E-Tenders are invited from reputed and experienced contractors/ Firms registered with J and K U.T. Government / Central Government for Construction of Ayushman Bharat Wards in the Premises of SMVDIME, Kakryal, Katra

Amount

Part - I (Civil Works)

Dismantling brick work in cement/lime upto 35 cm thickness including stacking of serviceable material and disposal of u/s material within a lead of 100 mtrs (as directed by Engineer-incharge)

Dismantling of glazed/vetrified tile up to 15 cm thick including stacking serviceable material and disposal of material up to 100 mtrs (as directed by Engineer-incharge).

Dismantling of plain cement concrete more than 15 cm thick including stacking serviceable material and disposal of material up to 100 mtrs.(as directed by Engineer-incharge)

a) Earthwork in bulk excavation in all kinds of soil by mechanical means (hydraulic excavator) over areas exceeding 30 cm in depth, 1.5 mts in width as well as 10 sqm on plan including disposal of excavated soil upto a lead of 1 km (As directed by the Engineer-Incharge).

providing and laying in position cement concrete in 1:4:8 (1cement:4 Coarse Sand :8 Crushed Stone Aggregate 40 mm nominal size) excluding cost of centering and shuttering for all works up to plinth level, including all leads and lifts complete.

providing and laying Reinforced cement concrete (1:1:2) 1cement:1coarse sand: 2 graded stone aggregate 20mm nominal size in walls (any thickness) including attached pilasters, butteresses, beams, column, slab etc upto floor five level excluding the cost of centering shuttering, finishing and reinforcement including all leads & lifts complete.

providing and laying reinforcement for RCC work including straightening, cutting, bending, placing in position and binding including cost of binding wires and all leads & lifts complete. (upto floor five level)

providing brick work with common burnt clay F.P.S (non modular) bricks of class designation 75 for all floor levels and for mounty, machine room, etc. in cement mortar 1:6 (1 Cement : 6 Coarse Sand) including all leads & lifts complete.

providing brick masonary half brick masonry with F.P.S bricks of class designation 75 for all floor levels including laying of RCC bands (M15) with nominal reinforcement at every one mtr. height of masonary in cement mortar 1:4 (1cement :4 coarse sand), including all leads & lifts complete.

Providing and fixingof formwork of timber plankings, steel plates. Plyboard sheets etc so as to give rough finish inclduing centering, shuttering, strutting, propping complete upto all levels and removal & stacking of the same, complete job.(including cost of shuttering, T&P & Sundries.) complete in all respects.

15 mm cement plaster in1:6 (1 cement : 6 fine sand) on rough side of single/half brick walls (internal plastering) including cutting grooves in junction between RCC and brick masonary at all floor levels including all leads & lifts complete including cost of material.

Applying white cement based putty of average thickness 2mm of approved brand and manufacture, over the plastered wall surface (internal & external) to prepare the surface even and smooth complete at all floors levels including all leads & lifts complete including cost of material. a) Internal Surface

Finishing wall with premium acrylic smooth interior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 ltr/10sqm over and including base coat of water proofing cement paint applied @ 2.20kg/10sqm) at all floor levels complete. As per the shades as directed by Engineer-in-charge including cost of material.

Providing and laying glazed/polished vitrified floor tiles in sizes of 600x600mm (or any size) (as per required thickness) in the pattern as approved by Engineer-Incharge laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc. complete at all floor levels including all leads & lifts complete.

Providing and Fixing of gypsum board false ceiling of papproved make of gyproc of equla make).

1.Gypsum False Ceiling

2. Modular Grid Tile 600 MM X 600 MM- False Ceiling

3. Calcium Siliocate Tile 600 MM X 600 MM =

Plumbing and Sanitary Works

Providing and fixing WC cum Bathroom fitting complete including laying of PVC/CPVC/PPR/CI/ GI/Composite Pipes and fittings inside the periphery of Toilet, fitting of taps, washbasin, washbasin mixer, European seat cistern, shower, towel rail,towel ring, looking glass, glass shelf and soap dish, geyser, gratings, angle valve etc and testing of the system complete.

