Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.4 LAccepted-AOC SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹24.4 L+₹1.4 L (6.10%)Rejected-Finance B 101 SURAJ TOWER MIRA BHAYANDER ROAD OPP SAI PETROL PUMP MIRA ROAD EAST THANE 401107 | MIRA ROAD EAST | THANE | MAHARASHTRA | 401107 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹27.2 L+₹4.3 L (18.5%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹60,000
Closing Date
11 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
RAJESH KUMAR IDSE
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN396210
REPAIR AND MAINTENANCE OF WATER SUPPLY PUMP SETS CONTROL PANELS WATER FILTERATION PLANT CHLORINE DOZING PLANTS RO PLANTS INCLUDING REPLACEMENT OF OLD UNSERVICEABLE CI GI DI PIPE LINES ETC AT TRV AREA AND REPAIR AND MAINTENANCE TO SWIMMING POOL IN
2024_MES_636312_2
8748/E8
Open Tender
Civil Works
Works
330 days
Garrison Engineer Daman, Tat RakshakVihar, Dalwada
Class D category b(i)
9 documents required · 9 mandatory
₹500
Yes
Garrison Engineer Daman
₹60,000
1 Jul 2024
12 Feb 2024
13 Mar 2024
12 Feb 2024
11 Mar 2024
26 Feb 2024
Amount
M & L for detecting water leakage/blockages in underground water pipe lines, turning off/On water and draining the system as required, with necessary excavation at location of leakage/blockage and carrying out repair of GI/CI/DI/HDPE pipe of any size with tightening of loose connection, removing & cleaning blockage, replacement of u/s fittings & repair/replacement of joints, all as specified and direted by Engineer In Charge Note: 1. Excavation & Earthwork, Additional Pipe, Joint and jointing material shall be included in the quoted rate. 2. GI / CI/DI/HDPE fittings such as bends, elbows, tees, reducers, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc of any size shall be included in the quoted rates.
Supply and fix galvanised steel tubing of size 50 mm dia "heavy grade" and the pipe shall be 6 mtr length piece for lowering in borewell and carryout machine threading and including providing 100 mm long GI heavy grade socket for each of the joint and tightening , including removing old unserviceable pipes and fitting , complete all as specified and directed. . Make :- Jindal / Tata / Surya prakash
Supplying , Laying and testing galvanised steel tubing of size 50 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc and laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed . Make :- Jindal / Tata / Surya prakash
Supplying , Laying and testing galvanised steel tubing of size 40 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc. laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed . Make :- Jindal / Tata / Surya prakash
Supplying , Laying and testing galvanised steel tubing of size 25 mm dia "medium grade" in any lengths with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc and shall be laid in trenches / on wall /floor / road cross etc and including removing/taking down of old unserviceable pipes and fittings , complete all as specified and directed Make :- Jindal / Tata / Surya prakash
Cutting exissting Galvanised iron pipes of 40mm or 50mm dia and screwing existing steel tubing for alterations or additions complete all as specified and directed.
Cutting of existing cast iron pipes 80 mm dia for taking up branch connections for insertion of new tees, branches etc complete all as specified and directed
Cutting of existing cast iron pipes 100 mm dia for taking up branch connections for insertion of new tees, branches etc complete all as specified and directed
Cutting of existing cast iron pipes 150 mm dia for taking up branch connections for insertion of new tees, branches etc complete all as specified and directed
Supply, Laying, jointing and testing cast iron pipe , 80 mm dia with spigot and socket ends (suitable for Run lead joints/ tyton joints/ push on type rubber joint ) , centrifugally cast , class LA , in any length as per site requirement, laid in trenches/on walls / on floor / in UG sumps / over head resevoirs etc the pipe shall be connected and jointing to existing pipe line by using necessary flange joints, rubber packing, nuts, bolts & washers etc including dismantling and taking out existing old unserviceable pipes ,complete all as specified and directed Make:- Electrosteel/Jindal /Tata Note :-(i) Excavation / Returning filling and removal of soil / bituminous cutting / PCC cutting etc shall be measured and paid separately. (ii) Run lead joints/ tyton joints/ push on type rubber joint shall be measured and paid seperately.
Supply, Laying, jointing and testing cast iron pipe , 100 mm dia with spigot and socket ends (suitable for Run lead joints/ tyton joints/ push on type rubber joint ) , centrifugally cast , class LA , in any length as per site requirement, laid in trenches/on walls / on floor / in UG sumps / over head resevoirs etc the pipe shall be connected and jointing to existing pipe line by using necessary flange joints, rubber packing, nuts, bolts & washers etc including dismantling and taking out existing old unserviceable pipes ,complete all as specified and directed Make:- Electrosteel/Jindal /Tata Note :-(i) Excavation / Returning filling and removal of soil / bituminous cutting / PCC cutting etc shall be measured and paid separately. (ii) Run lead joints/ tyton joints/ push on type rubber joint shall be measured and paid seperately.
