Special Repair work at JNV Balasore, Odisha

Name of Work: Special Repair work at JNV Balasore, Odisha

Sl. No. Description Amount DSR Amount Non-DSR

A REPAIR & RENOVATION FOR CIVIL WORK

Repair Work at School Building 62,32,876.98 26,574.27

Repair Work at Staff Quarter 35,40,697.04

Repair Work at Principal Quarter 3,34,542.07

Repair Work at Group D Quarter 18,99,375.28

Repair Work at 96 nos of boys unit 18,99,347.38

Repair Work at M.P. Hall 19,89,945.22 -

Repair Work at Kitchen & Dining 14,44,833.13 -

Repair Work at Boys Dormitory For 320 nos of Students 50,13,950.79 -

Repair Work at Girls Dormitory For 240 nos of Students 51,22,239.98 -

GRAND TOTAL 2,75,04,382.15

GRAND TOTAL 2,75,04,382.15

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF SCHOOL BUILDING - JNV, BALESORE, ODISHA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

A. Structural Repair & Retrofitting

Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including tapering of all edges,

1 26.28 making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and

disposal of debris for all lead and lifts all complete as per direction of

Engineer-In-Charge

A. 26.28.2 50mm average thickness Sqm 28.000 256.35 7177.800

B. 26.28.3 25 mm avarage thickness Sqm 37.800 126.75 4791.150

Cleaning of reinforcement from rust from the reinforcing bars to give

it a total rust free steel surface by using alkaline chemical rust

remover of approved make with paint brush and removing loose

particles after 24 hours of its application with wire brush and thoroughly

washing with water and allowing it to dry, all complete as per direction

of Engineer-In-Charge.

26.29.1 Bars upto 12 mm diameter Mtr 1052.80 8.25 8685.600

Cleaning of exposed concrete surface of sticking material including

loose and foreign material by sand blasting with coarse sand followed

by and including cleaning with oil free air blast as per direction of

Engineer in charge.

Shotcreting R.C.C. columns, beams and slabs etc. in layers with

approved design mix concrete having the specified minimum

characteristic compressive strength [with ordinary portland cement,

coarse sand and graded stone aggregate of 10 mm maximum size

in proportion as per design criteria] including the cost of centering

and shuttering at edges and corners etc. as directed by Engineer in-Charg

Note: Rates shall include the providing necessary ground wires etc.

The levelling gauges, if used, shall be paid for separately. Payment

under this item shall be made only after proper wet curing has been

done and surface has been satisfactorily evaluated by sounding/

tapping with a blunt metal instrument.

25mm thick in Grade M 25 with cement content not

less than 330 kg per cum

50mm thick in Grade M 25 with cement content not

less than 330 kg per cum

Providing and inserting 12mm dia galvanised steel injection nipple in

honey comb area and along crack line including drilling of holes of

required diametre (20mm to 30mm) up to depth from 30mm to 80mm

5 26.39 at required spacing and making the hole & crack dust free by blowing Nos 85.00 4079.29 346739.650

compressed air, sealing the distance between injection nipple with

adhesive chemical of approved make and allow it to cure complete

as per direction of Engineer-In-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm

mesh or other suitable size wire mesh to be fixed & firmly anchored

6 26.40 to the concrete surface by means of "L" shaped mild steel shear key Sqm 82.720 902.55 74658.936

welded with existing reinforcement including the cost of materials,

labour, tool & plants as approved by Engineer-in-charge.

Repair to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd

(Dr. Fixit Make) , including cutting the area of plaster in proper shape, raking out joints

7 and preparing and plastering the durface of the walls complete, including disposal of Sqm 725.061 657.40 476654.970

rubbish to the dumping ground, all complete as per direction of Engineer- in-Charge.

With cement mortar 1:4 (1cement: 4coarse sand)

Providing and applying white cement based putty of average thickness

8 13.80 1 mm, of approved brand and manufacturer, over the plastered wall Sqm 725.061 156.05 113145.738

surface to prepare the surface even and smooth complete.

Providing and fixing hand rail of approved size by welding etc. to steel ladder

9 10.26 railing, balcony railing, staircase railing and similar works, including applying

priming coat of approved steel primer.

Structural Repair & Retrofitting Works Total : 28,85,263.45 -

Say (In Lakhs): 28.85 -

B. Repairs to Roof

Demolishing mud phaska in terracing and disposal of material within

50 metres lead.

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen primer

for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

11 MR joints etc, and preparing the surface complete. The vital physical and chemical

parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal

and transverse direction as 300/250N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane : 5 mm thick

Painting (one or more coats) on rain water, soil waste and vent pipes

12 13.96 and fittings with synthetic enamel paint of approved brand and

manufacture and required colour on old work :

13.96.2 100 mm diameter pipes Mtr 157.00 36.25 5691.250

Repair to Roof Works Total : 18,02,591.69 -

Say (In Lakhs): 18.03 -

C. Repairs to Toilets

Demolishing R.C.C. work manually/ by mechanical means including stacking

13 15.3 of steel bars and disposal of unserviceable material within 50 metres lead as Cum 0.432 3551.25 1534.140

per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of

14 15.7 serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 7.121 2060.20 14670.272

Removing mortar from bricks and cleaning bricks including stacking within a

lead of 50 m (stacks of cleaned bricks shall be measured):

15.8.3 From brick work in cement mortar Nos 1.673 6700.80 11213.038

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 635.945 73.40 46678.392

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding

cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form

for all heights:

5.9.16 Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form

for all heights:

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 4.320 927.25 4005.720

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 33.912 107.85 3657.409

Brick work with common burnt clay F.P.S. (non modular) bricks of class

21 6.4 designation 7.5 in superstructure above plinth level up to floor V level in all shapes

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5.962 9105.95 54286.032

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.080 1123.80 11327.904

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every

third course of half brick masonry.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement mixed with pigment of matching shade

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

25 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 152.807 1096.55 167560.187

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

Providing and laying water proofing treatment to vertical and

26 22.30 horizontal surfaces of depressed portions of W.C., kitchen and the

like consisting of:

Ist course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS 2645 in

recommended proportions including rounding off junction of

vertical and horizontal surface.

IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse

sand) mixed with water proofing compound in recommended

proportion including rounding off junction of vertical and

horizontal surface.

IIIrd course of applying blown or residual bitumen applied hot

at 1.7 kg. per sqm of area.

IVth course of 400 micron thick PVC sheet. (Overlaps at joints

of PVC sheet should be 100 mm wide and pasted to each sqm 104.086 769.60 80104.432

other with bitumen @ 1.7 kg/sqm).

Supply and filling od Cinder in sunkan portion of toilet area including ramming etc

including all labour and T&P etc complete as per direction of Engineer-in-charge.

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

28 15.52 including stacking of useful materials near the site and disposal of Each 5.000 112.05 560.250

unserviceable materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

30 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single

15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

32 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 4.000 1607.95 6431.800

cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 3.000 6258.75 18776.250

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

joints, melting of lead and making into blocks including stacking of pipes

& lead at site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within

a lead of 50 metres

37 17.35 Providing and fixing soil, waste and vent pipes :

38 17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 85.000 1180.75 100363.750

39 17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 75.000 1186.00 88950.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

41 17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Providing and fixing trap of self cleansing design with screwed down or hinged

42 17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 5.000 1975.15 9875.750

43 17.57 Providing and fixing collar :

17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 15.000 513.15 7697.250

17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 10.000 362.05 3620.500

44 17.39 Providing and fixing plain bend of required degree.

17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 470.45 7056.750

17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 390.50 3905.000

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 705.20 10578.000

17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 522.80 5228.000

Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 15.000 726.55 10898.250

17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 10.000 629.50 6295.000

47 17.56 Providing and fixing terminal guard :

17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 506.00 7590.000

17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 404.75 4047.500

48 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 10.000 53.25 532.500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Mtr 65.000 497.80 32357.000

18.8.2 20 mm nominal dia Pipes Mtr 45.000 537.60 24192.000

18.8.3 25 mm nominal dia Pipes Mtr 35.000 627.25 21953.750

18.8.4 32 mm nominal dia Pipes Mtr 40.000 739.30 29572.000

50 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

51 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or as

56 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 1000.000 11.00 11000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

57 18.16 Providing and fixing brass stop cock of approved quality :

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

58 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion.

Total of sub-head (Water Supply Installations ) 6,36,212.50

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

62 19.24 including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-charge:

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 2.000 2540.85 5081.700

Raising manhole cover and frame slab to required level including dismantling

63 19.26 existing slab and making good the damage as required (Raising depth of

manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

18.75.3 25mm nominal bore, weighing not less than 62 gms Each 2.000 113.35 226.700

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

67 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 10.000 416.80 4168.000

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine

sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering

with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.000 1992.60 9963.000

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

69 18.33 stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat cement complete as

per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 49,280.05

Repairs to Toilets Works Total : 15,45,021.85 26,574.27

Say (In Lakhs): 15.45 0.27

Grand Total 62,59,451.26

Grand Total 62,59,451.26

Digitally signed by JAYA

NAME OF WORK:- REPAIR WORK OF 7no. OF STAFF QUARTERS - JNV, BALESORE, ODISHA

Amount on DSR - Amount on

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) Non DSR (In Rs)

Structural Repair & Retrofitting

Demolishing cement concrete manually/ by mechanical means including

1 15.2 disposal of material within 50 metres lead as per direction of Engineer - in -

1.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) Cum 104.650 2434.250 254744.263

15.19 Dismantling steel work in built up sections in angles, tees, flats and channels

including all gusset plates, bolts, nuts, cutting rivets, welding etc. including

dismantling and stacking within 50 metres lead.

15.44 Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of Engineer-

Structural Repair & Retrofitting Works Total : 2,63,088.26 -

Say (In Lakhs): 2.63 -

Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black

reinforced with non-woven polyester matt consisting of a coat of bitumen

for bitumen membrane @ 0.40 litre/sqm by the same membrane

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

joints etc, and preparing the surface complete. The vital physical and

parameters of the membrane shall be as under : Joint strength in

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in

Repair to Roof Works Total : 6,64,800.50 -

Say (In Lakhs): 6.65 -

Repairs to Toilets

15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

5.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 9.180 73.4 673.812

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

6 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over Sqm 176.400 1267.950 223666.380

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm

or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in colours White, Ivory,

7 11.39 Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Sqm 181.440 1330.000 241315.200

Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments

etc., complete.