Proving and Fixing Bathroom fitting complete including laying of C.I/P.V.C and G.I/PPR pipes and fitting inside the periphery of bathroom fitting of tap, towel rail and grating and testing of the system complete.

Providing and fixing Salem stainless steel A ISI 304(18/8) Kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40mm incl. Pvc flexible waste pipe, waste fittings, C.P. brass coupling and C.P. Brass grating with hole of required dia incl. Painting of fittings and brackets,cutting and making good the walls wherever required. Kitchen sink without drainboard 610x460 mm bowl depth 200 mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) popes SDR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings I/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge (concealed work including cutting chases and making good the walls etc) and External Work.

PN -16, Pipe, 25mm OD

PN -16, Pipe, 40mm OD

PN -16, Pipe, 50mm OD

PN -16, Pipe, 75mm OD

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore.

Providing and fixing of C.P. Brass soap dish of approved quality with ISI mark.

Providing and fixing of C.P. brass Towel ring of medium size.

Providing and fixing, testing & commissioning of C.P. brass wall mounted sink mixer with C.P. wall flange, overhead swinging spout complete as required and making good all necessary wall cutting / chasing complete as per direction of Engineer in Charge.

Providing and fixing, Testing & Commissioning of full way lever operated PPR Ball Valves tested to a high pressure rating (at all floors).

Providing and fixing on surface/ wall face UPVC rain and sewer pipes conforming to IS: Type A including jointing with leaving 10 mm gap for thermal expansion (i) single socketed pipes along with all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the walls and ceilings where required complete asper direction of Engineer in Charge. 110 mm outer dia ( 6 KG PRESSURE/ cm2)

Providing and fixing on surface/ wall face UPVC rain and sewer pipes conforming to IS: Type A including jointing with leaving 10 mm gap for thermal expansion (i) single socketed pipes along with all required fittings like tees, bends, crosses with or without access doors jointed with approved solvent cement as per manufacturer's recommendations, fixed to walls and ceilings with clamps complete including cutting and making good the walls and ceilings where required complete asper direction of Engineer in Charge. 200 mm outer dia ( 6 KG PRESSURE/ cm2)

Providing and fixing, jointing and testing of UPVC NANI Traps formed out of bore 'P' trap with 50 mm water seal, setting in 1:2:4 mix cement concrete block or clamping to the wall or suspending with the ceiling including cutting and making good the walls and floors wherever required. 110 mm inlet and 110 mm outlet.

Providing and fixing, jointing and testing of UPVC Bend setting in 1:2:4 mix cement concrete block or clamping to the wall or suspending with the ceiling including cutting and making good the walls and floors wherever required (at all floors). 110 mm inlet and 110 mm outlet.

Making of Main holes of different sizes including brickwork, plaster, fixing of covers, making of gola complete job including floating cost of neat cement up to septic tank.

Earthwork excavation is trenches for foundation of pipes cables etc. not exceeding 1.5 m in width and for shafts, wells, cesspits and the like exceeding 10 m2 on plain including dressing the sides and ramming of bottoms, lifts up to 1.5 mtr. including getting out the excavated soil and disposal of surplus excavated soil as directed within lead o 50 mtr.

Refilling of the excavated earth in trenches, plinth sides of foundation etc .

Providing and laying in position cement concrete in 1:4:8 (1cement:4 Coarse Sand :8 Crushed Stone Aggregate 40 mm nominal size) excluding cost of centering and shuttering for all works up to plinth level, including all leads and lifts complete.

Providing and laying plain cement concrete flooring 40 mm thick in 1:2:4 mix (1 cement:2 Coarse Sand: 4 Crushed Stone Aggregate 20 mm nominal size) without a floating coat of neat cement slurryat all floor levels including all leads & lifts complete.

Providing and fixing of form work of Timber Planking steel plates etc. including centering shuttering strutting and propping etc upto floor two level and incl. removing of the same.

Making of Khuddas for the insertion of PVC pipes through the brick work, PCC, RCC and repairing the same.

