Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
6 Apr 2026, 3:00 pmClosed
Single Packet System
Not Applicable
60 days
Expenditure
Capital (Works)
S AND T
SC Div: Telecom Infrastructure Upgradation and Enhancement Works over SC Division. 1)Telecom proposal for Strengthening of Railnet equipment and network infrastructure for improving bandwidth and running of IT based application(e Office,ORMS,IPAS,IRWCMS,IREPS,IRPSM,HRMS,SMMS,Points ang Crossing Inspections App etc) over SC division.2) Bifurcation of data logger system (Servers, CMU's, FEP) & Provision of Multi monitor display for all control boards of over SC division.3) Renovation of signal control room at SC division.4) Signal & Telecom Proposal for Amrit Bharat stations (VKB & TDU) for completion of phase - I under Sr.DEN/West/SC jurisdiction. 5) VKB-PRLI Section: Telecom arrangements in connection with Proposed construction of RUBs near LC 71 at Km 137/3-4. 6) VKB-PRLI Section: Telecom arrangements in connection with Proposed construction of RUBs near LC 9 at Km15/7-8. 7) Telecom arrangements for creation of additional Trip Inspection facilities at TS/HYB under UW 2023-24. 8) VKB-WD section: Telecom arrangements in connection with proposed construction of RUB near LC 9 at KM 55/12-14. 9) Telecom proposal for provision of two way mics at the nominated Divyang counters at the NSG-1 to NSG-5 category 41 stations over SCDivisionHYB,LPI,KZJ,WL,BMT,KMT,BIDR,MCI,CHZ,PRLI,VKB,TDU,MABD,BDCR,RDM,SKZR,SEM,PDPL,UDGR,YADD,ALER,BPA,BHLK,BG,CT,DKJ,GT,GNP,JMKT,ZN,KRMR,KDM,LTRR,MDR,MUGR,MLY,NKD,SNF,SKP & ZB.) 10) Telecom Proposal for Provision of divyangjan amenities (Water taps, Divyangjan toilets, Accessible route with tactile guidance, Platform Zoning, Contrasting colour scheme for structural elements & Platform edge Strips) to meet short term targets in Sr.DEN/West section. 11) Signalling arrangement in connection with proposed replacement of LC with RCC box (RUB) at LC No. 09 (SC-WD section) at Km No. 55/12-14.
C_SG_36_596
C_SG_36_596
Open
12 Months
Hyderabad, Telangana
6 Apr 2026
13 Mar 2026
194 items across 4 schedules · ₹6,54,20,272.4 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Supply of Permanently lubricated HDPE Duct with outer diameter of 40mm and inner diameter of 33mm as per specification RDSO/SPN/TC/45/2013 Revision 2.0. The length of the duct shall be 1km. Two end plugs shall be provided along with the drum. (TO BE INSPECTED BY RDSO/RITES) | Kilometre | 64.00 | 66,223 | 42,38,272 | |
| 2 | Supply of Plastic couplers - Slip fit / push type for permanently lubricated HDPE duct. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 500.00 | 85 | 42,500 |
| 3 | Supply of network 8 port switch with Ethernet and SFP port rj 45 network interface, product, D- link or similar.Should support 1000Mbps on both optical/Electrical ports. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 102.00 | 2,300 | 2,34,600 |
| 4 | Supply of GKP type Location Boxes (a) Full size as perdrg. No. S&T/MFT/T.2378 (TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 16,216 | 1,62,160 |
| 5 | Supply of 'E'type lock of specified ward as per requirement with one key E-type lock to DRG. No.SA3376/M or latest and specification IRS: S30-64 or latest (TO BE INSPECTED BY RDSO) | Numbers | 10.00 | 1,051 | 10,510 |
| 6 | Supply of following type of Terminal block of Wago Make or Similar (with lever type disconnection & reconnection facility) duly fitted in C.T. box of approved quality, suitable for termination of cable from 0.4mm to 0.9mm conductor. 24 pair (TO BE INSPECTED BY CONSIGNEE) | Numbers | 4.00 | 3,240 | 12,960 |
