SPECIAL REPAIR TO BLDG (MAGAZINE/AMN STORE) AT 504 ASC BN AT OLD CANTT PRAYAGRAJ AND PROVN OF SECURITY LIGHTS FOR FORT WALL NEAR OFFRS MESS AREA AT OD FORT PRAYAGRAJ.

Amount

Dismantling asbestos cement (corrugated, semi corrugated sheets in roof coverings including ridges complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated coloured steel sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel coloured sheet, 0.50mm thick having tensile strength of 550 mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 Sqcm and over in section in framed work in any position complete all as speciifed and directed.

S&F rolled mild steel work in roof trusses (framed), trussed, purlins, crane gantries, pillars, rails and fastenings and heavy bracket framing (beam, tee, angle, channel, Hollow or flat sections) including distance pieces, cleats etc. conforming to Fe 410-W (Gde - E-250) quality - A incl dismantling of old steel work complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified and directed.

M&L for providing false ceiling using cement fiber board of size 600x600x6mm and GI snap grid frame complete all as specified and directed Frame Work: (i) GI angle of size 25x25mm screwed fixed to the parameter of the wall at a level/height as directed by Engineer-in-charge. (ii) Main ‘T’ runners: Sections (3600mm long) with ‘H’ slots at 150mm/300mm center in its vertical flange to hold the cross ‘T’ sections are suspended from the soffits with the help of rawl plug, soffits cleats and GI wire (4mm dia) at 1200mm c/c. These sections also have notch at its both ends to increase the length. (iii) Cross ‘T’ runner: Sections of 1200mm length with ‘H’ slot in the center and notches at the both ends are inserted fixed into the main ‘T’ at 600mm c/c to form a regular grid of 600x1200mm cross ‘T’ section of 600mm length is inserted fixed into the 1200mm cross ‘T’ to form a regular grid of 600 x 600mm.

Demolition of brickwork built in cement or cement lime mortar complete all as speciifed and directed.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1: 6 complete all as specified and as directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4, mixed with liquid water proofing compound @ 200ml/50Kg cement complete all as specified and as directed. NOTE: Liquid water proofing compound shall be measured and paid separately under respective item here-in-under.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L for preparation of old painted surface by complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) using 80grade sanding pad and make the surface free from dust, loose paint etc complete all as specified and as directed.

M&L for applying waterproof cement based putty @ 1 Kg (undiluted) per sqm over prepared surface of wall and sanding of the putty surface with mechanical wall sander using sanding pad of 240 Grit or above to make the surface even and smooth complete and make it free from dust etc. complete all as specified and directed.

M&L for one coat of acrylic water based interior /exterior grade primer @ 0.9 ltr (undiluted)/10 sq mtrs mixed with water in 1:1 ratio complete all as specified and directed.

M&L for two coats of water based premium acrylic smooth exterior emulsion paint of approved colour complete all as specified and as directed.

M&L for two coats of Oil bound distemper paint using Airless spray technology complete all as specified and directed.

NOTES FOR SMART PERIODICAL UNDER ITEM NO. 14 TO 18 ABOVE: (a) The paint shall have silicon additive & Color stay Technology, Excellent Dirt Pick up resistance, anti algal properties and low VOC (less than 50 gram/ litre) as per the LEEDS specifications, (b) Consumption of paint shall not be less than 1.79 Kg/10Sqm for two coats where as for primer it shall not be less than 0.90 ltr/10 Sqm for one coat. (a.) The smart periodical services shall be got executed through authorized applicator of manufacturer whom painting materials is proposed to use. The approval of GE in writing for name of applicator and MOU with him is mandatory requirement. before execution of work. (c) Production of Purchase vouchers for full quantity duly defaced by Engg-in-charge is mandatory requirement for release of payment. The same shall be recorded in MB. (d) No material brought st site shall be allowed to incorporate in the work without approval of GE in writing. (e) All painting work i.e removal of existing treatment, application of putty, primer and paint, sanding putty surface etc shall be done through grinding or spray machine of appropriate capacity and specifications.

Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection, finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 1st quality non skid coloured ceramic Heavy Duty parking tiles n exc 0.11 Sqm in area & 10 mm thick, set and jointed in neat cement slurry & pointed with coloured cement to match in floor over and including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in vertical surface, skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 Complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450mm X 300mm X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick Baroda green marble (in single full length) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 20 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Baroda green marble work, 18- 20mm thick in riser of steps, skirting, dado and pillar laid over and incl 10mm thick plaster in cement mortar (1:3), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge/half rounded, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area exc 1.5 Sqm but n exc 4.00 Sqm each complete all as specified & directed

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) Area not exc 1.5 Sqm each complete all as specified & directed

Taking down shutter of any description exceeding 1 sqm and not exceeding 2 sqm area each complete all as specified and directed.

S&F 125 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed

S&F 105 x 60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified & directed

M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) as in bed block and filling in back side of pressed steel door frames and holdfast complete all as specified & directed

S&F 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class hardwood small fittings such as bracket of any size, hinge blocks, cleats, door/window stoppers and like articles not exceeding 200 cubic centimeters each complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet reinforced with 19mm M.S. Square tube of 19 gauge, fixed in opening as per specification & drawing given on page No. 178 of SSR Part-II-2020 under section 8, complete all as specified and directed.

Factory made Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & given on page No. 179 of SSR Part-II-2020 under section 8, complete all as specified and directed.

S&F 250mm(bolt length) Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F 200mm(bolt length) Aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm Aluminium handles, cast type, anodised of pattern/design as approved by GE/sample kept in GE's office complete all as specified and directed.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified & directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for Mild steel framed work such as grills, grataings, ladder, railing and similar work etc with ends of bars shouldered and/or riveted or forged into spikes conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for 5 mm thick sheet glass ordinary quality (area of each pane not exc 0.5 Sqm ) incl rubber beading and jointing cleats complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel /iron surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, over 10cm in width or girth, not otherwise described including preparation of surface complete all as specified and directed.

M&L for Powder coated Anodised aluminium frame for doors/windows/ventilators with one or more rebates including joining cleat for fixing complete all as specified and directed. Note:- Thickness of powder coating shall not be less than 50 micron.

M&L for fabrication and fixing aluminium window / ventilator, OPENABLE TYPE including lock, jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc and 5.5mm thick ordinary plain glass complete all as specified and directed. The alluminum sections used shall be POWDER COATED of following specifications:- (a) Section size 61.85 x 31.75x 1.2 mm thick for styles (top & bottom) & side rails Section size 44.45 x 44.45 x 1.2mm thick for lock rail of shutters.

S&F in repair Aluminium die cast body Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

S&F 140mm Floor door stopper of brass body and tongue, with hard drawn steel spring complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in bed block , coping & path etc incl necessary formwork complete all as specified and directed.

S&F in repair 202 grade stainless steel drapery rod 20 mm dia with fixing brackets and fancy type finials /Lattos, complete all as specified & directed Note : Brackets and finials/latto shall strictly as per sample kept in GE's office or as approved by GE.

Demolition of mud or any other material of any description over RCC roof slab in any thickness and removing the same out side MOD land, complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in roof padding (levelling course), n'exc 25mm average thickness, finishing the surface fair & even complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 on fair faces of concrete surfaces /roof top, mixed with liquid water proofing compound @ 200ml per 50 Kg cement, finished surface even and smooth without using extra cement complete all as specified and directed. Note :- Liquid WPC shall be measured and paid separately.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges all around periphery of the wall complete all as specified and directed.

M&L for applying high performance polyurethane liquid membrane waterproofing coating on roof in two layer complete as per manufacturer's instructions complete all as specified and directed. The treatment shall be carried out in following steps:- (i) Step 1: clean the roof surface thoroughly to make it free of dust, dirt, grease, and other debris. (ii) Step 2 : Fix the cracks on the surface bed by cutting it into the V section, followed by cleaning and filling with polyurethane-based crack filling compound and white cement in the ratio of 1: 2. (iii) Step 3 : Substrate should be neutralized using the acid application to remove the alkalinity. (iv) Step 4 : All joints, corners and RWP openings shall be properly repaired as per manufacturer's instructions. The material recommended by manufacturer shall be used and cost of same shall deemed included in quoted rates. (iv) Step 5 : Apply a pack of polyurethane primer coat to the surface as an adhesive coat, and allow to dry completely for at least 8 hours.