Supply, Laying, jointing and testing cast iron pipe , 150 mm dia with spigot and socket ends (suitable for Run lead joints/ tyton joints/ push on type rubber joint ) , centrifugally cast , class LA , in any length as per site requirement, laid in trenches/on walls / on floor / in UG sumps / over head resevoirs etc the pipe shall be connected and jointing to existing pipe line by using necessary flange joints, rubber packing, nuts, bolts & washers etc including dismantling and taking out existing old unserviceable pipes ,complete all as specified and directed Make:- Electrosteel/Jindal /Tata Note :-(i) Excavation / Returning filling and removal of soil / bituminous cutting / PCC cutting etc shall be measured and paid separately. (ii) Run lead joints/ tyton joints/ push on type rubber joint shall be measured and paid seperately.
Material and Labour for CI fittings such as bends (any type, radius and angle) tapers any type(straight, bends, increasing, decresing or double socket etc), Tee pieces single branch, 'Y' junction, double branch, cross collars, caps and plugs suitable for spigot and socket pipes or flanged end pipes of size up to 150 mm bore and testing including removing old unserviceable item complete all as specified and directed. Make :- Electrosteel/Jindal /Tata/Updahyay/Venus
Supply and fix foot valve of size 80 mm dia, cast iron body of gun metal working parts complete with all flanges, packing, nuts, bolts and washers etc and shall be fixed in under groundsumps and testing including removing the existing old unserviceable valve, complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supply,fixing, jointing and testing CI sluice valve 80mm bore ,both end flanged, long body, class PN-1, conforming to IS 14846-2000, duly ISI marked, with iron wheel and brass spindle and fly nut, bolts, washers and rubber gasket, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supply,fixing , jointing and testing CI sluice valve 100 mm bore ,both end flanged, long body, class PN-1, conforming to IS 14846-2000, duly ISI marked, with iron wheel and brass spindle and fly nut, bolts, washers and rubber gasket, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supply, fixing , jointing and testing ,CI sluice valve 150 mm bore ,both end flanged, long body, class PN-1, conforming to IS 14846-2000, duly ISI marked, with iron wheel and brass spindle and fly nut, bolts, washers and rubber gasket, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supply, fixing, jointing and testing, non return valve 50 mm dia , gun metal body, screwed ends, suitable for GI pipe or fittings and testing including removing old unserviceable item complete all as specified and directed. Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supplying and fixing Non return valve 80 mm bore, high pressure ,CI body, flanged ends, ball control conforming to IS 5312-2004, duly ISI marked, fixed in repairs, complete all as specified and directed . Make:- KIRLOSKER / LEADER /BIR / VENUS.
Supplying and fixing Non return valve 100 mm bore, high pressure ,CI body, flanged ends, ball control conforming to IS 5312-2004, duly ISI marked, fixed in repairs, complete all as specified and directed . Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 50 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 40 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out the unserviceable gate valve of any type and supply and fix gun metal gate valve of size 25 mm dia with iron wheel head screwed both ends suitable for iron pipes/fittings complete all as specified and directed Make:- KIRLOSKER / LEADER /BIR / VENUS.
Taking out unserviceable submersible pump set 3 phase, 415 volts, 50 Hz of any capacity/type/make including vertical column GI pipes of any size alongwith submersible cable from existing borewell at any depth and kept in safe custody for reinstallation after repairs and including lowering the submersible pump set into the borewell duly reconnecting and jointing of new or taken out vertical column GI pipes of any length along with new or taken out submersible cable by providing water proof jointing complete carefully by using necessary chain pulley /T&P / tripod etc complete all as specified and directed. Note :- (i) New column GI pipes and submersible cable will be measured and paid separately as Supply only
Dismantling the submersible pump set of capacity 7.5 to 10 HP, 3 Phase, 415V, 50Hz of any type/make and carrying out servicing, overhauling, greasing and examine carefully ,repairs and replacement of minor spare parts such as pump shaft key, rotor key, sand guard, pump fixing stud, oil seal, neck ring, guide vane, adopter bearing bush, suction strainer, nuts, bolts and washers etc and including replacement of spares Viz: Counter thrust bearing , thrust bearing with CI housing , pump sleeves , motorbearing bush , impeller radial flow of stain less , impeller mix flow SS , revolving plate , cable etc. and assembling and refixing of pump and motor , including painting to pump and motor with two coats of anti corrosive paint over a coat of red oxide primer after preparation of surfaces . Testing after repair , complete all as specified and directed. Note :- (i) Counter thrust bearing , thrust bearing with CI housing , pump sleeves , motorbearing bush , impeller radial flow of stain less , impeller mix flow SS , revolving plate , cable if required shall be measured and paid separately as "supply only" (ii) The rate quoted by contractor shall deemed to be included of all replacement of minor spare parts other than supply only. (iii) The cost of transport to civil trade shop for repairs is deemed to be included in rate quoted by the contractor (iv) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor
Supply only counter thrust bearing suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed
Supply only thrust bearing with CI housing suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed
Supply only pump sleeves suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed.
