LIMITED E-TENDER FOR CONSTRUCTION OF TOILET BLOCKS AT TLD PARKING AND PCVO PARKING & UPGRADATION OF TOILET BLOCKS AT TLD U/L AND LPG PUMPHOUSE AREA AT

PRICE BID FORMAT

BHARAT PETROLEUM CORPORATION LIMITED, SOLAPUR LPG PLANT

LIMITED E-TENDER FOR CONSTRUCTION OF TOILET BLOCKS AT TLD PARKING AND PCVO PARKING & UPGRADATION OF TOILET BLOCKS AT TLD U/L AND LPG PUMPHOUSE AREA AT SOLAPUR LPG

SHORT DESCRIPTION LONG DESCRIPTION QUANTITY UNIT AMOUNT

Construction of Toilet Blocks at TLD Parking Area and Revamping of Old Toilets

Earth work in excavation upto required depth below existing ground level upto required depth including removal of vegetation,shrubs and debris,

cutting and dressing the sides in slopes and bottom, levelling, grading and ramming of bottoms,bailing out of water, supplying of Temporary

supports to existing services line like water pipes,sewage pipes,electric overhead and u/g cables etc all if encountered, shoring, strutting and

1 EXCAVATION <1.5 M disposal of excavated earth outside BPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including necessary 50 M3

permissions from local authorities (if required) and charges( if any), complete. Payment shall be made as per the actual measurement but not more

than excavation plan.No payment would be made for extra excavation for making slopes etc. (Payment against this item shall be released only for

the earth being disposed outside BPCL premises)

Providing and laying PLAIN CEMENT CONCRETE for all depths below and upto plinth level in foundations,drains,fillings, non-suspended floors,

pavements & ramps or any other works etc.including the cost ofposition cement concrete of specified grade including the cost ofcentring and

2 shuttering, tamping, ramming, vibrating,curing, in anyshape,position,thickness and finishing the top surface rough or smooth,etc. all complete as per 9 M3

directions of Engineer-in-charge. - All work upto plinth level

1:3:6 (1 Cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)

RCC DESIGN MIX CONCRETE , MIXED AT SITE, Strength as specified, at all levels - Contractor should set up a batch mixing plant at siteSupplying and

laying in postion RCC design mix cement concrete specified grade with20mm and down size graded crushed stone aggregate in sub structure ofall

types including placing of concrete,supplying pockets,openings,recesses, chamfering wherever required etc., vibrating, tamping, curingand

3 RCC DESIGN MIX M25 9 M3

rendering if reqd. to give a smooth and even surface etc. allcomplete (excluding the cost of reinforcement, but including the cost ofcentring and

shuttering)for all height above plinth level in any shape,position, thickness etc. all complete as specified and directed. Onlysteel shuttering will be

used so as to obtain required finish. Theheight of shuttering shall not exceed 1.5 m per lift of concrete.

Supplying and placing HYSD steel reinforcement of Grade 500 (TMT) conforming to IS 1786 in position for RCC worksincluding straightening, cutting,

STEEL bending, placing in position andbinding with 16 SWG black soft annealed binding wire at everyintersection, supplying and placing appropriate cover

REINFORCEMENT block all completeincluding cleaning and making it free from oil, grease etc. complete-for all heights and depths and conforming to relevant IS code

(Make: SAIL,TATA, JSW, ESSAR, VIZAG STEEL or approved equivalent make conforming to IS code)

BRICK MASONRY BELOW PLINTH: Providing and laying Brick work withbricks having compressive strength not less than specified and conforming to

BIS std. of specified class and above, satisfying efflorescene,water absorbtionand dimension test as per IS code) infoundation and plinth in Cement

5 BRICKWORK CL CS 40 mortar 1:5(1 cement: 5 Coarse sand) asper specifications in one or more brick thickness including soaking of bricks, providingopenings, recesses 45 M3

,scaffolding,staging, curing, finishing the jointsflush below ground level and raking out joints etc. all complete, as perdirections of Engineer-in-charge.

BRK MSN PL CS CL40

CEMENT PLASTER Providing cement plaster finished including cleaning,hacking of base surfaces, scaffolding,curing,finishing etc. all complete for all

PLASTER 12MM CS heights as per specifications and directions of Engineer-in-charge including grooves, bands, drip moulder where ever required as specified. also

1:5 including providing 20 gauge chicken wire mesh stretched tight at all RCC/ PCC and masonry meeting points in 300mm wide strips (150mm on on

each surface) fixed with G.I. "U" type nails before plastering.(Payment will be made separately for chicken wire mesh).

Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The

BLD PNT CMT PRIM

7 finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of 280 M2

Enginner-in-Charge.

2 coat of Cement Primer

Preparing surface and painting of approved make, shade and quality in all heights of walls,ceiling, sun sheds fins etc. incl. providing

scaffolding,pitting in plaster to be made good, cleaning with coir brush & sand paper, curing and supply of all materials and labour complete. The

BLD PNT ACRYLIC

8 finished surface shall be even and uniform.The application of paint shall conform to Manufacturer's recommendation and as per the directions of 280 M2

Enginner-in-Charge.

