REPAIRS TO FLOORING, FALSE CEILING, SANITARY FITTINGS, ROOF, WALLS, CERTAIN JOINERY WORKS OF CERTAIN BLDGS AND REPAIR TO HARD STANDING, PATHS AT ICGS DIGLIPUR

Amount

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exceeding 1.50 Sqm and not exceeding 4.00 Sqm each.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames not exceeding 1.50 Sqm each.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the framing/tack coat with bituminous primer at 10 kg per 10 sq metre.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing.

M&L 2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.

S&F 2nd class hardwood 35mm thick Glazed and skeleton shutters, divided in to squares with plain, chamfered or rounded open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats.

S&F 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

S&F 2nd class hardwood 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.

S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F 150mm long aluminum handles, cast type anodised.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

S&F Floor door stopper 150mm overall length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F in repairs 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed.

S&F in repairs 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F in repairs 150mm long aluminuim handles, cast type anodised.

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

Repairs to aluminium window shutters, replacing worn out friction hinges and tightening of corners complete all as directed.

Repairs to aluminium door shutter bottom touching on floor , removing the shutter and repalcing the hinges/ tightening all screws complete for free movement of shutter complete all as directed.

S&F in repairs Floor door stopper 150mm over all length of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F 100mm long Butt hinges, medium weight, cold rolled stainless steel, and fixed.

M&L 20 mm thick granite (of best quality) work (table rubbed and polish to mirror finish) in a steps, jambs, pillars, window sills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F new 1000 litres capacity rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) white colour both inside and outside with top cover, hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed, including dismantling old water tank of capacity exceeding 500 ltrs but not exceeding 1000 ltrs and removing to store complete all as specified.

S&F new 500 litres capacity rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer (ISI Marked) white colour both inside and outside with top cover, hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed, including dismantling old water tank of capacity exceeding 250 ltrs but not exceeding 500 ltrs and removing to store complete all as specified.

S&F in repairs Bib taps, cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore and fixed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe 15mm dia and fixed.

S&F Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore dia or for unions and fixed.

S&F (in repairs) Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25mm bore dia iron pipe and fixed complete all as specified.

S&F in repairs ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule 25 mm bore and fixed.

S&F in repairs Vitreous China wash hand basin, white, flat back, size 550x400mm excluding taps, waste pipe, chain and plug and porcelain stopper but including mild steel/ CI brackets and cutting for and pinning in ends of brackets or erecting stand complete all as specified.

S&F (in repairs) 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle and flushing pipe including brackets specified complete all as specified.

S&F (in repairs) plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hanging device complete all as specified.

S&F (in repairs) Vitreous China wash down water closet pan EWC (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified.

M&L for 15 mm bore new steel water tubing 'medium grade' galvanised (ISI marked) with all new fittings (ISI marked) fixed to walls and ceilings or laid in floors complete all as directed.

M&L for 20 mm bore new steel water tubing 'medium grade' galvanised (ISI marked) with all new fittings (ISI marked) fixed to walls and ceilings or laid in floors complete all as directed.

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store.

S&F (in repairs) 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6kg/sqcm fixed to walls as in waste pipe complete all as specified.

&F (in repairs) 15mm bore cast copper alloy, chromium plated angle stop cock (one way) long thread with wall flange, screwed down, high pressure, with crutch handle, screwed externally ends for unions etc and fixed complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for rendering 10mm thick in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces, finishing the surface fair and even complete all as specified.

M&L for screed bed or bedding layer of 15mm thick for laying floor finishes, in cement and sand mortar 1:4 complete all as specified.

M&L for Vitrified Ceramic tiles (first quality) 10 mm thick, light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.

S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ rain water gutter/ cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S&F Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240

S&F Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410 -W (Gde- E- 250) quality- A.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

S&F Mild steel screw bolts length of bolt exceeding 5cm but not exceeding 10cm long and diameter of neck in 16 to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut.

M&L for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L for providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors.

M&L for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/ hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same to match the existing floor surface by white/ grey cement.

Demolition of brickwork or stone/ boulder masonry or PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

Demolition of cement concrete in ground floors and pavings exceeding 15 cm thickness (below or above ground level) and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

M&L for Pre-cast cement concrete Type C1, 1:3:6 (using 20mm graded crushed granite stone aggregate) block masonry with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:4 complete.

M&L for rendering 15mm thick in cement and sand mortar 1:4 on fair faces of brick work or concrete surfaces, finishing the surface fair and even complete all as specified.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of white wash complete.

M&L for PCC Type D2, 1:4:8 (using 40mm graded granite stone aggregate) as in foundations, filling and mass concrete.

M&L for 75 mm thick PCC Type D2, 1:4:8 (using 40 mm graded crushed granite stone aggregate) laid in sub-floors, sub-bases, floors and pavings, etc. finishing surfaces of concrete even and rough complete all as specified.

M&L for 100 mm thick PCC Type B1, 1:2:4 (using 20 mm graded crushed granite stone aggregate) laid in flooring and pavings, etc. finishing cement concrete surface even and fair without using extra cement complete all as specified.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick, with grey cement and pigment, set, jointed and pointed in neat cement slurry on floors/ steps, over and including screed bed or bedding layer of 15 mm thick in CM 1:6 complete.

M&L for 40 mm thick sand cushioning over sub base for receiving interlocking tiles including compaction.

M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigments, pointed in coloured cement to match the surfaces.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and facilitate to cut reinforcement and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

Excavating over areas, not exceeding 1.5 mtr deep and getting out in any type of soil (soft/ loose or hard/ dense).

Excavating in trenches, not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and getting out in soft/ loose type of soil.

Removing excavated material not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick Soft/ loose soil.

M&L precast RCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in CM 1:4, including necessary formwork complete. Note: Reinforcement shall be measured and paid separately.

M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for high yield strength deformed TMT steel bars 6 mm to 8 mm dia as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ for 100 mm thick cement concrete slab complete.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc., not exceeding 1.5 mtr high from base.

M&L for PCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in copings, kneelers, apex stones, bed plates, levelling course, kerbs water troughs and the like including use of formwork, weathering, slightly rounded or chamfered angles and throating.

bansal construction

SK CONSTRUCTION

NAVJEEVAN ENTERPRISES

V CHINNA DURAI