Renovation of Regional Officers 32 Rooms Rest House in the campus of Circuit House at Dumka

Amount

Earthwork in excavation in foundation trenches in ordinary soil (vide classfication of soil item - A) and disposal of excavated earth a obtained to a distance up to 50M including all lifts with leveling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design and per building specification and direction of E/I.

Providing coarse clean sand in filling in foundation trenches or in plinth including thick with all leads and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted voume)

Providing designation 75B work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.m. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials ranking out joints to 15mm depth, curing taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 75B Brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints of screening materials, scaffolding, ranking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I.

Providing designation 125mm thick reinforced designation 75A brick work in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including cost of screening, carriage of materials, raking out joints to 15mm depth curing taxes and royalty (but excluding the cost of reinforcement) all complete as building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). LINTEL

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

Providing Tor steel reinforcement of 10mm dia bars as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.

Providing Toe steel reinforcement of 12mm to 32mm dia bars as approved design and drawing excluding carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (Only Valid for SAIL & TATA STeel)

Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I.

Providing designation 75B one brick flat soiling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I

Labour for cutting old mosaic or precast terrazo tiles including cost of removing dirt, rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curring, taxes and royalty all complete as per building specification and direction of E/I.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.(Size:- 600 x 1200 mm)

Providing and laying virtified cool roof tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 154557-2007 / ISO 13006, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grounting the joints with white cement and matching pigments etc. Its solar refrective index (SRI) value should be above 78. complete Size of Tile 300x300mm x 10mm thick.

Providing 12mm thick cement plaster (1:6) -with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I. External Plaster

Providing 6mm thick cement plaster (1:4) in ceiling with coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty as per building direction of E/I.

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.

Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Making 6 x 6mm grooves in plaster surface over walls truly horizontal or vertical as specified at regular intervals, at al heights including cleaning, finishing, scaffolding and curing with all leads and lifts of water all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning and preparing the walls, scafolding, washing of floor and taxes all complete as per building specification and direction of E/l.

Labour for scrapping old paint with paint remover and blow lamp as required on wooden or steel surface including cost of all labour and materials and scaffolding all complete as per building specification and direction of E/l.

Providing primer one coat of red lead paint of approved make over steel surface including preparing the surface after cleaning removing dust, dirt. Scales amokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (mode of measurement of area shall be multiple by the co-efficient as indicated in building specification)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling plain cement or lime concrete work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling R.C.C. work including stacking serviceable materials in countable stacks within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Dismantling old plaster and plointing in cement or lime and raking out joints to 15mm depth watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down old door and window shutters including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Taking down chaukhats in doors including stacking serviceable materials within 15M,. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 250mm wide brick drain in cement mortar (1:6) with as. 150mm clear depth and 250mm apron including cost of earthwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.

Water proofing for Old and New Roof Slab :- Providing and laying water proofing treatment on roof slab by applying two Component, factory designed ready to use, acrylic modified flexible material applied with brush, roller or spray for water proofing coating as per manufacturer specifications with following steps :- (a) Surface preparation :-Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint / coating, and cement laitance by cleaning with compressed air & water jel including all materials, labour, tools complete. Ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage, leakage. On identification of seepage, cement grouting to be done with non shrink expanding admixture of Sika lndia Pvt.Ltd. / MYK Schomberg / Dr Fixit/Fosroc or equivalent. Providing and reparing of all corners and joints such as those between the parapet wall and the roof slab etc shall be chamfered with '150mm X '150 mm fillet of mortar (Cement: sand - 1:4) admixed with acrylic polymer of Sika/ Fosroc/MYK Schomberg/Dr Fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer Repairing surface irregularities, damaged concretein base slab, dead cracks if any, with an acrylic polymer modilied repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete.

(b)1st Coat :- Apply 1st coat of two component acrylic modified, ready to use, flexible cementitious material on surface saturated dry roof and inside wall of Parapet wall upto 600 mm by brush or roller. After 1st coat of application ,45 gsm oI Fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @1.50 kg/Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." (c) 2nd Coat :- To apply the 2nd coat of two component acrylic modified, ready to-use, flexible cementitious material right angle to the 1st coat over the glass fibre laid surface. 2nd coat should be applied @0.7 kg/ Sqmt/coat. For the purpose of measurement the entire treated surface will be measured." After three days of drying the 2nd coat , the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The waterproof coating to be protected from damage before screed over it. Waterproofing Brand: Sika Topseal 109hi / Fosroc Brushbond RFX/ Dr Fixit Pidiffin 2K/MYK Aquafin TG Product Performance - Chemical Base Part A. Acrylic copolymer, Part B Specially graded cementitious powder - Density 1.6 kg/l (mixed density) at +27°C Tensile Strength - 2 N/mm2 after 28 days (with Fibre cloth) (According to ASTM D 2370) Pullout Bond Strength-2 N/mm2 (concrete failure) (According to ISO 4624) Slant-Shear Bond Strength ~4N/mm2 (According to FIP 5.15) Elongation at Break ~35% without Fibre Cloth and 20% with Fibre Cloth (According to ASTM D 2370)

