CERTAIN B/R REPAIR WORK PLASTERING, JOINERY, FLOORING, TILING, SANITARY WORK ETC IN ZANE B OF SOUTH AREA AT NASIRABAD.

Amount

Taking down plaster on wall /ceiling of any description including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in 1:6 on stone masonary wall surfaces or surface other than fair faces of brick work finished even and smooth without using extra cement complete all as specified & directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on ceiling surfaces finished even and smooth without using extra cement complete all as specified & directed.

M & L for 15mm thick rendering in CM (1:4) on brick/concrete surface mixed with water proofing compound as per manufacturers instruction & surface fair and even complete all as specified & directed. NOTE :- WPC will be measured and paid separately

M&L for rough cast plaster over & including10mm thick rendering in cement mortar (1:4) on stone/brick masonary wall surface complete all as specified & directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over & including a coat of 1mm thick wall putty (JK/BIRLA) complete all as specified & directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed.

M & L for preparation of newly plaster surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparing the new or previously untreated wood based and wooden surface of any description over 10 cm width or girth & applying two coats of synthetic enamel paint (1st grade) over one coat of pink primer complete all as specified & directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth applying two coats of synthetic enamel paint (1st grade) over a coat of red oxide primer complete all as specified.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles 7-8 mm thick, area of tile exc 0.11 sqm but n.exc 0.18 sqm, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles on vertical surfaces of wall such as dados, skirting etc over & including 10 mm thick screed plaster in CM 1:4 on stone masonry wall surfaces complete all as specified and directed by Engineer-in-charge.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

All as per Sl item no 13.00 here in before but on vertical surfaces of stone wall such as dados, skirting etc set & jointed in neat slurry and pointed in white cement mixed with pigments to match the shade of tile over & including 10 mm thick screed plaster in CM 1:4 complete all as specified and directed.

M & L for non-skid ceramic coloured tiles, 7 to 8 mm thick ( square/rectangular), area of each tile exc 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tile laid over and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed.

M & L for machine pressed precast concrete interlocking tiles, reflective type, in path 60 mm thick, ISI marked, M-35 grade of approved quality laid over & including 25 mm sand cusion vibrated with mechinical vibrator complete all as specified and directed.

Demolition of stone/brick masonry built in cement or cement lime mortar complete all as specified and directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L for brick work with fly ash bricks, straight or curved on plan to any radius, in half brick thick wall built in CM 1:4 complete all as specified and directed

Demolition of cement concrete (unreinforeced) in floors and paving n.exc 15cm thickness (above or below ground level) complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in floor complete all as specified and directed.

M&L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding the exposed edges laid over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M & L for rolled mild steel work angle iron (40x40x6mm) as in door frame (Chowkhats) including provn of 10mm dia deformed bar welded horizontally to bottom of frame confirming to Fe-290 (Gde E-165) including preparing back of chowkhat and applying two coats tar and sanding newly tarred surfaces with clean sharp sand complete all as specified and directed

Dismantling loose / disintegrated portion of RCC chajjas bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC (1:1.5:3), 15mm to 50mm thick using 6 to12mm graded stone aggregate to make up and finished to required shape including applying anti corrosive paint on exposed surface of reinforcement, provision of necessary supports, form work and 10mm thick plastering in CM (1:4) finished fair and even complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick sheet glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing, pins, spring clips & providing & fixing new ones and S&F 3.00 mm thick figured glass, ordinary quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.50 sqm each and removing from site complete all as spd & directed and making good disturbed surface of walls in cement mortar (1:3) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm and n.exc 4.00 Sqm each and removing from site complete and making good disturbed surfaces of wall in CM (1:3) all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf complete all as specified and directed.

Taking down shutters of any description n. exc 1 sqm each leaf and removing from site all as specified and directed

S & F plain, solid, straight chowkhats or frame of 2nd class hard wood Hollock/Bansum/Sal rebated on solid put together with pinned at joints complete all as specified and directed

S & F hold fast of flat iron 25x6mm conforming to Fe- 290 (Gde E-165) including preparing the surfaces & treated with coaltar & sanded with clean sharp sand complete all as specified & directed

S&F continuous (piano) hinges mild steel bright finish or electrogalvanised of 30mm width of flaps (when open) complete all as spepcified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each leaf & refixing in the same opening after resecuring or easing & adjusting etc complete all as specified and directed.

