Repair/Maint to internal rewiring to MD Officer Accn, JCO/OR and OTM Bldg offices, stores, single Officers, JCOs Accn and Fire station and allied works at Fort Cantt Allahabad.

Amount

Taking down carefully point wiring of any type and any description / caping or concealed [light point, fan point or socket point] including removal of battens, pipes, plug sockets, switches, shades, ceiling roses, light fittings etc complete and making good disturbed surface to match the exisitng, complete all as specified and directed.

Taking down main switches, distribution boards and cut outs of any capacity along with the exisitng boards and removing the same from site and making good disturbed surface or portion of walls complete all as specified & directed.

Taking down carefully sub main wiring of any numbers of wire on wooden batten or surface conduit or concealed conduits / casing caping any type complete all as specified & directed.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 1.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring, including provision of concealed pressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc, including 1.5 sq.mm FRLS type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed for the following:-

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One bell point controlled by one bell push

(c) One 3 pin, 5 Amp socket outlet on the same board with other switches

(d) One 3 pin, 5 Amp socket outlet point on an independent board.

Point wiring complete with PVC insulated unsheatehd, 1100 volts grade cable 2.5 sq.mm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for socket outlet 15 Amps including provision of concealed opressed steel terminal box of required size not less than 1.6 mm thick factory made duly painted inside and outside with two coats of black bituminous paint over and including a coat of red oxide primer, with 3.0 mm thick top cover of plastic lmainated sheet of required colour for mounting switch, sockets, fan regulator etc, including 2.5 sq.mm FR type PVC insulated unsheathed cable multi stranded copper conductor of green colour as continuous earth wire and connected to earth dolly as required at site and including chases cutting and making good the disturbed surface and applying finishes to match the existing surface, complete all as specified and directed.

Point wiring with single core PVC (FRLS) insulated, copper conductor cables of size 1.5 Sqmm, earth lead of same specification drawing in PVC casing & caping of size not less than 25 mm wide, having wall thickness not less than 2mm with all fittings with MS/CI sunken box of wall thickness not less than 1.2 mm thick sheet including one coat of red oxide primer on internal and external surfaces covered with 3mm thick IS-2036 marked laminated sheet cover (for mounting switches, sockets, regulators , etc), complete all as specified and directed for the following:

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One bell point controlled by one bell push

(c) One 3 pin, 5 Amp socket outlet on the same board with other switches

(d) One 3 pin, 5 Amp socket outlet point on an independent board.

Point wiring with single core PVC (FRLS) insulated, copper conductor cables of size 2.5 Sqmm, earth lead of same specification for socket outlet 15 Amps drawing in PVC casing & caping of size not less than 25 mm wide, having wall thickness not less than 2mm with all fittings with MS/CI sunken box of wall thickness not less than 1.2 mm thick sheet including one coat of red oxide primer on internal and external surfaces covered with 3mm thick IS-2036 marked laminated sheet cover (for mounting switches, sockets, regulators , etc), complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn in existing PVC / Mild Steel conduit with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable of green colour, as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed for following point wirings:---

(a) One light / fan / bell / exhaust fan point, controlled by one one-way 5Amp switch

(b) One bell point controlled by one bell push

(c) One 3 pin, 5 Amp socket outlet on the same board with other switches

(d) One 3 pin, 5 Amp socket outlet point on an independent board.

Point wiring complete with 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor 1100 Volts grade, ISI marked, drawn in existing PVC / Mild Steel conduit for socket outlet 15 Amps, with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 2.5 sq.mm PVC insulated unsheathed multi-stranded FRLS copper conductor cable of green colour, as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing complete all as specified & directed.

Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit medium grade 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of PVC rigid conduit 20mm dia and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through existing conduits and accessories connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly including taking down existing sub main wiring any type and making good disturbed surfaces to match with existing including sinking of boxes , complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of PVC rigid conduit and with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Switch piano, flush type single pole, one way 5/6 Amp 240 volts, white or ivory, ISI marked, in repairs, complete all as specified and directed.

Switch piano, single pole, one way 15 Amp 240 volts, ISI marked, in repairs, complete all as specified and directed.

Switches, bell push, flush type, 5 amp, in repairs, complete all as specified and directed.

Socket outlet, 3 pin, 5/6 Amps 240 Volts, flush type, in repairs, complete all as specified and directed.

Socket outlet, 2 in 1, 3 pin, 15 Amps 240 Volts, flush type, in repairs, complete all as specified and directed.

Electric bell ding dong type AC 230 Volt 50 hz single pole, multi music type, ISI marked, in repair, complete all as specified and directed.

Ceiling rose, single phase, PVC / polycarbonate, insulated body, three terminals, surface bakelite sheet 63.5mm dia, in repairs, complete all as specified and directed.

Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, in repairs complete all as specified and directed. MAKE:- Havells / Plaza / SSK / Anchor

Lamp holder, PVC/polycarbonate body with back plate/ cord grip cap suitable for batten/ angle/ pendent fittings, in repairs complete all as specified and directed.