(d) Protection of treated surface with PCC :- The treated surface should be covered with 25mm/50mm PCC of M-20 grade(1:1.5:3) with proper slope (1:120) towards tlre rain outlets in alternate panels of 2 mlx2ml keeping 6mm gap between the panel joint. lntegral water proofing admixture conforming to lS 2645 @ of 100 ml per bag of cement to be added in the screed concrete (paid separately for this ltems).-All corners shall be chamfered vrith 150mm X 150 mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - the peripheral gaps between pvc pipe outlet and concrete surface should be packed properly with rich concrete and the peripheral mouth to be sealed with moisture insensitive epoxy putty of Sika lndia Pvt.Ltd / MYK Schomberg / Dr Fixit/Fosroc. For the purpose of measurement the entire treated surface will be measured." (e)Groove of PCC surface should be filled with Polysulphide Sealant (Paid Separately) Brand - Sika lndia Pvt Ltd / MYK Schomberg / Dr Fixit/Fosroc. Warrenty for five years.

Covering of treated surface wrth PCC :- Providing 25 mm thick Cement Concrete M20 (1:1.5:3) maintaining slope in alternate 2 mt x 2 mt panels with aaproved quality of stone chips of 20 mm to 6 mm size graded and cleaned sand of F M 2.5 io 3 including screening,shuttering,and mixing cement concrete in mixer with admixture of integral water proofing and placing in position,striking curing,taxes and royality all complete as per building specification and direction of E/l. Panels that has been left should be casted next day.-There should be 6 mm gap between Panels. Brand- Sika_Plastocrate plus,MYK proof WP10, Fosroc- Conplast X421 ic , Dr Fixit Pidiproof LW+

Providing and filling of 6mm thick Groove between 25 mm PCC Panels with Polysulphide Sealant (Poring Grade) as per drawings and technical specifications and direction of Engg in Charge (with 18% GST).Brand:-Sika Polysulphide, Fosroc-Thioflex 600 Dr. Fixit Pidiseal PS(42P),MYK Seal PS or Euivalent.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25 mm thick

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.11.41.3 Size of Tile 800x800 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surfaceto prepare the surface even and smooth complete.

Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

Providing & Applying high quality acrylic modified resin based texture of Dholpur/Red sand stone Pattern with anti algae and UV resistance properties to be applied as intermediate finish in desired pattern @ 43.04 kgs/10 sqm to form film of 1- 1.5 mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plaster surface, followed by top coating with Premium Acrylic Smooth exterior paint with Silicone additives of required shade by two or more coats @ 1.43 litres/10 sqm, complete as the direction of Engineer -in-Charge.

Supplying of Lobor for Goods Shifting in the direction of E/I.

Supplying of Carpenter for assemble and disassemble existing Furniture in the direction of E/I.

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20%

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474, including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.

Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:

Carriage of materials from source to site work including loading and unloading all complete job as per specification and direction of E/I.

Bricks - 8km (1k + 7p)

Sand - 10 km

Chips - 52 km

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600 x 450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600 x 475mm G.I. Cover with frame (weight not leaa than 36 kg) alongwith earth work in exacavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75 mm diameter

110 mm diameter

Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Coupler 75 mm

Coupler 110 mm

Single pushfit Coupler 75 mm

Single pushfit Coupler 110 mm

Single tee with door 75x75x75 mm

Single tee with door 110x110x110 mm

Single tee without door 75x75x75 mm

Single tee without door 110x110x110 mm

Bend 87.5° 75 mm

Bend 87.5° 110 mm

Shoe (Plain) 75 mm

Shoe (Plain) 110 mm

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

32 mm nominal outer dia Pipes

Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin- Charge. Internal Work- Exposed on wall

Point wiring in PVC conduit, with modular type switch - Point wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FR PVC insulated copper conductor single cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box etc. as required. Group C

Twin Control Point Wiring in PVC Conduit, with Modular type Switch: Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way modular type switch, modular plate, suitable size of GI box etc as required.

Power Plug wiring in PVC Conduit (2X4 Sq.mm) :- Wiring for light/power plug with 2x4 Sq.mm FR PVC insulated copper conductor songle core cable in surface/recessed PVC conduit along with 1 No. 4 Sq.mm FR PVC insulated copper conductor single core cable for loop earthing etc. as required.