| 7 | Supply of Push button corded auto telephone with Caller ID facility of a) Volume control, b )Incoming & outgoing call memory, c) music on hold, d) selectable ringer melodies. Make : BEETEL, Model : M77/ BPL/ PANASONIC or similar (TO BE INSPECTED BY CONSIGNEE) | Numbers | 5.00 | 1,495 | 7,475 |
| 8 | Supply of Ethernet to E1 Converter (Ethernet port to G.703) with four Ethernet ports t o one E1. The converter shall have the provision o f dual A C / D C power supply. (TO BE INSPECTED BY RITES) | Numbers | 4.00 | 47,074 | 1,88,296 |
| 9 | Supply of Switch board cable 5 Pair /0.6mm dia. as per TEC 68080:2002or latest. (TO BE INSPECTED BY CONSIGNEE) | Kilometre | 1.00 | 17,649 | 17,649 |
| 10 | Supply of Switch board cable 20 Pair / 0.6mm dia. as per lEO68080:2002 or latest GR WIR 0603 March 2002 or Latest (TO BE INSPECTED BY CONSIGNEE) | Metre | 1500.00 | 88 | 1,32,000 |
| 11 | Supply of Calling On Signal Unit complete with U Bolts as per RDSO DRG. No. SA.24351 (Adv.) or latest. (TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 4,740 | 47,400 |
| 12 | Supply of Thermo shrink jointing kitforjointing underground 0.9mm dia conductor 6 quad cable as per specification IRS: TC 77-2012 Rev. 3 (Amd. ito Amd. 3) or latest. (TO BE INSPECTED BY RDSO) | Numbers | 2.00 | 3,715 | 7,430 |
| 13 | "Supply of VF Transformer 2T assembly of type 2 with impedance ratio 470: 1120 ohms as per specification IRS: TO 76 -2000 with Amd. 1 or latest." (TO BE INSPECTED BY RITES) | Numbers | 20.00 | 999 | 19,980 |
| 14 | Supply of OFC integrated access with following specifications: The device shall be of 1U or 1.5U height and shall be mountable in 19" rack The device's optical module shall be integrated in the unit and shall support dual core OFC. The device shall have four 100 Mbps Ethernet ports for surveillance / smoke detectors. The device shall support an optical distance of up to 40km. The device shall support six 2 Wire / 4 Wire ports (each port shall b e configurable) t o support axle counter / UFSBI / control phone / EC / RTU applications, one TELNET / SNMP port, two RS232 ports and four potential free contacts. The device shall support dual DC power supply from 18V DC to 72V DC. The device shall support auto changeover feature on E&M interfaces from copper (quad cable) t o optic medium (OFC) and vice versa. The device shall have programmable option as required for each port. (TO BE INSPECTED BY RITES) | Numbers | 3.00 | 2,40,421 | 7,21,263 |
| 15 | Supply of Universal Locks with one steel key for every ten locks or part there of (For example, if locks ordered is 10, 1 key is to be supplied and if locks ordered is 20, 2 keys to be supplied. However, 2 keys to be supplied if locks ordered is between 11 and 19).( To be inspected by Consignee) | Numbers | 10.00 | 195 | 1,950 |
| 16 | Supply of relay fixing frame for full location box. The frame shall be of approximate size 940mmx150mm and made with powder coated MS angle of 25mmx25mmx 3mm. The frame shall have suitable holes to fix in full location box.( TO BE INSPECTED BY CONSIGNEE) | Numbers | 10.00 | 853 | 8,530 |
| 17 | Supply of relay fixing frame for half location box. The frame should be of approximate size 470mmx150mm and made out with powder coated MS angle of 25mmx25mmx3mm. The frame should have suitable holes to fix in half location box. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 2.00 | 427 | 854 |