Supply only motor bearing bush suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed.
Supply impeller radial flow stainless steel suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed.
Supply only impeller mix flow stainless steel suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed.
Supply revolving plate suitable for submersible pump sets of capacity 7.5 to 10 HP complete all as specified and directed.
Dismantling the pump set of capacity 30 HP, 3 phase, 415 volts, 50 Hz of any type/make and carrying out servicing, overhauling, greasing and examine carefully , repairs and replacement of minor spare parts such as gaskets of any type, gland rope, shaft key,terminal board, mechanical seal, shaft sleeve, gland plate, nuts, bolts and washers and including replacement of spares Viz: copuling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stailess steel shaft, external fan, delivery flange, suction flange, bearing housing and ressembling, including painting to pump set and base frame with two coat of synthetic enamel paint of existing colour after preparation of surfaces to achieve smooth finish including reconnecting of pipes and electric connection to existing system and testing complete all as specified and directed. Note :- (i) copuling set with rubber bush, gun metal impeller, ball bearing (D.E), ball bearing (N.D.E), stailess steel shaft, external fan, delivery flange, suction flange, bearing housing, if required shall be measured and paid separately as supply only (ii) The rate quoted by contractor shall deemed to be included of all replacement of minor spare parts other than supply only. . (iii) The cost of transport to civil trade shop for repairs ideemed to be included in rate quoted by the contractor . (iv) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor .
Supply only coupling set with rubber bush for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Gun metal impeller for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Ball bearing (D.E) for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Ball bearing ( N.D.E) for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Stainless steel shaft for centrifugal pump set 30 HP complete all as specified and directed.
Supply only External fan for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Delivery flange for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Suction flange for centrifugal pump set 30 HP complete all as specified and directed.
Supply only Bearing housing for centrifugal pump set 30 HP complete all as specified and directed.
Material and Labour for rewinding of submersible motor of capacity of 7.5 HP to 10 HP, 3 phase, 415 volts, AC of any type/make with copper winding wire with polywrap of existing gauge and Nos of turns including removing old burnt out winding carefully without damaging to other parts and testing complete all as specified and directed.
Material and Labour for rewinding of centrifugal motor of capacity of 30 HP, 3 phase, 415 volts of any type/make with super enamelled copper winding wire of existing gauge and number of turns including removing old burnt out winding carefully without damaging to other parts and testing complete all as specified and directed Note for item No's 43 to 44 :- The cost of transport to civil trade shop for rewinding is deemed to be included in rate quoted by the contractor
Repairs to calcium based granular dozing unit alongwith booster motor of any make / type duly renewal of components and accessories such as discharge valve, suction valve, diapharm including rewinding of 0.5 HP motor, 3 phase, 415 volts, 50 Hz with super enamelled copper wire of appropriate gauge and reassembling the pump set and dozing unit and testing complete all as specified and directed.
Flushing of bore well of 150 mm dia up to required depth with the compressed air system as followed in digging new bore well equipment system continuously to remove complete loose soil, silt / sludge etc till getting the clear water complete all as specified and directed. Note:- The cost for taking up and lowering of submersible pump set from borewell with vertical column pipes is not included in above item and same will be measured under item No 01.