Circuit/Sub-main wiring in PVC Conduit:- Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire(for Single Separate 5A from nearest switch board and wall fans)

2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire

4x10 Sqmm + 2x10 sqmm earth wire (For Normal TPN DB)

TV Wiring in Existing Conduit:-TV Cable in Existing Conduit: Supplying and drawing co-axial TV cable RG-6 grade copper conductor, PE insulated, with PVC sheath in the existing surface/recessed PVC conduit as required,

Telephone Wiring in Existing Conduit: Supplying and drawing, following pair, 0.5 sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required. 2 pair

S/F Modular type switch socket - Supplying and fixing following modular type switch/socket on the existing modular plate and switch box including connection but excluding modular plate etc. as required

5/6 amps, one way switch

5/6 amps, 3 pin socket outlet

Telephone socket outlet

TV antenna socket outlet

S/F Modular type electronic fan regulator:- Supplying and fixing stepped (two module) type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required.

S/F Modular Boxes, base & cover plate (Used for TV and Tele.) :-Supplying and fixing following size / modules GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module (78 mm x 78 mm x 45 mm)

S/F PVC Conduit ( for T.V. and Telephone):-Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required for Tele, T.V. 25 mm

S/F light plug point with modular type accessories - Supplying and fixing suitable size G.I. box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch connection, painting etc. as required

S/F power plug point with modular type accessories:- Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required.

S/F Ceiling Rose:- Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required.

S/F Electronic musical call bell - Supplying and fixing electronic musical call bell single phase, 230 volt, complete as required.

ITC ceiling fan - Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm. FR PVC insulated, copper conductor, single core cable etc. as required.

ITC exhaust fan upto 450 mm sweep - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.

S/F TP MCB DB:- Supplying and fixing of following way, three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (Without MCB/RCCB/ISOLATOR). 8 Ways (4+24 ways) double door

S/F 'C' series SP MCB:-Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.

6/32A Single Pole

50/63A TPN MCB

Copper earth plate elecrtode - Earthing with copper earth plate 600mmx 600mm x 3mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. as required (But without charcoal or coke and salt)

P/F 25 x 5mm copper earth strip in pipe :-Providing and fixing 25mmx5mm cpper earth strip in 40mm & 4.5Mtr long G.I.pipe for earth electrode etc. as required.

P/F G.I. lightning conductor finial - Providing and fixing of lightning conductor finial, made of 25mm dia 300mm long, G.I. tube, having single prong at top, with 85mm dia 3mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering lightning conductor tape - Reverting, sweating and soldering of copper/G.I. tape (with another copper/G.I. base of the final or any other metalic object) as required.

P/F copper lightning conductor tape in horizontal run - Providing and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

P/F copper lighning conductor tape in vertical run - Providing and fixing copper tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Providing and Fixing Testing Joint 20mm x 3 mm copper Strip : Providing & fixing of 20mmX3mm copper Strip, 125mm long with 4 nos of tinned brass bolts, nuts, check nuts and spring washers etc as required.

MV cable laying upto 185 sq.mm. in ground - Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 95 sq.mm. but not exceeding 185 sq.mm. direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

Building Outer Light (90/100W LED) :- Supply of Street lighting luminaire aerodynamically shaped single piece pressure die-cast Aluminum luminaire with high power LEDs as light source and electronic driver (IP65), along with 90/100W LED Lamp, as Energy saving as per drawing prescribed reflector and heat resistant toughened flat glass cover, with 5ft long 40mm dia G.I. pipe with 3 Nos. of iron clamps , anchor nut bolts with double washers as per direction of E/I or consultant as per drawing prescribed reflector and heat resistant toughened flat glass cover (IP-65)Make:- Jaquare / Havells/ Wipro/Baja.

Supply and Transportation of 1200mm Sweep, double ball-bearing, 2 canopy ceiling fan without regulator including connection with 1.5 sq mm copper wire, down rod all accessories as required. Make :- Bajaj / Crompton / Havells.

Supply,fitting and fixing of 12" (300mm) metal exhaust fan as per the direction of E/I.

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. as per direction of E/I.

1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.3.5 Core 120 Sq. mm. 1.1 KV XLPE Al. Ar. Cable.

Providing & fixing of White River (Stone) Pables size of 2" to 2.50" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge.

Providing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab 3.5 Core 120 Sq. mm. 1.1 KV XLPE Al. Ar. Cable.

Non Schedule

Supply, Fitting and Fixing of JAQUAR or Equivalent SHINNY-SWR PNL (1600 X 200 MM) (JPL-SSF-ST8896) in the direction of E/I.

Supply, Fitting and Fixing of TOWEL RACK 600 MM LONG JAQUAR or Equivalent (ACN-CHR- 1181FHS) in the direction of E/I.

Supply, Fitting and Fixing of SOAP DISH HOLDER JAQUAR or Equivalent (ACN-CHR-1131N) in the direction of E/I.

