REPAIRS TO KITCHEN TOILETS CLEANING OF WATER TANKS INTERNAL WATER SUPPLY SANITARY FITTINGS FLOORING AND ALLIED WORKS OF INSPECTION ORGN AT AUNDH UNDER GE MH AND RH KHADKI

Amount

Taking up or down steel tubing 15 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20 mm dia and connection including cleaning for refixing for following bore of pipe, complete all as specified and directed by Engr-in-Charge.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Re-fixing 15mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete. Note: Serviceable pipes obtained shall be re-used

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

Re-fixing 20mm bore old steel water tubing and connections in new or old position of walls, ceiling, floors etc with new fittings complete. Note: Serviceable pipes obtained shall be re-used

M & L forcutting chases, pinning in concrete block walls, making good to facing where required and pointing in cement mortar (1:3) and making good, cutting n.exc 10cm girth all as specified and directed.

Dismantling water tanks of capacity exc 250 litres but n exc 500 litres and removing to store all as specified

Dismantling water tanks of capacity exc 500 litres but n exc 1000 litres and removing to store all as specified

Dismantling water tanks of capacity exc 1000 litres but n exc 2000 litres and removing to store all as specified

Supply and fix 500 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

Supply and fix in repair 1000 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

Supply and fix in repair 2000 liters capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc complete.

S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed.

S&F in repairs 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms)

S&F in repairs 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455gms)

S & F in repairs stop valves cast copper alloy screwed down high pressure withcrutch or butterfly handle screwed both ends for iron pipe 15 mm dia all as specified and directed.

S & F in repairs PVC connection of 450 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S&F in repairs PVC waste outlet pipe for 32/40mm dia WHB complete all as specified and directed.

S&F in repairs PVC waste outlet pipe for kitchen sink complete all as specified and directed.

Cleaning the surface with wire brush, detecting sources of leakage and removing/taking down unsound treatment/surface and M&L for carring out non-destrutive waterproofing treatment to sunken portion of slab floor and walla of bath,WC,WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting etc with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers injection etc complete and as directed. The PU foam shall have 100% solids and solvent free and shall expand 30-40 times its volume at liquid stage in presence of water the PU plain injection shall have minimum 100 CPS viscocity and shore hardness minimum 50. Make :- Pidilite or equivalent make as approved by GE.

M&L making hole for fixing the metallic packer for hydrophobic PU foam and Sealer as per manufacturers specification. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. Make :- Pidilite or equivalent make as approved by GE.

M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing , cleaning the surface etc,complete all as specified and directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish outside MD land complete all as specified and as directed.

M&L Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour tile laid over and including 15 mm thick screed in CM 1:6 all as directed.

M&L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tile laid overand including 10 mm thick plastering in CM 1:4 all as specified.

M&L coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over 15 mm thick screed in CM 1:4 all as specified.

S & F Vitrified ceramic coloured tiles 10mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tile laid over and including 15 mm thick screed bed or bedding in layer in cement mortar 1:4 complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Wash basins, vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing and supply of waste pipe all as specified.

S&F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed all as specified.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to bore pipe 15mm all as specified

S&F in repairs 15mm dia bore fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed

S&F in repairs CP two way bib taps screwed for iron pipe 15 mm bore and fixed necessary fitting with and including PVC connection all as specified and directed

S&F in Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified & directed.

Taking down drain pipes (any size or pattern), including all fittings, T, bends,etc., including cleaning for refixing (measured overall as fixed along the centre line over fitting and accessories)

S&F 110 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.

S&F 110 mm dia PVC (SWR) bends any radius all as specified and directed.

S&F 110 mm bore PVC (SWR) branch pieces, single (single Y ) equal or unequal all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, fixed on walls complete all as specified.

S&F 75 mm dia PVC (SWR) bends any radius all as specified and directed.

S&F 75 mm bore PVC (SWR) branch piecs, single (single Y ) equal or unequal all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including cantilever brackets, CP waste coupling and PVC waste pipe overall size of sink 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed.

S & F in repairs Vitreous China Squatting pan Orissa pattern long pan, size 580 mmX440mm white with `P' or `S' trap, front or back inlet and foot rests any pattern including connection to trap and to flushing pipe, anti-syphonage pipe etc, including trap set in and including concrete complete including making good to floor all as spfd and directed.

S & F in repairs wash down water closet (European type) excluding fixing bolts, flushing cistern, & flush pipe but including connecting to existing out let pipe etc all as specified and directed.

S & F in repairs Plastic seat cover suitable for anglo indian EWC with hinging device all as specified and directed.

S & F in repairs Plastic seat cover to EWC with aluminium hinging device all as specified and directed.

S& F in repairs Soap dish vitirous china fixed to plugs with chromium plated brass screws complete all specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long all as specified and directed. Make : Jaguar, Cat Part No CAN -1173) or equivalent make as approved by GE

Cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 250 litre capacity and not exceeding 500 litre capacity all as specified and directed.

Cleaning and removing all scale and dirt etc from tank of any type (RCC or PVC) and from mouths of circulating pipes exceeding 500 litre capacity and not exceeding 1000 litre capacity all as specified and directed.

S & F in repairs PVC connection of 600 mm length, suitable for 15 mm bore pipe with PTMT nuts, all as specified and directed.

S&F in repairs vitreous china wash hand basin white flat back size 550x 400mm excluding taps waste chain and plug and porcelain stopper but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe all as specified and directed.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 500 liters etc including device complete.

S&F in repair PVC water tank cover with fitting suitable for tank of capacity of 1000 liters etc including device complete.

S&F in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, all as specified and directed.

S&F in repairs Chromium plated shower roses with or without swivel joints, 125mm including fixing to steel pipe or union.

Demolition stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in any mortar all as specified and directed by Engg-In-Charge.

M&L for 20 mm thick machine cut Granite slab bedded and jointed with grey cement and pointed and adhesive of pigment to match the shade including cutting and polshing as directed by Engineer-in-Charge

M&L for 20-25mm thick machine cut cuddappah stone slab laid over cement screed bed laid and jointed with grey cment slurry mixed with pigment to match the shade of the slab including grinding polishing over & including 15 mm thick screed bed or beding layer in CM 1:4 complete all as specified.

M&L for 20-25mm thick machine cut kota stone slab flooring in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over 15 mm thick screed bed or bedding in CM 1:3 for laying floor finishes, all as specified and directed.

All as item No 62 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations

S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified.

S&F in repairs health faucet brass chromium plated with connecting decorative pipe including all accessories required for fixing of 15 mm bore of pipe all as directed.

S&F in repairs bathroom cabinet mirror (of approved pattern) of size 450mmx 350mm regular size with mirror and PVC shelves complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc, all as specified and directed.

M & L for rendering 10mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 om fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5 sqm all as specified.

S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified

M & L applying two coat of oil bound distemper over a coat of primer to newly plastered surface including preparation of new plastered surfaces to wall all as specified and directed.

M & L applying three coats of white wash to newly plastered surface of ceiling including preparation.

MAHESH DADAJI BACHHAV

S.R.M.K Enterprises

V.R.PRAJAPATI AND CO.

Sunrise Traders

S M MISHRA

M/S K.D.MATE

M/S SANDEEP CONSTRUCTION COMPANY

M/S J J ENTERPRISES