S & F second class HW Hollock/Bansum/Sal 35mm thick, factory made, plain framed, paneled shutter (Three panels) with panels of 9mm thick BWP grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive conforming to IS-710. The size of rails & style shall be as per IS-1003 (part-I) kiln seasoned & chemically pressure treated complete all as per specified and directed.

S & F second class HW Hollock/Bansum/Sal, 35 mm thick, glazed and skeleton shutters, factory made open rebated (Three panels)and prepare to receive glass, gauge etc with out sash bar, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. Size of members of shutter shall be as specified in SSR Part-I, section 8 clause Member shall be kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F for solid PVC moulded door frame of size 50mm x 47mm made out of 5mm prelam colour sheet PVC Sheet reinforced with M.S square tube, fixing in opening as per specification & drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2 raised panel design with 2mm thick moulded prelam coloured PVC sheet on front face & 2mm thick prelam coloured PVC sheet on back face and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed. Note :- Cadmium screws to be used for fixing and fixtures

S & F in repair steel window/ventilator factory made, made out of MS hollow section 79mmx39mmx1.6mm thick frame with double shutters (Glazed & wire gauge shutters) made out of 'Z' section using flush butt welding & tenon riveting all as per IS 1038 / 83, dobby hinges shall be provided to both shutters. Locking arrangements as per sample approved by GE, provided with knob, 10mm MS square bars in grills, 'Z' section handle 100mm sized & 150mm long hook & eye welded to frame & shutter, four nos lugs welded to frame including necessary flat iron beading for securing wire gauge etc including holes, cutting holes for hold fasts and making good in PCC 1:2:4 type B-1 including preparation of surfaces & applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and directed. Note : Wire mesh and sheet glass shall be measured & paid separately under respective items.

Taking down of old boards and M&L 18/19mm thick block board grade-II quality exterior grade with decorative type with decorative face veneer on one face fixed complete including teak wood lipping 19x6mm thick fixed with nails in shelves, partion and palmet boxes, shelves, almirah book cases, toilet boxes, racks, cup board and similar work complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt of size 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F mild steel butt hinges, medium weight, cold rolled, ISI marked of size 125 mm complete all as specified and directed.

S&F in repairs mild steel butt hinges, medium weight, cold rolled, ISI marked of size 125 mm inclluding necessary welding complete all as specified and directed.

S&F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150 mm long complete all as specified and directed.

S & F aluminium handle fabricated type, anodised 150mm size conforming to IS complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staple complete all as specified and directed

Taking out old unserviceable steel wire cloth & S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed on wooden/steel frames with tinned tacks or stainless steel wire staple complete all as specified and directed

S & F in repairs floor door stopper aluminium alloy body & tongue of size 140mm, anodised with hard drawn spring, fixed in door,over all length of cover plate of complete all as specified and directed.

S&F 300 mm rat tail rod Mild Steel ordianary pattern springs including roller and roller plate complete all as specified and directed.

S & F 100mm size hasp and staple, aluminium anodised, safety type, including bolt to hinge plate complete all as specified and directed

S & F in reapirs 25mm dia MS chromium plated curtain rod powder coated tubular, fancy type including fixing U shape bracket complete all as specified and directed.

S & F in repair white colour rotational moulded polyethylene (HDPE) water storage tanks of 500 Ltrs capacity (cylindrical vertical with closed top) hoisted, double layer, ISI marked hoisted and fixed in position complete all as specified and directed.

Taking out old unserviceable water closet (squatt pattern) and S & F Vitreous China, Squatting pan Orissa pattern size 580X440mm, white with integral foot rests (excluding flushing cistern and flush pipe ) with chinaware ‘P’ or ‘S’ trap, front or back inlet including connection to trap and to flushing pipe, anti syphonage pipe and making good the floor to match the existing complete all as specified and directed.

Taking down old unserviceable WHB and S&F wash hand basin vitreous china colour flat size 550 x 400mm complete all as specified and directed

Demolition of cement concrete of any description from sunken floor (ground or first floor) and removing and depositing materials exc150mtrs but not exc 250mtrs away complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in sunken floor, filling and mass concrete complete all as specified and directed.

M & L for five layered roof treatment with APP modified polymeric water proofing membrane, 2mm thick having centre core not less than 100 micron high molecular high density polythylene film (HMHDPE) protected on both sides with high polymeric asphaltic mix and 20 micron HMHDPE film weight not less than 3 Kg/ Sqm applied with bonding material using blown type bitumen Grade 85/25 @ 1.20 Kg/ Sqm over bitumen primer conforming to IS- 3384 @ 0.40 Kg/ Sqm with final coat of bonding bitumen grade 85/25 @ 1.20 Kg/ Sqm over APP membrane with all overlaps complete all as specified and directed.