Supply, Fitting and Fixing of CONCEALED CISTERN W/O FLASH PLATE JAQUAR or Equivalent (JCS-WHT-2400) in the direction of E/I.

Supply, Fitting and Fixing of CONTROL PLATE JAQUAR or Equivalent (JCP-CHR-852415) in the direction of E/I.

Supply, Fitting and Fixing of RIMLESS WALL HUNG WC JAQUAR or Equivalent (VGS-WHT- 81953UF) in the direction of E/I.

Supply, Fitting and Fixing of TOILET ROLL HOLDER JAQUAR or EquivalentJAQUAR or Equivalent (ACN-CHR-1153S) in the direction of E/I.

Supply, Fitting and Fixing of 2 WAY BIB COCK JAQUAR or Equivalent (ARI-CHR-39041) in the direction of E/I.

Supply, Fitting and Fixing of HEALTH FAUCHET JAQUAR or Equivalent (ALD-CHR-573) in the direction of E/I.

Supply, Fitting and Fixing of GRAB BAR JAQUAR or Equivalent (AHS-CHR-1501) in the direction of E/I.

Supply, Fitting and Fixing of ANGULAR STOP COCK JAQUAR or Equivalent (ARI-CHR-39053) in the direction of E/I.

Supply, Fitting and Fixing of CONCEALED BODY FOR SINGLE LEVER BASIN MIXER JAQUAR or Equivalent (ALD-CHR-233N) in the direction of E/I.

Supply, Fitting and Fixing of THIN RIM TABLE TOP BASIN JAQUAR or Equivalent (SIZE-525 X 415 X 140 MM) (JDS-WHT-25907N) in the direction of E/I.

Supply, Fitting and Fixing of SINGLE LEVER BASIN MIXER JAQUAR or Equivalent (ARI-CHR- 39233N) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM WASTE COUPLING 130 MM LONG JAQUAR or Equivalent (ALD-CHR-705L130) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM BOTTLE TRAP JAQUAR or Equivalent (ALD-CHR- 769L300X190) in the direction of E/I.

Supply, Fitting and Fixing of SOAP DISPENSOR WITH METALLIC BOTTLE JAQUAR or Equivalent (CAN-CHR-1137N) in the direction of E/I.

Supply, Fitting and Fixing of TOWEL RING SQUARE SHAPE JAQUAR or Equivalent (ACN-CHR- 1121N) in the direction of E/I.

Supply, Fitting and Fixing of GLASS SHELF 600 MM LONG JAQUAR or Equivalent (ACN-CHR- 1171N) in the direction of E/I.

Supply, Fitting and Fixing of DOUBLE HOOK JAQUAR or Equivalent (ACN-CHR-1161N) in the direction of E/I.

Supply, Fitting and Fixing of 2 IN 1 WALL MIXER JAQUAR or Equivalent (FUS-CHR-29273UPR) in the direction of E/I.

Supply, Fitting and Fixing of OVERHEAD SHOWER 150 MM ROUND SHAPE JAQUAR or Equivalent (OHS-CHR-1603) in the direction of E/I.

Supply, Fitting and Fixing of SHOWER ARM 20 MM DIA & 300 MM LONG JAQUAR or Equivalent (SHA-CHR-479L300) in the direction of E/I.

Supply, Fitting and Fixing of TOWEL RAIL 600 MM LONG JAQUAR or Equivalent (ACN-CHR- 1111NM) in the direction of E/I.

Supply, Fitting and Fixing of SOAP DISH HOLDER JAQUAR or Equivalent (ACN-CHR-1131N) in the direction of E/I.

Supply, Fitting and Fixing of CONCEALED CISTERN W/O FLASH PLATE JAQUAR or Equivalent (JCS-WHT-2400) in the direction of E/I.

Supply, Fitting and Fixing of CONTROL PLATE JAQUAR or Equivalent (JCP-CHR-152415) in the direction of E/I.

Supply, Fitting and Fixing of WALL HUNG WC JAQUAR or Equivalent (OPS-WHT-15951UF) in the direction of E/I.

Supply, Fitting and Fixing of 2 WAY BIB COCK JAQUAR or Equivalent (FUS-CHR-29041) in the direction of E/I.

Supply, Fitting and Fixing of HEALTH FAUCHET JAQUAR or Equivalent (ALD-CHR-573) in the direction of E/I.

Supply, Fitting and Fixing of TOILET ROLL HOLDER JAQUAR or Equivalent(ACN-CHR-1151N) in the direction of E/I.

Supply, Fitting and Fixing of GRAB BAR JAQUAR or Equivalent (AHS-CHR-1501) in the direction of E/I.

Supply, Fitting and Fixing of TABLE TOP BASIN (SIZE-500 X 420 X 200 MM) JAQUAR or Equivalent (FNS-WHT-40931) in the direction of E/I.