Providing and fixing P.V.C. low level flushing cistern with manually controlled

8 17.18 device (handle lever) conforming to IS : 7231, with all fittings and fixtures

8.1 17.18.1 10 litre capacity - White each 8.000 1190.650 9525.200

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

9 15.52 stacking of useful materials near the site and disposal of unserviceable each 8.000 112.050 896.400

materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

11 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15

mm C.P. brass pillar tap

Digitally signed by JAYA

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

13 17.31 approved quality) complete with 6 mm thick hard board ground fixed to Each 4.000 1607.95 6431.800

wooden cleats with C.P. brass screws and washers complete.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after taking

out the pipes, manually/ by mechanical means breaking lead caulked joints,

melting of lead and making into blocks including stacking of pipes & lead at

site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within a

lead of 50 metres

17 17.35 Providing and fixing soil, waste and vent pipes : 0.000

100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:

17.1.1 17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 10.000 1186.00 11860.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete

19 17.37 blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), including cost of cutting holes and making

good the walls etc. :

Providing and fixing trap of self cleansing design with screwed down or

20 17.60 hinged grating with or without vent arm complete, including cost of cutting

and making good the walls and floors :

20.1 17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 1.000 1975.15 1975.150

21 17.57 Providing and fixing collar :

21.1 17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 4.000 513.15 2052.600

21.1.1 17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 4.000 362.05 1448.200

22 17.39 Providing and fixing plain bend of required degree.

22.1 17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 4.000 470.45 1881.800

22.1.1 17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 4.000 390.50 1562.000

Providing and fixing bend of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

23.1 17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 4.000 705.20 2820.800

23.1.1 17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 4.000 522.80 2091.200

Providing and fixing single equal plain junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

24.1 17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 4.000 726.55 2906.200

24.1.1 17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 4.000 629.50 2518.000

25 17.56 Providing and fixing terminal guard :

25.1 17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 5.000 506.00 2530.000

25.1.1 17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 5.000 404.75 2023.750

26 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 2.000 53.25 106.500

Digitally signed by JAYA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

28 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage loft

tank with cover, conforming to ISI : 12701, colour of opaque white or as

33 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 1000.000 11.00 11000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

34 18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

toIS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS

:13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

Total of sub-head (Water Supply Installations ) 4,34,643.20

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-

39.1 19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 7.000 2540.85 17785.950

Digitally signed by JAYA

Raising manhole cover and frame slab to required level including

40 19.26 dismantling existing slab and making good the damage as required (Raising

depth of manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

42.1 18.75.3 25mm nominal bore, weighing not less than 62 gms Each 4.000 113.35 453.400

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

44 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

44.1 18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 10.000 416.80 4168.000

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

45 18.32 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm

thick, finished with a floating coat of neat cement complete as per standard

45.1 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 7.000 1992.60 13948.200

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)

with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4

46 18.33 graded stone aggregate 20mm nominal size ) , i/c necessary excavation,

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement mortar

1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

46.1 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 82,785.60

Repairs to Toilets Works Total : 10,71,023.19 -

Say (In Lakhs): 10.71 -

Repairs to Door/Windows

Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

57.1 15.13.1 Of area 3 sq. metres and below each 392.000 143.5 56252.000

Extra for providing frosted glass panes 4 mm thick (weight not less than 10

kg per qm) instead of ordinary float glass panes 4 mm thick (weight not less

58 9.12 than 10 kg per sqm) in doors, windows and clerestory window shutters. Sqm 0.000 176.400 0.000

(Area of opening for glass panes excluding portion inside rebate shall be

59 14.9 Renewal of old putty of glass panes (length) Mtr 0.000 56.15 0.000

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of

virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) having minimum density of 650

kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

60 26.87 minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property

of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel butt hinges of required size with necessary full

body threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In Charge. (Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Digitally signed by JAYA

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of

average width of aperture 1.4 mm in both directions with wire of dia 0.63

mm, for doors, windows and clerestory windows with hinges and necessary

61.1 9.27.2 30 mm thick shutters

61.1.2 9.27.2.2 With ISI marked stainless steel butt hinges of required size

61.1.3 9.27.2.2.2 Kiln seasoned and chemically treated hollock wood Sqm 0.000 3447.800 0.000

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and

screws etc. complete : (Copper oxidized as per IS 1378).

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws

63.1 9.101.2 Twin rubber stopper Nos 16.000 72.350 1157.600

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild

steel welded or rigidly fixed together by mechanical means, including M.S.

pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and

shock absorbers as specified and applying a coat of approved steel primer

after pre-treatment of the surface as directed by Engineer-in-charge:

Providing and fixing factory made ISI marked steel glazed doors, windows

and ventilators, side /top /centre hung, with beading and all members such

as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections,

joints mitred and flash butt welded and sash bars tenoned and riveted,

including providing and fixing of hinges, pivots, including priming coat of

approved steel primer, but excluding the cost of other fittings, complete all

as per approved design, (sectional weight of only steel members shall be

measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

65.1 10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone Kg 0.000 131.050 0.000

aggregate 20 mm nominal size) @22 Kg/Sqm

Providing and fixing M.S. grills of required pattern in frames of windows etc.

66 9.48 with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete.

66.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0.000 238.350 0.000

67 13.50 Applying priming coat:

With ready mixed aluminum primer of approved brand and manufacture on

resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

Providing and fixing fly proof galvanized M.S. wire gauge to windows

and clerestory windows using wire gauge with average width of aperture 1.4

mm in both directions with wire of dia 0.63 mm all complete.

69.1 9,51,1 With 2nd class teak wood beading 62X19 mm Sqm 65.690 1308.35 85945.512

Repairs to Door/Windows Works Total : 15,41,785.09 -

Say (In Lakhs): 15.42

Grand Total 35,40,697.04

Grand Total 35,40,697.04

Digitally signed by JAYA

NAME OF WORK:- REPAIR WORK OF PRINCIPAL QUARTERS - JNV, BALESORE, ODISHA

Amount on DSR - Amount on

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) Non DSR (In Rs)

Structural Repair & Retrofitting

Demolishing cement concrete manually/ by mechanical means including

1 15.2 disposal of material within 50 metres lead as per direction of Engineer - in -

1.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) Cum 10.350 2434.250 25194.488

15.19 Dismantling steel work in built up sections in angles, tees, flats and channels

including all gusset plates, bolts, nuts, cutting rivets, welding etc. including

dismantling and stacking within 50 metres lead.