Contd/... (v) Step 6 : Two successive finishing coats with polyurethane liquid membrane must be applied by brush/roller/spray. Each coating must be dried for at least 12 hours before applying the subsequent coating. After Geotextile fabric of 40 GSM to be applied over first coat while first coat is still wet . This PU coating has to be continued 150 mm up the parapets or walls and at least 100 mm into the rainwater pipes. (vi) The final polyurethane coating is sprinkled with a layer of 300 microns of sand.

NOTE: (a) The contractor shall submit a guarantee of 10 years from the date of completion of work for waterproofing treatment along with manufacturer's guarantee. The amount @ Rs. 40 (Forty) per Sqm and subject to min of Rs. 4000/- shall be retained from final bill till the expiry of guarantee period. The contractor at his own option may furnish fix deposit receipt in lieu duly plaged in favour of GE (East) Prayagraj. (b) The water proofing shall be carried out by authorised applicator of manufacturer. The name of applicator shall be got approved in writing from GE within 30 days since commencement of work. (c) Liquid membrane @ 1.5 Kg/Sqm/ 2 coats and epoxy primer @ 0.15Kg/Sqm shall be applied. The liquid membrane shall strictly as per relevant IS code/BIS code. (d) Each stage (preparation of surface, priming, Ist coat and 2nd coat) shall be got approved from GE in writing before execution of successive stage. (e) Production of Purchase vouchers for full quantity duly defaced by Engg-in-charge is mandatory requirement for release of payment. The same shall be recorded in MB.

Dismantling boarding any description fixed in any position with nails or any other means complete all as specified and directed

M&L for fabrication and fixing of pressed steel cupboard shutter using 1 mm thick MS plain shaeet for shutter & 1.25 mm thick for frame bend to shape, locking arrangement using mortice lock having handle incl two coats of synthetic enamel paint on inner and outer surface over a coat of red oxide primer complete all as specified and directed.

M&L for 2nd class Hard wood Plain fillets, square, rectangular or triangular in section secured with nails or brads and having cross sectional area not exc 3 sqcm complete all as specified and as directed

S&F 18mm thick PVC celuka board plain white colour both side and fixed with screws/solvent cement/adhesive to make kitchen cabinet sides/top/bottom & selves inside the cabinet etc complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings heads, shoes, bends, swan-necks, etc., incl cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent complete all as specified and as directed.

S&F Stack clamps made out of 50mm x 5mm flat iron & 16mm round iron stays including bolts & nuts (not less than 8mm dia and 75mm long) and securing ends of stays suitable for 75mm/100mm bore pipe complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 15mm bore pipe complete all as specified & directed.

S&F GI tubes 15mm bore medium grade with all fittings fixed to walls and ceilings or laid in floor complete all as specified & directed

Taking up or down steel tubing and connection including cleaning for refixing or removal to store 20mm bore pipe complete all as specified & directed.

S&F 20mm bore GI tubing medium grade with all fittings and fixed complete to walls/ ceiling or laid in floors complete all as specified and directed.

S&F in repair 15 mm dia angular cock, cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.

S&F in repair vitreous china wash hand basin (WHB), white, flat back of size 550 x 400 mm excluding taps, waste chain and plug but including bracket, waste coupling of 32 mm size complete all as specified and directed.

S&F in repair 15 mm dia bib taps cast copper alloy, chromium plated, fancy type with capstan head, screwed down, screwed for iron pipes complete all as specified & directed.

S&F in repair 15 mm dia stop valves cast copper alloy chromium plated long shank(concealed type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125 mm dia with shower arm complete all as specified and directed.

S&F in repair Vitreous china squatting pan ‘Orissa’ pattern of size 580 x 440 mm, White, with integral foot rests including provision of cement concrete bedding complete all as specified and directed.

S&F in repair PVC valve less, symphonic action type, flushing cistern 10 litres capacity, low level, white, with inlet ball valve float handle along with suitable flush pipe/bend including brackets, complete all as specified & directed.

S&F in repair brass chromium plated, fancy type angle cock screwed for iron pipes of dia 15 mm complete all as specified and directed.

