Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAccepted-AOC | ₹1.4 Cr | L1 | Accepted-AOC L1 bidder accepted for AOC |
| 2 | L2₹1.5 CrRejected-AOC NO 250 KRISHNARAJAPURAM COLONY MANAMADURAI SIVAGANGAI DIST 630 606 | SIVAGANGA | TAMIL NADU | 630606 | ₹1.5 Cr | L2 | Rejected-AOC L2 bidder Rejected |
| Sl No | Description | Qty | Unit | VADIVELMURUGAN S K L2 | U.P.CONSTRUCTION L1 |
|---|---|---|---|---|---|
| 1.00 | Clearing the Heavy, Light, scrub jungle , shrubs, debris, Garbage in the back yard area by deploying earth moving machine (JCB) etc., complete as directed. The Rate is inclusive of Hire charges for Machinary, Fuel and driver betta , etc., complete complying with standard specification. | 4,000 | Hrs | 12 ₹48,000 | 9 ₹36,000 |
| 2.00 | Levelling the existing ground by deploying dozzer for cutting and filling and make formation with out undulation etc., The rate inclusive of Hire charegs after machinary, fuel and driver betta, etc., complete complying with standard specification.. | 20 | Hrs | 858 ₹17,160 | 833 ₹16,660 |
| 3.00 | Earthwork excavation for foundation in all types of soil and subsoil such as hard stiff clay, stiff black cotton, hard red earth, shales, gravel earth mixed with small size boulder etc. with an initial lead of 10m and lift of 2m including refilling the sides of the foundation complying with standard specification. | 93 | M3 | 206 ₹19,158 | 200 ₹18,600 |
| 4.00 | Plain cement concrete 1:5:10 (One cement five M.sand and ten aggregates) using 40mm size HBGs jelly for foundation and basement including laid in layers not more than 15cm consolidating and including curing etc. complete as per standard specification. | 140 | M3 | 6,877 ₹9.6 L | 6,676 ₹9.3 L |
| 5.00 | Plain cement concrete 1:2:4 (one cement two M.sand four jelly)using 20mm HBS jelly of B.S.S guage for foundation and flooring including cost and conveyance of all matreials , labour etc complete, Complying with standard specification | 19 | M3 | 8,505 ₹1.6 L | 8,257 ₹1.6 L |
| 6.00 | Supply and fixing C.W wrought and put up of frames up to 4m length for fencing incluidng both side plaining charges. The rate inlcusive of cost of all materials conveyance and labour charges etc., complete as per standard specification. | 19 | M3 | 50,888 ₹9.7 L | 49,405 ₹9.4 L |
| 7.00 | Supply and fixing C.W wrought and put up of 40mm thick planks up to 4m length for fencing incluidng both side plaining charges. The rate inlcusive of cost of all materials conveyance and labour charges etc., complete as per standard specification. | 19.3 | M3 | 60,000 ₹11.6 L | 54,403 ₹10.5 L |
| 8.00 | Supply and fixing the best quality of special type SS bolt with nut 6'' size etc., complete as directed. | 6,006 | No | 32 ₹1.9 L | 29 ₹1.7 L |
| 9.00 | Painting two coats with ready mixed synthetic enamel paint of approved quality and over one coat of primer in new wood works including scrapping, cleaning the surface etc. complete as per standard specifications. | 1,939 | M2 | 264 ₹5.1 L | 256 ₹5.0 L |
| 10.00 | Supplying, Fabricating and Fixing of Stainless Steel for gate as per approved design using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance etc. complete as per standard specification. | 27 | M2 | 6,299 ₹1.7 L | 6,115 ₹1.7 L |
Tender Value
Refer Docs
EMD Value
₹1.4 L
Closing Date
18 Feb 2026, 3:00 pmClosed
Managing Director
No.2, Wallajah Road, Tourism Complex, Chennai - 2
Setting up of an Adventure and Eco-Camping Site at Ariyaman Beach, Ramanathapuram District.
2026_TTDCL_656206_1
2304-B/Engg/Proj/2022
Open Tender
Civil Works
180 days
Ariyaman
Please refer Tender documents.
11 documents required · 11 mandatory
₹0
₹1.4 L
14 Mar 2026
12 Feb 2026
18 Feb 2026
12 Feb 2026
18 Feb 2026
12 Feb 2026
Clearing the Heavy, Light, scrub jungle , shrubs, debris, Garbage in the back yard area by deploying earth moving machine (JCB) etc., complete as directed. The Rate is inclusive of Hire charges for Machinary, Fuel and driver betta , etc., complete complying with standard specification.