PART - II (ALUMINIUM WORKS)

ALUMINIUM TRACK 125 X 40 MM AND FRAME SECTION OF 30 X 50 MM SIZE , POWDER COATED WINDOWS WITH 6MM THICK GLASS (As per Sr. No: 01 of Annexure- D of the Bid Document)

ALUMINIUM FIXED POWDER COATED WINDOWS 50 X 63.5 MM WITH 6MM THICK GLASS (As per Sr. No: 02 of Annexure- D of the Bid Document)

SAAL WOOD DOOR FRAME/CHOWKHAT 62.5 X 125 MM WITH PAINT (As per Sr. No: 03 of Annexure -D of the Bid Document)

WOODEN FLUSH DOOR 34MM THICK WITH APPROVED LAMINATE FINISH ON BOTH SIDES WITH (GLASS VISION PANNEL 350MM X 750MM OF 6MM THICK) ON OPENABLE DOORS AND (FIRE RATED GLASS ON FIRE DOORS) (As per Sr. No: 04 of Annexure - D of the Bid Document)

Wooden Beeding 30 x 8MM on Door Frame / Chowkhat to Cover Joints Beteen the Frame and Wall (As per Sr. No: 05 of Annexure - D of the Bid Document)

Hardware

HANDLE/BAR

LOCK(DEADLATCH LOCK)

DOOR CLOSER

HINGES

KICK PLATE (D1 ONLY)

DOOR STOPPER

TOWER BOLT

DORMA BB4330 SS BALL BEARING BUT HINGE 100 X 75 X 3MM(FOR FIRE DOOR)

PUSH BAR (FOR FIRE DOOR)

DORMA CLOSER TS 68 WITH STANDARD ARM SILVER FINISH (FOR FIRE DOOR)

SCHOTT FIRE RATED CLEAR GLASS W200 X H300 (FOR FIRE DOOR)

GUARDIAN SS 304 GRADE PULL HANDLE ph1250 CTC 250 19MM DIA BLACK (FOR FIRE DOOR)

PART - III, ELECTRIFICATION WORKS Part - A: Supply, Installation, Testing and Commissioning

S. No: "A" M. V. Distribuation Boards (A-1 of Annexure - E of the Bid Document)

LIFT Panel (As mentioned in Annexure - E of the Bid Document)

Supply, Installation, Testing and Commissioning of 500V Distribution Boards (Single / Double door type) as per specificiatons at Annexure - E of the Bid Document

7-segment TPN DB's 6 way TPN DB AS per SLD (Other specificaitons mentioned in Annexure E of the Bid Document)

7-segment TPN DB's 8 way TPN DB AS per SLD (Other specificaitons mentioned in Annexure E of the Bid Document)

7-segment TPN DB's 12 way TPN DB AS per SLD (Other specificaitons mentioned in Annexure E of the Bid Document)

VTPN (Vertical TPN MCB) DB's 12 way VTPN DB AS per SLD (Other specificaitons mentioned in Annexure E of the Bid Document)

ISOLATORS Design, supply, installation, testing and commissioning of following, MCB/MCCB isolator box, wall mounted (surface) as per drawings and specifications and as required with metal enclosure. The metal box shall be of sheet steel enclosure suitable for single phase or three phase MCBs/MCCBs. All wires inside shall be terminated using copper end terminations. All isolator box shall be IP43 protected for indoor applications and IP%^ for outdoor applications

63A, 4P, 10kA, MCB ('D'-curve) in a metal enclosure (IP-56)

16A/20A/25A/32A, 4P, 10kA, MCB ('D'-curve) in a metal enclosure (IP-43)

EARTHING SYSTEM

Supply, installation, testing and commissioning of GI Pipe in Pipe earthing as per IS 3043-1987 with 80mm dia-Outer pipe and 40mm dia-Inner pipe, pipe electrode (length 3M) made out of mild steel tubes and hot dip galvanized with 100 micron coating outside and 300micron coating inside filled with high conductive and corrosion resistant crystalline mixture. The earth pit shall be filled with backfilled compound (having good enhancing material) as per standard practices and specifications. (Maintenance free copper earthing)