Supply, Fitting and Fixing of SINGLE LEVER EXTENDED BASIN MIXER JAQUAR or Equivalent (FUS-CHR-29023B) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM BOTTLE TRAP JAQUAR or Equivalent (ALD-CHR- 769L300X190) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM WASTE COUPLING FULL THREADED JAQUAR or Equivalent (ALD-CHR-705) in the direction of E/I.

Supply, Fitting and Fixing of TOWEL RING ROUND SHAPE JAQUAR or Equivalent (ACN-CHR- 1121BN)in the direction of E/I.

Supply, Fitting and Fixing of SOAP DISPENSOR WITH GLASS BOTTLE JAQUAR or Equivalent (ACN-CHR-1135N) in the direction of E/I.

Supply, Fitting and Fixing of GLASS SHELF 600 MM LONG JAQUAR or Equivalent (ACN-CHR- 1171N) in the direction of E/I.

Supply, Fitting and Fixing of ANGULAR STOP COCK JAQUAR or Equivalent (FUS-CHR-29053) in the direction of E/I.

Supply, Fitting and Fixing of ERICA MANUAL STORAGE WATER HEATER JAQUAR or Equivalent (ERM-WHT-V025) in the direction of E/I.

Supply, Fitting and Fixing of URINAL JAQUAR or Equivalent (SIZE-340 X 320 X 650 MM) (URS- WHT-13263) in the direction of E/I.

Supply, Fitting and Fixing of URINAL SENSOR VALVE BATTERY OPERATED JAQUAR or Equivalent (SNR-STL-51063) in the direction of E/I.

Supply, Fitting and Fixing of URINAL PARTITTION CUR-450 MM JAQUAR or Equivalent (JSE- CHR-810UC450X) in the direction of E/I.

Supply, Fitting and Fixing of SINGLE PIECE WC JAQUAR or Equivalent (LYS-WHT- 38851S300UFSM) in the direction of E/I.

Supply, Fitting and Fixing of ANGULAR STOP COCK JAQUAR or Equivalent (FLR-CHR-5053N) in the direction of E/I.

Supply, Fitting and Fixing of 2 WAY BIB COCK JAQUAR or Equivalent (FLR-CHR-5041N) in the direction of E/I.

Supply, Fitting and Fixing of HEALTH FAUCHET JAQUAR or Equivalent (ALD-CHR-573) in the direction of E/I.

Supply, Fitting and Fixing of TOILET ROLL HOLDER JAQUAR or Equivalent(ACN-CHR-1151N) in the direction of E/I.

Supply, Fitting and Fixing of UNDER COUNTER BASIN JAQUAR or Equivalent (SIZE-555 X 425 X 195 MM) (FLS-WHT-5701) in the direction of E/I.

Supply, Fitting and Fixing of PILLAR COCK WITH LIFT TYPE OPERATING KNOB JAQUAR or Equivalent (FLR-CHR-5015) in the direction of E/I.

Supply, Fitting and Fixing of TOWEL RING ROUND SHAPE JAQUAR or Equivalent(ACN-CHR- 1121BN) in the direction of E/I.

Supply, Fitting and Fixing of SOAP DISPENSOR WITH GLASS BOTTLE JAQUAR or Equivalent (ACN-CHR-1135N) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM BOTTLE TRAP JAQUAR or Equivalent(ALD-CHR- 769L300X190) in the direction of E/I.

Supply, Fitting and Fixing of 32 MM WASTE COUPLING FULL THREADED JAQUAR or Equivalent (ALD-CHR-705) in the direction of E/I.

Providing MELAMINE POLISH Over wooden surface to give desired texture and gloss with with approved make and shade of ready MELAMYNE POLISH including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing and Fixing in position of Multi Wall Polycarbonate Panel System( SUNPAL OF PALRAM ),Consisting of Multi Layer Polycarbonate Panels of 10 mm Thick, Minimum Width 600 mm, Height 25.5mm(Height with Aluminium Joiner C 33mm),Maximum Sheet Length- 11.99 m, having cold bending radius of 2.40m,weight 2.60 Kg /sq m of available shade. The Polycarbonate panel will include UV Protection on both side, U- VALUE 2.10 W.m2.C., Flammability Performance of the entire system is EN13501 (DEPENDS ON PANEL THICKNESS) panels will be fitted with Aluminium Joiner C consisting of T Fastener – 0810 [10 mm] & T Stopper 0910 (10 mm) . and End Cap for Aluminium Joiner C .The fixing screws of fixing base structure will be of Self-Drilling Stainless Steel Hex Head Tapping Screws(5 x 25mm)-Part No:-1500. Fixing Method will be strictly followed as per the manufacturer Guidance.as per direction of E/I.

