APART/NOCP/ROADS/DH-01 Const. Of Road from Sonaluguri (Kurshakati) to Ghunghunikhata via Banderkuti in Dhuburi District

Amount

Setting out Unit = 1 KM Reference Bench Mark and Bench Mark pillar as per MORD and Technical Specification Clause No. - 100 v) Typical benchmark as per drawing 200

Clearing and Grubbing road land (Clearing and grubbing road including uprooting rank vegetation grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness

Construction of Embankment with approved materials obtained from borrow pits a lift upto 1.5m , transporting to site, spreading, grading to required slope and compecting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as Technical Specification Clause 301.5 (A) Private Land

Construction of subgrade and earthen shoulders with material from borrow pits with all lifts and leads, transporting to site, spreading, gradaing to required slope and compacting (including land compension of earth) as per drawing Technical Specifications Clause 303.1 (A) Private Land For Subgrade Soil For Earthen Shoulder

Furnishing and laying of the lives sods of perennial turf forming grass on embankment slope, verges or other locations shown on the draweing or as directed by the Engineer including preparation of ground fetching of sods and watering as per Technical Specification clause 309.

Construction of granular subbase by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, compete as per Tecnical Specification Clause 401 (i) For grading I materials For Drainage layer For GSB Total quantity

Providing ,laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the intersticks of coarse aggreate , watering and compacting to the required dencity grading 2 as per Technical Specification Clause 405 . (A) By manual means

Providing ,laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the intersticks of coarse aggreate , watering and compacting to the required dencity grading 3 as per Technical Specification Clause 405 . (A) By manual means

i) (a) Providing and laying interlocking concrete block pavements (M 40) having thickness 80mm as per technical specification clause 1504 (including of edge block / edge resitraint and carriage)

Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 i) ordinary kilometer stone (Precast)

Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC:8 fixing in position including painting and printing etc. as per drawing and technical specification clause 1703 i) 200 m stone (Precast)

Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 801 (ii) 60cm equilateral tringle

Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 801 (iii) 600mm circular

Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 801 (iv) 800mm X 600mm rectangular

Providing and erecting direction and place identification retro - reflectorised sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 2mm thick with area not exceeding 0.9 Sqm supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 1701

Providing and laying standred single cell precast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary eartwork in excavation back filling transporation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler , erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and Technical Specification Clause 1600, 1700, MORD Specification (Measurement shall be made in number) (i) Assam Standard Culvert (ASC) 1M X 1M (rate as per analysis)

Providing and laying standred single cell precast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary eartwork in excavation back filling transporation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler , erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and Technical Specification Clause 1600, 1700, MORD Specification (Measurement shall be made in number) (i) Assam Standard Culvert (ASC) 2M X 2M (rate as per analysis)