REPAIRS TO ROOF TREATMENT, RENOVATION OF TOILETS FLOORING AND CERTAIN MISC WORKS OF TYPE - IV AND V MARRIED ACCN UNDER AGE B/R (SOUTH) NO II OF GE (SOUTH) SECUNDERABAD

Amount

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each all as specified and as directed..

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm all as specified and as directed.

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete all as specified and as directed.

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and as directed.

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube ,supplying and fixing in opening as per manufacturers instructions and as directed by Engineer-in-Charge.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified.

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). complete all as specified and as directed

S&F in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc completle all as specified and as directed.

S&F 100mm long SS butt hinges, medium weight cold rolled complete all as specified and as directed..

S&F 100mm long MS butt hinges, medium weight cold rolled all as specified and as directed..

S&F 75mm long MS butt hinges, medium weight cold rolled all as specified and as directed..

S&F 200mm long aluminium barrel tower bolt barrel tower bolts of extruded section and fixed all as specified and as directed.

S&F 150mm long aluminium handles cast type anodised all as specified and as directed.

S&F 300mm long aluminium sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts four on bolt plate and two on stapple plate etc., complete. all as specified and as directed.

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete. all as specified and as directed.

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or weldedall as directed by Engineer-in-Charge

S & F, steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete without glazing bars, dovetailed or welded all as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane.all as specified and as directed.

S&F Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm and fixed with galvanised wire staples.all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth 0.50mm nominal dia of wire and average width of aperture 1.18mm fixed with galvanised wire staples complete all as specified and as directed.

M&L for 19 mm thick BWP 710 Grade Maraine plywood Gurjan quality for kitchen cabinets fixed as per manufacture instruction complete all as specified and as directed.

S&F 1 mm thick decorative laminate fixed with marine adhesive for kitchen cabinets fixed as per manufacture instruction complete all as specified and as directed.

S&F Stainless Steel 304 Grade Kitchen Utencial Baskets fixed with Telescopic siliding channel to cabinet as per manufacture instruction complete all as specified and as directed.

S&F Stainless Steel 304 Grade fancy type handles for cabinet as per sample kept in office complete all as specified and as directed.

S&F Stainless Steel 304 Grade self closing hinges for cabinet as per sample kept in office complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

M&L Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete.complete all as specified and as directed.

Removal of old roof treatment of any description and roughening the surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc including and removing the debris to a distance of n.exc 100 m away from plinth protection complete all as specified and as directed.

Demolition of cement concrete in roof incl existing roof teratement Removal of old roof treatment of any description and roughening the surfaces of old concrete roof by picking, sweeping clean and washing down with water to remove dust etc (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg. all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) ype B0 by using 12.50 mm graded stone aggregate as in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair even without using extra cement complete all as specified and as directed.

M & L 15mm thick rendering screwed in CM 1:4 using water proofing compound at the rate of 3% weight of cement over concrete surfaces complete all as specified and as directed. Note:- WPC will be measured and paid separately.

M & L cutting grooves in brick wall of size 75mm wide 65mm deep and shapping to horizontal face of the groove with cement mortar 1:3 complete all as specified and as directed.

M&L priming the plastered roof surfaces with bitumenous primer @ 0.30 Kg per sqm and applying APP based polymeric membrane minimum weighing 3.5 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) and on primed surface by forced application and apply hot bitumen VG - 30 @ 1.20 Kg/Sqm over apply bitumen base Aluminium paint @ 0.20 Kg/ Sqm complete all as specified and as directed.

Supply only water proofing compound

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed.

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs complete all as specified and as directed.

S&F in repair rotational moulded polyethylene water storage tanks 500 litre capacity incl (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I including dismantling and taking down existing water tank complete all as specified and as directed.

S&F in repairs 20 mm dia gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weigth 455gms) 20mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections of 15mm dia complete all as specified and as directed.

All as per item No. 10 above but of 20mm dia

S&F 15mm dia steel water tubing of medium grade galvanised with all fittings & fixing complete to walls & ceilings or laid in floors complete all as specified and as directed.

S&F 20mm steel water tubing medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and as directed.

M & L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Taking down rain water pipes of any description any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints incl MS brackets for fixed to walls complete all as specified and directed..

Demolation of Brick or stone masonry built in cement mortar.complete all as specified and as directed.

M/L brick work with Flyash bricks built in CM 1:6 straight or curved exceeding 6m mean radius complete all as specified and as directed.

Taking down plastering on brick walls/celing etc including racking out joints, hacking for key, scrabing down with water etc. all as specified and as directed.

M & L for 15 mm thick rendering in Cement Mortar 1:4 on fair faces of Brick works or Concrete surfaces with 3.0 % of WPC and finishing even and fair without using extra cement. in patch work at various place up to height 7.50 Mtrs incl necessary scaffolding complete all as specified and as directed.( NOTE : WPC shall be paid separately)

M&L for applying two coats of Dr Fixit Rain coat over a coat of prime seal primer incl preparation of newly plastered surface of wall complete all as specified and as directed..