15.44 Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of Engineer-

Structural Repair & Retrofitting Works Total : 35,036.49 -

Say (In Lakhs): 0.35 -

Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black

reinforced with non-woven polyester matt consisting of a coat of bitumen

for bitumen membrane @ 0.40 litre/sqm by the same membrane

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

joints etc, and preparing the surface complete. The vital physical and

parameters of the membrane shall be as under : Joint strength in

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in

Repair to Roof Works Total : 65,749.50 -

Say (In Lakhs): 0.66 -

Repairs to Toilets

15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

5.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 5.000 73.4 367.000

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

6 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over Sqm 22.680 1267.950 28757.106

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm

or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in colours White, Ivory,

7 11.39 Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Sqm 7.290 1330.000 9695.700

Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments

etc., complete.

Providing and fixing P.V.C. low level flushing cistern with manually controlled

8 17.18 device (handle lever) conforming to IS : 7231, with all fittings and fixtures

8.1 17.18.1 10 litre capacity - White each 1.000 1190.650 1190.650

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

9 15.52 stacking of useful materials near the site and disposal of unserviceable each 1.000 112.050 112.050

materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

11 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15

mm C.P. brass pillar tap

Digitally signed by JAYA

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

13 17.31 approved quality) complete with 6 mm thick hard board ground fixed to Each 1.000 1607.95 1607.950

wooden cleats with C.P. brass screws and washers complete.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after taking

out the pipes, manually/ by mechanical means breaking lead caulked joints,

melting of lead and making into blocks including stacking of pipes & lead at

site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within a

lead of 50 metres

17 17.35 Providing and fixing soil, waste and vent pipes :

100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:

17.1.1 17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 1.000 1186.00 1186.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete

19 17.37 blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), including cost of cutting holes and making

good the walls etc. :

Providing and fixing trap of self cleansing design with screwed down or

20 17.60 hinged grating with or without vent arm complete, including cost of cutting

and making good the walls and floors :

20.1 17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 1.000 1975.15 1975.150

21 17.57 Providing and fixing collar :

21.1 17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 1.000 513.15 513.150

21.1.1 17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 1.000 362.05 362.050

22 17.39 Providing and fixing plain bend of required degree.

22.1 17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 1.000 470.45 470.450

22.1.1 17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 1.000 390.50 390.500

Providing and fixing bend of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

23.1 17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 1.000 705.20 705.200

23.1.1 17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 1.000 522.80 522.800

Providing and fixing single equal plain junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

24.1 17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 1.000 726.55 726.550

24.1.1 17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 1.000 629.50 629.500

25 17.56 Providing and fixing terminal guard :

25.1 17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 1.000 506.00 506.000

25.1.1 17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 1.000 404.75 404.750

26 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 1.000 53.25 53.250

Digitally signed by JAYA

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

28 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage loft

tank with cover, conforming to ISI : 12701, colour of opaque white or as

33 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 1000.000 11.00 11000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

34 18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

toIS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS

:13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

Total of sub-head (Water Supply Installations ) 41,336.25

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-

39.1 19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 3.000 2540.85 7622.550

Digitally signed by JAYA

Raising manhole cover and frame slab to required level including

40 19.26 dismantling existing slab and making good the damage as required (Raising

depth of manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

42.1 18.75.3 25mm nominal bore, weighing not less than 62 gms Each 4.000 113.35 453.400

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

44 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

44.1 18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 1.000 416.80 416.800

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

45 18.32 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm

thick, finished with a floating coat of neat cement complete as per standard

45.1 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 1992.60 1992.600

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)

with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4

46 18.33 graded stone aggregate 20mm nominal size ) , i/c necessary excavation,

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement mortar

1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

46.1 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 35,431.60

Repairs to Toilets Works Total : 1,29,263.21 -

Say (In Lakhs): 1.29 -

Repairs to Door/Windows

Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

57.1 15.13.1 Of area 3 sq. metres and below each 16.000 143.5 2296.000

Extra for providing frosted glass panes 4 mm thick (weight not less than 10

kg per qm) instead of ordinary float glass panes 4 mm thick (weight not less

58 9.12 than 10 kg per sqm) in doors, windows and clerestory window shutters. Sqm 0.000 176.400 0.000

(Area of opening for glass panes excluding portion inside rebate shall be

59 14.9 Renewal of old putty of glass panes (length) Mtr 0.000 56.15 0.000

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of

virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) having minimum density of 650

kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

60 26.87 minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property

of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel butt hinges of required size with necessary full

body threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In Charge. (Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Digitally signed by JAYA

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of

average width of aperture 1.4 mm in both directions with wire of dia 0.63

mm, for doors, windows and clerestory windows with hinges and necessary

61.1 9.27.2 30 mm thick shutters

61.1.2 9.27.2.2 With ISI marked stainless steel butt hinges of required size

61.1.3 9.27.2.2.2 Kiln seasoned and chemically treated hollock wood Sqm 0.000 3447.800 0.000

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and

screws etc. complete : (Copper oxidized as per IS 1378).