S&F in repair 1000 litters capacity white colour double layer, ISI marked, rotational moulded polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces for inlet, outlet, washout, overflow, GI tank nipple and 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and directed.

S&F in repair 20 mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified & directed.

S&F in repair 15 mm dia Gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified & directed.

S&F in repair PVC connections, 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

S&F in repair brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work complete all as specifie and directed. Note :- Reinforcement shall be cut as required to facilitate demolition.

M&L for mild steel TMT bars 10 mm dia and over in reinforcement cut to length bent to shape required incl cranking bending, spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in chajja, manhole cover etc incl necessary formwork complete all as specified and directed.

S&F in repair Stainless steel soap dish of approved make and model similar to sample kept in GE's office complete all as specified and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.

M&L for point wiring for one light point/ fan point with 1.5 sq.mm FRLS PVC sheathed/insulated multi stranded 1100 volts grade copper conductor cable in PVC conduit complete all as specified and directed. NOTE:- (i) PVC conduit shall be of 20mm dia (min), medium class and with it's all accessories. (ii) Terminal box shall be sunken type and suitable for switch/sockets of appropriate modules. (iii) Sheet cover of suitable modules shall be provided (iv) Proper colour code shall be followed for Phase, earth and neutral wire. (v) Cutting chases in wall (in case of concealed or resseced type point wiring), if required, shall be measured and paid separately under respective item here-in-after. (vi) Point wiring shall strictly as per relevant code. (v) Rates of all material required/mentioned above shall deemed included in quoted unit rate except switches, sockets, fan regulators, ceiling rose, lamp holders etc.

All as per item No 98 above but with 1.5 sqmm cable for one 5/6 Amp socket outlet point on same board .

All as per item No 98 above but with 2.5 sqmm cable for one 5/6 Amp socket outlet point on independent board .

All as per item No 98 above but with 4.0 sqmm cable for one 15/16 Amp socket outlet point on independent board

S&F switch piano flush type, single pole, one way, 5/6 Amps 230 Volts complete all as specified and directed.

S&F socket outlet, flush type, suitable for 5/6 Amp, 2 module complete all as specified and directed.

S&F switch piano , flush type 15/16 amps, single pole, one way complete all as specified and directed.

S&F socket flush type suitable for 15/16 A, 5/6 pin, 2 module complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface Bakelite sheet 63.50mm dia complete all as specified and directed.

S&F fan regulator, stepped type, 120 watt single phase complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate alongwith LED bulb 10W complete all as specified and directed.

S&F in repair sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Single Pole and Neutral (SPN), 8 way 240Volts with 200 amps rated copper bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F repair sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Single Pole and Neutral (SPN), 4 way 240Volts with 200 amps rated copper bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair sheet metal enclosure/Distribution board for MCBs, double door type, epoxy powder coated, factory made, Triple Pole and Neutral (TPN), 4 way 415Volts with 200 amps rated copper bus bar, with enclosure blank plates for unused way complete all as specified and directed.

S&F in repair MCB SP, 6-32 Amps, 240V, 10KA, C curve complete all as specified and directed.

S&F in repair MCB SPN, 6-32 amps, 240V, 10KA, 'C' curve complete all as specified and directed.

S&F in repair MCB TPN, 100 Amps, 415V, 10KA, 'C' curve complete all as specified and directed.

Taking down carefully sub main wiring (any nos of wire and size) with earth wire , any description with all accessories complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4 Sqmm nominal cross sectional area and one run as continuous earth wire of similar description, drawn in and including 20mm dia 'medium grade' PVC concealed conduits (with fittings), complete all as specified and directed. NOTE: Two run of main wire and one run of earth wire with conduit shall measured as One unit length..

S&F LED tube light fittings, 20 watt fixed to wall, complete all as specified and directed.

S&F LED Mirror light fitting, 10Watt, 2 feet long including LED lamp and making connection complete all as specified and directed.

S&F in repair 36 Watt LED panel light fittings , recess mounting of size 2'x2' including making connection with PVC insulated copper conductor cable of suitable size complete all as specified and directed.