Supply, installation, testing and commissioning of Cu Pipe in Pipe Chemical earthing as per IS 3043 with 50mm Dia Outer Pipe, and 30mm Dia Inner Pipe, both of thickness 2mm, 3M length Electrolytic Copper Earthing Electrodes. The earth pit shall be filled with sufficient quantity Ultra High conductive backfill compound with necessary accessories like lockable Pit cover and Copper inspection plate etc, complete as required as per standard practices and specifications. (Maintenance free copper earthing)

Providing and laying earthing conductors of GI strip/wire including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. The rate shall include all supports, accessories and hardware necessary for proper installation.

25 x 6mm GI Strip

25 x 3mm GI Strip

Providing and laying earthing conductors of copper strip/wire including necessary accessories, clamping to walls, cables etc. as required and interconnection between lengths as per specifications and as per good installation practice. The rate shall include all supports, accessories and hardware necessary for proper installation.

8SWG PVC insulated Cu Wire

10SWG PVC insulated Cu Wire

M.V. Cables Supply, laying, testing and commissioning of heavy duty power cable of 1100V grade XLPE cable having Aluminium conductor, extruded Flame retardant PVC outer sheathing steel wire/tape armoured / unarmoured indoor or outdoor. The cables shall be laid in concrete trenches or buried directly underground or on cable trays. The concrete trenches will be measured separate. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. the unit cost of the cable shall include clamps, fasteners etc. as required for proper installation.

3 1/2C x 150 sq. mm, Al. Ar. XLPE Cable

3 1/2C x 95 sq. mm, Al. Ar. XLPE Cable

4C x 16 sq. mm,Al. Ar. XLPE Cable

4C x 10 sq. mm, Al. Ar. XLPE Cable

Providing & Install cable terminations for the above cables including single / double compression type chrome plated brass glands and lugs(crimping type), PVC taping as required and all accessories complete. (Upto 50sq.mm single compression & above 50sq.mm double compression Glands)

3 1/2C x 150 sq. mm, Al. Ar. XLPE Cable

3 1/2C x 95 sq. mm, Al. Ar. XLPE Cable

4C x 16 sq. mm,Al. Ar. XLPE Cable

4C x 10 sq. mm, Al. Ar. XLPE Cable

Supply, laying, testing and commissioning of heavy duty power cable of 1100V grade XLPE cable having Copper conductor, extruded Flame retardant PVC outer sheathing steel wire/tape armoured / unarmoured indoor or outdoor. The cables shall be laid in concrete trenches or buried directly underground or on cable trays. The concrete trenches will be measured separate. The cost of the cable trays or ladders, excavation and back filling of trenches will be measured separate. the unit cost of the cable shall include clamps, fasteners etc. as required for proper installation.

4C x 10 sq. mm,Cu. Ar. XLPE Cable

4C x 4 sq. mm,Cu. Ar. XLPE Cable

3C x 6 sq. mm,Cu. Cable

3C x 4 sq. mm,Cu. Cable

Providing & Install cable terminations for the above cables including single/double compression type chrome plated brass glands and lugs(crimping type), PVC taping as required and all accessories complete. (Upto 50sq.mm single compression & above 50sq.m

4C x 10 sq. mm,Cu. Ar. XLPE Cable

4C x 4 sq. mm,Cu. Ar. XLPE Cable

3C x 6 sq .mm,Cu. Cable

3C x 4 sq. mm,Cu. Cable

Supply, and installation of Perforated type powder coated with approved colour from architect cable trays with all its necessary accessories and supporting frames etc, complete as required as per site condition. Rate includes the 2Runs 25x3 GI Flat along this.