Supplying, installation, testing and commissioning of cubical type MV Panel made out of 16 SWG sheet steel, totally enclosed IP-54 protection, free standing, floor mounted dust and vermin proof, indoor type compartmentalized powder coated of approved shade after antirust treatment (with min seven tanks ) suitable with busbar interconnection with suitable size of copper lead/solid Aluminium strips, control circuits & bottom base channel of MS section not less than 75mmx75mmx5mm (thick), Fabrication shall be done in transportable section ,entire panel shall have a common earth busbar at rear with 2 nos earth stud cable alleys, cable gland plates in two half as required as per single line diagram & specification enclosed with the following switchgears. (Main LT panel) as per direction of E/I.

Supply and fixing Bought out Electrical Fixtures JAQUAR PRODUCTS DESCRIPTION & JAQUAR PRODUCT CODE or equivalent -AREVA ROUND 6W, 3000K-LARV01R006XW, NEVE PLUS ROUND 12W, 3000K -LNEP01R012XW,NERO SURFACE ROUND 12W,3000K- LNRO02R012SW, ESTUS SWIVEL 12W, CCT 3000K- LETS36R012XW, DECORATIVE HANGING LAMP-KCH-COP-MD150031251C, CHANDILER- KCH-CHR-MX81366B, DECORATIVE HANGING LAMP- KCH-CHR-MD160020053B1, ESTUS SWIVEL 12W, CCT 3000K- LETS36R012XW, 25 w strip light -LSTP03X005XW,STRIP DRIVER -LDRV01S030XX as per direction of E/I.

Supply and fixing KING SIZE BED Wooden splendor for your bedrooms. The Stephen king size bed is a solid wood bed with designer veneer for a warm cozy ambiance. The bed frame is constructed using German beech wood and solid wood stained in a dark oak polish. The tall headboard and footboard are inlaid with designer veneer in a box cut pattern. The top sheet is made from durian plywood and the bed frame comes with a handy storage space at the headboard. The storage units are provided access on either side with a manual pullout to stow away your bedding and pillows for the bed.Material & Subtype Solid Wood - Beech Wood Colour & Colour Family Brown - Dark Oak Dimension (L)2105mm X (W)2080mm X (H)1050mm Seating Height 325mm Legs Solid Wood Finish Matte as per direction of E/I.

Supply and fixing BED SIDE TABLE Wooden marvel. The Stephen Nighstand is a contemporary piece that matches the bed set. Made from solid wood the nighstand has a open shelf below with a drawer to stow away your personal belongings. The wooden finish and elegant design makes this a pleasing addition to your bedroom. Pair the nighstand with the Stephen bed for a complete bedrooom set. Product Details Material & Subtype Solid Wood - Beech Wood Colour & Colour Family Brown - Dark Oak Dimension (L)500mm X (D)450mm X (H)452mm Finish Matte as per direction of E/I.

Supply and fixing COFFEE TABLE SET(1+2) The Brighton coffee set is an ode to post Victorian design with a contemporary edge. The Brighton set comprises of a cafe style coffee table with two matching chairs. A warm walnut finish with solid wood construction the table sits sung on its three legs with a gorgeous central pillar base. The chairs come with the same finish and have soft fabric upholstered cushions along with slender side bolsters and a curved back that flows from the left to the right. A perfect corner awaits you with the Brighton coffee set. Product Details Material & Subtype Solid Wood - Rubber Wood Colour & Colour Family Brown - Walnut Legs Solid Wood Finish Matte Style Contemporary as per direction of E/I.

Supply and fixing STUDY CHAIR Sit fine with Adlis our decadent dining chair with Green fabric upholstered seat cushion • Contemporary design • Wooden frame • Soft foam cushion • Bottle green leatherette upholstery • Seats one person • Pair with any dining table Product Details Material & Subtype Solid Wood Colour & Colour Family Green - Bottle Green Dimension (L)560mm X (D)500mm X (H)875mm Seating Capacity 1 Seater Seating Height 430mm Legs Solid Wood Finish Matte as per direction of E/I.

Supply and fixing MANAGER TABLE SIZE:1200X600X750MM A flat linear table top in Maple with dark grey sides make this a stylish addition to the office space. The desk comes wth a Wire manager, computer tray, trolley and three drawers of varying proportions with a central lock. These are finished in the same Maple as the table top. Simple is elegance, keeping this in mind the table is ideal for seating against the wall or in a row based on your needs Product Details Material & Subtype Engineered Wood-Particle Board Colour & Colour Family White-Maple Finish Matte Size Small Style Contemporary as per direction of E/I.