M & L for 10 mm thick rendering in Cement Mortar 1:4 on soffit of slab/sun shade of Concrete surfaces and finishing even and fair without using extra cement. complete all as specified and as directed.

M&L for applying three coats of white wash incl preparation of newly plastered surface of celing complete all as specified and directed..

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6. complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square /rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4 complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified & directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors surface set and jointed in neat cement slurry and pointed with white or colour cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic tiles, coloured, of size 350 x 250 x 7mm thick , as in vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for cutting and polishing of existing terrazzo floor / Skirting complete all as specified and as directed.

S&F for 20 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed.

S&F in repairs 15mm bore Bib taps, castcopper alloy Fancy type , screwed down, screwed foriron pipe or for brass ferrule complete all as specified and as directed

S&F in repair 15mm bore pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe all as specified and as directed. .

S&F in repairs stop cock 15mm dia cast copper alloy fancy type with capstan head ,chromium plated screwed down complete all as specified and as directed. .

S&F in repairs angle cock 15mm dia cast copper alloy with capstan head ,chromium plated screwed down complete all as specified and as directed. .

S&F in repair two way bib cock or Angle cock 15 mm chromium plated with capstion head fancy type of branded complete all as specified and asdirected.

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified

S & F basin Mixture cromium plated single lever w/o popup waste incl all fitting & fixtures complete all as specified (Make : Hindware Cat no : F320011) all as specified and directed. .

S&F Brass Chromium plated shower roses with or without swivel joints,125mm including fixing to steel pipe or union complete all as specified and as directed.

S&F 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified and directed. .

S&F for 50 mm dia Unplasticised PVC pipes of pressure rating 10 kgf/cm2 laid in trenches complete all as specified and as directed.

S&F in repair WHB vitreous china (flat back or angle back type ) ,including cutting for pinning in ends size 550x400 mm including brackets ,waste pipe ,coupling ,PVC connection pipe and CP piller tap complete all as specified and as directed.

Demolition of cement concrete in any desscription and any position paving exc 15 cm thickness below and above ground level complete all as specified and as directed.

Taking down the plaster incl existing treatment in sunken portion , washing down with water and applying 15mm tick plaster in CM 1:4 with 3% WPC all around incl floors and applying Shaliu Urethane BTD two coats @ 1.5 Kg/Sqm each Coat (Apply 2nd Coat after 6 Hrs) over a coat of Shali Pime WP @ 200gm/sqm and Provide 40mm GI Spout Pipe complete all as specified and as directed.(Note : Water proofing compound will be measured and paid separately .)

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in filling of sunken portion etc complete all as specified and as directed. .

S&F in repairs wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern complete all as specified and directed. .

S & F wash down water closet (pedestal pattern) of size 69 x 36 x 64 cm white Model R10* complete incl all fitting & fixtures complete all as per cat No Cat no : 92520 S-30 complete all as specified and directed. (Make : Hindware /parryware/Hindustan

S & F in repair Vitreous china Squatting pan Orissa pattern of size 580mx440mm wite with integral foot rests (excluding flushing cistern and flush pipe) complete including concrete bedding complete.all as specified and directed. .

S & F in repair PVC valveless syphonic action type low level flushing cistern 10 Ltr capacity with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density PVC. 32 mm dia complete all as specified and as directed.

S&F in repairs PVC connections 15mm dia with PTMT nuts length 600 mm complete all as specified and as directed.

S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F stainless steel Kitchen plate rack of 28 gauge of size 34"x35"x9" complete all as specified and as directed.

S&F Tubular towel rail brass chromium plated, 20mm dia, D type 60cm, D type 60cm between the flangers complete all as specified and as directed.

S&F in repairs PVC cabinet with door fitted with looking mirror size 422mm x 622 mm (Make: Prayag cat no : 555) all as directed by Engr-in-charge.

S&F for rolled section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails conforming to FE - 410-W Gde - E 250 Quality- A complete all as specified and as directed.

S & F prepainted galvalume aluminium zinc coating GI based corrugated steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/ cladding to wall fixed with self tapping screws as specified.

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc all as directed by Engineer-in- charge.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of white wash on Ceiling Surfaces complete all as specified and directed.

M&L complete removal of existing treatement and Preparing surfaces of wall and applying two coast of oil bound distember over a coat of primer incl necessary wall care puttty complete all as specified and as directed.

M&L Preparing of plastered or unplastered old decorated surfaces and applying one coat of oil bound distember on walls complete all as specified and as directed.

M & L preparation of old painted wooden surfaces and apply one coats of synthetic enamel paint on wooden surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed.

M & L preparation of old painted steel surfaces and apply one coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise described, over 10cm width or girth complete all as specified and as directed.

M & L Preparation of plastered or unplastered old decorated surfaces of wall and applying two coat of cement base paint all as specified and as directed.

Himagiri Constructions

M/S DIVIJA BUILDERS

ATUL ENTERPRISES

S.R.M.K Enterprises

BEEGEE DESIGN SYSTEMS

SREE KIRAN ENGINEERS

K LAKSHMAN SINGH AND CO

R G NAIDU CIVIL CONTRACTOR AND BUILDERS

NARAYANA CONSTRUCTIONS