Levelling the existing ground by deploying dozzer for cutting and filling and make formation with out undulation etc., The rate inclusive of Hire charegs after machinary, fuel and driver betta, etc., complete complying with standard specification..
Earthwork excavation for foundation in all types of soil and subsoil such as hard stiff clay, stiff black cotton, hard red earth, shales, gravel earth mixed with small size boulder etc. with an initial lead of 10m and lift of 2m including refilling the sides of the foundation complying with standard specification.
Plain cement concrete 1:5:10 (One cement five M.sand and ten aggregates) using 40mm size HBGs jelly for foundation and basement including laid in layers not more than 15cm consolidating and including curing etc. complete as per standard specification.
Plain cement concrete 1:2:4 (one cement two M.sand four jelly)using 20mm HBS jelly of B.S.S guage for foundation and flooring including cost and conveyance of all matreials , labour etc complete, Complying with standard specification
Supply and fixing C.W wrought and put up of frames up to 4m length for fencing incluidng both side plaining charges. The rate inlcusive of cost of all materials conveyance and labour charges etc., complete as per standard specification.
Supply and fixing C.W wrought and put up of 40mm thick planks up to 4m length for fencing incluidng both side plaining charges. The rate inlcusive of cost of all materials conveyance and labour charges etc., complete as per standard specification.
Supply and fixing the best quality of special type SS bolt with nut 6'' size etc., complete as directed.
Painting two coats with ready mixed synthetic enamel paint of approved quality and over one coat of primer in new wood works including scrapping, cleaning the surface etc. complete as per standard specifications.
Supplying, Fabricating and Fixing of Stainless Steel for gate as per approved design using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance etc. complete as per standard specification.
Brickwork in Cement Mortar 1:5 (One cement and Five 'M' sand) using II Class Ground moulded chamber burnt bricks of size 9”x4 3/8” x 2 3/4” in super structure in ground floor including curing etc. complete complying with standard specification.
Plastering in Cement Mortar 1:5 (One cement and five 'M' sand) 12mm thick including curing and finishing neatly complying with standard specification and as directed.
Suppply and Filling in pathway with 10mm jelly in suitable thick layers well rammed and consolidated including watering complying with standard specifications
Supplying and laying of 83mm thick high strength type of interlocking using rubber mould for the paver blocks with design and approved colour and manufacture with concrete mix 1:1:2 using 10 to 12mm size HBG stone jelly, in required shapes and sizes having minimum compressive strength of 40N/m2 to be laid in flurrying bone pattern with approved non sticking surface at top. the rate is inclusive of levelling the site, providing 'M' Sand cushion 100mm thick grouting and also inclusive of transportation charges, loading, unloading and labour charges for laying the paver block etc. complete complying with standard specification and as directed.
Supplying, Fabrication and fixing the various size M.S hollow square pipes for vertical poles and truss work as shown sketch made out of 4''x4'' square section, 1'' x 2" rectangular section and base plate. The rate inclusive of cost of all materials, conveyance, lifiting and labour charges for welding etc., complete as directed
M.S base plate - 8mm tk
M.S hollow section 100mmx100mm x 4.5 mm
M.S hollow section 100mmx100mm x 5 mm
M.S hollow section 50mm x 75mm x x 4mm size
M.S hollow section 100mmm x 50mm x 4.5mm
Dadoing with Stone tiles (Rainbow make - L.S. Stone company) or equivalent make of approved quality, colour & size of 600mm X 150mm x 18mm with cement mortar 1:2 ,12 mm thick including pointing with colour cement. The rate inclusive of cost, conveyance of all materials and labour charge etc., complete as per standard specification.
Supplying and erecting steel centering including necessary supportsfor plane surfaces for Reinforced Cement Concrete works such ascolumn footings, column pedestals, plinth beams, grade beams,staircase steps, etc.., requiring nominal strutting using mildsteel sheets of size 90cm x 60cm and 10 BG stiffened with weldedmild steel angles of size 25mm x 25mm x 3 mm for boarding, laidover silver oak joists of size 10cm x 6.5cm spaced at about 75cmcentre to centre or at suitable intervals etc. complete in all floorscomplying with standard specifcation.