2 coats ACRYLIC EMULSION

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing

cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including

9 WC INDIAN 2 EA

cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes

URINAL CHINA respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including

430x260 painting of fittings and brackets, cutting and making good the walls and floors wherever required:

One urinal basin with 5 litre white P.V.C. flushing cistern

Supplying, fitting and fixing white glazed vitreous china wash basin ofsuperior quality with ISI mark and size 550mm x 430mm, having single ordouble

holes with 15 mm CP brass pillar tap, CP brass chain and plugs, 32mm CP brass waste coupling, 32mm CP Brass Bottle trap and unions, 32mm dia

11 PVC flexible waste pipe,15mm PVC inlet water pipe connection, CI cantilever bracketsembedded in 1:2:4 concrete, 15 mm CP brass angle stopcock, 4 EA

etc. fillingthe gaps between basin and wall with white cement etc., pedestal, allcomplete at all leads and lifts as per drawings, specifications

andinstructions of the Engineer Incharge.

Supplying and fixing HDPE water tank of approved make with ISI mark andconforming to IS 12701 and with GI fittings for inlet, outlet, Overflow,

12 scour float valve, connections of required size and dia. Includingconnections and hoisting/fixing the same tank on roof and other placesat all heights 1 EA

with all bye-works complete at all leads and lifts as perdrawings, specifications and instructions of the Engineer Incharge.

Supplying and laying vitrified ceramic tiles with water absorption less than 0.08% and conforming to IS : 15622, of approved make, colour and design

at all levels and locations using approved first quality tiles inflooring with or without spacers, laid over abedding of cement mortar bed of mix 1:4 to

achieve overall flooring thickness as 50mm and a backcoat of white cement slurry and joints filled with white cement mixed with matching pigment

13 VITRIFIED 600x600x10 70 M2

complete with all bye works like covering

with plaster of paris, curing etc. at all leads and lifts and as perspecification / instructions of the Engineer Incharge.

Using 600mm x 600mm x minimum 10mm thk.

Providing and laying Granite flooring including flooring onkitchen counter slabs and wash basin counter slabs with 18mm - 20mm thickmarble stone

(sample of marble shall be approved by Entineer-in-charge)over 20mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarsesand) laid and

14 GRANITE SLAB 12 M2

jointed with grey/white cement slurry mixed with matching pigment, epoxy touch ups including rubbing, curing, and polishing to edgespolishing to

granolithic finish complete with Granite of any size, shape and shade

Supplying,fixing and / or laying, jointing and testing heavy duty 6kg/cm2 UPVC pipe ISI marked pipelines including ventilating pipe with all

UPVC WASTE PIP necessaryfittings and accessories like specials, bends, single and / or double,equal/unequal branches of required degrees with or without oval

150NB accessdoor, offsets of required projection, hill rest bend,inverted branch of required degree, traps, plugs, cowl, clamps etc., all conforming to IS code

, of approved make, with all leads and lifts, all complete as perspecification and direction of Engineer Incharge.

Construction of brick masonry inspection chamber with full bricks, in CM1:4 over 150mm thick PCC bedding of 1:4:8 grade, provided with a

heavyduty (HD-20) CI cover conforming to IS:1726, of required size,embedding the CI frame in 150 mm thick RCC top slab (1:1 1/2 :3), neatlyfinished

including 20mm thick plastering in two layers on both faces inCM 1:3 with water proofing compound mixed at the rate of 2% by weight of cement,

16 benching and rounding with PCC 1:2:4, float coat of neatcement finish on the inner side, etc., all complete includingexcavation, dewatering and 4 EA

backfilling, shuttering, curing etc.,painting the exposed CI cover with three coats of black bitumastic paintat all leads and lifts as per drawings,

specifications and instructionsof the Engineer Incharge.

INSP CHAMBER 455x610

Supply and Fitting of Sanitory Materials required for bathroom, Urinals and WC Indian. This includes all pipeline works required for tap from the

17 SANITORY FITTINGS 2 LS

HDPE tank to the drainage. Also, supply and fitting of 2 taps each in bathroom for purposes as instructed by Engineer incharge.

Supply, fitting and fixing of LED Tublelights 30w (approx 20 Nos.), Switch Boards 230 V, light switch,, RCCB and/or ELCB and/ or MCCB 30 mA,

18 ELECTRICAL WORKS Exhaust Fans 18X18 Inch 5 Blade of Atomberg, Havels or Torando (3 Nos.), 1 Nos. power points for heavy duty machinery upto 230 V including 2 LS

complete wiring charges and covering through cable covers and fixing of specified amperes as directed by officers incharge

Upgradation of Urinal Blocks at TLD Gantry and LPG Pumphouse

UPGRADATION OF The job includes complete revampation of Urinals (Replacement of old if required), wall repair, providing drainage, plaster and painting works, piping

EXISTING FACILITY works for drainage, provision of wash basins, connection of soakpit with toilet and soakpit.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m

20 SOAKPIT long complete as per standard design conforming to IS:2470. ( Rate is inclusive of top slab of required thickness & C.I. FRAME with cover) with 2 EA

common burnt clay F.P.S.(non modular) bricks of class designation