REPAIRS REPLACEMENT OF SEWAGE LINES MANHOLES SEPTIC TANKS ETC PCC PATH HARD STANDING DRAIN AND OTHER MISC WORKS AT MH KHADKI UNDER GE MH AND RH KHADKI

Amount

Cleaning of all blockage of any type of trap, water closet, soil waste/ vent pipe, gully traps upto first manhole by removing all chockage and removing the same outside MD land and making good the distrurbed surfaces as per existing where required all per directed by Engr-in-Charge

Cleaning of existing 150mm dia sewage line upto 1.00 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi solid /solid sludge etc coming in the next manhole is removed and then the line is cleaned with water complete for effectve functioning & removing the spoil outside MD land complete all as directed by Engr-in-Charge.

Cleaning of existing 200mm dia sewage line upto 1.50 m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi solid /solid sludge etc coming in the next manhole is removed and then the line is cleaned with water complete for effectve functioning & removing the spoil outside MD land complete all as directed by Engr-in-Charge.

Cleaning of existing 200mm dia but n.exc 300mm dia, SWG / RCC sewage line exc 1.5m but n.exc 3m depth from ground level using jute or PVC nylon rope with knot at one end and other end free passed through the line or by rodding & removing all liquid/semi solid /solid sludge etc coming in the next manhole is removed and then the line is cleaned with water complete for effectve functioning & removing the spoil outside MD land complete all as directed by Engr-in-Charge.

Cleaning of existing manholes of internal bottom area exc 0.20 Sqm but n exc 0.36 Sqm size upto depth of 1.0 m from top of manholes and removing all semi solid or solid material of any description outside MD land and cleaning the manholes from inside complete with water etc complete all as directed by Engr-in-Charge.

Cleaning of existing manholes of internal botttom area exc 0.36 Sqm but not exc. 1.44 Sqm upto depth exc 1 m but n.exc 2.5 m from top of manholes and removing all semi solid or solid material of any description outside MD land and cleaning the manholes from inside complete with water etc complete all as directed by Engr-in-Charge.

Cleaning & Mechanically pumping out sewage water from sump well where required and as directed with taking precautionary measures including tools and plants as required & removing the same outside MD land complete all as specified and directed

Excavating in trenches not exceeding 1.5m wide and 1.5m depth for foundation, etc., for Shaft wells, Manholes etc not exceeding 10sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil all as specified and directed.

Returning, filling, in including spreading, leveling, watering well ramming in layers not exceeding 25cm thick with soil obtained from excavation all as directed.

Demolition and breaking up drain pipes of 150 mm bore RCC/SGSW set in cement mortar including removing the debries outside MD land all as directed

Demolition and breaking up drain pipes of 200 mm bore RCC/SGSW set in cement mortar including removing the debries outside MD land all as directed.

Demolition and breaking up drain pipes of 300 mm bore RCC/SGSW set in cement mortar including removing the debries off the premisses all as directed.

M&L for 150mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified.

M&L for 200mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified.

M&L for 300mm dia RCC drain pipes class NP2 laid in trenches and jointed with in cement mortar all as specified.

M&L cutting to existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate, smooth finished and reforming benching as required for internal dia of pipe 200mm all as directed.

M&L cutting to existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benchings for and forming branch channel (1/2 round or 3/4 section) in cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate, smooth finished and reforming benching as required for internal dia of pipe 300mm all as directed.

Excavating in existing drainage (disilting of existing drainage) upto 1.5 meter depth complete all as specified and directed.

Demolition of brick, work PCC block masonry or stone boulder masonry built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound as per manufacturer's instructions on block walling / concrete surfaces finished even and smooth without uing extra cement all as directed. Note : Liquid water proofing compound shall be measured and paid separately.

Supply only liquid water proofing compound hydroseal-W+ or eqivalent (for plaster hardening, to control efflorescence & fungal growth) as approved by GE.

Demolition of concrete of any description below or above ground and in any position not otherwise specifically provided for complete all as directed.

M&L for Cement concrete type M-15 grade (nominal mix) using 40mm graded stone aggregate in surface channels and drains all as specified

M&L for PCC M-15 grade (nominal mix) using 12.5mm graded stone aggregate as in coping and benching of manholes etc., finished smooth including neceessary form work complete all as specified and directed.

