AGE I CGN 34 22 23 REPAIR REPLACEMENT OF FLOOR and WALL TILING, CEMENT PLASTERING ETC AT CG NOIDA UNDER AGE I CG NOIDA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as specified and directed.

Taking down cement plaster on brick or stone walls incl raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 10mm thick rendering for backing of tiles in CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for 15mm thick Screed bed or beeding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 ( 1cement : 4 Coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3Kg of cement per sqm, top layer 15mm cement plaster 1:1/2:2(1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note: Grooves shall be paid seperately.

Forming groove of uniform size 15mm wide and 15mm deep on the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer incl removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specification and direction of the Engineer in charge.

M&L for 15 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of walls including 3mm thick wall care putty trowelled to even and smooth finish, applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for rendering 5 mm thick cement plaster in CM 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or unplastered surfaces of ceiling with putty and applying two coats of white wash on ceiling complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface with WPC and finished even and smooth without using extra cement complete all as specified and directed.

Supply liquid water proofing compound (Make : Fosroc Conplast/Nitoband SBR / Dr Fixit LW+)

M & L for Preparing new plastered or unplastered surfaces of wall and applying two coats of cement base paint over one alkali resistant priming paint complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified and directed.

M&L for Vitrified ceramic tiles light shade, 10mm thick (square/rectangular) polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc set and joint in neat cement slurry and point in coloured cement to match the shade of tile complete all as specified and directed.

M&L for Glazed coloured ceramic digital tiles 450x350 or 300x 600mm, 10mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles in designer concept with highlighter as directed by Engr-in-Charge.

S&F for anodisied aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and directed.

S&F Hangers 6mm dia GI (upto 1200m length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasterners 12.5 mm dia 40mm long complete all as specified and directed.

S&F 10mm thick multiwall (1 cell/2 wall) sandwich PVC sheet cut to shape and fixed in aluminium snap grid false ceiling complete all as specified and directed.

M&L for complete removal of existing treatment using electrical operated grinder, preparing surface to be painted with 1mm thick plaster of paris putty and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment using electrical operated grinder and applying two coats of cement based paint over a coat of alkali resistant priming complete all as specified and directed.

M/S R.S. Builders

M/s SHRI RADHEY BUILDERS

M/s Kanha Enterprise

Continental Engineers and contractors

GLIBS CONSTRUCTION

Shree Ganpati Enterprises