SPECIAL REPAIRS TO BLDG NO. TWG/302 OR LIVING 277 TRANSIT CAMP TYPE A (-) AND PROVN OF TILING IN BLDG NO. TWG-295 UNDER GE TAWANG

Amount

B and R Items Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed.

Dismantaling timber scantling 40 Sq cm as in unframed work and over in sec in any position complete all as specified and directed.

M&L second class hard wood clean swan timber framed work as in scantling complete all as specified and directed.

S&F second class hard wood plain, solid, straight chowkhats and frame, wrought, framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed complete all as specified and directed.

S&F 40 mm thick, flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both sides, complete all as specified and directed.

S&F 30mm th 2nd class hard wood glazed and skelton shutter open rebated and prepaid to receive glass gauze etc, divieded into squares (with sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for secuering glass etc size of members of shutter as specified in SSR part-I, sec 8 clause 8.24(a) complete all as specified and directed.

S&F 100 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed.

S&F 75 mm long butt hinges medium grade cold rollled mild steel and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts 125 mm of extruded section and fixed complete all as specified and directed.

S&F 125 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L 3 mm thick shet glass, ordinary quality and glazing with oil putty or wooden beads/PVC beads in square n exc 0.5 sqm in each pane complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any thickness, any gauge, thickness, including nainital or similar roof covering complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling of wall and celling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets in any thickness incl cover fillets complete all as specified and directed.

Dismantling boarding any description/ thickness fixed in any position with nails complete all as specified and as directed.

M&L second class hard wood clean sawan boarding, 50 mm thick, with butt joints ln any situation fixed with nails complete all as specified and as directed.

M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber framework in wall only complete all as specified and as directed.

M&L galvanized iron snap grid with powder coated section of size 24mmx38mmx0.7mm thick ‘T’ section and 25mmx25mmx0.35mm thick wall cleat of angle section and 4mm dia galvanized iron wire suspended with 4mm thick non AC board of Make : M/s EVEREST Industries Ltd of size 600mmx600mm and shall be fixed to galvanized iron snap grid of above section with mild steel screws as per manufacturer’s instructions including two coats of distemper oil emulsion over a coat of cement primer complete all as specified and as directed.

M&L for second class hard wood plain fillets, square, rectangular or triangular in section, wrought secured with nails of sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint over a coat of pink primer on wood/plywood surfaces, over 10cm width or girth complete all as specified and directed.

Demolition of concrete in ground floor and pavings nexc 15cm thickness including floor finishes like tiles if any of any description. (below or above ground level) complete all as specified and directed.

M&L for 75 mm 1:3:6 type C2 ( using 40 mm graded stone aggregate) as plinth protection./paving/footpath complete all as specified and directed.

M&L 25 mm thick PCC (1:2:4) type B-1 (20mm graded aggregate) as in sub base finishing the surface even and rough to receive the topping layer complete all as specified and directed.

M&L screed bed or bedding layer of mortar (1:4) 15 mm thick for laying floor finishers complete all as specified and directed.

M&L vitrified tiles light shade10mm thick (square /retangular) area of each tiles exc 0.36 sqm but n exc 0.42 sqm, in floors etc. Set and jointed in neat cement slurry and pointed in white or cloured cement to match complete all as specified and directed.

M&L prepolished coloured cement concrete chequered tiles premium qlty with glazed finished of size 300x300x25mm and jointed in neat cement slurry and pointed in colour cement to match the shade of the tiles as in paving/foot path etc as required complete as per manufacturer’s instructions complete all as specified and directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster in cement mortar (1:6) on unfair faces of brickworks complete all as specified and directed.

M&L preparation of new surface & applying two coats of cement based paints over a coat of cement primer on wall complete all as specified and directed.

S&F for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Demolition of precast concrete block/stone boulder walling built in C.M. complete all as specified and directed.

M&L for pre cast cement concrete block 1:3:6 type C1 (using 20mm graded stone agg) 10 cm thick or width and setting in CM 1:6 complete all as specified

M&L for walling of random rubble uncoursed,well bonded bedded and solidly hearted built in CM 1:6 including finishing the joints, flush as the work proceeds complete all as specified as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses not exceeding 40mm depression complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble, uncoursed or brought course masonry in cement Mortar 1:4 complete all as specified and as directed.

M&L for 1:2:4 type B1 (20mm graded stone aggregate) as in cills, coping, steps, seismic and other similar bands, plinth courses, string courses , lacing courses, parapets and railings up to 60cm in height , copings, kneelers, apex stones, bed plates, kerbs including weathering , slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and directed.

M&L for plain cement concrete (1:3:6) type C-1, using 20mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

M&L for formwork to faces of walls, retaining walls, abutments, parapets and stair case railing and similar work including attached pilaster, buttresses etc; vertical or to batter, curved faced with rough finished surfaces of concrete complete all as specified and directed.

M&L for extra for forming fair finishing to surfaces drain/channel 30 cm inner girth in cement concrete ,using extra cement incl forms, moulds etc complete all as specified and directed.