M&L for PCC M-7.5 grade (nominal mix) using 40mm graded stone aggregate as in foundation, mass filling of any type all as specified and directed.

M&L for 100 mm thick PCC M-15 grade (nominal mix) using 20mm graded stone aggregate, as in path, floor, parking etc including construction joint after every 2 mtr interval and from wall will be filled by mastic all as specified and directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the same off the premises complete all as specified and directed.

M & L for Pre-Cast M-15 grade (nominal mix) using 20mm graded stone aggregate as in cover slabs set in cement mortar 1:6 including necessary formwork all as specified and directed. Note : Reinforcement shall be measured and paid separately under relevant item of this BOQ.

M&L TMT bars 6 to 8 mm dia bars cut to length, bent to shape required including cranking, bending, hooking ends, and binding with mild steel wire not less than 0.9 mm dia confirming to IS, all as specified and directed.

S&F TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250).

S&F in repairs 75 mm Cast iron floor trap / Nahani trap, with grating including jointing to waste pipe fixed in cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement all as specified and directed.

Demolition and breaking up drain pipes of 100 mm bore RCC/SGSW set in cement mortar including removing the debries off the premises all as directed

Demolition and breaking up drain pipes of 150mm bore RCC/SGSW set in cement mortar including removing the debries off the premises all as directed

S&F in repair 75 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints fixed on walls or in floors complete all as specified.

S&F in repair 110 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints fixed on walls or in floors complete all as specified.

S&F in repairs 75mm dia PVC (SWR) bends any radius all as specified

S&F in repairs 110mm dia PVC (SWR) bends any radius all as specified

S&F in repairs of 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified.

S&F in repairs of 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal all as specified.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc.

M&L rendering 15 mm thick (10mm + 5mm) plaster on fair face of brick work or concrete surface in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note : Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

Dismantling fencing, wire mesh any type complete all as specified and directed by Engr in Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed by Engr-in-Charge.

S&F Mild steel for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0.

M&L for cement concrete in foundation PCC M-10 grade (nominal mix) using 40mm graded stone agg for fencing post etc all as specified.

Supply only galvanized steel chain link fence fabric of mesh 50 x 50 mm, made out of 2.50 mm nominal dia of mesh wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0.

M&L for preparation of old steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Engr-in-Charge.

M&L for preparation of untreated new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality ) over a coat of red oxide primer complete all as specified and as directed.

M & L preparation of old floor surfaces of paver block surfaces, concrete floor, concrete tiles surfaces and applying two coat of PU coated floor paint over one coat of primer complete all as specified and directed.

M&L 75mm thick PCC M-7.5 grade (nominal mix) using 40 mm graded stone aggregate as in sub base all as specified.

M&L for minimum 25mm thick crushed stone dust filling under floors as cushioning for laying of interlocking tiles as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laided bedded and pointed in cement mortar in floors, aprons etc.

M&L for 80mm thick coloured machine pressed interlocking rubburised and glossy finish paver block any shape and size conforming to IS 15658-2006 of M-40 Grade laid all as specified and directed by Engineer-in Charge.

S&F Pre Polished Chequered cement concrete tiles glossy and rubburised finish colour 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors over and including 15mm thick screed bed in CM 1:4 under tiles all as specified and directed by Engineer-in Charge.

M&L for 75mm thick PCC M-10 grade (nominal mix) using 40mm graded stone aggregate as in plinth protection/path finishing cement concrete surface even and smooth without using extra cement complete.

M& for Forming Contraction (Dummy) joints 75 mm deep x 10mm wide, filled with sealing compound complete all as specified and directed by Engr-in-Charge.

M & L moorum/red bajri filling in floors or pavings laid in layers 15 cm thick spread levelled and rolled including watering

M & L providing precast cement concrete M-15 grade (nominal mix) using 20mm graded stone aggregate as in kerb stone of size 45cm x 10cm x 35cm and set in CM 1:4 as specified.

M&L for Hardcore of gauge n exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces.

V.R.PRAJAPATI AND CO.

MAHESH DADAJI BACHHAV

SAMBHAJI D JARANDE

ARK ENTERPRISES

bhardwaj enterprises