M&L for 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection finished fair and even laid in alternate bays n.exc 2m in length all as specified and directed.

S&F in repair PVC valve less syphonic action type low level flushing cistern, 10 Ltrs capacity, white, with inlet ball valve, float and handle fixed on walls by driling holes and using PVC rawl plug of suitable size complete all as specified and directed.

S & F in repair PVC flush pipe of approved quality 32 mm bore, for low level flushing cistern complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 100 mm size with swivel joints, including fixing to steel pipe or union of 15mm bore complete all as specified and directed.

Taking down old unserviceable PVC connection and S & F PVC connection, heavy duty 15 mm bore, 45 cm long with two Nos PTMT nuts at both ends of approved quality complete all as specified and directed

S&F in repair pillar tap,15mm bore, cast copper alloy, chromium plated, fancy type, screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed

S&F in repair angle valve 15mm bore cast copper alloy, chromium plated, fancy type ISI marked screwed down high pressure with crutch or butterfly handle for iron pipe complete all as specified & directed.

S&F in repair gun metal high pressure globe or gate valve with iron wheel head screwed both ends for iron pipes of 25mm bore and fixed complete all as specified & directed.

Taking down old unserviceable waste pipe and S&F 32mm bore, 75cm long with one end socketed with one PVC reducer complete all as specified and directed.

S & F in repair 15 mm bib taps standard of PTMT any colour high pressure screwed for iron pipe minimum weight 90 grams complete all as specified and directed.

Taking down old unserviceable any type sink and S&F kitchen sink with drainage board overall size not less than 915x460, bowl size 410x 330x 160mm made of stainless steel 1.00 mm thick with plugs, washers and waste including fixing cantilever brackets and connecting union complete all as specified and directed.

Taking down old plate rack and S & F stainless steel plate rack made of 0.50mm thick of over all size 920mm x 785mm x 255mm and weight not less than 7.00 Kg each of approved quality complete all as specified and directed.

S & F in repair waste coupling CP 32mm dia for glazed ware basins etc with long screwed shanks and fly nuts flanged etc complete all as specified and directed.

S&F in repair bib taps 15mm bore, fancy type, long nose, cast copper alloy, chromium plated with crtuch or butter fly handle, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs PVC floor trap 75 mm outlet with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair tubular towel rail brass chromium plated 20mm dia 'D' type 60cm long between flanges complete all as specified & directed.

Taking up or down steel tubing and connection 15mm bore keeping aside for reuse or removing to store complete all as specified and directed.

All as per item No. 76.00 here-in-before but 20mm dia

All as per item No. 76.00 here-in-before but 25mm dia

Supply and fix mild steel water tubing 15 mm dia galvanised medium grade including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid on floors including testing complete all as specified and as directed.

All as per item No. 79.00 here-in-before but 20mm dia

All as per item No. 79.00 here-in-before but 25mm dia

M & L for refixing only 15mm bore old GI tubing to walls, ceiling or laid on floor including necessary cleanig, cutting, screwing and new fittings such as elbow, Tee, union, socket, reducer etc complete all as specified and directed.

All as per item No. 82.00 here-in-before but 20mm dia

All as per item No. 82.00 here-in-before but 25mm dia

Supply only liquid water proofing compound, ISI marked complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

All as per item No. 86.00 here-in-before but 110mm bore PVC (SWR) pipe

S&F in repair PVC (SWR) bends any radius 75mm bore with oval access door complete all as specified and directed. complete all as specifed and directed.

S&F in repair PVC (SWR) bends any radius 110mm bore with oval access door complete all as specified and directed. complete all as specifed and directed.

S&F PVC (SWR) 75 mm single juction (Single T) (equal or unequal) provided with oval access door complete all as spd and directed.

All as per item No. 90.00 here-in-before but 110mm Single T

M&L for aluminium grill medium grade of mesh size 50mmx50mm weight not less than 1.2kg/sqm fixed in wooden gauged shutter complete all as specified and directed.

M & L for coved filled in PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate at junction of roof and parapet wall / mumty / other vertical space and applying a coat of bituminous primer conforming to IS-3384 @0.30 litre/Sqm complete all as specified and directed.