200mm wide tray(with 25x6mm MS angle & 20x4mm MS flats)

300mm wide tray(with 25x6mm MS angle & 20x4mm MS flats)

Supplying and fixing raceways of following sizes made of 1.6 mm thick Pregalvanised sheet complete with cover. The race way will be fixed to wall / ceiling/columns/floor with necessary interconnections, GI hardware to make the installation complete, including minor civil works, including mounting clamps. (Floor Raceway)

150 x 40mm Single Compartment Raceway

Supplying and fixing raceways of following sizes made of 2 mm thickPVC raceway complete with cover. The race way will be fixed to wall / ceiling/columns/floor with necessary interconnections, all hardware to make the installation complete, including minor civil works, including mounting clamps.

150 x 40mm Single Compartment Raceway

100 x 40mm Single Compartment Raceway

50 x 40mm Single Compartment Raceway

Supply & Installation of MS Flat supports with 2 coats of red oxide primer and 2 coats of paint of approved colour and with all necessary accessories as per site.

WIRING SYSTEM (ALL WIRES SHOULD BE FRLS &CONDUITS SHOULD BE FRLS)

POINT WIRING: Provide all materials, accessories, labour etc. for wiring for lights, ceiling fans, exhaust fans, 6A sockets (where 6A sockets are connected to the lighting circuit) using 1.5sqmm PVC insulated stranded copper conductor FRLS wires of 650V grade drawn through 2mm thick FRLS PVC including supply and laying of conduits and its accessories concealed in the slab/wall, surface mounted/ above false ceiling using PVC pull/junction boxes, light outlet boxes, G.I.Switch outlet boxes, switch plates, 6A/16A one or two way switches, 6A switched socket etc., including testing and commissioning complete. The rate for point wiring shall include wiring from first switch point and then looping between the points and switches. The rate shall also include the cost of providing 1no. 1.5sqmm PVC insulated copper conductor FRLS wire(earth wire) to connect all lights, switches sockets etc. (3Rx2.5Sq.mm Cu wires) (Front plate should be white colour for Raw Power and black colour for UPS)

One (1) light point controlled by a 6A modular type switch

One (1) light point controlled by two(2) no. 2 Way 6A modular type switches

Set of two (2) light points controlled by a 6A modular type switch

Set of three (3) light points controlled by a 6A modular type switch

Wiring for 6A socket outlet connected to lighting circuit and providing 6A shuttered type five pin socket outlet with switch, G.I box etc. (Dependent point where the socket is within 1metre from any other control switch/switches)

Wiring for 6A socket outlet connected to lighting / power circuit and providing 6A shuttered type five pin socket outlet with switch, G.I box etc. (Independent socket)

Wiring for 2Nos 6A socket outlet connected to lighting / power circuit and providing 2nos 6A shuttered type five pin socket outlet with separate switches, G.I box etc.

Wiring for 6A socket outlet connected to lighting / power circuit and providing 6A shuttered type five pin socket outlet with switch, G.I box etc. Switch & sockets are at different location FOR EXHAUST FAN & WALL FAN ALSO

Ceiling fan point controlled by a 6A Modular key type switch. The rate shall include providing a 2module stepped electronic fan regulator, G.I.box, fan hook etc.

LIGHTING CIRCUIT MAIN

Providing all materials, accessories and labour for wiring with conduits and accessories for light / fan circuit main using FRLS PVC insulated stranded copper conductor wires of 650V grade drawn through 2mm thick FRLS PVC conduit using necessary conduit accessories, G.I fish wire etc. The rate shall include the cost of providing PVC insulated stranded copper conductor FRLS earth wire in each conduit along with other circuit main wires. 2 x 2.5sqmm + 1 x 1.5sqmm(earth) wires in 20mm dia 2mm thick FRLS PVC conduit

POINT WIRING WITH MS CONDUIT (SURFACE MOUNTED INSIDE THE LIFT SHAFT)

POWER CIRCUIT MAIN

Providing all materials, accessories and labour for wiring with 2mm thick FRLS PVC conduit and accessories for wiring 6A sockets, 6/16A sockets, 16/20A sockets single phase sockets using PVC insulated stranded copper conductor FRLS wires of 650V grade drawn through heavy gauge rigid PVC conduit using necessary conduit accessories, PVC pull / junction boxes, G.I fish wire etc. The wiring cost shall include cost of wires, conduit and its accessories and FRLS earth wire. (The G.I outlet box and the socket will be measured separate). 2 x 4.0sqmm + 1x 2.5sqmm (earth) wires in 25mm dia 2mm thick FRLS PVC conduit.