Modular switch 6 Amp, one-way, one module, 240V, in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand

Modular Bell push 6 Amp, one module, 240V, in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand

Modular socket outlet, 3-pin, 6 Amp, flush type, 240V, in repairs complete all as specified and directed. MAKE:- Havells / L&T / Legrand

Modular switch 15 Amp, one-way, one module, 240V, flush type, in repairs, complete all as specified and directed. MAKE:- Havells / L&T / Legrand

Modular Socket outlet, 2 in 1, 3 pin, 15 Amps 240 Volts, flush type, in repairs, complete all as specified and directed. MAKE:- Havells / L&T / Legrand

Modular type Stepped type electronic fan regulator flush type duly fixed on the existing phenolic laminated sheet etc. as required, 240V, humming free, 2 module, ISI marked, in repairs complete all as specified and directed. MAKE:- Havells / L&T/ Legrand

Modular cover plate with grid frames, 2-module, flush type, in repairs, complete all as specified and directed.

Modular cover plate with grid frames, 4-module, flush type, in repairs, complete all as specified and directed.

Modular cover plate with grid frames, 6-module, flush type, in repairs, complete all as specified and directed.

Modular cover plate with grid frames, 8-module, flush type, in repairs, complete all as specified and directed.

Recess mounted decorative LED downlight fittings of 6 Watt 6000K Lumen white powder coated pressed die cast aluminium housing with high efficiency reflector and spring mounting brackets 6500 K lumen efficiency, high brightness including suitable driver poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible copper wire three core, in repairs, complete all as specified & directed. Make : Havells Cat Part No EDGEPRORDDLR6WLED840S or techno-commercially equivalent model in Philips / Crompton / Bajaj as approved by GE

Suspended architectural LED luminaire soft light glare free symmetrical illumination (with continuous mounting caps) includng suspended conduit of suitable size for 40W LED high lumen efficiency including suitable driver ,environmental friendly, energy efficient complete with all accessories, prewired and making conection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on wall firmly, in repair, complete all as specified and directed. Make: Havells Cat part No. CONSTA1144LP40WLED830SPCWH or techno-commercially equivalent model in Philips/ Crompton as approved by GE.

LED tube light fittings 1x20 watt four feet long decorative box type [Ultra slim] linear LED [6000K] with co-extruded polycorbonate body, envoirement friendly, energy efficient prewired and making conection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2mtr, fixed on wall firmly, in repair, complete all as specified and directed.. Make : Havells E Lite Pride Plus Cat Part No LUMILINEPLUSBS20WLED865SPCSS or techno-commercially equivalent model in Philips/ Bajaj/ Crompton as approved by GE.

Aesthetically desigend LED mirror light fitting 1x10 watt LED 6500K, decorative, provided with high output PMMA diffuser for glare free light, with co-extruded polycarbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible three core copper wire or fixed to wall firmly, in repairs, complete as specified & directed. Make : Crompton Model LINNET Cart part No. LCL-10-CDL or techno-commercially equivalent model in Bajaj or Philips as approved by GE.

LED bulk head light fittings 1x10 watt having 600 Lumen enclosed in polycarbonate body, weather proof with co-extruded poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire or fixed to wall firmly, in repairs, complete all as specified & directed. Make : Havell's Cat Part No. HEXAFT10WLED857SSYMBOPC / Bajaj Model Wee Plus Cat Part No. BIBWP10LED or techno-commercially equivalent model in Crompton or Philips as approved by GE.

Building security / street LED light fitting 25 Watt IP-65 protection pressure diecast aluminium body, heat resistant glass, including driver and making necessary electric connection with 2.5 sqmm twin core copper wire 1.5m long and fixed on existing GI pipe bracket made of GI pipe 25 to 40mm light grade 1.2m long bent to shape, fixed to pole or on wall, in repairs, complete all as specified and directed. Make: Crompton Cat Part No LSTS-25-CDL or Havells Cat Part No ENDURAPEARLSL25WLED757SASYTOPCMP or any techno-commercially equivalent model in Bajaj/ Philips

Wall mounting light fittings 1x7.5 watt LED lamp (Spiral B-22 base) polycarbonate body, decorative type, un-breakable light fittings weather proof, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with 23/.0076 flexible copper wire or fixed to wall firmly, in repairs, complete all as specified & directed. Make : Havell's Cat Part No. FLORETINE WL 1LSB22 SS or any techno-commercially equivalent model in Bajaj/ Philips/ Crompton.

Recess mounted decorative CRCA LED light fittings of size 600 mm x 600 mm, 36 Watt LED 6500 K lumen efficiency, high brightness SMD leds, including suitable driver poly carbonate body, envoirement friendly, energy efficient pre-wired and making necessary electric connection from ceiling rose with flexible copper wire, in repairs, complete all as specified & directed. Make : Bajaj/ Crompton/ Philips/ Havells.