Removing of old unserviceable DOL starter from existing position after disconnecting of electric connection and supply and fix new DOL starter single phase, 230 volts, 50 Hz suitable for 1HP to 3HP pump set complete with inbuilt accessories such as contactor, relay etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing of old unserviceable DOL starter from existing position after disconnecting of electric connection and supply and fix new DOL starter three phase, 415 volts, 50 Hz suitable for 1HP to 3HP pumpset complete with inbuilt accessories such as contactor, relay, timer etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing of old unserviceable DOL starter from existing position after disconnecting of electric connection and supply and fix new DOL starter three phase, 415 volts, 50 Hz suitable for 7.5 HP pumpset complete with inbuilt accessories such as contactor, relay etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing old unserviceable Star-delta starter from existing position after disconnecting of electric connection and supply and fix new fully automatic star delta starter three phase, 415 volts, 50 Hz suitable for 7.5 to10 HP pumpset complete with inbuilt accessories such as contactor, relay, timer etc and fully prewired in sheet steel enclosure and connecting to the existing system including testing complete all as specified and directed. Make :- L&T/Siemens/Crompton
Removing the unserviceable single phasing preventor after disconnecting of electric connection and supply and fix new single phasing preventor 415V, AC, 50Hz suitable for pumpset 7.5 to 30 HP and reconnecting of electric cables and testing complete all as specified and directed Make : Minilec / L&T / Siemens
Supply and Fix LED phase indicating lamp R-Y-B colour as required at site complete with base holder suitable for AC, 240 volts and testing including removing of old unserviceable lamps complete all as specified and directed. Make : Minilec / L&T / Siemens/AE
Supply and Fix digital type voltmeter 0-500 volts range, flush type, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing of unserviceable voltmeter complete all as specified and directed. Make : Minilec / L&T / Siemens /AE
Supply and Fix digital type ammeter 0-50 Amps range,flush type with appropriate CTs, AC, 50Hz in existing panel boards after disconnecting of cables and testing including removing unserviceable item complete all as specified and directed Make :- AE / L&T / Secure / Enercon
Supply only submersible cable 3 core , 4 sqmm copper conductor multistranded,1100 volts grade, flat type, PVC insulated, sheathed and testing ,complete all as specified and directed. Make :- Finolex / Plaza / Polycab / Havells
Supply only submersible cable 3 core, 6 sqmm copper conductor multistranded,1100 volts grade, flat type, PVC insulated, sheathed and testing complete all as specified and directed. Make :- Finolex / Plaza / Polycab / Havells
Material and Labour for construction of brick masonary valve chamber 900 x 900 x 900 mm (internal dimensions), 15 cm thick foundation by using PCC 1:4:8 (type D2), brick work in cement mortor 1:6,10 mm thick plaster internally and 15 mm thick externally in CM 1:4 above ground level, 6 mm thick MS sheet cover with hinges, with hold fasts and locking arrangement fixed to angle iron frame made out of 40mmX40mmX6mm complete with two coat of synthetic enamel paint over one coat of red oxide primer on all metal works and two coat of white wash on all plastered surfaces of valve chamber including excavation, earth work in any strata including disposal of surplus soil to a distance of not exc 50 mtr complete all as specified and directed
Material and Labour for construction of brick masonary valve chamber 1200 x 1200 x 900 mm (internal dimensions), 15 cm thick foundation by using PCC 1:4:8 (type D2), brick work in cement mortor 1:6,10 mm thick plaster internally and 15 mm thick externally in CM 1:4 above ground level, 6 mm thick MS sheet cover with hinges, with hold fasts and locking arrangement fixed to angle iron frame made out of 40mmX40mmX6mm complete with two coat of synthetic enamel paint over one coat of red oxide primer on all metal works and two coat of white wash on all plastered surfaces of valve chamber including excavation, earth work in any strata including disposal of surplus soil to a distance of not exc 50 mtr complete all as specified and directed
Material and Labour for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below ground level, connected to and including galvanised iron strip of size 25 x 4 mm from earth electrode to test point or up to 7.5 mtrs whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade, GI funnel with wire mesh including char coal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, RCC cover 1:2:4 type B1, excavation, earth work in any strata and returning filling, removal of surplus soil and testing for required value complete all as specified and directed
Cutting of existing bituminous surface/PCC hard standing by using mechanical method of any type for laying of cables/GI protection pipe and making good of disturbed surfaces to match with adjoining surface complete all as specified and directed Note:-PCC for making good shall be measured and paid separately)
M & L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate for making good of disturbed surfaces and for mass concrete including necessary use and waste of form work complete all as specified and directed
Material and Labour for for PCC 1:3:6, type C2 (40 mm graded stone aggregate) as in foundations / making good of disturbed surfaces / filling mass concrete complete all as specified and directed
M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 80 mm bore dia of CI/DI pipe.
M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 100 mm bore dia of CI/DI pipe.
M & L for mechanical type joint made of MS sheet of size 6/8 mm thick along with rubber gasket nuts bolts and washers suitable for 150 mm bore dia of CI/DI pipe.
Material and Labour for push-on- tyton joint (rubber ring) of EPDM material of ISI marked suitable for cast iron pipe of 80 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex or equivalent as approved by GE
Material and Labour for push-on tyton joint (rubber ring) of EPDM material of ISI marked suitable for cast iron pipe of 100 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex or equivalent as approved by GE
Material and Labour for push-on- tyton joint (rubber ring) of EPDM material of ISI marked for jointing of cast iron pipe of 150 mm dia and testing complete all as specified and directed. Make :- Isha Elestomer/Sandhyaflex or equivalent as approved by GE
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for laying water main pipe/ cables etc., getting out and forming bottom surface to required gradient, complete all as specified and as directed .
