SPECIAL REPAIRS TO QUARTER DECK (P-90) AT INS HAMLA UNDER GE(NW) BHANDUP

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified and directed.

M&L PCC 30mm thick type B0, 1 : 2 : 4 (12.5 mm graded aggregate) in sub flooring complete all as specified and directed..

M&L vitrified ceramic tiles 10mm thick light shade (Square / rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Ditto all as above light shade but over and including provision of screed bedding 10mm thick in CM 1 : 3 in vertical surface complete all as specified and directed.

M&L glazed ceramic jointless coloured tiles in vertical surface 300 x 450 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

Material and Labour non skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not excceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

M&L Marble work other than white or black/Baroda green 18 to 20 mm thick (table rubbed and polished) in cooking platforms, jambs and like over and including provision of 20mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. .

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

M & L for granite 18 to 20mm thick (of any type) table rubbed and polished) as in floor such as steps, window cills/jambs, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15mm thick ready mix plaster on fair faces of brick work or concrete surfaces of wall finished even and smooth including necessary scaffolding complete all as specified and directed.

M & L for 20mm thick ready mix plaster using WPC @ 2% by weight of cement on brick work or concrete surfaces; surfaces finished even and smooth including necessary scaffolding complete all as specified and directed.

M&L for preparation of new plastered surface of walls, chajjas, slabs, projections and applying two coats of 100% anti fungal acrylic emulsion paint in approved shade over a acoat of primer and including scffolding complete all as specified and directed.

Labour only for complete removal of existing treatment on walls including washing / rubbing down with water including necessary scaffoldings etc complete all as specified and directed.

Labour only for complete removal of existing treatment on ceiling including washing / rubbing down with water including necessary scaffoldings etc complete all as specified and directed.

M&L for applying 3 mm coat of white cement based wall care putty on wall , new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for applying one coat of white cement based wall care putty on Ceiling, new or old surfaces of any description finished even and smooth complete all as specified and directed.

M&L for two coats of oil bound distemper on newly putty wall surfaces including necessary scaffoldings etc complete all as specified and directed.

M&L for two coats of oil bound distemper on newly putty ceiling surfaces including necessary scaffoldings etc complete all as specified

Taking down chowkhats or frame with shutters (without taking off shutter from the frames) including grills etc where existing, exceeding 1.5 sqm but n exc 4 sqm completed as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutter from the frames not exceeding 1.5 Sq. M each complete all as specified and directed.

Taking down shutter of any description exc 1.00 but n exct 2.00 sqm each Sqm each complete all as specified and directed.

Taking down door / window shutter with grills of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.

S&F extruded Powder coated aluminium section as in window, ventilation,door,particians (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed. Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all neecssary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.

S & F aluminium grill conforming to DG- 102 (10mm X 5.2mm) thick of approved design as approved by GE and fixing with and including 'F/U' channel not less than 1.5mm thick complete all as specified and directed.

Supply only sheet glass 4.8 mm thick in glazing with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.

Supply only Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

S&F MS flot iron as in hold fast and similar work as specified Gde Fe 290 Gde E-165 complete all as specified and directed.

M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.

M&L Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed.

S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats.

S&F stainless steel butt hinges 100mm size complete all as specified and directed.

S&F 150mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and directed.

S & F Mortice lock, vertical type, size 100 mm brass 4 levers complete all as specified and directed

S&F150 mm length aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

M&L 300mm long Aluminium alloy, anodised, sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, cast or extruded section or cast aluminium alloy and fixed complete all as specified and directed..

M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces complete all as specified and directed.

M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.

curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.

S&F in repairs Aluminium brackets for curtain rail 20mm dia and fixed complete all as specified.

S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates Fe410 gde E-250 quality A, etc complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails, gates and fastenings and heavy bracketframing (Beam, tee, angle, channel or flat sections) Fe410 gde E-250 quality B including distance pieces, cleats etc. complete all as specified and directed.

S &F Manglore clay tile (Size 0.38 mtrX 0.225 mtr)with proper overlapping over wooden batten and cement mortar 1:3 for bonding of tiles complete all as specified and directed.

Fixing only Manglore clay tile (Size 0.38 mtrX 0.225 mtr)with proper overlapping over wooden batten and cement mortar 1:3 for bonding of tiles complete all as specified and directed.