POWER RECEPTACLES

Supply and installation of 6/16A, 5pin, combination type shuttered switched socket outlet with indicator lamp and G.I outlet box and moulded plastic cover plate as required including termination of wires.

Supply and installation of 6/16A, 5pin, combination type shuttered switched socket outlet with indicator lamp and G.I outlet box and moulded plastic cover plate as required including termination of wires. Sockets & switches are at different location for AC and Geyser.

Supply and installation of 2Nos of 6/16A, 5pin, combination type shuttered switched socket outlet with indicator lamp and G.I outlet box and moulded plastic cover plate as required including termination of wires

TELEPHONE SYSTEM

Supply and laying of 2mm thick FRLS PVC conduit with all necessary accessories like bends, collars, junction boxes, pull boxes, fish wire concealed /Surface mounting complete as required.,

32mm dia conduit

25mm dia conduit

20mm dia conduit

Supply and Installation of telephone socket outlet points (RJ11 jack) with MS box, plate concealed etc., all complete as required.

Supply and laying of outdoor multiplier 0.51mm dia annealed copper conductor of armoured PVC insulated and jelly filled telephone wires in the existing pipe/conduits etc., all complete as required. 10 Pairs Cable

Supply and laying of indoors multiplier 0.51mm dia annealed copper conductor of unarmoured PVC insulated a telephone wires in the existing raceways/conduits/ etc., all complete as required.

20 Pair cable

10 Pair cable

2 Pair cable

Supply and installation of Telephone tag block (TJB) with KRONE terminal connectors,G.I.J.B as specified and complete with all interconnections and jumper connections between the two Tag blocks on all floors complete as required.,

20Pair TJB

10Pair TJB

TV SYSTEM

Supply and laying of RG 11U tined copper co-axial cable with polythene insulation and overall PVC sheathed from various splitters to various tap offs in the existing raceway/conduits etc., all complete as required. Rate including splitter boxes.

Supply and laying of RG 6U tined copper co-axial cable with polythene insulation and overall PVC sheathed from antenna to control room and from control room to various floors splitter boxes in the existing pipe/conduits etc., all complete as required. Rate including splitter boxes.

Supply and Installation of TV socket outlet with interconnection of outlet. The cover plate of TV antenna socket outlet in a suitable box.

NETWORK AND CCTV SYSTEMS

Supply and installation of data socket (RJ 45) outlet points with MS box, plate concealed etc., all complete as required.

CAT 6 cable (quantity considered for CCTV, wifi, Data outlets and Nurse call system)

Supply and installation of 48 port Jack Panel with fully loaded - AMP

Supply installation and termination of 12U racks with all complete accessories

Supply installation and termination of 6U racks with all complete accessories

Supply and installation of EPABX suitable for 5-incoming and 20-outgoing and expandable provision in future and the rate includes all accessories hardware and software.

PA / MUSIC SYSTEM

Supply and laying of 2Cx1.0 sq.mm speaker wires with all accessories in existing conduit pipes.

Supply, installation and commissioning of 6Watts wall mounted speaker

Supply, installation and commissioning of 240Watts amplifier with USB provision, 3.5 jack provision to connect PC, MIC and mobile phones. Supply includes the MIC also. Rate includes the installation and required mounting accessories.

LIGHT FIXTURES Installation, testing and commissioning of following type of light fixtures as per drawings and specifications with all other accessories such as connectors supporting rods / frames, anchor fasteners, necessary hardware etc., complete with all accessories to complete the installation as required. THD of electronic ballast & Light fixtures should be less than 10%.