Returning, filling in, of soft/ loose soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each complete, all as specified and as directed .
Removing excavated materials not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point in soils, complete all as specified and as directed .
Supply and fix in repair MCCB 100 Amps, 4pole,16KA, 415 volts and cable connections , complete all as specified and directed. Make :- L&T / Havells / Schneider
Supply and fixin repair MCCB 63 Amps, FP, 16KA, 415 volts and cable connections ,complete all as specified and directed. Make :- L&T / Havells / Schneider
Supply and fix in repair MCB SP 6-32 Amps,10KA,'C' series, 240 volts and , complete all as specified and directed. Make :- L&T / Havells / Schneider
Supply and fix in repair MCBs , TPN 63 Amps,10 KA ,'C' series, 415 volts , complete all as specified and directed. Make :- L&T / Havells / Schneider
Material and labour for fabrication of duct cover made out of mild steel chequered plate of 7mm thick with provision of lifting handles, fire points, ladders, pipe supports and bracings etc made out from mild steel angle iron, channel, flat iron of suitable sizes including and welding as per site requirement and carry out two coat of synthetic enamel paint of red colour to fire points and grey colour to ladder, supports,duct cover etc over a red oxide primer including removing old rusted unserviceable items complete all as specified and directed.
Taking down water level indicator mechanical type and supply and fixing in repair accessories viz PVC float not less than 40mm dia heavy duty, 7/0 SWG steel wire stranded of 4 mtr length, bracket (made up of MS iron size 40x40x6mm and 60 cm long), pulley of suitable size of mild steel, mild steel counter weight, indicator pin etc. Including marking plate with white paint and marking at every 10 cm interval with necessary letters and numbers of suitable size with signal red radium paint for indication of water level position. Refixing and re-erecting water level indicator at the height from ground level to top edge for semi under ground sump or full length for overhead reservoir above the staging with necessary MS angle iron and flat iron supported with nuts, bolts and washers complete all as specified and directed.
Repairs to domestic type Reverse Osmosis (RO) plant of capacity 50 litres per hour of make HITECH by dismantling to carry out servicing and overhauling and making functional after thoroghly examine / checking all components, inlet and outlet piping system, pressure and activated carbon filters, RO Membrane assembly, booster pump, pressure meter, auto flushing (solenoid valve), automatic ON/OFF, indicators and anti scalant dosing system etc and replacement of spare parts/ components viz. 80 GPD Membrane, filter set, adopter, motor, solenoid valve, and pipe coupling set and testing for its performance complete all as specified and directed. Note :- (i) 80 GPD Membrane, filter set, adopter, motor, solenoid valve shall be measured and paid separately as Supply only. (ii) Labour charges for replacement of items under supply only are deemed to be included in rate quoted by the contractor.
Supply only 80 GPD Membrane suitable for Reverse Osmosis (RO) plant of capacity 50 litres per hour complete all as specified and directed.
Supply only filter set suitable for Reverse Osmosis (RO) plant of capacity 50 litres per hour complete all as specified and directed.
Supply only Adopter suitable for Reverse Osmosis (RO) plant of capacity 50 litres per hour complete all as specified and directed.
Supply only Motor suitable for Reverse Osmosis (RO) plant of capacity 50 litres per hour complete all as specified and directed.
Supply only Solenoid Valve suitable for Reverse Osmosis (RO) plant of capacity 50 litres per hour complete all as specified and directed.
M & L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from the Pump House at TRV Area or form location as specified by Engineer-in-charge and testing from Govt approved testing laboratory , submitting of report from minimum following parameters . (a) Turbudity (NTU) (b) pH (c ) Total Hardness as CsCO2(mg/l) (d) Iron as Fe(mg/l) (e) Magnesium as Mg (mg/l) (f) E-coli or thermotolerant coliform bacteria (g) Remarks of Govt testing lab . Notes: 1. Saperate water samples should be collected & tested for above location as specified above (Every Three Months). 2. Not Carrying out water test/Non submission of water test report in respective month will impose penalty at the two times of quoted rates.
M&L for Repair of foot valve 100mm size after disconnecting & removing the foot valve from balancing tank , and refitting/relaying after rectification by replacing heavy duty leather gasket, nuts & bolts if any complete all as directed by Engr-in-Charge
M & L for Preparation of old painted surfaces and applying two coats of synthetic enammel paints as directed by Engr-in-Charge on external surfaces of water filteration plant, CI suction / delivery pipes electric monoblock induction motors with brush application complete all as specified.
