REPAIRS TO JOINERY, CUPBOARD AND CONNECTED WORKS IN ZONE-II AREA AT INS CHILKA UNDER GE CHILKA

Amount

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) including building hardware all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off shutters from the frames) all as specified.

Taking down shutters of any description n exc 1.00 sqm each, complete all as specified and as directed.

Taking down shutters of any description exc 1.00 but n exc 2.00 sqm each, complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails.

Taking down Shutters of any description n exc 1sqm each, complete all as specified and refixing the shutters in same opening area of each shutter n exc 1.0 Sqm complete all as specified and as directed.

Taking down shutters of any description exc. 1.00 sqm and n exc 2.00 Sqm each, complete all as specified and refixing the shutters in same opening area of each shutter exc 1.0 Sqm and n exc 2.00 Sqm complete all as specified and as directed.

Resecuring,easing and adjusting without taking down shutters of any description n exc 1.00 sqm each, complete all as specified and as directed.

Resecuring,easing and adjusting without taking down shutters of any description exc 1.00 sqm but not exceeding 2 sqm each, complete all as specified and as directed.

S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified and as directed.

S&F 2nd class hard wood, 35 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.

S&F 2nd class hardwood plain, 35mm thickness of shutter Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into sqares with plain ,with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and as directed.

S&F 2nd class hardwood plain, 35mm thickness of window and ventilator shutter Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided into sqares with plain ,with sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats all as specified and as directed.

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 2nd class hard wood, 25 mm thickness of plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats all as specified and as directed.

M&L for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F mediam weight, cold rolled mild steel butt hinges of 100 mm size, complete all as specified and as directed.

S&F in repair mediam weight, cold rolled mild steel butt hinges of 100 mm size, complete all as specified and as directed.

S&F mediam weight, cold rolled mild steel butt hinges of 75 mm size, complete all as specified and as directed.

S&F in repair mediam weight, cold rolled mild steel butt hinges of 75 mm size, complete all as specified and as directed.

S&F extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed.

S&F in repair extruded aluminium alloy handles, 150mm long fabricated type, anodised all as specified and as directed.

S&F extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.

S&F in repair extruded aluminium alloy handles, 125mm long fabricated type, anodised all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section, length of bolt 150mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 100mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section, length of bolt 100mm with dia of shoot / bolt 10mm complete all as specified and as directed.

S&F 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repair 300mm MS, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed

S&F in repair 250 mm long aluminium anodised, sliding door bolts, with haps staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts not less than 16mm dia of shoot / bolt of sxtruded section or cast aluminium alloy complete all as specified and as directed

S&F in repair stainless steel (SS-304 grade) A 200 x 19 x 1.9 mm type A friction hinges to the side/top hung in windows, of approved quality, with necessary stainless steel screws etc. as directed

S&F in repair stainless steel (SS-304 grade) B 250 x 19 x 1.9 mmmm type A friction hinges to the side/top hung in ventilation, of approved quality, with necessary stainless steel screws etc. as directed

S&F floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with rubber shoe fixed on door shutter complete all as specified and as directed.

S&F in repair floor door stopper 140mm overall length of cover plate of aluminium alloy body and tongue with rubber shoe fixed on door shutter complete all as specified and as directed.

S&F 3 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane including Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed.

S&F in repair 4 mm thickness of sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane all as specified and as directed. Make : Hindustan,Pilkinton glass works Ltd/Modiguard.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples including necessary beadings complete all as specified and as directed

S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed.

S&F in repair continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when open) 30 mm etc complete all as specified and as directed.

M&L for preparation of new painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer of approved shade complete all as specified and directed.

M&L for preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed

S&F in repair aluminium (die cast) body door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg all as specified and as directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats all as specified and as directed.

Cutting holes in brick walls n exc half brick but not exc one brick wall built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 all as specified and as directed.

Taking down cement plaster on brick or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water, etc

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 etc complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and as directed.

S&F in repairs for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed.

S&F in repair mild steel 25mm chromium plated curtain rod with fixing backets, stops, rollers etc all as specified and directed.

S&F in repairs 0.56 mm thick plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) all as specified and as directed.

M&L for 12 mm thick plywood, grade BWR, type BB, fixed with screws to timber frame work all as specified and as directed.

S&F Powder coated of any colour anodized aluminum frame (minimum thickness of powdere coating 50 micron) for door/windows/ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated of any colour (thickness of powder coating not less than 50 micron) anodised aluminium door shutters, aluminium section weighing 0.55Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified. (Note : glass and paticle board shall be measured seperatly.)

S&F powder coated of any colour aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Aluminium powder coated hinges 75 mm long (2 no.) suitable handle (2 no.) commplete all as specified and as directed. (Note : glass shall be measured seperatly.)

S&F powder coated of any colour aluminium sliding window and ventilator shutters without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium anodised fittings including locking arrangement and all accessories commplete all as specified and as directed. (Note : glass shall be measured seperatly.)

S&F 12 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination and other side balancing white lamination, fixed with screws in aluminium door complete all as specified and directed by Engineer-in-Charge.

S&F 5.5 mm thick of Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each panefixed all as specified .

S&F Aluminium anodised powder coated of any colour (thickness of powder coating not less than 15 micron) with Deco grill aperature size 50X50mm fixed with suitable channel for windows/ventelator fixing arrangements all as specified and as directed.

S&F aluminium anodised 125 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate all as specified and as directed. and fixed with screws.

S&F aluminium anodised 75 mm long Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate all as specified and as directed. and fixed with screws.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified and as directed.

S&F in repair alluminium type -II Gate and shutter, hooks and eyes 150 mm long fixed in repair all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of alluminium paint of approved shade complete all as specified and directed.

S&F in repair 2nd class hard wood small fittings such as brackets of each any type, latch and hinge blocks, shaped dooe and winkdow stops and the like, including all necessary labours, articles n.exc 200 cu.m each complete all as specified and directed.

M & L for repairing alluminium door by taking out frame if required, fixing missing screws to wall adjusting floor spring, hook joints of frame and reerecting in good working condition be necessary lubrication all as specified and as directed by Engr-in-Charge.

M & L for repairing alluminium sliding window by taking out frame if required for alignment correction fixinng missing screws to wall, replacing bearing and looking arrrangements/ friction hinges, rubber gasket, whenever required oiling and re-entering for proper sliding/ opening complete all as specified and as directed by Engr-in-Charge.

D RAVICHANDRAN (BID ID -3473436)