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
For circular columns
Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 Kg/m3 and maximum water cement ratio of 0.55, including admixture ( plasticiser / Super plasticiser) in recommended proportions as per IS:0103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 Kg of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 Kg of 10-12mm machine crushed stone jelly and with about(4.79cu.m) 7670Kg of sand but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc, and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, etc, complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials)
Supplying, fabricating and placing in position of TMT rods for all RCC works including cost of steel binding wire and labour charges for fabrication but excluding the cost of concrete and centering as per standard specification……...100Kg
Suppply and Filling the Gravel filling in suitable thick layers and consolidated including watering complying with standard specifications.
Supply and Filling in foundation with M. sand in 15cm thick layers well rammed and consolidated including watering complying with standard specifications.
Roofing with best quality Aluminium roofing sheet of 0.71mm thick at a spacing of not more than 0.60m c/c including cost of SS bolt with washer set of size 125mm × 6mm dia at a spacing of 0.40m c/c, including cost and conveyance of all materials to the Thiruvalluvar statue premises amidst the sea. The rate is also including ferry hire charges for the conveyance of required labours for the work as directed by the corporation officers complying with standard specification
Flooring with anti skid vitrified floor tiles of size 600mm×1200mm × 8mm approved quality and colour over a base layer of cement mortar 1:3 20mm thick including pointing the joints with the same colour cement cost and conveyance of all materials complying with standard specification......10m2
Dadoing the walls with ceramic tiles of approved quality / colour and size of 1200mm χ 600 mmχ 8mm in cement mortar 1:2 over a base plastering with cement mortar 1:5 12mm thick including pointing with same colour cement cost and conveyance of all materials complying with standard specification.
Supplying and fixing Jaquar or equivalent make White table top wash basin of size 450mm x 300mm x 120mm with all other accessories such as 15mm c.p pillar cock-1No, (jaguar FLR 5011N) -1No,15mm C.P angle cock - 1No (Jaquar con - 053KN model),-1No, 15mm heavy duty PVC connection, 32mm CP waste coupling and 32mm waste hose etc, over a SS stand as directed complying with standard specifications.
Supply and fixing in position White European Water Closet (jaquar make - model no. SLS-WHT-6851S110PP) of best quality and approved make with 100mm "P" or "s" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC with a pair of CI brackets, etc., complete with all fittings tank with a pair of CI brackets., etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adapter joined including all internal fittings, such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple - 2Nos, 15mm nylon connection, T.W plugs screw and also giving necessary connections to the PVC pipe and painting the C.I brackets with two coats of approved paint over one coat of dismantling masonry and re-doing dismantled masonry to original condition etc., complete complying with standard specifications...........1No
Supply and fixing 15mm C.P two way bib cock (Jaguar flourantine or equivalent) with 1200mm long health faucet of approved quality (Jaquar or equivalent) including cost and conveyance complying with standard specification………..1No.
Supply and fixing AC Exhaust Fan (Crompton or equivalent ) 225 mm (9") sweep (light Duty ) giving connection testing etc complete complying with standard specifiaction
Supply and fixing the frameless 5mm thick Bath Mirror (Cera or Equivalent) of size 0.50m x 0.70m with ornamental tared edges and suitable SS brackets. screws etc., complete as per standard specification.
Supply and fixing 110mm dia PVC Nahini trap with CP Square Grating size 150mm dia of approved quality (cera or equivalent) etc. complete as directed
Supplying, Laying and jointing of 20mm dia CPVC pipe of approved make and quality including fixing CPVC specials but excluding cost of CPVC specials and cutting, threading, jointing with special solution and concealing pipes into wall with necessary clamps and nails, dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed.
Supplying, laying, jointing in position of best quality various dia PVC waste pipe (6kg/cm2) of approved make and providing leak proof joints including fixing PVC specials but excluding cost of specials, dismantling masonry, RCC works wherever necessary and making good of dismantled portion complying with standard specification
50mm Dia PVC pipe
75mm Dia PVC pipe
110mm Dia PVC pipe
Supply and fixing of 375 mm (15" ) sweep ( Heavy duty) AC exhaust fan. The rate inlcusive of cost of all materials, coneveyance, labour charges etc., complete as directed.
Supply and fixing the instant dry walls using fiber cement board 'V' panel of 12mm thick with unique semi circular tongue and groove makes installation. The GI channel 1.20 mm thick (Tata/jindal make) used for top & bottom for alignment. The Rate inclusive of cost of all materials, conveyance, labour for fixing in proper alignment etc.,complete as directed.