S &F Manglore clay ridge tile with proper overlapping and cement mortar 1:3 for bonding of tiles complete all as specified and directed.

Taking down roof trusses, coupled rafters or trussed beams above 4 mtrs & upto 8mtrs complete all as specified and directed

Dismantling posts or struts (wood) any section embeded in brick masonry wall , including taking out embedded portion and making good disturbed surface complete all as specified and directed

S&F II nd class Hard Wood plain, solid straight wrought for segmental work , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.

M&L for french polishing on surfaces of any description width or girth and including cleaning and preparing the surfaces including a coat of wooden filler on old wooden surfaces one or more coat etc complete all as specified and directed.

Dismantling boarding,any description, fixed in ceiling ,any position with nails complete all as specified and directed

M & L for Plywood 12 mm thick, grade BWR,type BB, fixed with nails to timber frame work on sloping area in repairs complete all as specified and directed.

M & L for Plywood 12 mm thick, grade BWR,type BB, fixed with nails to timber frame work on sloping area in repairs except plywood complete all as specified and directed.

Dismantling Battens for tiles spacing N.exc 15 cm, shingles etc, of any size including tilting fillets complete all as specified and directed

Material & Labour Clean sawn battens at 30cm centres Hardwood 2nd class Exc 5 & n.exc 15 sq.cm with nails for fixing of manglore tile complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings Completa all as specified and directed

S &F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified and directed.

Fixing only Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified and directed.

S &F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified specified and directed.

M&L Two coat of synthetic enamel paint over a coat of red oxide primer to new steel surface including preparation complete all as specified and directed.

M&L for Two coat of synthetic enamel paint over a coat of red oxide primer to old steel surface including preparation complete all as specified and directed.

Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6.

M&L for 50mm thick Pcc (1:3:6), type C2, using 20mm graded stone aggregate as in plinth protection / paving, surfae finished even & smooth without using extra cement complete as specified and directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Supply only PVC connector 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

M&L PVC SWR floor trap 100 mm dia outlet with Stainless steel grating removeable & refixable type including jointing with solvent cement complete all as specified and directed.

S&F 40mm bore high density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc complete all as specified and directed.

S&F toilet paper holder brass chromium plated complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white with Plastic water closet seat, black, closed pattern withflat bottom, and cover and mild steel chromiumplated or aluminised hinging device complete all as specified and directed.

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified and directed.

M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

M&L two way bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

S&F Diverter for Hot & Cold mixer for tap and shower connected concealed to pipes with fittings of approved make complete all as specified and directed.

S&F in repairs brass chromium plated towel rail 20mm dia, "D" type, 600mm long between flanges complete all as specified and directed.

S&F stainless steel soap dishes approximate size 160mm x 160mm x90mm as complete as specified as directed.

M&L Glass Assembly sheet glass consisting of 5.5mm thick sheet glass with 30 cm dia corner shelf fixing with steel brackets in repairs complete all as specified and directed..

M&L Brass chromium plated shower rose 125mm size including fixing to steel pipe or union in repairs complete all as specified and directed.

M&L Hat and coat hooks, solid body of aluminium, 175mm to 250mm long and fixed in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

All as per item No.87 above but 20mm bore of pipe complete all as specified and directed.

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.

All as per item No.90 above but 20mm bore dia complete all as specified and directed.

Cutting chases, pinning in brick wall, making good to facins where required and pointing in cement mortar 1 : 3 to ends of edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth complete all as specified and directed.

S&F gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed bore of 40 mm in repairs complete all as specified and directed.

M&L Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 2000 ltrs capacity complete all as specified and directed.

M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.

M&L Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 20mm bore dia complete all as specified and directed

S&F in repairs 15mm bore dia angle cock Chromium plated 15mm bore dia complete all as specified and directed.

M&L Aluminium (extruded section) body door closer in repairs hydraulically regulated, designation No 3, universal type,suitable for door shuutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and directed.

M&L in repairs Wash basin, Vitreous China white Table Top) 425x340x175mm including waste coupling and fixing of waste pipe and pillar tap etc ( Suppy of pillar tap and waste pipe shall be measured separately) complete all as specified and directed.

S & F Brass chromium plated bottle traps of 40mm dia for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed

Supply only Pillar taps, cast copper alloy Fancy type, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed all as specified and directed.

