceramic glazed floor tiles NITCO/Orient /Somany/Kajaria or its equivalent of size 300x300 mm (Three hundred into three hundred millimeter) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (One Cement : Four Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 1st quality ceramic glazed floor tiles NITCO/Orient /Somany/Kajaria or its equivalent , conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (One cement: Three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.Size 30x60mm, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Kota stone slab flooring over 20 mm (Twenty millimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) : 25mm (Twenty five millimeter) thick , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Kota stone slabs 20 mm (Twenty millimeter) thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (one cement: Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying 60mm (sixty milimeter) thick faciory made cement concrete interlocking paver block of NTC or its equivalent M-50 (Fifty) grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm (fifty milimeter) thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge, including rubbing and polishing complete.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing valleys 90 cm (Ninty centimeter) over all in plain G.I. sheets fixed with galvanised iron J or L hooks. bolts and nuts 8mm dia G.I. limpet bolts and nuts 8mm dia G.I. limpet . and bitumen washers complete:1.60 mm thick with zinc coating not less than 350 gm/m including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
15mm (Fifteen centimeter) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level including arrises, internal rounded angles, chamfers and/or rounded angles in girth and finished even and sand opapered smooth with cement mortar 1:6 (one cement: six fine sand) Fair side, including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, roya
6mm (Six millimeter) cement plaster to ceiling in cement mortar 1:3 (one cement : three sand), including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.
Providing and applying white cement based putty of average thickness 2 mm (Two millimeter) ,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Finishing walls with 100% Premium acrylic emulsion paint of Asian/Nerolac/Burger or its equivalent having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of requiredshade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Painting Steel work with Deluxe Multi Surface Paint of Asian/Nerolac/Burger or its equivalent to give an even shade.Two or more coat applied @ 0.90 ltr/10 sqm (Zero point nine zero liter per ten square meter) over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eight zero liter per ten square meter), of approved brand and manufacture. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Painting Wood work with Deluxe Multi Surface Paint of Asian/Nerolac/Burger or its equivalent to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm (Zero point nine zero liter per ten square meter) (over an under coat of primer applied @ 0.80 ltr/10 sqm (Zero point eight zero liter per ten square meter) of approved brand and manufacture including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing bright finished brass single acting spring hinges with necessary brass screws etc. complete :150mm (One hundred fifty millimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Constructing course rubble hammer dressed 'U' shape open surface drain w ith side wall, 15x22 cm. in cement mortar 1:6 (One cement: Six sand) and inside plastering with cement plaster 1:3 (One cement:Three sand) including earth work and laying 10cm. Cement concrete in 1:5:10 (One cement:Five sand:Ten graded stone aggregate 40mm. nominal size) and 7.5cm. cement concrete 20mm. nominal size ) and finished with a floating coat of neat cement complete as per standard design. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia (Fifteen millimeter diameter) nominal bore including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
20mm dia (Twenty millimeter diameter) nominal bore :-
Making connection of G.I. distribution branch with G.I.main of following sizes by providing and fixing tee,including cutting and threading the pipe etc. complete : 25 to 40 mm (Twenty five to fourty millimeter) nominal bore. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etc. complete (cost of water meter and stop cock to be paid separately).20mm nominal bore :- including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Constructing masonry Chamber 30x30x50cm (Thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (One cement :Four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (One cement : Two coarse sand : Four graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( One cement : Five fine sand : Ten graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (One cement : Three coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing Polyethelene-Aluminium-Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special ittings of composite material (engineering plastic blend and brass inserts wherever required) e.g.elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-in-charge. 1216 mm (16 mm (Sixteen millimeter )O.D. pipe) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
1620 mm (20mm (Twenty millimeter) OD pipe).
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipe ISI marked including fixing with approved adhesive etc. complete, 110 mm (One hundred ten millimeter) diameter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
75 mm (Seventy five millimeter) diameter.
Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm thick bolts and nuts complete including fixing with approved adhesive etc. 110 mm (one hundred fifty millimeter) diameter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
75 mm (Seventy five millimeter) diameter.
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. 110 mm (one hundred fifty millimeter) diameter including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
75 mm (Seventy five millimeter) diameter.
Providing and fixing P.V.C. collar ISI marked including fixing with approved adhesive etc. complete, 110 mm (one hundred fifty millimeter) diameter. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
75 mm (Seventy five millimeter) diameter.