M&L for preparation of old painted surfaces and apply one coat of synthetic ennamel paint of steel surfaces of any description over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

E and M Works Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder,ceiling roses, regulators, switch socket outlet, bulk head fittings, tube light fittings etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Taking down carefully by unscrewing from board/outlet boxes, fittings and fixture such as main switches & DBs of any size and any capacity complete all as specified and directed

M&L for point wiring with 2 single core FRLS PVC insulated, unsheathed stranded copper conductor of size 1.5 sqmm in and including suitable size PVC casing & caping with teak wood boxes and 3mm thick plastic laminated sheet top cover for light/fan/socket controlled by one switch complet with 1.5 sqmm PVC insulated unsheathed multistandard copper conductor 1100 volts grade green colour for earth continuity complete all as specified and directed.

All as per item No 47 here-in-before but for one 5 Amp socket outlet independent board complete all as specified and directed

All as per item No 47 here-in-before but for one 5 Amp socket outlet on the same board complete all as specified and directed

All as per item Ser No 47 above but for one 15 Amp socket outlet independent with 2 run of cable of size 2.5 sq mm and one run of 4 sq mm cable as earth continuity complete all as specified and directed.

S&F switch piano flush type single pole one way 5 Amp 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination 2 in 1, 5 pin 5 Amps flush type 240 volts complete all as specified and directed.

Supply and fixing for switch socket combination multipurpose 15 A flush type, 5 in 1, 240 volts complete all as specified and directed.

S&F for ceiliing rose three terminal surface type bakelite 65x50 mm complete all as specified and directed.

S&F Surface and wall mounted LED batten 20 watt extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver with LED Lamp complete all as specified and directed. Make: Havels ENDURALINEARNEOBS20WLED840SPCWH & equivalent make specified.

S&F battern LED light fittings, 1x10W luminiaries with lamp holder, etc. Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. Make: Havels Cat Part No LED Adore LHLDERHEMD8X010 & equivalent make specified.

S&F Bldg security LED light fittings, 1x40W LED luminiaries Complete with all acessories and including connecting upwith twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ, 40mm light grade GI pipe with suitable clamps, nuts, bolts and all fitting accessories complete all as specified and directed. Make Havells Cat part No. ENDURAPEARLNEOSL40WLED757PASYTOPC & equivalent make specified.

S&F sheet metal enclosures for DBs (Double door type) when MCBs to be used 240 volts 08 way with 200 Amps rated bus bar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed.

S&F MCB SP, 240V, 6 to 32 Amps, 10 KA complete all as specified and directed.

S&F MCB SPN 240V, 40 Amps, 10 KA complete all as specified and directed.

S&F air termination, single pointed copper rod 12mm dia and 300mm long complete all as specified and directed.

S&F test terminal block made of gun metal or phosphourus beonze size 75x75x25mm, drilled and screwed including 3 Nos, 8mm dia 25mm long hex. head screw complete all as specified and directed.

S&F galvanised iron strip 32x6mm buried in ground with saddles and fixing screws etc complete all as specified and directed.

S&F XLPE insulated heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 2core X 10 SQMM along the wall/Earth complete all as specified and directed. (from LT panel to living sheltor Shed SPN DB as incoming).

Excavation in trenches not exceeding 1.5m in width and 1.5m depth for laying LT Cable and getting out in Hard/densesoil rock complete all as specified and directed.

Returning filling including spreading , leveling ,watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated surplus soil not exceeding 50m and depositing where directed at a level not exc 1.5m above the starting points in soil complete all as specified and directed.

M&L for sand filling under floors in foundations & in trenches including watering and consolidation complete all as specified and directed.

M&L for reinforced precast concrete cable cover, class LV Type 1, flat size 250mmx150mmx40mm. Complete all as specified and directed.

M&L for tubes 'Light grade" galvanised 40mm for cable protection. complete all as specified and directed.

M&L in replacement of circuit/submain wiring alongwith earth wire with the size of 2 X 4 Sqmm + 1 X 2.5 Sqmm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/recessed as required in and including PVC casing caping complete fixing on wall, roof and floor complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6.0 mm thick buried directly in ground end vertically to a depth not less than 2.25 meter deep below ground level with top edge of the earth plate at a depth not less than 1.5 M below normal ground level connected to galvanized iron strip 32x6mm as earthing lead by means of bolts, nuts check nuts and washers of galvanized steel and connected to main switch board or main control board as directed and provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1, cover slab 54 cm x 54 cm x 5 cm, reinforced with 8 mm dia TMT bars @ 150 mm c/c both ways, one handle for lifting made out of 10 mm dia MS round bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing (light grade) for protection of earth lead connection, including necessary excavation and earth work in any type of soil, dismantling and taking out old earthing plate and necessary testing complete all as shown on electrical plate No 5 of SSR Part –I (2009) complete all as specified and directed.

M/S GLOBAL ROYAL CONSTRUCTION

M/S GOLANG CONSTRUCTION CO.

M/S KESANG CONSTRUCTION

M/S MONYUL ENTERPRISES

M/S P N ASSOCIATES

M/S RINCHIN DORJEE CONSTRUCTION

M/S TSERING DHONDUP