Material and labour for wall to wall encloser of size 1950 x 2000 mm of 8mm thick profile glass and openable sliding door fixed to wall with stainless steel square section including suitable beading and roller for sliding door and rounded stainless steel handle fitted in both side of sliding door for opening purpose complete all as specified and directed.

M&L for post construction anti- termite traetment along the external wall below concreate or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement morter 1:2 to match the existng floor etc complete all as specified and directed.

M&L for post construction anti- termite of soil / concreate under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement morter 1:2 to match the existing floor etc complete all as specified and directed.

M & L for post construction anti - termit treatment at points of contract of wood work using chemical emulision (in oil or kerosin based solution ) @ 0.5 liters per holy by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centere to center and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.

Removing and cleaning existing vegetation growth in Structural & Non Structural members, shall be done by uprooting the tree projections of any girth, depth etc from members, cleaning roots and other plant extracts from the members, filling the voids in structural elements shall be done by cleaning the voids, cutting with concrete cutter to retular shape, applying polymer modified mortar 1 :4 propostion with addition of specified polymer 20% by weight of cement, finishing with spatula to build up section of the member complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed.

S & F in repairs stainless steel plated rack of overall size 75 x 75 Cm made out of 0.8mm thick SS sheet, with shelves and racks to hold kitchen utensils such as plated, tumblers, bowls and cutlery etc with edges of racks and shelves turned in, including fixing to wall iwth brass chromium plated screws as directed, plate rack of design and quality complete all as specified and directed.

Supply, fabrication and fixing in position aluminium composite panel (ACP) cladding of Eurobond / Alucobond /Durabuild make (colours as approved by GE) comparising of 3 mm thick Polyethelene Core sandwitched between skins of 0.50mm thick special alloyed aluminium sheet to have overall thickness of 4mm to masonary /concrete surfaces etc. including provision of aluminium frame work, fitting /fixtures for fixing of the ACP and also including structural silicon sealant to sealing of grooves etc all as per manufacturers instructions complete all as specified and directed.

S & F in repairs 8mm thick frosted toughened glass with aluminium glazing profile complete all as specified and directed.

M&L for Chequered cement concrete tiles with grey pigment cement and pigments 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

M &L 100 mm thick PCC (1:4:8) type D2 using 40mm agg as in sub base complete all as spd and directed

M& L for stainless steel 304 for kitchen trolley designer basket suitable size of cabinet,drawers and shelves opening / soft closing operation and including framing (a) stainless steel roller of size 25mm x 12mm, 505mm lenth suitable for baskets (b) Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation. (c) Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / soft closing operation.

M&L for 18/19mm thick prelaminated particle board with teak wood beading, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws for kitchen cabinets or shelves, drawers of any shape and size having particians(vertical or horizontal) including fixing with screws and fixing of all necessary fittings like hinges of any type, Handles rollers or shelves, magnets. etc. to timber in repairs complete all as specified and directed.

M&L for 2nd class hardwood moulding n. exc 6 sqcm as in cornices, picture rails and the like such as in prelaminated particle board complete all as specified and directed.

Supply only stainless steel roller of size 25mm x 12mm, 505mm length suitable for baskets complete all as specified and directed.

Supply only Magnet of suitable size fixed for cabin leafs, drawers etc,

S&F continous (piano) hinges, 40mm wide mild steel, bright finish or electro-galvanised complete all as specified and directed.

M&L for two coat plastic emulsion paint on newly putty wall and ceiling etc complete all as specified and directed.

M&L for rendering 15 mm thick in (1:4) cm mixed with liquid water proofing compound surface finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over one coat of alkai resistant primer on wall complete all as specified and directed.

Dismantling stone slabs or pcc tiles of any description or thickness in steps, landing flooring and similar work laid, bedded and pointed in cement mortar complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed.

Taking down main switches DBs with sheet metal enclosure 2/4/6/8 way SPN/TPN/DBs,Meter Boxes etc complete all as specified and directed.