S&F in repair Building lighting luminaire, 35 Watt complete including LED Lamps with all accessories and bracket made out of 25mm bore GI pipe (light grade), 1.20 m long made to shape and fixed to existing pole or bldg by means of 2 Nos mild steel flat iron 40x6mm clamps with suitable size bolt, nuts & washers complete all as specified and directed.

Taking down carefully existing ceiling fan, wall fan & exhaust fan by disconnecting all electrical connection, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed. (NOTE: Fans shall be deposited by the contractor in AGE E/M Old Cantt yard).

S&F BLDC ceiling fan, 1200 mm sweep, BEE 5 star rated, 230 V, 50 Hz, single phase AC supply with remote or electronic regulator unit for speed control and all remaining accessories complete all as specified and directed.

S&F exhaust fan heavy duty, steel body with steel blads, 300mm sweep, single phase 240 volt including making electrical connection and writing MES No with black paint complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below GL) connected with GI wire 4.0 mm dia as earthing lead by means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 15 mm bore for protection of GI wire from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm diaTMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing including dismantling of old ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth strip and protection pipe upto 7.5 meter beyond the earth plates electrode)

Supply, laying and testing (in replacement) 1.1_KV XLPE insulated PVC sheathed armoured Aluminium LT cable with stranded aluminium conductor of size 50 sq mm 3.5 core incl taking down old unsv cable complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 M wide and not exceeding 1.5 Mtr deep and getting out complete all as specified and directed.

Returning filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft soil complete all as specified and directed.

Removing excavated surplus soil not exceeding 50 Mtr and depositing where directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand up to 18 cm thick and consolidation complete all as specified and directed. Note : Punned thickness i.e 18 cm shall only be measured for payment purpose.

Supply and laying dry well burnt locally available brick sub class 'B' old size bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

S&F for 50 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.

M&L for air termination aluminium rod of size 12 mm dia & 300 mm long, single pointed complete all as specified and directed.

M&L for providing test point terminal block made out of gun metal or phosphorous bronze of size 75mmx75mmx25mm , drilled and screwed with and including 03 Nos 8 mm dia 25 mm long hexagonal head screws complete all as specified and directed.

M&L for aluminium strip of size 25mmx3.15mm with saddle /cleat and fixing screws as in roof conductors and down conductors complete all as specified and directed.

M&L for GI tubibg light grade of size 50 mm dia 1.2 mtr long duly threaded on one side incl fixing of GI socket for fixing ait termination and incl FI clamp of size 50x6mm bend to shape for fixing of GI pipe incl PCC block and fixed to roof incl insulator complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below GL with top edge of plate not less than 1.50 m below normal ground level) connected to galavanised earth lead strip 32mm x 6 mm (7.5m) as means of bolts, nuts, check nuts and washer besides brazing at all joints as shown on drawings and including excavation, earth work, GI pipe (ISImark) light grade 40mm bore for protection of GI strip from earth electrode to and including the earth test point, supplying and laying charcoal dust, common salt, PCC 1:3:6, type C-1(using 20 mm graded crushed stone aggregate ) chamber and mild steel angle iron frame 40 x 40 x 3 mm and 40 mm thick pre-cast RCC cover 1:2:4 , type B-1(using 20 mm graded crushed stone aggregate ) reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with mild steel handle 12 mm dia, PGI funnel and wire mesh, 20 mm dia GI pipe light grade(ISI marked) for watering all as shown in electrical plate No 3 of SSR Part-I and connected to earth test point including testing & taking down of old/ ineffective earthing complete all as specified and directed. (Note:- The rates quoted shall also deemed to include the cost of Earth test point and earth wire and protection pipe upto 7.5 meter beyond the earth plates electrode)

Supply and fixing LED flood light 200 watt 230 V AC, Correlated Color Temperature -CCT( K) 3000K-Warm white , Luminous Flux(Lumen)±10% (18000) Luminous Efficacy (Im/W)±10% (90) ,outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp all as specified and as directed.

S & F cable junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 139 x 119 x 70 mm incl necessary suitable size terminal connector single phase with neutral system mounted on saddles of suitable length and provn of aluminium cable lugs for incoming & out going LT cable connections with junction box fixing clamps made up of MS flat, nut and bolt on poles complete all as directed .

R.K.ASSOCIATES (BID ID -3147894)