Supply and fixing MEDIUM BACK REVOLVING CHAIR The Oxford is chair of pedigree. Its a classic all black chair, perfectly prim and proper with its elegant design. Soft Black Leatherette upholstery is used to encase the cushions of the back and seat. The back rest is molded to conform to the natural curvature of the spine for optimum ergonomics and lumbar support. Set on a matte black base the Oxford is one chair you cant resist. • Tilt Tension Control • Pneumatic Height Lift • Nylon Base • Push Back Mechanism Product Details Material & Subtype Leatherette Colour & Colour Family Black Dimension (W)620mm X (D)500mm X (H)990mm Maximum Seating Height 525mm Minimum Seat Height 430mm Function Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back Base Revolving

Supply and fixing VISITOR CHAIR Fixed Armrest and armrest are Padded with foam for extra comfort for your hand while relaxing.Deep cushioned back and seat conform to body contours for proper alignment, posture and all day comfort.5% post - consumed recycled content.30% total recycled content Product Details Material & Subtype Fabric Colour & Colour Family Black Dimension (W)520mm X (D)470mm X (H)930mm Maximum Seating Height 475mm Base Cantilever Frame Finish Matte Style Contemporary as per direction of E/I.

Supply and fixing U-Shape 19 SEATER CONFERENCE TABLE 25mm thik prelam particle boardtabletop with PVC edge banding. Table supported with 36mm thk prelam particle board side and 18mm thk prelam particle board modesty panel with PVC edge banding or Equivalen as per direction of E/I.

Supply and fixing HIGH BACK CONFERENCE CHAIR Adjustable armrest locks any position.Deep cushioned back and seat conforms to body contours for proper alignment, posture and all-day comfort.Quick and easy adjustment regulated the height of chair relative to the floor.Chrome base and Nylon Casters.Back height of the chair can be adjusted up and down to suit body back height.5% post-consumer recycled content.30% total recycled content. • Tilt Tension Control • Pneumatic Height Lift • Chrome Base • Push Back Mechanism Product Details Material & Subtype Premium Leatherette Colour & Colour Family Black Dimension (W)620mm X (D)490mm X (H)1240mm Seating Capacity 1 Seater Maximum Seating Height 570 mm Minimum Seat Height 460 mm Function Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back Base Chrome Base Locking Mechanism Push Back as per direction of E/I.

Supply and fixing MEDIUM BACK REVOLVING CHAIR The Oxford is chair of pedigree. Its a classic all black chair, perfectly prim and proper with its elegant design. Soft Black Leatherette upholstery is used to encase the cushions of the back and seat. The back rest is molded to conform to the natural curvature of the spine for optimum ergonomics and lumbar support. Set on a matte black base the Oxford is one chair you cant resist. • Tilt Tension Control • Pneumatic Height Lift • Nylon Base • Push Back Mechanism Product Details Material & Subtype Leatherette Colour & Colour Family Black Dimension (W)620mm X (D)500mm X (H)990mm Maximum Seating Height 525mm Minimum Seat Height 430mm Function Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back Base Revolving as per direction of E/I.

Supply and fixing CANTILEVER CHAIR FOR BACK ROW Fixed Armrest and armrest are Padded with foam for extra comfort for your hand while relaxing.Deep cushioned back and seat conform to body contours for proper alignment, posture and all day comfort.5% post - consumed recycled content.30% total recycled content Product Details Material & Subtype Fabric Colour & Colour Family Black Dimension (W)520mm X (D)470mm X (H)930mm Maximum Seating Height 475mm Base Cantilever Frame Finish Matte Style Contemporary as per direction of E/I.

Supply and fixing 3 SEATER SOFA FOR RECEPTION AREA • Trace the heritage of simple elegance with Lorraine, a contemporary Leatherett sofa. A premium offering, this sofa is constructed with a combination of solid wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leatherett upholstery is neatly stitched onto the cushions for a supple feel that grows on you. The subtle Orange allows Lorraine to sit in perfectly with almost any interior. This sofa comes in 1 seater and 2 seater formats which can be purchased as a set or as individual pieces as required. The sofa is also equipped with dual USB ports for quick easy charging for your electronic gadgets and mobiles • Contemporary styling, made for any room setting • Solid German Beech Wood Frame • Matte finish • Orange colour Leatherette • Dual USB ports • Sleek wooden legs • Seats 3 people comfortably Premium Leatherette Colour & Colour Family Orange - Tangerine Orange Dimension (L) 2020mm x (D) 905mm x (H) 850mm Add Ons Dual USB Ports Seating Capacity 3 Seater Seating Height 495mm (19.48 inch) Legs Solid Wood Finish Matte Size Standard as per direction of E/I.