Taking down of existing ceiling fans, opening / dismantling of fan& fan blades, cleaning, servicing,oiling, greasing, carrying out repairs such as replacement of capacitors, bearings, bushes, canpoy, condensor, clamp, safety pin, rubber bush and reassembling the fan & fan blades,, connecting up, testing and re-fixing of the same ceiling fan of any sweep including provision of new cable from ceiling rose/ connector to fan and spray painting of ceiling fan with two coats of synthetic enamel paint after prepartion of surfaces complete all as specified and directed

Taking down of existing Ceiling fan/exhaust fan of any sweep size AC single phase 230 Volt and deposting the same to MES store yard complete all as specified and directed

M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan/bell point controlled by one one way switch, complete all as specified and directed

All as per item No 126 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed

All as per item No 126 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed

M & L for point wiring complete with proper colour coding using 1100 volts grade, 2.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one 5Pin,6/16Amps,Socket outlet independent complete all as specified and directed

M & L for point wiring complete with proper colour coding using 1100 volts grade, 4.0 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 4.0 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for A.C Point complete all as specified and directed.

Supply & fixing ceiling rose , polycorbanate material 3 terminal complete all as specified and directed.

Supply & fixing modular fan regulator,120W- 1 module complete all as specified and directed.

Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.

Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 8 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 3 Module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 2 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 6/8 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 3 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 1/2 Module complete all as specified and directed.

Supply and fixing LED Tube Light Fitting with acrylic cover 20 watt with white light having, Lumens shall not be less than 90 Lumens/Watt, P.F >0.95,Correlated color Temp(CCT) -6500k,Driver Efficiency 88%,THD<20,Color Rendering index(CRI) > 80,Luminaries complies the BIS and ISI safety norms prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.

Supply and fixing LED Mirror Light Fitting with acrylic cover 6 watt with white light having, Lumens shall not be less than 90 Lumens/Watt, P.F >0.95,Correlated color Temp(CCT) -6500k,Driver Efficiency 88%,THD<20,Color Rendering index(CRI) > 80,Luminaries complies the BIS and ISI safety norms prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.

Supply and fixing Decorative Wall Mount LED Lamp 2N x 14 watt Warm White including with driver/bulb and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.

Supply and fixing surface mounting slim Type LED Down Light 6 watt Lumens shall not be less than 90 Lumens/Watt, P.F >0.95,Correlated color Temp(CCT) -6500k, Driver Efficiency 88%,THD<20,Color Rendering index(CRI) > 80,Luminaries complies the BIS and ISI safety norms and glare free opal difuser with aluminium body complete dismantling existing unserviceable square modular fittings all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed.

Supply & fix Wall Mounted fan 300 mm sweep, off white color 300 rpm, 230V complete with louvers, steel body/PVC, bolts, nuts, washers, suitably embedded in wall (include wall cutting for hole) with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan complete all as specified and directed.

Supply and fix Modular Type MCB SP 240 volts 25 Amps, breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed.

M&L for sub main wiring complete two run of size 4.0 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 4.0 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Three run 4 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.(From Corridor Main MCCB DB to SPN 8 Way DB's)

All as per item no.151 above but for 2 x 2.5 Sqmm + 1x 2.5 Sqmm FRLS Copper Cable complete all as specified and directed. Note: Three run 2.5 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

All as per item no.151 above but for 2 x 1.5 Sqmm + 1x 1.5 Sqmm FRLS Copper Cable complete all as specified and directed. Note: Three run 1.5 Sqmm PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.

Supply and fix in repairs sheet metal enclosure powder painted MCCB DB TPN 415 Volts 8 way double door vertical type with 200 Amps rated bus bar din rail neutral link with suitable for MCCB as incomer and concealed in wall all as specified and directed, Make : Havells cat part No-DHDLVDRWAOFO08 or equilant Legrand,Schenider.

Supply & fix sheet metal enclosure powder coated for MCB DB SPN 4 way double door with din rail and 200A bus bar rating including making good to the disurbed surface matching with the existing complete all as specified and directed.

Supply and fix MCCB 415 volts 25 KA Four pole 100 Amps fixed type complete all as specified and directed.

Supply and fix MCB TP 415 volts 25-63 Amps breaking capacity 10 KA 'B' series fixed type complete all as specified and directed.

Supply and fix MCB SPN 240 volts 40 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

Supply and fix MCB SP 240 volts 6 to 32 Amps breaking capacity 10 KA 'C' Series rating complete all as specified and directed.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 25x4 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 77,320.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

M/s Mukesh Engineers (BID ID -3161618)

PICON ENTERPRISES (BID ID -3167167)

Peerzada And Sons (BID ID -3162743)

Vishal Builders (BID ID -3161311)