Decorative LED Post Top fitting of capacity 15W with IP-65 protection, enrgy saving and resistant to impact and corrosion, glarefree and better uniformity, envoirement friendly, energy efficient pre-wired and making necessary electric connection with flexible copper wire complete all as specified & directed. Make : Havells Cat Part No RUBYMINIPT15WLED757PSYMTOPC or techno-commercially equivalent model in Crompton / Phillips/ Bajaj as approved by GE

Sheet metal enclosure for MCB DBs TPN, 4 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands, complete all as specified and directed.

Sheet metal enclosure for MCB DBs SPN, 8 way, with IP-43 IK-09 protection, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.

Sheet metal enclosure for MCB DBs SPN, 4 way, double door, vertical type, 240 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, complete all as specified and directed.

MCB SP 5 to 40 Amp, 240 Volt, conforming to 'C' curve, 10kA breaking capacity, in repair including providing thimble for outgoing cable, complete all as specified and directed.

MCB SPN, 240 V, capacity 5-40 Amps, in repair including providing thimble for outgoing cable, complete all as specified and directed.

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp 240V, in repair, complete all as specified and directed.

Supplying, laying, jointing, commissioning & testing for 6 Sqmm 2 core XLPE cable insulated screened PVC bedded, un armoured 1100 Volts grade with standard aluminium conductor, connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire including taking down existing old cable complete all as specified & directed.

Supplying, laying, jointing, commissioning & testing for 10 Sqmm 2 core XLPE cable insulated screened PVC bedded, un armoured 1100 Volts grade with standard aluminium conductor, connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire including taking down existing old cable complete all as specified & directed.

Supplying, laying, jointing, commissioning & testing for 16 Sqmm 2 core XLPE cable insulated screened PVC bedded, un armoured 1100 Volts grade with standard aluminium conductor, connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire including taking down existing old cable complete all as specified & directed.

Duranto LED highbay 150W with fin ventilation technology for better thermal management and with cutting edge LED technology, giving electric connection and testing, in repairs, complete all as specifed and directed. Make: Havells Cat Part No. SAUCERPLUSHBP150WLED85790DTOLTG or any techno-commercially equivalent model in Bajaj/ Philips/ Crompton.

Exhaust fan 250mm sweep, white colour, plastic type, easy maintainence, quick dismantling of blades for easy cleaning performance, robust motor for continuous running of fan and giving electric connection and testing, in repairs, complete all as specifed and directed.

LED lamp 9W suitable for lamp holder, in repairs, complete all as specifed and directed. Make: Havells Cat Part No LHLDBWEB4D8R009 or any techno-commercially equivalent model in Bajaj/ Philips/ Crompton.

Taking down / out existing ceiling fan for servicing, greasing, replacement of bearing, safety pin, canopy, fan condensor, clamp, rubber reel, nut / bolts as required at site and cleaning and preparing surface, filling cavities with filler including one coat painting with synthetic enamel paint including down rod of approved white colour including marking MES number and refixing in its original position and making all electric connection, complete all as specified and directed..

Sheet metal enclosure for MCCB DBs TPN, 4 way, double door, vertical type, 415 V with 200 Amps rated bus bar, complete with incoming/ outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs, with provision of 3 pole and 4 pole MCCB as incomer and SP/TP MCB's as outgoing, in repair complete all as specified and directed.

MCCB TPN 100 Amp, 415 V, 10 kA thermal release range, in repair, complete all as specified and directed.

Replacement of wall mounted Distribution Board factory made of size 600mm x 450mm x 150mm made of MS sheet 2.0 mm thick CRCA sheet with powder coated paint ,dust and vermin proof with front openable door and locking arrangement consisting of following accessories: a) MCCB 100A, 4 pole 25kA fixed magnetic and thermal release - 01 No (incoming) b) 3 phase and neutral bus bar copper LT 440V, 200 A (outgoing) c) Phase indication lamp LED type R,Y,B

Earthing complete with GI earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 15mm dia GI pipe 'medium grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:2:4) type B-1 earth chamber and mild steel angle iron frame 25 x 25 x 6 mm and 40mm thick pre-cast RCC cover (1:2:4), type B-1 (using 20mm graded crushed aggregate) mix with 6mm dia MS bars @75mm c/c both ways, mild steel handle 12mm dia, PGI funnel and wire mesh, 20mm dia GI pipe light grade(ISI marked) for watering, etc complete all as shown in electrical plate No.5 of SSR Part-1, connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- The quoted rates shall also deemed to include the cost of Earth Test point and earth wire and protection pipe upto 7.5 metre beyond the earth plates electrode.

M S G R ENTERPRISES

ARADHYA ENTERPRISES

M/S UJJAWAL ENTERPRISES

DEV INFRATECH

R K GUPTA AND SONS

PITAMBARI TRADERS

RAMESH ENTERPRISES

SHIVAM TRADERS

Ajanta Associates

Raj Contruction

SUNNY ELECTRONICS CORPORTAION

SHAM AND SONS ENGINEERING WORKS

M/S Garg Sons