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws

63.1 9.101.2 Twin rubber stopper Nos 0.000 72.350 0.000

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild

steel welded or rigidly fixed together by mechanical means, including M.S.

pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and

shock absorbers as specified and applying a coat of approved steel primer

after pre-treatment of the surface as directed by Engineer-in-charge:

Providing and fixing factory made ISI marked steel glazed doors, windows

and ventilators, side /top /centre hung, with beading and all members such

as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections,

joints mitred and flash butt welded and sash bars tenoned and riveted,

including providing and fixing of hinges, pivots, including priming coat of

approved steel primer, but excluding the cost of other fittings, complete all

as per approved design, (sectional weight of only steel members shall be

measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

65.1 10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone Kg 0.000 131.050 0.000

aggregate 20 mm nominal size) @22 Kg/Sqm

Providing and fixing M.S. grills of required pattern in frames of windows etc.

66 9.48 with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete.

66.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0.000 238.350 0.000

67 13.50 Applying priming coat:

With ready mixed aluminum primer of approved brand and manufacture on

resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

Providing and fixing fly proof galvanized M.S. wire gauge to windows

and clerestory windows using wire gauge with average width of aperture 1.4

mm in both directions with wire of dia 0.63 mm all complete.

69.1 9,51,1 With 2nd class teak wood beading 62X19 mm Sqm 0.000 1308.35 0.000

Repairs to Door/Windows Works Total : 1,04,492.88 -

Say (In Lakhs): 1.04

Grand Total 3,34,542.07

Grand Total 3,34,542.07

Digitally signed by JAYA

NAME OF WORK:- REPAIR WORK OF PRINCIPAL QUARTERS - JNV, BALESORE, ODISHA

Amount on DSR - Amount on

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) Non DSR (In Rs)

Structural Repair & Retrofitting

Demolishing cement concrete manually/ by mechanical means including

1 15.2 disposal of material within 50 metres lead as per direction of Engineer - in -

1.1 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalentdesign mix) Cum 58.650 2434.250 142768.763

15.19 Dismantling steel work in built up sections in angles, tees, flats and channels

including all gusset plates, bolts, nuts, cutting rivets, welding etc. including

dismantling and stacking within 50 metres lead.

15.44 Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of Engineer-

Structural Repair & Retrofitting Works Total : 1,52,610.76 -

Say (In Lakhs): 1.53 -

Repairs to Roof

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black

reinforced with non-woven polyester matt consisting of a coat of bitumen

for bitumen membrane @ 0.40 litre/sqm by the same membrane

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

joints etc, and preparing the surface complete. The vital physical and

parameters of the membrane shall be as under : Joint strength in

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in

Extra for covering top of membrane with Geotextile 120 gsmnon woven

100% polyster of thickness 1 to 1.25MM bnded to membrane with

intermittent touch by heating the membrane by Butane Torch as per

manufacturer recommendation

Repair to Roof Works Total : 3,72,580.50 -

Say (In Lakhs): 3.73 -

Repairs to Toilets

15.23 Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

5.1 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 9.180 73.4 673.812

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:

15622 (thickness to be specified by the manufacturer), of approved make, in

all colours, shades except burgundy, bottle green, black of any size as

6 8.31 approved by Engineer-in-Charge, in skirting, risers of steps and dados, over Sqm 176.400 1267.950 223666.380

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and

jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm

or more (thickness to be specified by the manufacturer), of 1st quality

conforming to IS : 15622, of approved make, in colours White, Ivory,

7 11.39 Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Sqm 181.440 1330.000 241315.200

Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm

including grouting the joints with white cement and matching pigments

etc., complete.

Providing and fixing P.V.C. low level flushing cistern with manually controlled

8 17.18 device (handle lever) conforming to IS : 7231, with all fittings and fixtures

8.1 17.18.1 10 litre capacity - White each 7.000 1190.650 8334.550

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including

9 15.52 stacking of useful materials near the site and disposal of unserviceable each 7.000 112.050 784.350

materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with

integral type foot rests

Digitally signed by JAYA

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

11 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of

fittings and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15

mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

13 17.31 approved quality) complete with 6 mm thick hard board ground fixed to Each 4.000 1607.95 6431.800

wooden cleats with C.P. brass screws and washers complete.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after taking

out the pipes, manually/ by mechanical means breaking lead caulked joints,

melting of lead and making into blocks including stacking of pipes & lead at

site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within a

lead of 50 metres

17 17.35 Providing and fixing soil, waste and vent pipes : 0.000

100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:

17.1.1 17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 10.000 1186.00 11860.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron

pipes and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete

19 17.37 blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), including cost of cutting holes and making

good the walls etc. :

Providing and fixing trap of self cleansing design with screwed down or

20 17.60 hinged grating with or without vent arm complete, including cost of cutting

and making good the walls and floors :

20.1 17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 1.000 1975.15 1975.150

21 17.57 Providing and fixing collar :

21.1 17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 4.000 513.15 2052.600

21.1.1 17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 4.000 362.05 1448.200

22 17.39 Providing and fixing plain bend of required degree.

22.1 17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 4.000 470.45 1881.800

22.1.1 17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 4.000 390.50 1562.000

Providing and fixing bend of required degree with access door, insertion

rubber washer 3 mm thick, bolts and nuts complete.

23.1 17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 4.000 705.20 2820.800

23.1.1 17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 4.000 522.80 2091.200

Providing and fixing single equal plain junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts complete.

24.1 17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 4.000 726.55 2906.200

24.1.1 17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 4.000 629.50 2518.000

25 17.56 Providing and fixing terminal guard :

25.1 17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 5.000 506.00 2530.000

Digitally signed by JAYA

25.1.1 17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 5.000 404.75 2023.750

26 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 2.000 53.25 106.500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the same including testing of

joints complete as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

28 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage loft

tank with cover, conforming to ISI : 12701, colour of opaque white or as

33 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 1000.000 11.00 11000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

34 18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

conforming to IS : 13592 Type A, including jointing with seal ring conforming

toIS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS

:13592 Type A, including jointing with seal ring conforming to IS : 5382,

leaving 10 mm gap for thermal expansion.