9/11W LED circular type recess mounted light fitting with acrylic diffuser

13/15W LED circular type recess mounted light fitting with acrylic diffuser

20W, LED surface Type 4-Feet Light with acrylic diffuser

32W, LED square type (2x2) recess mounted direct /indirect down light with integrated frame & full opal acrylic diffuser.

1 x 20W, Surface mounted patti type 4-feet LED Light fixture

1 x 10W, Surface mounted patti type 2-feet LED Light fixture

1 x 20W, Surface mounted patti type 4-feet LED Light fixture for mirror light.

1 x 12W, LED Type Bulk Head Light with steel wire gaurd for Lift well lighting.

1200mm sweep ceiling fan

300mm sweep exhaust fan

MISCELLANEOUS ITEMS

Providing and fixing in position the best quality danger boards of approved shape and size as specified by the local electrical authorities written in English and local language.

Providing and fixing in position 1.8m x 0.9m, 15mm thick 11kV grade, rubber mat of approved make and as required by authorities

Supply and installation of checker plates for electrical and communication ducts

Supply & Installation of MS 2-Module Back Box (Switch) in wall as surface /recessed mounted for Nurse call system. The rate includes the chipping and fixing with all necessary accessories.

NETWORK AND CCTV SYSTEMS

Supply, Installation, Testing and Commissioning of 3.2 MP lP lR Dome indoor camera with voice recording.

Supply, Installation, Testing and Commissioning of 3.2 MP lP lR Varifocal Bullet outdoor camera with voice recording.

Supply, Installation, Testing and Commissioning of 16 Ch NVR with 4 SATA

Supply, Installation, Testing and Commissioning 4 TB Surveillance HDD (Hard Disk) (Storage capacity shall be minimum lMonth)

Supply and installation of 16 port POE with fully loaded - AMP

15kVA UPS, IGBT based with isolation transformer

Design, manufacture, supply, installation, testing and commissioning of 15kVA, IGBT based UPS with isolation transformer as detailed in technical specifications with connectivity between the UPS and the battery etc., complete as required. 3 phase in & 3 Phase out / 3 phase in & single phase out, with built-in active anti-harmonic filter, (internal cabling if any) for reducing input current to < 5% and improve PF to 0.95. The same shall be suitable for parallel redundant configuration. ONLY.RS 485 Mod bus to be provided for the integration The rate shall include the cost of wiring between battery terminals and UPS with necessary mounting arrangements, hardware etc complete. Phase sequencer to be included. UPS MAKE: APC / EMERSON / NUMERIC / SOCOMEC, Schneider. BATTERY MAKE : AMARARAJA / EXIDE / AMRON

NURSE CALLING SYSTEM BOQ Supply and Installation of Micro controller based Indication wall Mount panel With the following facilities and expandable in future. The panels shall be inter linked such a way if any floor panel can give alarm to the other floor panel. The rate shall include the Nurse Response Monitor Software, installation, Communication Device with GPS Modem. • LED Display • Reset switch • Relay logic switch • Voice recording module • Mute switch • Battery management circuit • Wall mounting type enclosure • RS 485 networking chord • Code Blue Feature NCRM + GSM Set 1 2,50,000 - 2,50,000.00 - 2,50,000.00 1.1 Suitable for Emergency &

Suitable for 9 Beds with Wall / Table Mounting Panel.

Suitable for 8 Beds + 2Toilets with Wall / Table Mounting Panel.

Suitable for 6 Beds + 14Toilets with Wall / Table Mounting Panel.

Supply and Installation of Call unit with Switches & code blue like • Membrane Type Call Switches with bell indicator • LED Indicator • Membrane Type Reset Switch • Compatible for hand held call unit Mounted On Standard electrical 2 module plate near the Bed

Supply and Installation of Hand held Call unit with switches & code blue like • Membrane type call switch with bell indication • Sleek ABS Plastic moulded enclosure • Flexible chord with connector for easy installation

Supply and Installation of Call Indicator mounted outside the room mounted on standard electrical 2 module plate

Supply and Installation of Pull Card for Bath room / toilets

Ajay Kumar

Mangal Singh Saini and Sons