S & F Pressure gauge 4"dial 0-21 kgs rating with taking down old u/s pressure gauge of any type
M & L for carry out Comprehensive maintenance/servicing through qualified and experienced technician for Centrifugal Monoblock pump sets of capacity 15 HP to 20 HP (Pump & Motor) including checking of electrical connections, LT Panel, starter, contactors, relays, pump controllers, timers, Bearings of pump and motors, shafts, coupling, cooling fan, gland packing, nut bolts, foundation, winding of motors, checking of impeller, suction and delivery piping inside pump house, checking of foot valve etc and carry out necessary preventive maintenence including tightening of loose electrical/mechanical connections, replacemnt of burnt/unserviceable control panel/power panel wiring with same size copper conductor as and when required, oiling, greasing, provn of gland packing, replacement of warn out/rusted nut, bolts, bushes, washers, greasing nipples, locking pin, rubber gaskets, setting of relays, contactors, air plug, etc for efficient running of Pump sets all as specified and as directed by Engr-in-charge.
M&L for disconnecting and removing the PUMP SET of capacity 15 HP to 20 HP from its foundations/ base frame located at swimming pool by disconnecting suction, delivery pipes, pump couplers and electrical connections, taking it to workshop for repair, Dismantling and opening up of PUMP assembly complete, removing worn out Gland, bush, shafts, pump Housing, bearing, Gland Packing, Pin locking set, nuts and bolts, washers etc., and replacing with new parts of same make/model/type including necessary machining works as required, assembling, Balancing and refixing the pump back to its postion after getting repair and making all connections, carry out alignment, and testing for satisfactory function all as specified and as directed by Engr-in-charge.
Material and Labour for disconnecting and removing the MOTOR of capacity 15HP to 20 HP from pump sets and foundations/ base frame located at swimming pool, by disconnecting electrical connections and pump couplers, taking it to workshop for repair, dismantling stator and rotor assembly, removing burnt out winding wires complete, rewinding the stator with same guage and type of insulation copper conductor winding wires and insulation sheets , applying insulating varnish over the complete winding, drying up by heating , assembling back the stator and rotor including replacement of nuts, bolts, studs, Gasket, packing, locking pin, terminal blocks, and terminal bolts and nuts and misc accessories & hardware required for making motor functional, both end bearings (labour only) with same size/make complete for following motors all as specified and as directed :- Note: 1. Bearing shall be measured and paid saperately.
Supply and fixed in repaird pump shaft made of stainless steel for Centrifugal monoblock Pump set of Make Kirloskar 15 HP motor.
Supply and fixed in repaird pump shaft made of stainless steel for Centrifugal monoblock Pump set of Make Kirloskar 20 HP motor.
Supply only coupling suitable for centrifugal pumpset coupled with 20 HP motor along with flanges, nuts, bolts, washers, etc incluiding all cutting key and to suit shaft of pumpset and motors all as directed by Engr-in-charge.
Supply only coupling suitable for centrifugal pumpset coupled with 15 HP motor along with flanges, nuts, bolts, washers, etc incluiding all cutting key and to suit shaft of pumpset and motors all as directed by Engr-in-charge.
Supply only antifriction heavy duty ball bearings for centrifugal pump set 15 HP complete all as specified and directed (as per existing size)
Supply only antifriction heavy duty ball bearings for centrifugal pump set 20 HP complete all as specified and directed (as per existing size)
Supply and install fully automatic Starter Star Delta type with single phase protection feature suitable for operation on AC, Three phase four wire , 415 Volts, 50 Hz supply for Motor of capacity up to 20HP with relay range 9-15 Amps complete
S & F in replacement Power Contactor 3-Pole with AC Coil 50 Amps along with Aux. Contacts 02NO & 02NC for 3 phase star delta starter AC 440 volts 50Hz make as approved in the existing panel, connecting up and testing all in repairs incuiding material for wiring if required as specified and as directed.
S & F Thermal overload relay range 20 to 33 Amps including taking down the old relay incuiding material for wiring if required complete all as specified and directed.
S & F in replacement Single Phase preventor relay SPPR type Sz5 (6 Wire), 415V,
M&L for Painting of pump sets & motor assembly of capacity 15Hp to 20 Hp and Fitration Plant located at swimming Pool comprising electric Motor , pump , base frame, suction and delivery pipe lines inside & outside of pump house, valves any type and size up to 250 mm dia withTwo coat of synthetic enamel paint of approved colour including scrubbing / cleaning all metalic surfaces before painting and writing SM/MES No. etc, all as specified and as directed :-
M & L for carry out water quality anyalsis for bacterial , chemical and biological analysis including for collection of water samples from the Swimming pool at TRV Area or form location as specified by Engineer-in-charge and testing from Govt approved testing laboratory , submitting of report from minimum following parameters . (a) Turbudity (NTU) (b) pH (c ) Total Hardness as CsCO2(mg/l) (d) Iron as Fe(mg/l) (e) Magnesium as Mg (mg/l) (f) E-coli or thermotolerant coliform bacteria (g) Remarks of Govt testing lab . Notes: 1. Saperate water samples should be collected & tested for above location as specified above (Duration Every Three Months/ as and when directed by Engr-in-charge).. 2. Not Carrying out water test/Non submission of water test report in respective month will impose penalty at the two times of quoted rates.