Total of sub-head (Water Supply Installations ) 3,81,396.95

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Digitally signed by JAYA

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-

39.1 19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 7.000 2540.85 17785.950

Raising manhole cover and frame slab to required level including

40 19.26 dismantling existing slab and making good the damage as required (Raising

depth of manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

42.1 18.75.3 25mm nominal bore, weighing not less than 62 gms Each 4.000 113.35 453.400

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

44 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

44.1 18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 10.000 416.80 4168.000

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

45 18.32 nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1

cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and

inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm

thick, finished with a floating coat of neat cement complete as per standard

45.1 18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 7.000 1992.60 13948.200

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside)

with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4

46 18.33 graded stone aggregate 20mm nominal size ) , i/c necessary excavation,

foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone

aggregate 40 mm nominal size) and inside plastering with cement mortar

1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of

neat cement complete as per standard design :

46.1 18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 82,785.60

Repairs to Toilets Works Total : 10,07,588.54 -

Say (In Lakhs): 10.08 -

Repairs to Door/Windows

Taking out doors, windows and clerestory window shutters (steel or wood)

including stacking within 50 metres lead :

57.1 15.13.1 Of area 3 sq. metres and below each 120.000 143.5 17220.000

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of

virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and

natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) having minimum density of 650

kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),

60 26.87 minimum compressive strength 50 N/mm2, modulus of elasticity 850

N/mm2 and resistance to spread of flame of Class A category with property

of being termite/borer proof, water/moisture proof and fire retardant and

fixing with stainless steel butt hinges of required size with necessary full

body threaded star headed counter sunk S.S screws, all as per direction of

Engineer-In Charge. (Note: stainless steel butt hinges and necessary S.S

screws shall be paid separately)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of

average width of aperture 1.4 mm in both directions with wire of dia 0.63

mm, for doors, windows and clerestory windows with hinges and necessary

Digitally signed by JAYA

61.1 9.27.2 30 mm thick shutters

61.1.2 9.27.2.2 With ISI marked stainless steel butt hinges of required size

61.1.3 9.27.2.2.2 Kiln seasoned and chemically treated hollock wood Sqm 0.000 3447.800 0.000

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and

screws etc. complete : (Copper oxidized as per IS 1378).

Providing and fixing aluminium hanging floor door stopper, ISI marked,

anodised (anodic coating not less than grade AC 10 as per IS : 1868)

transparent or dyed to required colour and shade, with necessary screws

63.1 9.101.2 Twin rubber stopper Nos 36.000 72.350 2604.600

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness,

including hinges, jamb, lock jamb, bead and if required angle threshold of

mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild

steel welded or rigidly fixed together by mechanical means, including M.S.

pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and

shock absorbers as specified and applying a coat of approved steel primer

after pre-treatment of the surface as directed by Engineer-in-charge:

Providing and fixing factory made ISI marked steel glazed doors, windows

and ventilators, side /top /centre hung, with beading and all members such

as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections,

joints mitred and flash butt welded and sash bars tenoned and riveted,

including providing and fixing of hinges, pivots, including priming coat of

approved steel primer, but excluding the cost of other fittings, complete all

as per approved design, (sectional weight of only steel members shall be

measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

65.1 10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone Kg 131.050 0.000

aggregate 20 mm nominal size) @22 Kg/Sqm

Providing and fixing M.S. grills of required pattern in frames of windows etc.

66 9.48 with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete.

66.1 9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 238.350 0.000

67 13.50 Applying priming coat:

With ready mixed aluminum primer of approved brand and manufacture on

resinous wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

Providing and fixing fly proof galvanized M.S. wire gauge to windows

and clerestory windows using wire gauge with average width of aperture 1.4

mm in both directions with wire of dia 0.63 mm all complete.

69.1 9,51,1 With 2nd class teak wood beading 62X19 mm Sqm 1308.35 0.000

Repairs to Door/Windows Works Total : 3,66,595.47 -

Say (In Lakhs): 3.67

Grand Total 18,99,375.28

Grand Total 18,99,375.28

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF 0.5 UNIT FOR 96 nos OF BOYS - JNV, BALESORE, ODISHA

Amount on DSR -

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs) Non DSR (In

A. Structural Repair & Retrofitting

B. Repairs to Roof

Painting (one or more coats) on rain water, soil waste and vent pipes

1 13.96 and fittings with synthetic enamel paint of approved brand and

manufacture and required colour on old work :

13.96.2 100 mm diameter pipes Mtr 43.80 36.250 1587.750

Repair to Roof Works Total : 1,587.75 -

Say (In Lakhs): 0.16 -

C. Repairs to Toilets

Demolishing cement concrete manually/ by mechanical means including

2 15.2 disposal of material within 50 metres lead as per direction of Engineer - in

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 2.194 10852.950 23808.659

Demolishing R.C.C. work manually/ by mechanical means including stacking

3 15.3 of steel bars and disposal of unserviceable material within 50 metres lead as Cum 0.336 3551.250 1193.220

per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of

4 15.7 serviceable material and disposal of unserviceable material within 50 metres

lead as per direction of Engineer-in-charge.