| 18 | Supply of PVC insulated wire coils Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.5sq.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge.( Item unit is Coil)( To be inspected by RDSO) | Numbers | 20.00 | 1,153 | 23,060 |
| 19 | Supply of PVC insulated wire coils, Multi-strand, single core, copper conductor 28/0.3 (28 wires, diameter of each wire 0.30mm) flexible wire coil as per specifications IS 694:2010 or latest, IRS: S 76-89 Amd. 3 or latest. Length of coil should be 100m. Colour to be specified by Engineer in charge.(Item unit is Coil ) ( To be inspected by RDSO) | Numbers | 6.00 | 2,903 | 17,418 |
| 20 | Supply of non-deteriorating type of fuse holders and fuse links 240V AC/DC as per specification IRS: S 78-2006 or latest, IS 13703 (Part 2):1993 knife edge type fuse of E1 fuse link type (up to 20A) Fuse holder 20A capacity ( To be inspected by RDSO) | Numbers | 20.00 | 220 | 4,400 |
| 21 | Supply of Fuse link 1A / 2A / 6A / 10A / 16A / 20A as specified by Engineer In charge. (TO BE INSPECTED BY RDSO) | Numbers | 60.00 | 31 | 1,860 |
| 22 | Supply of Terminal block: 1 way Poly butylene Terephthalate (PBT) of size 60mm (link centre to centre) as per RDSO DRG. No. SA23745/Alt.5 or latest, SA23746/Alt.5 or latest, S23747/Alt.5 and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. (TO BE INSPECTED BY RDSO) | Numbers | 20.00 | 97 | 1,940 |
| 23 | Supply of Terminal block: 6 way Poly butylene Terephthalate (PBT) of size 25mm (link centre to centre) as per RDSO DRG. No. SA23756/Alt.3 or latest, S23757/Alt.4 or latest and specifications IRS: S 75-2006 Rev. 2.0 (Tentative) or latest, IRS: S 23-88 Amd. 1 or latest. (TO BE INSPECTED BY RDSO) | Numbers | 20.00 | 406 | 8,120 |
| 24 | "Supply of modular terminal block (WAGO or similar) as per RDSO specification RDSO/SPN/189/2004 Ver. 3.0 or latest consisting the following parts: a) 2 conductor disconnect terminal block - 6 numbers b) End / intermediate plate suitable for 2 conductor disconnect terminal - 1 number c) Screw less end stop similar to WAGO Model No. 249-117 -2 numbers d) Insulated jumper WAGO Model 280-402 - 5 numbers e) Din Rail - 0.1 metre per set (in length of 1 metre for every ten set) (TO BE INSPECTED BY CONSIGNEE) | Set | 100.00 | 703 | 70,300 |
| 25 | Supply of mini WSB markers for modular terminals WAGO Model No. or similar - 100 Nos.(TO BE INSPECTED BY CONSIGNEE) | Set | 10.00 | 64 | 640 |
| 26 | "Supply of Digital multimeter Specifications: digital TRMS 5 Digit 60000 counts with following features Frequency range: 6Hz to 1MHz Frequency mv AC band width: 100KHz AC voltage rage: 1mV-1000V, +/- 0.5% DC voltage rage: 1uV-1000V, +/- 0.05% AC current rage: 1uA-10A, +/- 0.5% DC current rage: 1nA-10A, +/- 0.2% Capacitance range: 1pF-10000uF Datalogging: 32000 Readings Dual display: Available Other features: Temparature messurement, Diode, continuty, Duly cycle measurement, self battery voltage measurement, Low pass filter, Min, Max and Average value recording, Back light, Bargraph, Protective rubber holster. Model no: Rishabh 6016 or Similar"( To be inspected by consignee) | Numbers | 2.00 | 15,157 | 30,314 |
| 27 | Supply of ECR 4F/4B' for 110V AC lit LED signals, complete with plug board, retaining clip and connectors as per RDSO specification No.STS/E/Relays/AC Lit LED Signal/09-2002 Amd. 1 or latest, BRS 941A, IRS: S 23-88 Amd. 1 or latest, IRS: S34-68 Amd. 6 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). The interlocking code for this unit shall be ABDHK (with ATC clips). ( TO BE INSPECTED BY RDSO) | Numbers | 10.00 | 5,841 | 58,410 |