'Supply and fixing the 10mm thick Toughned glass for roof . The rate inclusive of cost of all materials, conveynace, labour charges and nosing etc., complete as directed.
Aluminium anodised powder coated natural colour matt finish 1/3rd fixed glazing 2/3rd 4mm ACP sheet of Aluminium partition. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.
Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricatedfrom un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.
Supply and fixing of 12mm tiughened glass main entrance double door fixec with DORMA floor springs with top & bottom patch fittings with 2'6'' feet long handle as per attached drawing
Applying full putty using ready mixed wall putty of approved quality over the wall surfaces and ceiling including scrapping, cleaning, applying putty and bringing the surfaces to a smooth finish including cost of all materials and labour charges, scrapping etc. complete as directed
Painting two coats with ready mixed plastic emulsion (interior) paint of approved quality over one coat primer respectively. The rate inclusive of cost of all materials, conveyance of all materials, neat finish, etc., complete as directed.
Supplying, laying, jointing in position of best quality various dia PVC waste pipe (10kg/cm2) of approved make and providing leak proof joints including fixing PVC specials but excluding cost of specials, dismantling masonry, RCC works wherever necessary and making good of dismantled portion complying with standard specification
50mm dia PVC pipe
40mm dia PVC pipe
Supplying and fixing following sizes of PVC specials of approved quality and make etc. Complete
40mm PVC plain elbow
40mm PVC ball valve
50mm size foot valve
40mm Non returning valve
Supply and erecting the best quality of RCC 300cm dia and 45 cm height ring and lid for the same 300cm dia. The rate inclusive of cost of ring, lid, erection for labour charges, conveyance and loading and unloading etc., complete as directed.
Supply and Erection of 2 HP "TEXMO" make monobloc with 2 1/2" x 2" delivery complete acessories with suitable concrete bed with bolt & nuts, earth connection, wire connections, testing etc. complete.
Supply & errection of M.s Angle of size 50mmx50mmx6mm and required length including provission of anchorage clamp and making holes for fixing chain line fencing , errection in true alignment with necessary foundation concrete including cost and conveyance of all matreials , labour but excluding the cost of concrete etc...complete complying with standard specifaication.
Supply & welding of Weld mesh at L angles. The rate inlcusive of cost of all materials, labour charges and conveyance etc., complete as directed
Supply and fixing 2 HP Star Delta automatic starter L&T make with complete accessories on TW Board, giving wire connection, etc. complete.
Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 Amps per way with 63 A TPN MC switch with suitable trunking box MS cable entry and internal connection in suitable angle iron frame work with earth connection only.
Supply and run of 4 of 4 sqmm (56/0.3)PVC insulated SC unsheated Cu. Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour.(SD-58)
Supply and laying 3 1/2 x 50 sqmm PVC armoured LTUG aluminium cable in a trench to be excavated at a depth of 0.75 m putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good.
Supply, fabrication and erection of M.S. angle trusses using 65x65x6mm and 40x40x5mm M.S angles as raftus and purlins including provision holes, fixing cleat angle, welding charges, priming coat painting with red oxide etc. complete as directed by the corporation officers
65x65x6mm size M.S angles
40x40x5mm size M.S angles
Supply and erecting the best quality of PVC water tank 3000 Liters capacity (ISI). The rate inclusive of cost of tank, loading, un loading and conveyance etc., complete with out any damages during transit and as directed.
Supplying, Laying and jointing of 25mm dia CPVC pipe of approved make and quality including fixing CPVC specials but excluding cost of CPVC specials and cutting, threading, jointing with special solution and concealing pipes into wall with necessary clamps and nails, dismantling the wall, laying pipes and making good the dismantled portion to original condition with necessary brick work and plastering wherever necessary etc. complete as directed.
Supplying and fixing following sizes of PVC and CPVC specials of approved quality and make etc. complete.
25mm CPVC plain elbow
25mm CPVC plain tee
25mm CPVC ball valve
25mm CPVC coupler
25mm x 20mm CPVC brass tee
25mm x 20mm CPVC brass elbow
110mm size Cowl
Supply the Stone Jelly filling the RCC soak pit. The rate inlcusive of cost of all materials, conveyance etc., complete as directed.
Supply and erecting the best quality of RCC 90cm dia and 30 cm height ring and lid for the same 90cm dia. The rate inclusive of cost of ring, lid, erection for labour charges, conveyance and loading and unloading etc., complete as directed.
