CERTAIN B/R REPAIRS TO JOINERY, TILING, FLOORING,PLUMBING,GLAZING, SANITARY WORK AND OTHER MISC WORK IN OTM ACCN OF TRG AREA OF SIKH LI REGT CENTRE AT FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L half brick thick walls built in CM 1:4 Sub Class B bricks straight or curved on plan to any radius complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 300x450x7mm thick on vertical surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 15mm thick cement plastering in cm 1:4 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed

M&L 5 mm thick cement plastering in cm 1:3 on on ceiling surfaces even and smooth without using extra cement complete all as specified

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm each not exc 4.00 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1.00 Sqm but n.exc 2.00 Sqm complete all as specified and directed.

S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing specified in ssr part -II 2020 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing specified in ssr part -II 2020 complete all as specified and directed.

MS work as in Framed work as in chowkhats of doors or gates of angle or other section with gusset plates, rails, braces, etc.,conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F 35 mm th factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood as in Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete including fixing with screws or welded to existing frames and fixing to existing door leaf complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.

S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.

S & F mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F mild steel barrel tower bolt 200mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F mild steel pressed handle oval type stove enameled black of size 150mm complete all as specified and directed.

S&F mild steel butt hinges cold rolled of size 100mm medium weight complete all as specified and directed.

S&F butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed of size 100mm type E-22 complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads etc. to steel windows/wodden doors/windows complete all as specified and directed.

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, welded tinned tacks,rivets,wooden beads, MS flats etc. to steel windows/wodden doors/windows complete all as specified and directed.

M&L preparing surfaces new of wood and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, complete all as specified and as directed.

M&L Preparing surfaces new of steel and applying two coats of synthetic enamel paint, but over a coat of red oxide zinc chrome primer complete all as specified and as directed.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. all as specified and directed

S&F in repair PVC low level flushing cistern 10ltr capacity, with cyphonic, action PVC float valve, brackets and 32mm bore PVC flush pipe etc incl PVC connection 450mm long complete all as specified and directed

M & L for two coats of Cement based paint over a coat of alkali resistant primer on new plastered wall surfaces including preparation all as specified and directed

M & L for preparation of new plastered wall surface and appling two coats of Oil bound distemper over a coat of chalk whiting complete all as specified and directed

M & L three coat of white wash on new plastered Ceiling surfaces including preparation all as specified and directed

Demolition and breaking up drain pipes 100 mm dia(Salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls or laid in floors including fixing complete all as specified and directed.

S&F 110 mm bore PVC(SWR) bend any radius complete all as specified and directed.

Dismanting of existing sunken treatment including plaster and M&L for water proofing treatment on existing sunken floor/wall with the following specification complete all as specified and directed- (a) 15mm thick (average) plaster in CM 1:3 on sunken floors and walls using WPC in as per manufacturer instruction (b) Apply one coat bituminous primer @ 0.5 Kg/ Sqm on walls and floor conforming to IS 3384-1965 on prepared surface till the surface is properly impregnated (c) Apply hot bitumen 85/25 grade @ 1.2 Kgs/Sqm confirming to IS 702-1988 (d) Laying polymeric water proofing memberance weight not less than 3.0 Kgs/Sqm as per manufacturer instructions confirming to IS (e) One spout of 40mm GI pipe length 0.45 M shall be provided in sunken floor (f) Filling of sunken floor with PCC 1:5:10 upto height directed (g) fixing of trap as per site requirement

S&F in repair Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

S&F in repair Steel Tubes Medium Grade Bore of tube in 20mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

S&F in repair Steel Tubes Medium Grade Bore of tube in 25mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.

S&F in repair 15 mm bore ,Stop valves, cast copper alloy,screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed fancytype, chromium plated with long shank and cup(concealed type)complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.

S & F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe complete all as specified an directed.

S&F in repair PTMT grating doom 100mm dia with or without waste hole etc complete all as specified and directed.

S&F in repair 15mm dia Bib tap standard of Cast Iron any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair waste pipe as in for 32mm dia urinal coupling/sink/whb etc. complete all as specified and directed.

S&F in repair 15mm dia angle stop valve standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

Taking out u/s handle of built-in cupboard shutter and S&F new handle 125mm long of cast iron/zinc CP of godrej pattern with new nut and bolt all as specified and directed

S&F in repair 100 mm Hasp and staple,mild steel,safety type,stove enamelled black, including bolt to hinge plate and welded to cupboard leaf all as specified and directed

Taking out u/s locks of built-in cupboard shutter and S&F new locks 50mm,6 lever of brass with new nut and bolts incl triple keys godrej pattern all as specified and directed

Taking out old u/s anchoring/locking rod incl fixing arrangement and S&F suitable sized anchoring rod of dia. 12mm and fixing arrangement for built-in cupboard shutter all as specified and directed

M&L for adjustment of existing shelves in the built-in cupboard shutter by providing new clamps all as specified and directed

Taking out u/s butt hinges of built-in cupboard shutter and S&F new butt hinges 65 to 75 mm long all as specified and directed

M&L for one coat of synthetic enamel paint by means of mechanical sprayer on old decorated steel surfaces complete all as specified and directed.

S & F in repairs Harrison rails of built-in cupboard, mild steel, chromium plated with fixing brackets, stops, rollers, rivets etc. Complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500 ltrs capacity and fixed in position including 20mm dia PTMT ball valve all as specified in SSR Part-I including disconnecting existing tanks all as specified and directed

S&F in repair mild steel butt hinges cold rolled of size 100mm medium weight including fixing with screws or welded to existing frames and fixing to existing door/window leaf complete all as specified and directed.

S & F in repair 100mm Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S & F in repair mild steel sliding door bolt 300mm long clip type, stove enamelled black with bright bolt not less than 16mm dia complete all as specified and directed.

S & F in repair mild steel barrel tower bolt 150 mm long, stove enameled black with bright bolts complete all as specified and directed.

S & F in repair mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate complete including fixing with screws or welded to existing frames and fixing to existing door leaf complete all as specified and directed.

Shree Gopal Engineers & Contractor

M/s Moti Babu Agarwal

M/S S P CONSTRUCTION

M/S SRI JAGDAMBE TRADERS

M/S shree traders