| 28 | Supply of AC immunized plug-in-type Style QSPA1- 8F/4B, The interlocking code: ABDEJ, Spec BRS 933A or latest 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable).(TO BE INSPECTED BY RDSO) | Numbers | 10.00 | 6,465 | 64,650 |
| 29 | Supply of AC immunized plug-in-type Style QNA1K-6F/6B, Interlocking Code: CDEKY as per Spec BRS 931 A or Latest and RDSO letter No.STS/E/Relays/ UEA (PI) dated 30/05/97 (Annexure-II)., 24 V DC plug-in type miniature tractive armature, AC immune relay complete with plug board, retaining clip/ATC Clip and connectors as per IRS: S 23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest, IRS: S 60-78 Amd. 1 or latest, IRS: S 67-85 Amd. 3 or latest (as applicable). (TO BE INSPECTED BY RDSO) | Numbers | 10.00 | 5,062 | 50,620 |
| 30 | Supply of Fail-Safe Electronic Time Delay Device Time delay of 120 seconds. Interlocking code: AFGKY. mounted on Q series relay band enclosed within Q series relay cover complete with plug board, retaining clip and connectors as per specifications IRS: 61-2000 Amd. 3 or latest, IRS: S23-88 Amd. 1 or latest, IRS: S 34-68 Amd. 6 or latest IRS 67-85 (as applicable). The device shall work on 24V DC and shall give 24V DC output after the specified time delay.(TO BE INSPECTED BY RDSO) | Numbers | 10.00 | 5,332 | 53,320 |
| 31 | "Supply of Tool Kit as under - 1. Standard Tool Bag (CANAVAS) - 1 No. 2. Soldering Iron (Make Soldern / Philips) - 60W / 230V -1 No. 3. Digital Multimeter - True RMS Meter (Philips / Fluke / Rishabh Rish 18S IR) Upto 20M, 10A, 5kHz, 2mV to 750V AC, 200V DC - 1 No. 4. Screw Driver set of 6 pieces (Taparia Make) - 1 No. 5. Cutting plier 6" (Taparia Make) - 1 No. 6. Side Cutter (Wire cutter) 6" (Taparia Make) - 1 No. 7. Nose plier 6" (Taparia Make) - 1 No. 8. Wire stripper (Taparia Make) - 1 No. 9. Fiber tape 3m length - 1 No. 10. Scale 6" (for measuring tongue rail opening) - 1 No. (Transparent Plastic Material) 11. Pop spanner wrench 6mm to 22mm (Auto adjustable spanner) of Taparia make - 1 No. 12. Pop spanner wrench 10 mm to 30 mm (Auto adjustable spanner) of Taparia make - 1 No. 13. Pop spanner wrench 15mm to 41mm (Auto adjustable spanner) of Taparia make - 1 No. "14. Hacksaw frame with blade 6"", 4" width (for cutting cable) - 1 No. 15. Hammer 3.0 lb - 1 No. 16. Chisel 6" (for cutting bond wire) - 1 No. 17. Poker 8" (for removing bond wire, bond pin) - 1 No. 18. Heavy duty Screw Driver 12" with plastic handle (Taparia Make) - 1 No. 19. Test piece (Point wedge piece) - 1 No. 20. Multi colour rechargeable LED torch light - 1 No. 21.Universal key - 1 No. 22. Box spanner for 6 way terminals (13mm) - 1 No. 23. Nylon brush (for cleaning purpose) - 1 No. 24. Sealing plier - 1 No. 25. Crimping Tool (1.5 to 16sq.mm) - 1 No. 26. Feeler gauge - 1 Set 27. TSR Meter (for testing condition of track circuit) - 1No. 28. Wooden Block (60mm x 60mm) - 1 No. 29. Track shorting clips - 1 No. 30. Tester - 1 No. 31. Flat file 12" length x 1" width - 1 No. 32. Clip on meter - 1 No. 33. Digital Earth meter - 1 No. 34. Meggar - 1 No. ( TO BE INSPECTED BY CONSIGNEE) | Numbers | 1.00 | 46,332 | 46,332 |
| Schedule total | ₹62,85,213 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDocumentT.No.596.pdf
ATTACHMENT
MAKEININDIA2.pdf
ATTACHMENT
DRAWINGS.pdf
ATTACHMENT
GCC_April-2022__1.pdf
ATTACHMENT
Tele_Cir_9-2023.pdf
ATTACHMENT
MAKEININDIA1_compressed1.pdf
ATTACHMENT
Correctionslips.pdf
ATTACHMENT
ListofAnnexures.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].