Supply and fixing 2 SETER SOFA FOR RECEPTION AREA Trace the heritage of simple elegance with Lorraine, a contemporary Leather sofa. A premium offering, this sofa is constructed with a combination of solid wood and ply along with zig zag springs to give a sturdy and durable stance. Top grain Italian Leather upholstery is neatly stitched onto the cushions for a supple feel that grows on you. The subtle Beige allows Louis to sit in perfectly with almost any interior. This sofa comes in 1 seater and 3 seater formats which can be purchased as a set or as individual pieces as required. • Contemporary styling, made for any room setting • Solid German Beech Wood Frame • Matte finish • Beige colour Leatherette • Sleek wooden legs • Seats 2 people comfortably Premium Leatherette Colour & Colour Family Beige - Mushroom Beige Dimension (L)1605mm x (D)905mm x (H)850mm Seating Capacity 2 Seater Seating Height 495mm Legs Solid Wood Finish Matte Size Standard as per direction of E/I.

Supply and fixing MEDIUM BACK REVOLVING CHAIR The Oxford is chair of pedigree. Its a classic all black chair, perfectly prim and proper with its elegant design. Soft Black Leatherette upholstery is used to encase the cushions of the back and seat. The back rest is molded to conform to the natural curvature of the spine for optimum ergonomics and lumbar support. Set on a matte black base the Oxford is one chair you cant resist. • Tilt Tension Control • Pneumatic Height Lift • Nylon Base • Push Back Mechanism Product Details Material & Subtype Leatherette Colour & Colour Family Black Dimension (W)620mm X (D)500mm X (H)990mm Maximum Seating Height 525mm Minimum Seat Height 430mm Function Revolving::Pneumatic Height Lift::Tilt Tension Control::Push Back Base Revolving as per direction of E/I.

Supply and fixing VISITOR CHAIR Fixed Armrest and armrest are Padded with foam for extra comfort for your hand while relaxing.Deep cushioned back and seat conform to body contours for proper alignment, posture and all day comfort.5% post - consumed recycled content.30% total recycled content Product Details Material & Subtype Fabric Colour & Colour Family Black Dimension (W)520mm X (D)470mm X (H)930mm Maximum Seating Height 475mm Base Cantilever Frame Finish Matte Style Contemporary as per direction of E/I.

Supply and fixing CHAIR FOR RECEPTION AREA material & subtypemesh- Fabric colour & colour family black dimension (W) 595x670x1380 seating capacity 1 seater. Maximum seating height 570mm minimum seat height 470 mm Funtion revolving: Pneumatic height lift : Tilt Tension Control : Synchro single locking Basenylon Base .locking mechanism Synchro single locking finish matte stylemodern SKUMATRIX/HB/STANDARD or Equivalent as per direction of E/I.

Supply and fixing all height wall paneling of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2"x1" aluminium section, 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including all taxes and royalty all complete as per building specification and direction E/I

Supply and fixing Stone Crete light weight engineered cultured stones made with special concrete additives light weight aggregate (pumice)cement and natural colour pigments.the material is engineered to provide additional heat and sound insulation.theweight is about 70% lighter than natural Stones.Sleeper wood stone crete series 30 mm Thick, Stone Crete Country Ledge Ta series a mix of 3 (sizes.19.5"x4"11.5"x4",8"x4") as per direction of E/I.

Providing and fixing 6 mm thick Green Ply/ Green Panel on existing door shutter and Pasting with 4 mm Veneer of Green Decor Make at both side with all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing and fixing 6 mm thick Green Ply/ Green Panel on Flush door shutter and Pasting with 4 mm Veneer of Green Decor Make at both side with all material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Providing and fixing 12 mm thick plywood (Green Ply/ Green Panel) on existing door Frame and Pasting with 4 mm Veneer (Green Decor) with material and labour all complete (including all fancy type fitting) as per building specification and direction of E/I.

Supplying and installation of Sculpture glass fibre,wood stone in the Direction of E/I. (Medium :-, Size 4' to 5').

Supply and fixing Analysis for Mirror Panelling For Dressing Unit as per direction of E/I.

Supply and fixing Estimate for Reception Table as per direction of E/I.

Supply and fixing and Analysis for Estimate for Wardrobe and Study as per direction of E/I.

Supplying of Vertical Blinds wth Channel in the Direction of E/I.

Supply and fixing.Fitting Charge of Window Blinds in the Direction of E/I.

Supply and instalation of FRP Make Planter Box. in the Direction of E/I.

Providing and Displaying Devil's Ivy (Epipremnum aureum) well developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Aglaonema well developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Zamioculcas zamifolia well developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Bromeliadswell developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Philodendron developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Peace lily developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Dracaena developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Providing and Displaying Sanseveria developed fresh and healthy with good foliage, multy branch 30 to 45 cm height in 20 cm cement / plastic pot as per the Direction of E/I.

Add 12 % GST

Add 1% Labour Cess

Manish Kumar

Rhea Enterprises