M & L for carry out Comprehensive maintenance/servicing/cleaning through qualified and experienced technician for vertical pressure water filteration plant of capacity 100000 ltrs/ Hr including replace of Quartz pebbles and Quartz sand of different sizes as per site requirement and complete cleaning of pressure filter, frontal piping, operating valves, back wash pipe lines, air vent pipe with air release valve, pressure gauge etc complete in all respect and including with filter media comprising of assorted sizes of pebbles and sand etc suitable to remove suspended impurities like dirt, dust, mud, colloids and similar contamination from the raw water to make it portable water, achieve the specified results and to satisfy complete all as specifid and directed by Engineer - in Charge . Note:- (i) The frontal piping, valves, fittings and fixtures required for smooth functioning of pressure filter plant are deemed to be included into the above description and quoted rates.
Material and labour and complete servicing of chemical dosing system (chlorine/alum/alkali) comprising of FRP tank of capacity 150 ltrs with FRP lined using Isopthalic resin an inside as well as outside, electronic metering pump, Agitator assembly coupled with electric motor having long shaft made of polypropylene with two blades of bottom to make homogenous solution of dozing chemical, glass tube level indicator fitted with agitator tank and making electrical and water supply connection from the existing source with in the plant room including testing the plant for better performace complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repair and Replacement of Pool jet made of Stainless steel N-304 grade having size 100x35mm height, horizontal flow design adjustable type with end connection of 50mm BSP for uniformly spreading of water and chemical along the pool floor including all fittings/fixing accessories complete in all respect and as specified. . Note:- (i) Required water pressure flow test each and every pool jet for higher satisfaction of users/ Engr-in-charge. . (ii) Complete cleaning of pipe connected to Pool Jet included into the quoted rates. . .
Supply and Fix in repair and Replacement of in built type Pool cleaner semi automatic in stainless steel material of size 100x200x800 mm, fitted with special nylon brush and provided 70 mtr long poly propelene rope of 3/4" size and servicing of 1.5 HP motor including winding, bushing, cleaning complete all as specified and directed by Engr-in-charge. Note : Servicing, winding & cleaning rate to be deemed included in rate quoted by the contractor.
Supply and Fix in repair and Replacement of skimmers made of stainless steel N-304 grade having size as per existing (100x500mm) with flow rate of 5000 LPH installed in position complete all as specified and directed. Note :- (i) All PCC/ Tiling works are deemed included into the quoted rate.
Repair and cleaning of hair and lint catcher made of stainless steel SS-304 grade material of size 500x750x40 mm made of channel frame with 2 Nos of removable type mesh wire mesh screens for trapping leaves, plastic, hairs, cloth pieces etc from going to diving pool/balancing tank complete all as specified and directed.
Supply and fixing of Overflow grating 475 mm wide in ABS material for over flow channel complete in all respect all as specified and directed.
Material and labour for nylon net for picking leaf as per existing size etc complete all as specified and directed.
M & L for detecting water leakage/blockages in underground / Celling / Floor water pipe lines, turning off/On water and draining the system as required, with necessary excavation at location of leakage/blockage and carrying out repair of HDPE pipe of any size including replacement of u/s fittings & repair/replacement of joints, all as specified and direted by Engineer In Charge Note: 1. Excavation & Earthwork including PCC & RCC/ Foam work including tiling works deemed to be included in quoted rate and upto highly satisfaction of Engr-in-charge/Users. 2. Additional Pipe, Joint and jointing material, HDPE fittings such as bends, reducers, short pieces, connectors, backnuts, diminishing pieces, caps, plugs and unions, etc upto 250mm shall be included in the quoted rates.
Material & Labour for HDPE Pipe 250 mm Outer Dia of pressure holding capacity 16 Kg/Sqcm, ISI marked as per IS 4984 & IS 14333 grade PE-100 laid in floor of swimming pool, diving pool, plant room etc including jointing by HDPE welding / fusion system complete all as specified and directed.
Material & Labour for HDPE Pipe 200 mm Outer Dia of pressure holding capacity 16 Kg/Sqcm, ISI marked as per IS 4984 & IS 14333 grade PE-100 laid in floor of swimming pool, diving pool, plant room etc including jointing by HDPE welding / fusion system complete all as specified and directed.
Material & Labour for HDPE Pipe 63 mm Outer Dia of pressure holding capacity 16 Kg/Sqcm, ISI marked as per IS 4984 & IS 14333 grade PE-100 laid in floor of swimming pool, diving pool, plant room etc including jointing by HDPE welding / fusion system complete all as specified and directed.