Providing and fixing PVC floor trap of self cleansing design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete 110mm x 90mm (one hundred ten milimeter into nintey milimeter), including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PVC cowl of size 110mm (One hundred ten millimeter) diameter , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete of size 110 mm x 75 mm dia (one hundred ten millimeter x seventy five millimeter) , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing & fixing White vitreous china water closet squatting pan of Jaguar or its equivalent (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete , One piece closet of size 72x37x4.5 cm closet no 20121) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charg including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china (European type/ wash down type) water closet pan. European seat of Jaguar or its equivalent 71X36X81 NO 21029, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge, including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china (European type/ wash down type) water closet pan. European type WC pan Jaguar or its equivalent No 2090 54x35x39.5 NO 20118, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charg, including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing water closet squatting pan (Indian type W.C. pan ) of Jaguar or its equivalent with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required , White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral type foot rests , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charg, including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wash basin of Jaguar or its equivalent with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty) with a pair of 15 mm (fifteen mllimeter) C.P. brass pillar taps. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing wash basin of Jaguar or its equivalent with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm (thirty two millimeter) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Wash basin, Oval shaped Under counter wash basin No 10049, 56x45 cm (Fifty six into fourty five centimeter) size , with a pair of 15 mm (fifteen mllimeter) C.P. brass pillar taps . including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing stainless steel Kitchen sink of approved standard ISI -No 1022( size 610 X460x229 of Paryag Polymer with C.P. waste with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting.Kitchen Sink No KCG 1012 Of size 610 X460 of CERA With drainaige board) , including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete Solid Type White solid plastic seat with lid: White solid plastic seat with lid, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing white vitreous china flat back half stall urinal of size 430x260x350mm (Four hundred thirty into two hundred sixty into three hundred fifty millimeter), with white PVC automatic flushing cistern of Jaguar or its equivalent , with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required flat back urinal small size of hindware with 5 litre P.V.C.automatic flushing cistern. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 600mm x 300mm (Six hundred millimeter into three hundred millimeter) white vitreous china division plat for urinal or Jaguar or its equivalent including, painting of fittings and cutting and making good the walls and floors wherever required flat back urinal small size of hindware with 5 litre P.V.C.automatic flushing cistern. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge.including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing CP Brass waste (heavy duty ISI marked IS:8931 & 8934) for wash basin or sink including carriage of materials within all leads and lifts including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia (Thirty two millimeter diameter), Flexible pipe. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 100 mm (hundred millimeter) sand cast Iron grating for gully trap, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 750x600 mm (Seven hundred fifty into six hundred millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 600x600mm (six hundred into six hundred millimeter) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour : 600 mm (six hundred milimeter) long towel rail with total length of 645 mm (six hundred fourty five milimeter), width 78 mm (seventy eight milimeter) and effective height of 88 mm (eighty eight), weighing not less than 190 gms., including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimeter) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimeter) long screws, rawl plugs etc., complete, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing charomium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws.including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing toilet paper holder : C.P. brass, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing brass bib cock of approved quality : 15 mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing CP brass pillar tap of Jaguar or its equivalent with capstan head (heavy duty ISI marked IS:8931 & 8934) including carriage of materials within all leads and lifts 15mm dia :- including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. . including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, 15mm (fifteen (millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 15mm (fifteen millimeter) mixer for kitchen sink with top and bottom swiging spout. including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm (forty five centimeter) length, 15 mm (fifteen millimeter) nominal bore, including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing C. P. brass stop cock:- 15mm (Fifteen millimeter ) including carriage of materials through all modes of transportation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing 8 mm (eight millimeter) diameter C.P. / S.S. Jet with flexible tube upto 1 (one)metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge. including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing grab bars in handicaped toilet of CP 40 mm dia (fourty millimeter diameter), steel pipes 78 cm (seventy eight centimeter) heigh welded with MS plate as per detail and position of WC seat.and embedded in cement concrete complete.including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and laying cement concrete 1:5:10 (One cement :Five coarse sand : Ten graded stone aggregate 40 mm nominal size) all-round S.W./ PVC pipes (150 MM DIA) including bed concrete as per standard design including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Constructing brick masonry manhole in cement mortar 1:4 ( One cement : Four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (One cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (Onecement : Four coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (One cement : Three coarse sand) finished with floating coat of neat cement and making channels in cement concrete1:2:4 (One cement : Two coarse sand : Four graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Precast RCC Cemocrate or equivalent (Heavy Grade) cover with frame forgully trape (Standard Pattern): including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Inside size 120x90 cm and 90 cm deep including Precast RCC Cemocrate or equivalent cover with frame (heavy duty) of size 455x610 mm internal dimensions, With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. LD- 2.5 Rectangular shape 610x455 mm (Six hundred ten into four hundred fifty five millimeter) internal dimensions. including carriage of materials through all modes of portation with in all leads and lifts, as per PWD specifications and as per direction of the Engineer-in-charge. including all incidentals. The rates are inclusive of octroi, royaltiy, malkana, toll tax, GST or other taxes imposed by the Government.
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
GCC.pdf
Tender Documents • 5.14 MB
BOQ_186532.xls
BOQ • 0.40 MB
Download all tender documents and submit your bid