M&L for machine cut Kota stone slab flooring of size 550mm x 550mm 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing laid over & including 15mm thick screed bed in CM 1:6 complete all as specified & directed.

M&L for Kota stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing in riser of steps, skirting, dado and pillar laid over & including cement screed 10mm thick in CM (1:4) complete all as specified & directed.

Raking out joints/ pointing to random rubble or polygonal rubble stone masonry uncoursed or brought upto courses built in CM and M & L for raised pointing in cement mortar (1:4) complete all as specified and directed.

M&L cutting holes in brick / stone walls for inserting hold fasts and making good dismantled portion in PCC 1:2:4 (20mm aggregate) and cement mortar 1:3 complete all as specified and directed.

S & F Vitreous China, wash down water closet pan (pedestal pattern), white, including plastic white seat cover closed pattern with flat bootm and mild steel chromium plated hinge device including connections to drain (or outgoing pipe) and to flushing pipe anti symphonage pipe etc complete all as specified and directed.

S & F in repair grating square/round of size 125mm of PTMT with centre hole or side hole (minimum weight 100gms) complete all as specified and directed.

Taking down old unserviceable water closet seat cover & S&F plastic water closet seat cover, white, closed pattern with flat bottom and cover & mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Dismantling of AC drain pipe/ PVC pipe jointed in cement mortar of size 75/110mm bore complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches complete all as specified and directed.

All as per item No. 102.00 here-in-before but 110mm bore PVC (SWR) pipe

S&F powder quoted Aluminum anodized door frame of section 63.50 x 38.50 x 1.80 mm thick with necessary beading rubber gasket, aluminum handle and stopper etc. including locking arrangements. All aluminum section shall be “JINDAL” or equivalent as approved by AO complete all as specified and directed. & shutter of the following member :- ( i) Style, top and lock rail of size 44.45mm x 47.62 mm x 1.80mm (ii) Bottom rail of size 114.30mm x 44.45mm x 1.80mm iii) Pivot ISI marked

S&F Aluminum sliding window two track frame of section 61.85 mm x 31.75mm x 1.20 mm thick section No. 78687, 28758, shutter of section 18mm x 40mm x 1.25mm (section No. 8663 / 8664 / 8665) with rubber gasket beading glass and locking arrangements etc. complete all as directed.

S & F in repair PVC coloured mirror cabinet of minimum size 422x622mm with mirror of good quality with shelves in bath fixed complete all as specified and directed. Make:- Prayag Cat part No. 555 or equivalent as approved by GE.

M & L for applying two coats of weather proof acrylic emulsion paint over a coat of emulsion wall primer all as per manufactures instructions complete all as specified and directed. Make :- Asian, Apex and Berger or equivalent as approved by GE

M & L for precast cement concrete (1:2:4) type B-0 using 12.5 mm graded stone aggregate, Jalli, 35 mm thick including all mouldings set in CM (1:4) complete all as specified and directed.

M & L for preparation of old plastered or unplastered surfaces of wall including cornices etc applying two coat of white wash complete all as specified and directed.

All as per srl item No 109.00 here in before but ceiling

M&L for washing, rubbing down, preparing and stopping of old distempered surfaces, removing nails, making good holes, cracks etc and applying two coat of oil bound distemper on wall white or tinted, complete all as specified and directed.

M&L for 3.00 mm thick sheet glass ordinary figured quality & glazing with oil putty not exc 0.50 Sqm each pane complete all as spd & directed.

M&L for applying bitumen blown any grade applied two coats to concrete surface @ 1.50 Kg/ Sqm per coat with supply & fixing of polythene film black 50 micron laid in sunken portion complete all as specified and directed.

M&L for 50mm bore GI tubing, medium grade, galvanished including making necessary holes in walls and making good complete all as specified and directed.

S & F in repairs mild steel frame such as grill grating cooler stand etc with end of bars sholdered or reveted or forged into pikes frame for water tank and similar work conforming to Fe-290 Gde 165 including necessary fixing complete all as specified and directed.

Demolition of water tank of any description and capacity which not included in item No. 53 here-in-before complete all as specified and directed.

M/S SHIVA TRADERS

Shree Sai Ram Enterprises

V K LAKWAL CONSTRUCTION

GOMA CONTRUCTION COMPANY

Sunil Enterprises

M/s SUNIL ENTERPRISES

kirtiman traders

M/S Bansal Construction