Material & Labour for 250 x 250 x 250 mm Outer dia, Tees, HDPE pipe fittings complete including all materials for HDPE but welded / flanged joints with the help of stob end, flange rubber gasket, nut bolts, washers etc . Make : Supreme/Prince/Kisan
Material & Labour for 160 x 160 x 160 mm Outer dia, Tees, HDPE pipe fittings complete including all materials for HDPE but welded / flanged joints with the help of stob end, flange rubber gasket, nut bolts, washers etc . Make : Supreme/Prince/Kisan
Material and labour for Butterfly valve 200mm dia with ISI marked including all accessories and complete in all respect all as specified and directed. Make Advance, L & T (Audco), Normax, Castlers
Material and labour for Butterfly valve 150mm dia with ISI marked including all accessories and complete in all respect all as specified and directed. Make Advance, L & T (Audco), Normax, Castlers
Material and labour for Butterfly valve 80mm dia with ISI marked including all accessories and complete in all respect all as specified and directed. Make Advance, L & T (Audco), Normax, Castlers
Material and labour for Butterfly valve 50mm dia with ISI marked including all accessories and complete in all respect all as specified and directed. Make Advance, L & T (Audco), Normax, Castlers
M & L for Cast Iron Foot Valve 100 mm dia bore, having cast iron body perforated CI/MS strainer, Gunmetal seat, one end flanged ISI mark, including required number of nuts, bolts, gaskets, seat etc complete in all respect and testing against leakage complete all as specified and directed.
Supply and Fixing nylon net wire mesh(like mosquito net) two meter in breadth and 15 meter in length for cleaning of any unwanted particles/insect in the swimming pool.
Supply and Fixing hard plastics teeth brush for cleaning of swimming pool of size 30 cm length and width not less than 10 cms fixed with light grade GI Pipe 15 mm bore of 8 Mtr Length.
M & L for complete cleaning of swimming pool with Pressure Jet spray including removing of sludge mud accumulated at bottom, Floor and wall all around swimming pool removing Algaeside of entire wall and in bottom tiles upto entire satisfaction of Engnr-in-Charge. Note (i) Necessary Ladder, Brush, cleaning material etc reqd to be included into quoted rates. (ii) Complete drain out of water is responsible to the contractor under his own arrangement and deemed to included into quoted rate. (iii) Contractor is resposible for Refilling of complete swimming pool water with removing of algea, dust partical upto highly satisfaction of Engr-in-charge/Users before handed over the swimming pool to be deemed to included into quoted rate.
Supply and Fixing PVC Flexible hose pipe as per existing size (50/40mm dia) for suction / outlet of water in swimming pool installation complete all as specified and as directed by Engineer-in-Charge.
Material and labour for repairing/welding of Stainless Steel Hand railing all around of swimming pool including replacement of all nuts, bolts, clamps grouting in walls and miscellanious accessories & hardware as required complete all as specified and as directed by Engineer-in-Charge. Note:- (i) Welding/ Hardware as required rate to be deemed included in the rate quoted by the contractor.
Supply and Fix in repair and Replacement of LED type under water pool light fitting 6/10 watt (as per existing) capacity made of stainless steel having size 300mm dia & 40mm height, sleek design with LED bulb, operating voltage 12 volts, step down transformer, water seal gasket including electric connection through 4 sqmm, 3 core complete in all respect and testing complete all as specified and as directed by Engr-in-charge. Make ION exchange code No LED 6W/UV Rich Model No LED -F 501 or equivalent in Cromption/ Wipro/Bajaj. Note :- (i) Each under water fittings shall be connected through independent step down transformer 230V/ 12V.
Supply and fixing 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN current carrying capacity in the MCB DB complete with connection testing and commissioning.
Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 40 to 100 Amp current carrying capacity in the DB complete with connection testing and commissioning.
Supply and fix Wooden brush for suction sweeper machine of size 74cm x 7.5cm with 70mm long nylon bristles fitted with nut and bolts complete all as specified and directed.
Material & labour for 250mm dia OD, Elbows of HDPE pipe fittings complete including all materials for HDPE but welded/flanged joints with the help of stob end, flange rubber gasket, nut bolts, washers etc.
Material & labour for 200mm dia OD, Elbows of HDPE pipe fittings complete including all materials for HDPE but welded/flanged joints with the help of stob end, flange rubber gasket, nut bolts, washers etc.
Material & labour for 160mm dia OD, Elbows of HDPE pipe fittings complete including all materials for HDPE but welded/flanged joints with the help of stob end, flange rubber gasket, nut bolts, washers etc.
Saviour Security Systems
Radha Engineering Services
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .