ADDITION/ ALTERATION AND REPAIR WORKS TO OFFICER MD ACCN P137 P173 P174 AND P175 14 QTRS AND JCO OR MD ACCN P137 P141 AND P221 13 QTRS AT MILIT GIRINAGAR PUNE

Amount

Demolition of cement Concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) and removing from site all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Demolition of Reinforced Cement Concrete like Roofs, beams (other than ground floors) beams, staircases, landings, chajjas and similar suspended work not exceeding 15cm thick and removing rubbish complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as directed.

M & L for Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and directed.

M & L for 25mm thick, PCC 1:2:4, type B-0, using 12.5mm graded stone aggregate as in sub base or levelling course complete all as specified and directed.

M & L for Vitrified Tiles, Double Charged, coloured, First Quality, area of each tile not exceeding 0.36 Sqm, 8 to 10 mm thick as in Floors, set and jointed in neat cement slurry and pointed in white after roughening the existing concrete surface or coloured cement to match including 15mm thick screed bed in cement motor 1:6 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M & L for Vitrified Tiles, Double Charged, coloured tiles and matching with adjacent floor tile, First Quality, area of each tile not exceeding 0.36 Sqm, 8 to 10 mm thick as in skirting , set and jointed in neat cement slurry and pointed in epoxy grout to match including plastring with 10 mm thick in Cement Mortar 1:4 complete all as specified and as directed. Note: The colour / shade / design of tiles shall be as approved by GE.

M&L for Coloured Non Skid Joint less ceramic tiles of grade B II a / B II b of 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed

M&L for Coloured Non Skid Joint less ceramic tiles of grade B II a / B II b of 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 10 mm thick in CM 1:4 complete all as specified and directed

M&L for Coloured Non Skid Joint less ceramic tiles of grade B II a / B II b of 7 to 8 mm thick (Square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM 1:6 complete all as specified and directed

M&L Coloured glazed ceramic tiles of grade B III size 350mmx250mmx7mm or 450mm x 300mm x 7mm thick as in verticle surfaces like dado/skirting etc. set and jointed in neat cement slurry and pointed in epoxy grout to match, including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed

M & L for Granite stone slabs of 18 to 20 mm thick as in jambs, pillars, window cills, cooking platform, treads of steps etc including making holes, granite stone slabs shall be of any colour / shade, design / pattern as directed, set and pointed with white cement 1:2 using marble dust with a admixture of pigment to match shade of granite slabs including screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, window cill and other similar situations.

Taking down door/window chowkhat with shutter [without taking off shutter from the frame] not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down door chowkhat with shutter [without taking off shutter from the frame] exceeding 1.5 Sqm but not exceeding 4.0 Sq.m each complete all as specified and as directed.

S&F Three track sliding window with 4mm thick tinted glass in two shutter and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing including good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified and directed by Engr-in-Charge. Series of aluminium section as per Jindal is (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S&F MS Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors,ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

S & F factory made pressed steel frame made out of mild steel black sheet of 1.25 mm thick of profile 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame complete all as specified and directed.

S & F factory made pressed steel frame made out of mild steel black sheet of 1.25 mm thick of profile 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges (100 and 50mm), lock strike plate etc. Complete including one shop coat of priming and threshold of 12mm dia round bar 1 nos welded at bottom of frame complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded aggregate) as in filling steel frames etc. incl necessary form work complete all as specified and directed.

M & L for 40mm thick Flush door solid core construction with veneer faced, black board core and ply wood face panels commercial type on both sides and both the faces are covered with decorative face veneer with lipping/frame to match . Bonding shall be with formaldehyde glue to ensure stronger bonding and longer life of door complete all as specified and as directed.

S & F 2nd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass,gauge,etc.edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass,etc; size of members of shutters as specified in SSR Part I Sectin 8, clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed.

S & F Stainless steel wire cloth / mesh with average aperture not exceeding 1.40 mm and dia of wire 0.36 mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and as directed.

S&F 300mm Brass ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S & F Aluminium extruded body section Door Closer Hydraulically Regulated, Designation No. 3 universal type, suitable for door shutters of 851 mm to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and as directed.

M & L for two coats of synthetic enamel paint over one coat of pink primer to newly untreated wooden surfaces over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

S&F brass sliding door bolts with sand or die cast brass hasp and staple (Bolt Type) and fixing bolt with rolled or drawin brass bolt and fixed length of bolt 300mm complete all as specified and as directed.

S & F Floor Door Stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F Brass handles, polished type of size 150mm long complete all as specified and as directed.

S&F 200mm long brass barrel tower bolts, with cast or sheet barrel and rolled and cast bolts fixed complete all as specified and as directed.

S & F Aluminium alloy anodised Sliding Door Bolt with hasp and staple [Bolt Type] of size 300 mm and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F"Aluminium anodised, barrel tower bolts of extruded section and fixed, 200mm long, complete all as specified and directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 200mm long complete all as specified and as directed.

S & F Floor Door Stopper of size 125 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed.

S & F Aluminium Powder Coated [Minimum 50 Micron thick] Sections as in Window and Ventilator Shutters, Sliding Type, without Sash Bar, Aluminium section weighing 0.55 KG / RM including necessary Joining Cleats, Glazing Clips, Neoprene Rubber Packing, Powder Coated Aluminium Snap Beading, Screws, Powder Coated Aluminium Fittings such as peg stays 150mm [1 No], hinges type B-21 100mm long[2 nos] Suitable Handle [1 No] per Shutter complete all as specified and as directed. Note: Unit rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing, fittings such as Handles,Peg stays, Hinges etc.

M & L for 4 mm thick figured glass pin head type in square exceeding 0.50 Sq.m each pane glazing with oil putty to a aluminium framed work for ventilators complete all as specified and as directed.

S&F Steel windows with side hung shutters on both sides to receive glass on one side and to receive gauge on other side including projecting type hinges with steel handle on both shutters and steel peg stay, complete with glazing bars, dovetailed or welded all as directed by Engr-in-Charge.

M&L for Steel ventilator with top hung shutter including hinges, steel peg stay complete.

M & L for 4.00 mm thick sheet glass ordinary quality in square not exceeding 0.50 Sq.m each pane glazing with beading/oil putty complete all as specified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm inlcluding 40mm waste coupling and waste pipe complete all as specified and as directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed

S&F Stainless Steel fancy type curtain rod 25mm bore complete all as specified and as directed.

S & F Stainless Steel brackets suitable for 25mm bore curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed

S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete.

S&F readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed. Make:Easy dry or equivalent.

S & F Second Class Hard Wood, plain, solid, straight Chowkats and Frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

M&L for 50mm Cupboard magnet including high quality magnet and steel plate. complete all as specified and as directed.

S&F soft close full cover 35mm dia 110degree cupboard/cabinet hinges complete fixed to particle board/wooden frame work complete.

S&F 150mm brass cupboard handles, cast type, polished bright fixed with nut screws and washers complete all as specified and directed.

S&F 125mm Hasp and staples safety type brass with mild steel hinge pin inlcuding bolt to hinge plate and fixed with screws of 125mm size complete all as specified and directed.

S&F 18mm thick, prelaminated both side cement bonded particle board are to be of wood finish teak shade and conforming to IS-142-1995, (Bison Panels by NCL group, member indian green building council). The composition of the boards comprises of approximately 60% Cement 30% plantation wood (remaining being other chemical/water binders etc.) with a density of approximately 1250-1300Kg/M3, including fixed with scews to Aluminium frame work for doors, partitions, cabinets, cupboards, etc. including screws and all screw finish with lambi etc. as per specifications. Note:- All Bison panels are fixing by self threaded machine screw, 25/38mm as per requirement. the system used together should carry a 10 years warrantee.

S&F aluminium two track sliding channel suitable for fixing of 18mm thick particle board each track complete all as specified and directed.

M & L for Hardcore of gauge not exceeding 63mm of broken stones or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick watered and rolled/rammed to a true surface and consolidated to required gradient and camber complete all as specified.

M & L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

M & L for 75mm thick, PCC 1:3:6, Type C-1, using 20mm graded aggregate as in Plinth protection etc. surface finished even and smooth with out using extra cement complete all as specified and as directed.

S & F for 302 grade stainless steel grill pattern kitchen utensils dish rack of size 39"x36"x10" deep including stainless steel drawer channels of make hettich, godrej or hafale . Dia of stainless steel bar used to make grill pattern shall be min 5mm.Fixing the items fitted in position and complete all as specified directed by Engr-in-Charge.

S & F Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed..

M&L for mirror polished Kota stone slab 20-25mm thick in Tread of steps in single pieces incl two numbers of grooves of size 3mmx3mm and rounding to edge, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 20mm thick screed in CM(1:4) complete all as specified and directed

M&L for mirror polished Kota stone slab 20-25mm thick in riser or skirting of steps in single pieces laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and mirror polishing with and incl 15mm thick rendering in CM(1:4) complete all as specified and directed

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster on brick masonry surface in two layers, base layer 10mm thick in CM (1:4) and top layer 5mm thick in CM (1:4) (with river sand) mixed with WPC as per manufacture' s instructions, finished even and fair without using extra cement complete all as specified and directed by Engineer-in-Charge. Note: WPC shall be measured and paid seperatly

M & L for rendering to fair faces of brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of brick work, stone wall or concrete surfaces in finished even and fair in CM 1:6 including rough cast plaster complete all as specified and directed.

M&L for rendering 20mm thick in CM 1:6on stone masonary surfaces in finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement including complete all as specified and as directed.

M & L for preparation of newly plastered Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Distemper oil emulsion over one of alkali resistant primer on Wall surfaces complete all as specified and as directed.

M & L for Complete removal of existing treatment of any description on Wall surfaces and applying two or more coats of Cement based Wall Care Putty of 2 mm on walls including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of Distemper oil emulsion over one of alkali resistant primer on Wall surfaces complete all as specified and as directed.

M & L for preparation of newly plastered ceiling surfaces and applying two coats of Distemper oil emulsion over one of alkali resistant primer complete all as specified and as directed.

M & L for Complete removal of existing treatment of any description on ceiling surfaces and applying two coats of Distemper oil emulsion over one of alkali resistant primer complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over new/old surfaces of walls complete all as specified and as directed NOTE: Scaffolding required for painting work, height upto 13mtr, all necesary safety measures to be taken etc.

M & L for Raking out joints/pointing to random rubble or polygonal rubble uncoursed or brought upto couses stone work built in cement or cement lime mortar including necessary scaffolding complete all as directed

M & L for Flush pointing in CM 1:3 to random rubble or polygonal rubble uncoused stone masonary wall including preparation of surface including necessary scaffolding arrangement complete all as directed

S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification, with and including making good to jambs with CM 1:4 and finished the surface to match with the existing, complete all as specified and directed.

S&F for factory made solid PVC moulded door shutter 28 to 30mm thick (sysles), with 2,4 or 6 raised panel design with 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on front face and 2mm plain colour PVC sheet on back face with particle board core as specified and directed by Engr-in-charge.

S & F 100mm long Butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

S&F"Aluminium anodised, barrel tower bolts of extruded section and fixed, 150mm long, complete all as specified and directed.

S & F Aluminium anodised Handle, of extruded section Fabricated Type of size 150mm long complete all as specified and as directed.

M&L for roughening surfaces of old concrete floor of sunken portion by picking sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry @ 3Kg/sqm complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10mm thick in CM 1:4 on concrete surfaces finished even and smooth using extra cement mixed with and approved water proofing compound @ 3% weight of cement and applying two coats of Roff Hyguard EX Rezone Chemicals, Dr Fixit Pidifin 2K complete all as specified and as directed.

M&L for PCC 1:5:10 type E-2 (using 40mm graded brick aggregate) lean concrete for filling sunken floor complete all as specified and directed.

S & F in repairs Vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm, White with integral foot rests and 'P' or 'S' trap 100 mm dia including provision of bedding and with and including PVC low level flushing cistern and flush pipe complete all as specified and as directed.

S & F in repairs Vitreous China Wash Down Water Closet [Pedestal pattern], White, including10 Ltr PVC low level flushing cistern, flush pipe and plastic water closet seat back closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and 'P' or 'S' trap and connection to trap complete including making good the distrubed surface all as specified and as directed.

S & F in repairs Vitreous china wash hand basin, white, flat back of size 550 x 400mm including PVC waste pipe 32mm dia,CP brass waste coupling 32mm dia etc, 15mm bore CP fancy type pillar tap including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed

M&L for Bottle trap chromium plated, having minimum water seal of 25mm, 32mm size with 300mm & 190mm long wall connection pipes & Wall flange complete fixed to CPVC pipe all as per directed by Engr-in-Charge.

S&F PVC (SWR) floor trap 100mm dia out let with grating including jointing with solvant cement complete all as directed.

S & F in repairs Bib tap with long body, fancy type, 15mm bore, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

S&F Stainless steel grating with ring 100mm dia complete all as directed.

S&F brass Chromium plated fancy type Toilet paper holder of fixed to walls with chromium plated (CP) brass screws all as specified and directed

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed

S&F in repairs 150mm Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

S&F brass 8mm dia ABS Chromium Plated hand shower (health faucet) with 1.2 m long flexible tube and wall hook complete all as specified and directed

S&F Chromium plated Jet Spray with CP connection pipe for EWC 15mm bore with fittings complete all as specified and directed. Make Jaguar/Cera.

S&F 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for UPVC/iron Pipe complete.

S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x160mm inlcluding 40mm waste coupling and waste pipe complete all as specified and as directed.

S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F Stainless steel bright finish Soap dish fixed to wall with Chromium plated brass screws all as specified and directed

S&F in repairs stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe of for unions of bore 15mm complete all as specified.but fancy type, chromium plated complete all as specified and as directed.

S & F in repairs Brass chromium plated tubular towel rail, 20mm dia including brackets both sides complete all as directed.

S&F brass chromium plated bracket for towel rail complete.

S&F for 40mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 40mm bore pipe on walls/ceiling or laying in floors complete. Including taking up or down steel tubing and connections or removal to store all as specified & directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors complete including taking up or down steel tubing and connections or removal to store all as specified & directed.

S&F for 16mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 16mm bore pipe on walls/ceiling or laying in floors complete. Including taking up or down steel tubing and connections or removal to store all as specified & directed.

S&F 20mm dia CPVC Ball valve complete.

Disconnecting of existing 500ltr water tanks, setting aside (or lowering if required) for repairs, cleaning etc. and hoisting if required reconnecting and refixing in new position complete.

S&F 500 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed.

S&F 1000 ltrs capacity, Rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and in position including ball brass valve 25mm high pressure with polythene float and fly nut complete including dismantling existing water tank and removing to store all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 110mm bore complete.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall, floor of size 75mm bore complete.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore complete all as specified and directed

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm borecomplete all as specified and directed

S&F PVC (SWR) bends of any radius 110mm bore complete all as specified and directed

S&F PVC (SWR) bends of any radius 75mm bore complete all as specified and directed

S&F PVC (SWR) brach piece, single (single Y) equal or unequal 110mm borecomplete all as specified and directed

S&F PVC (SWR) brach piece, single (Single Y) equal or unequal 75mm bore complete all as specified and directed

S&F PVC (SWR) brach piece, double (Double Y) equal or unequal 75mm borecomplete all as specified and directed

S&F PVC (SWR) vent cowl 110mm borecomplete all as specified and directed

S&F PVC (SWR) vent cowl 75mm borecomplete all as specified and directed

S&F PVC (SWR) gully traps 125/100mm setting and jointed in cement solvent complete all as specified and directed

Demolition of concrete of any description and in any position not otherwise specifically provided for

M & L for 40mm thick, PCC 1:2:4, type B-1, using 20mm graded stone aggregate as in floors/paving finished rough to receive cement tiles complete all as specified and directed.

M&L For cement concrete Type B1 (1:2:4) using 20mm graded stone aggregate as in kerb or mud stop rounded or champhered on edge complete all as specified and directed

M&L for rendering 10mm thick in CM 1:4 concrete surfaces duly mixed with water proofing compound @ 3% weight of cement omplete all as specified and as directed. (Note :- WPC shall be measured and paid seperately)

M & L for APP based polymeric membrane minimum weight 3 Kgs/Sqm and minimum 3 mm thick reinforced with polyster non-woven fabric ( wt not less than 150 gms/sqm laid over primed surface with bituminous primer conforming to IS- 3384 @ 0.3 litre/sqm and finishing with preventive coat with aluminium paint @ 100m/sqm all as directed and specified including cutting chases to wall and making good in CM 1:3 as in vertical surface complete.NOTE : Supply only Polyster non-woven fabric shall be measured and paid sepatly

Supply only integral water proofing compound

Supply only Recron 3s Polyester and polypropelene construction fibre, Grade 'A'

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in footing, plinth beam etc complete all as specified and directed.

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in column, pillar etc complete all as specified and directed.

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in beams, bands, cantilevers, lintels over 1.5M span complete all as specified and directed.

M & L for RCC Nominal mix 1:2:4 Type B1 using 20mm graded stone aggregate as in chajjas and like etc., complete all as specified and directed.

Use and waste of formwork to sides of concrete as in foundations, footings bases of column complete all as specified and directed.

Use and waste of formwork to sides of columns, pillars,post etc complete all as specified and directed.

Use and waste of formwork to sides and soffits of floor or roof beams, lintels and similar work for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, chajja and similar work for fair finished surfaces of concrete flat not exceeding 200mm thick complete all as specified and directed.

S & F Reinforcement using High Strength Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

S & F Reinforcement using High Strength Deformed TMT Bars of Grade Fe–500D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on new steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and as directed.

M & L for two coats of Synthetic Enamel paint over one coat of Red Oxide / Zinc Chrome Primer on old steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and as directed.

Surface excavation not exc. 30cm deep and average 15cm and getting out in soft/loose soil.

M & L for 75mm thick PCC 1:4:8, Type D-2, using 40mm graded stone aggregate as in sub base etc complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size, shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand,compacting the proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete.

M&L for coloured glossy finish chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey cement and no pigment, set and jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM 1:6 complete.

Removing of excavated soil to a distance not exc 50mtrs and depositingwhere directed at a level not exc 1.50 mtrs above the starting point complete all as specified and directed by Engr-in-charge.

Dismantling of Mild steel framed work as in gates, doors, fencing post etc. but excluding framed truss, complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 Mtr wide and not exceeding 1.5 mtr depth for foundation,laying cable etc and getting out in soft/loose soil all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation of walls, pillars, etc. or mass concrete filling in foundation complete all as specified and directed.

M & L for providing Pre- cast cement concrete block masonry 1:3:6, Type C1 withsolid blocks, exceeding10cm in width and setting in motar, complete set in CM 1:6 complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone agregrate as in coping and other similar work including weathering, slightly rounded or chamfered angles and thorating etc (Note : rate including necessary form work).

Excavating in post holes (or similar holes) each n.exc 0.50 cum gettign out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil n.exc 50m and making good the surface in hard/dense soil.

M & L for PCC 1:3:6, Type C-2, using 40mm graded stone aggregate as in sub base to Foundation, Filling, Mass Concrete, Sunken Floors etc complete all as specified and as directed.

M&L for mild steel angles as in post and struts in fencing incl cutting tops and shape as directed incl drilling holes, notching for wire etc conforming to Fe-410W (Gde E-250) etc of any description complete all as specified.

Fixing only chain link fencing including line wires, any mesh size and type and type of standards, rails, straining bolts etc including provision of binding wire all as specified.

Supply only MS galvanished chain link fencing with 3 mm dia and size 50 mm x 50 mm including line wires including strain bolts, binding wire etc all as directed.

S&F round bars 10mm dia ( Fe 410 W gde E 250) and over, cut to length, bent to shape required,including binding and welding with mild steel wire (annealed) not less than 0.9mm dia complete all as specifiedd and directed.

S&F mild steel flat iron (Fe-410-0 or Fe – 310 –0) as in bands / straps / rails for chain link fencing cut required length including necessary drilling holes for fixing bolts all as specified and directed.

M&L for mild steel bolt factory made with hexagonal or square heads at one end and screw the other to be fitted with washer etc and one hexagonal or square not exc 5cm long end dia neck 11 to 15mm etc complete all specified and directed by Engr-in-charge.

Returning filling in, well watering ramming in layers not exceeding 25cm thick complete all as directed.

Taking down carefully copper / aluminium point wiring [light, fan, socket or power] complete including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good the disturbed surfaces all as per existing complete all as specified and as directed.

Taking down sub main wiring complete including fitting and fixtures, removing materials for taking credit and making good disturbed surfaces of walls, floors, roof etc, all as specified and as directed.

Taking down carefully unserviceable DBs any type/size With MCCBs/MCBs//Isolator etc and disconnecting and making good disturbed surfaces complete all as directed.

M & L for Point Wiring complete with 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, confirming to IS - 694 drawn through and including heavy duty PVC Conduit, 20 mm dia including all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and Modular Type Pressed Metal Flush Box made out of 1.6mm thick MS Sheet of suitable size and including Modular type Base / Grid Frame & Cover Frame for housing Modular Type Switches, Sockets and Regulators etc. concealed in walls, including 1100 Volts, FRLS Grade, 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable as earth continuity conductor with colour coding and connecting to Earth Dolly for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified.

All as per item No. 164 here-in-above but for one light point controlled by 2 way switch

All as per Item No. 164 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on independent board, complete all as specified and directed.

All as per Item No. 164 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on same board complete all as specified and directed.

All as per Item No. 164 here- in- above, but for 3/5 pin 16amps socket outlet independently, with 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 and including 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

S & F Modular switch one way, 6 Amp, one module, (ISI marked), complete all as specified and directed.

S & F Modular switch Two way, 6 Amp, one module, (ISI marked), complete all as specified and directed.

S & F Switch, Modular Type, One Module, Single Pole, One Way, 16 Amps, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, 2/3 pin, 6 Amps and combained Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F Socket Outlet, 2/3 pin, 6/16 Amps and combained Modular Type, Two Modules, Multipurpose, 230 Volts complete all as specified and as directed.

S & F Ceiling Rose, Surface Bakelite, 65 X 50 mm, Three Terminals, 230 Volts complete all as specified and as directed.

S & F Electronic Fan Regulator, Stepped Type, Modular Type, Two Module, 100 W, AC, 230 Volts, Single Pole complete all as specified and as directed.

S & Fix lamp holder PVC type with back plate suitable for lamp holder fitting complete all as specified and as directed.

S & Fix Bell push modular type SP 6 Ampscomplete all as specified and as directed.

S & Fix call bell (Ding Dong) 240 V, 50 Hz complete all as specified and as directed.

S & Fix LED Batten suitable for mount LED tube rod 1 x 18 watts including necessary electric connections with flexible copper cable 23/0.0076 from ceiling rose to tube light fitting complete all as specifed and directed by Engineer-in-charge.

S & Fix LED tube light rod 18 watts with necessary fixing arrangement etc complete all as specifed and directed by Engineer-in-charge.

S & Fix Batten for LED tube light fitting 10 W complete accessories all as specified and directed by Engr-in- charge.

S & Fix LED street light 25 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and bracket, nut,bolt,clamp etc complete all accessories and fixing arrengenment all as specified and directed by Engr-in-charge.

S & Fix LED street light 30 W CUB type building security light pressure die cast aluminium housing LED street light lumaniries with IP 65 and bracket, nut,bolt,clamp etc complete all accessories and fixing arrengenment all as specified and directed by Engr-in-charge.

Taking down and refixing of Ceiling fan/Exhaust Fan any size/sweep, including oiling, Greasing and cleaning and applying two coats of synthetic enameled paint after preparation of surface complete over a coat of primer.

S & F PVC Exhaust fan with louvers shutters, heavy duty, single phase suitable for 230volts, 1400 RPM, 50HZ of 250mm sweep complete including provision of 3 core flexible copper cable of suitable size from ceiling rose to fan and fixing arrangement including grouting of bolts in wall, etc complete all as specified and directed.

S & F Metal body Exhaust fan with louvers shutters, heavy duty, single phase suitable for 230volts, 1400 RPM, 50HZ of 250mm sweep complete including provision of 3 core flexible copper cable of suitable size from ceiling rose to fan and fixing arrangement including grouting of bolts in wall, etc complete all as specified and directed.

Taking down the existing unserviceable storage type electric water heater (Geyser) of capacity 25 Litersof any make/type after disconnecting electrical & water and supply connections examin & carry out the servicing/overhauling/ Painting the geyser by thoroughly cleaning the tank, thermostat, heating element and testing in all respect for smooth running and refixing complete all as directed.

S & Fix water heater storage type, electric capacity 25 liters BEE 5 Star rated and bracket, nut,bolt,clamp, fasner etc, complete all accessories and fixing arrengenment complete all as directed.

S & Fix of MCCB DB VTPN 4 ways,with metal double door ,IP -43 protection suitable for MCCB as incommer and MCB as out going,VTPN DB's 415 volt 3 phase complete with 200A rated copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall/surface all as required at site i.e directed by Engr-in charge.

S&F MCCB 63Amp capacity, FP, 415Volt grade, rupturing capacity 16kA, with adjustable thermal and magnetic setting, including making incoming and outgoing connections using copper thimbles / lugs of appropriate size, complete all as specified.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated triple pole & Neutral 4 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including making good distrubed surface complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board double door, powder coated Single pole & Neutral 8 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCB DB complete all as specified and directed.

Supply and fix sheet metal enclosure for pre wired MCB distribution board single door, powder coated Single pole & Neutral 2 way , 240 volts, single phase with 200 Amps rated tinned electrolytic copper bus bar with neutral link including taking down old MCB DB complete all as specified and directed.

S&F of MCB SPN 240 Volts, 'C' series, rupturing capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed.

S&F of MCB SP 240 Volts, 'C' series, rupturing capacity 10 KA of rating 6 to 32 Amps complete all as specified and as directed.

Supply and fix single pole and neutral sheet matel enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Capacity complete all as specified and directed.

S&F of MCB TPN 240 Volts, 'C' series, 32A to 63 Amps complete all as specified and as directed.

Taking down the existing electric meter of any capacity and make after disconnecting electrically and carry out the cleaning and refixing, reconnecting including applying one coat of paint on existing MS box of electric meter, testing in all respect for smooth running completeall as directed.

M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC casing and caping/conduit with all accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of PVC casing and caping accessories will be measured as one unit.

M & L for Sub main wiring with 2 runs of single core 1.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts with colour code , FRLS Grade, ISI Marked, drawn through and including suitable size of PVC conduit with its accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 1.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 1.5 Sq.mm & one run of PVC conduit along with accessories will be measured as one RM.

M & L for Sub main wiring with 2 runs of single core 2.5 Sq.mm Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC casing and caping with all accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 2.5 Sq.mm & one run of PVC casing and caping accessories will be measured as one unit.

M & L for Sub main wiring with 2 runs of single core 4 Sq.mm PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked and including suitable size of PVC concealed conduit with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 4 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 4 Sq.mm & one run of PVC conduit with accessories will be measured as one RM.

M & L for Sub main wiring with 2 runs of single core 6 Sq.mm, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked, drawn through and including PVC casing and caping with all accessories fixed on Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 3 runs of 6 Sq.mm & one run of PVC casing and caping accessories will be measured as one unit.

M & L for Sub main wiring with 4 runs of single core 6 Sq.mm, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, 1100 Volts, FRLS Grade, ISI Marked and including suitable size of PVC concealed conduit with all accessories concealed in Walls / Roofs / Floors / Ceiling etc. and connecting terminal ends including One run of 6 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor cable, green in colour, 1100 Volts, FRLS Grade as earth continuity conductor complete all as specified and as directed. Note: 5 runs of 6 Sq.mm & one run of PVC conduit accessories will be measured as RM.

M&L Point wiring complete with 1.5 sqmm single core PVC insulated and unsheathed cable 1100 volts, FRLS grade with multistranded copper conductor ISI marked drawn through heavy duty PVC casing caping / conduit fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm stranded copper conductor cable as earth continuity conductor and connected to common earth dolly, including concealed MS box with 3 mm thick laminated sheet cover fixed with brass screws and cup washers for mounting of plate mounting for housing the switches, socket outlets, fan regulators etc, for One Light / Fan Point / Bell Point controlled by One Switch complete all as specified and as directed.

All as per item No. 205 here-in-above but for one light point controlled by 2 way switch

All as per Item No. 205 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on independent board, complete all as specified and directed.

All as per Item No. 205 here-in-before, but for one 3 pin, 6 Amps switch socket outlet point on same board complete all as specified and directed.

All as per Item No. 205 here- in- above, but for 3/5 pin 16amps socket outlet independently, with 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 and including 1100 Volts, FRLS Grade, 2.5 Sq.mm, Single Core, PVC Insulated, Unsheathed, Multistranded Copper Conductor Cable, conforming to IS - 694 as earth continuity conductor and connecting to earth dolly complete all as specified and as directed.

S & Fix switch piano, flush type single pole,one way 5 Amps capacity

S & Fix switch piano, flush type single pole,Two way 5 Amps capacity

S & Fix switch piano, flush type single pole,one way 15 Amps capacity

S & Fix socket out let 6A 2/3 on combined 2 module

S & Fix socket out let 6A/16A-2/3 pin combined 2 module

S & Fix fan regulator electronic 2 modular type volts AC 50 HZ ,100 Watts,4 step complete all as directed.

S & Fix Bell push flush type SP 6 Amps.

Earthing complete with galavanised steel plate electrode 600x600x6 mm thick buried directly in ground vertically ( earth pit to a depth of not less than 2.25 meter deep below ground level) with the top edge of earth place at a depth of not less than 1.5 meter below normal ground level connected to galvanised earth lead 4 mm dia by means of bolts, nuts, washers of galvanised iron and provision of earth wire, galvanised iron protection pipe 15 mm bore,medium grade up to and including test point including necessary earth work in any type of solid and PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) earth chamber, watering pipe 20 mm dia galvanised iron light grade with funnel, RCC (1:2:4) type B1 precast cover 40 mm thick with 6 mm dia mild steel bars complete all as shown in electrical plate N. 3 of SSR Part - I connected to earthing test point all as specified or indicated, including testing on completion. Note :- (i) Quoted rate deemed to include the cost of excavation and earth work, PCC pit, funnel and cover etc. (ii0 Cost of earth lead & protection pipe upto length of 7.5m shall deemed to be included in the rate quoted

S G Enterprises

agarwal and company

KSP ENTERPRISES