Supply and fixing SEPTIC TANK 75 FLUSH BR10 2450x1330x1220 OCEAN BC 4652 - SEPTIC TANK BRAND OCEAN ITEM SEPTIC TANK CATEGORY 75 FLUSH MODEL NAME BR 10 MODEL NUMBER 4652 SIZE 2450X1330X1220MM COLOR Terracotta UNIT NOS DISCRIPTION Our cost-effective Mini jumbo & jumbo septic tanks are much safe compared to the unconventional tanks since they are leak-free and hinders mosquito breeding. These tanks are designed specifically for longevity and durability. Standard Features Single LayeredEasy to CleanDurable and cost effectiveFitted with inlet and outlet provisionsAvailable in Black and Terracotta color GUARANTEE Ten years provided by the manufacturer. Need to register complaint in the manufacturer’s portal to get guarantee and service etc., coomplete as directed.
Supply and fixing of 12 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 100 A 4P MCB switch as incoming and 4 nos. 32A 3P MCB, 24 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only.
Supply and fixng of TNEB meter board suitable for 3phase 100A service connection made upof suitable angle iron frame work of size 2feetx1-1/2feet using angle iron of size 1-1/2"x1-1/2"x1/4" rigidly fixed on wall covered with hylemsheet of size 2feetx1-1/2feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3Nos. 100A fuse units (500V) ,1No .neutral link,copper earth flat of size 1"x1/4" with interconnection of EB meter to fuse units by 16 Sq.mm PVC insulated copper wire with earth connection complete
Supply and laying of 3½ x 35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
Supply and fixing of brass cable gland for 3½ x 35sqmm PVC armoured LTUG cable with earth connection etc., complete.
Supply and providing cable end termination of 3½ x 35sqmm PVCLTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil)
Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point ( 8 points / Coil)
Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)
Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion with suitable colour
Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion.
Supply and fixing of 1 x 1 feet white/warm white ceiling surface mounted fitting including giving electrical connection etc., complete.
Supply and fixing of 20W 4 Feet LED Fitting with LED including giving electrical connection etc., complete.
Supply and fixing of MIRROR Light 20W LED Batten including giving electrical connection etc., complete.
Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.
Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete without provision of hole in the wall.
Supply and fixing of 450mm (18") sweep (light duty) AC dxhaust fan complete without provision of hole in the wall.
Supply and fixing of 1500W automatic electric water heater of 35 litres capacity suitable for 230V 50c/s AC supply on suitable MS clamps with 3 core flex wire but without plumbing connection
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry.
Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection
Fabrication, Supply and erection of 250 Amps LV floor mounted distribution cubical type panel board with lock & key arrangements having the following specifications with sheet steel enclosed, Dust & Vermin proof, floor Mounting pattern, cubical type panel made out of outer 1.6mm, inner 1.2 mm sheet steel with following switch gears and phase indication LED lamps including transportation etc., complete. Incomer: 250 Amps TPN Switch – 1 No Outgoing: 63 Amps FP Switch - 6 Nos 32 Amps FP Switch - 4 Nos BUS BAR Phase : 50 x 6mm 3 run copper flat Neutral: 25 x 6mm 1 run copper flat
Supply and fixing of 250 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing.
Supply and installation of Street light feeder pillar with 63A MCB incomer and 8 Nos 32A DP MCB with sheet metal enclosure - Weather proof type with inbuilt timer control All compontents covered with Hylem sheet of 12mm thickness with necessary bolts and nuts and with earth connection complete
Supply and laying of 3½ x 70 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and fixing of brass cable gland for 3½ x 70 sqmm PVC armoured LTUG cable with earth connection etc., complete.
Supply and providing cable end termination of 3½ x 70 sqmm PVCLTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.
Supply and fixing of brass cable gland for 4 x 16 sqmm PVC armoured LTUG cable with earth connection etc., complete.
Supply and providing cable end termination of 4 x 16 sqmm PVCLTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.
supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .
Supply and Fixing of 11W Bollard Light fitting suitable to mounted on 6 inch dia GI pipe including suitable concrete foundation.
Supply and run of 25mmx3mm tinned copper flat with necessary clamps / supports on wall / floor/ ground for earth connection.
GST at 18%
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.08 MB
SingeBidDocAriyaman.pdf
Tender Documents • 0.81 MB
BOQ_786874.xls
BOQ • 3.96 MB
Download all tender documents and submit your bid