15.7.4 In cement mortar Cum 4.140 2060.200 8529.228

Removing mortar from bricks and cleaning bricks including stacking within a

lead of 50 m (stacks of cleaned bricks shall be measured):

15.8.3 From brick work in cement mortar Nos 0.973 6700.800 6519.208

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 627.61 73.40 46066.904

Providing and laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding

the cost of centering and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources Cum 1.463 7878.500 11522.306

Reinforced cement concrete work in walls (any thickness), including attached

pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,

abutments, posts and struts etc. above plinth level up to floor five level, excluding

cost of centering, shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form

for all heights:

5.9.16 Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form

for all heights:

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 3.360 927.250 3115.560

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 26.376 107.850 2844.652

Brick work with common burnt clay F.P.S. (non modular) bricks of class

13 6.4 designation 7.5 in superstructure above plinth level up to floor V level in all shapes

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 2.981 9105.950 27143.016

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.080 1123.800 11327.904

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every

third course of half brick masonry.

Digitally signed by JAYA

Amount on DSR -

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs) Non DSR (In

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,

in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

17 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 107.460 1096.550 117834.715

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

18 15.52 including stacking of useful materials near the site and disposal of Each 5.000 112.05 560.250

unserviceable materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

20 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single

15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

22 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 4.000 1607.95 6431.800

cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 3.000 6258.75 18776.250

Providing and fixing PTMT towel rail complete with brackets fixed to wooden

24 17.73 cleats with CP brass screws with concealed fittings arrangement of approved

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective

height of 88 mm, weighing not less than 190 gms.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

joints, melting of lead and making into blocks including stacking of pipes

& lead at site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

27 15.52 including stacking of useful materials near the site and disposal of Each 5.000 112.05 560.250

unserviceable materials within 50 metres lead.

Dismantling of C.I. sluice valve including stacking of useful materials within

a lead of 50 metres

29 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 65.000 1180.75 76748.750

17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 85.000 1186.00 100810.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Digitally signed by JAYA

Amount on DSR -

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs) Non DSR (In

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

31 17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Providing and fixing trap of self cleansing design with screwed down or hinged

32 17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 5.000 1975.15 9875.750

33 17.57 Providing and fixing collar :

17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 38.000 513.15 19499.700

17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 48.000 362.05 17378.400

34 17.39 Providing and fixing plain bend of required degree.

17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 470.45 17877.100

17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 390.50 18744.000

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 705.20 26797.600

17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 522.80 25094.400

Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 38.000 726.55 27608.900

17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 48.000 629.50 30216.000

37 17.56 Providing and fixing terminal guard :

17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 506.00 19228.000

17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 404.75 19428.000

38 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 10.000 53.25 532.500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Mtr 60.000 497.80 29868.000

18.8.2 20 mm nominal dia Pipes Mtr 75.000 537.60 40320.000

18.8.3 25 mm nominal dia Pipes Mtr 80.000 627.25 50180.000

18.8.4 32 mm nominal dia Pipes Mtr 65.000 739.30 48054.500

40 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

41 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Digitally signed by JAYA

Amount on DSR -

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs) Non DSR (In

Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or as

47 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 4500.000 11.00 49500.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

48 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion.

Total of sub-head (Water Supply Installations ) 8,34,272.65

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

52 19.24 including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-charge:

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 2.000 2540.85 5081.700

Raising manhole cover and frame slab to required level including dismantling

53 19.26 existing slab and making good the damage as required (Raising depth of

manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

18.75.3 25mm nominal bore, weighing not less than 62 gms Each 2.000 113.35 226.700

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

57 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 6.000 416.80 2500.800

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe

etc. and repairing the hole after insertion of drain pipe etc. with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), including finishing complete so as to make it leak proof.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine

sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering

with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.000 1992.60 9963.000

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

60 18.33 stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat cement complete as

per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 55,662.35

Digitally signed by JAYA

Amount on DSR -

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs) Non DSR (In

Repairs to Toilets Works Total : 18,97,759.63 -

Say (In Lakhs): 18.98 -

Grand Total 18,99,347.38 -

Grand Total 18,99,347.38 -

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF M.P. HALL - JNV, BALESORE, ODISHA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

A. Structural Repair & Retrofitting

Repair to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd

(Dr. Fixit Make) , including cutting the area of plaster in proper shape, raking out joints

1 and preparing and plastering the durface of the walls complete, including disposal of Sqm 253.120 657.400 166401.088

rubbish to the dumping ground, all complete as per direction of Engineer- in-Charge.

With cement mortar 1:4 (1cement: 4coarse sand)

Providing and applying white cement based putty of average thickness

2 13.80 1 mm, of approved brand and manufacturer, over the plastered wall Sqm 253.120 156.050 39499.376

surface to prepare the surface even and smooth complete.

Structural Repair & Retrofitting Works Total : 2,05,900.46 -

Say (In Lakhs): 2.06 -

B. Repairs to Roof

Demolishing mud phaska in terracing and disposal of material within

50 metres lead.

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen primer

for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

4 M.R joints etc, and preparing the surface complete. The vital physical and chemical Sqm 151.30 730.55 110532.215

parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal

and transverse direction as 300/250N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane : 5 mm Thick

Dismantling cement asbestos or other hard board ceiling or partition walls

5 15.41 including stacking of serviceable materials and disposal of unserviceable Sqm 598.85 56.350 33745.198

materials within 50 metres lead.

Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up

to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts

8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins,

rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel

6 12.47 rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under

approximately 2400 psi and hot cured. They shall be of uniform pigmentation

and thickness without air pockets and shall conform to IS 10192 and IS 12866.The

sheets shall be opaque or translucent, clear or pigmented, textured or smooth

2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as

Providing and fixing false ceiling at all height including providing and fixing of frame work

made of special sections, power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats

of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre

to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre

to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips

7 12.45 made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing

perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm

centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum

board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5

x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and

square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint

and two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as per drawings,

specification and direction of the Engineer in Charge but excluding the cost of painting

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

:2011 (Board with BIS certification marks)

Repair to Roof Works Total : 9,97,309.22 -

Say (In Lakhs): 9.97 -

C. Repairs to Toilets

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 173.958 73.40 12768.517

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours, shades

except burgundy, bottle green, black of any size as approved by Engineer-in-Charge,

in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1

cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

9 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 5.448 1096.550 5974.004

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

12 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 2.000 1607.95 3215.900

cleats with C.P. brass screws and washers complete.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

15.44.1 15 mm to 40 mm nominal bore Mtr 66 149.80 9909.270

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including

stacking the material within 50 metres lead :

17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 25.000 1180.75 29518.750

17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 13.000 1186.00 15418.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Providing and fixing trap of self cleansing design with screwed down or hinged

17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 4.000 1975.15 7900.600

17.57 Providing and fixing collar :

17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 2.000 513.15 1026.300

17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 2.000 362.05 724.100

17.39 Providing and fixing plain bend of required degree.

17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 14.000 470.45 6586.300

17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 7.000 390.50 2733.500

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 14.000 705.20 9872.800

17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 7.000 522.80 3659.600

Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 14.000 726.55 10171.700

17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 7.000 629.50 4406.500

17.56 Providing and fixing terminal guard :

17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 14.000 506.00 7084.000

17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 7.000 404.75 2833.250

17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 4.000 53.25 213.000

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Mtr 40.000 497.80 19912.000

18.8.2 20 mm nominal dia Pipes Mtr 30.000 537.60 16128.000

18.8.3 25 mm nominal dia Pipes Mtr 129.500 627.25 81228.875

18.8.4 32 mm nominal dia Pipes Mtr 60.000 739.30 44358.000

18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking arrangement

and making necessary holes for inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Total of sub-head (Water Supply Installations ) 5,69,545.53

Repairs to Toilets Works Total : 5,69,545.53 -

Say (In Lakhs): 5.70 -

E. Repairs to Door/Windows

Dismantling doors, windows and clerestory windows (steel or wood) shutter

19 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within

50 metres lead :

15.12.1 Of area 3 sq. metres and below Nos 57.000 367.20 20930.400

Providing and fixing T-iron frames for doors, windows and ventilators of mild

20 10.13 steel Tee-sections, joints mitred and welded, including fixing of necessary butt

hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

10.13.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate Kg 0.000 141.700 0.000

20 mm nominal size).

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including

hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle

of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or

rigidly fixed together by mechanical means, including M.S. pressed butt hinges

2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as

specified and applying a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

Providing and fixing factory made ISI marked steel glazed doors, windows and

ventilators, side /top /centre hung, with beading and all members such as

F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints

22 10.11 mitred and flash butt welded and sash bars tenoned and riveted, including

providing and fixing of hinges, pivots, including priming coat of approved steel

primer, but excluding the cost of other fittings, complete all as per approved

design, (sectional weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate Kg 0.000 131.050 0.000

20 mm nominal size) @22 Kg/Sqm

Providing and fixing M.S. grills of required pattern in frames of windows etc.

23 9.48 with M.S. flats, square or round bars etc. including priming coat with approved

steel primer all complete.

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0.000 238.350 0.000

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of virgin

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum

24 26.87 compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary full body threaded

star headed counter sunk S.S screws, all as per direction of Engineer-In

Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be

paid separately)

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and

screws etc. complete : (Copper oxidized as per IS 1378).

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel

type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating

27 9.100 not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised

28 9.101 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed

to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 0.000 72.350 0.000

29 13.50 Applying priming coat:

With ready mixed aluminum primer of approved brand and manufacture on resinous

wood and plywood

With ready mixed red oxide zinc chromate primer of approved brand and

manufacture on steel galvanised iron/ steel works

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

Providing & fixing glass panes with putty and glazing clips in steel doors,

windows, clerestory windows, all complete with :

10.30.1 Float glass panes of thickness 4 mm Sqm 0.000 1064.650 0.000

Providing and fixing fly proof galvanized M.S. wire gauge to windows

and clerestory windows using wire gauge with average width of aperture 1.4 mm in both

directions with wire of dia 0.63 mm all complete.

69.1 9,51,1 With 2nd class teak wood beading 62X19 mm Sqm 0.000 1308.35 0.000

Repairs to Door/Windows Works Total : 2,17,190.01 -

Say (In Lakhs): 2.17

Grand Total 19,89,945.22 -

Grand Total 19,89,945.22 -

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF KITCHEN & DINING - JNV, BALESORE, ODISHA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

A. Structural Repair & Retrofitting

Repair to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd

(Dr. Fixit Make) , including cutting the area of plaster in proper shape, raking out joints

1 and preparing and plastering the durface of the walls complete, including disposal of Sqm 167.850 657.400 110344.590

rubbish to the dumping ground, all complete as per direction of Engineer- in-Charge.

With cement mortar 1:4 (1cement: 4coarse sand)

Providing and applying white cement based putty of average thickness

2 13.80 1 mm, of approved brand and manufacturer, over the plastered wall Sqm 167.850 156.050 26192.993

surface to prepare the surface even and smooth complete.

Structural Repair & Retrofitting Works Total : 1,36,537.58 -

Say (In Lakhs): 1.37 -

B. Repairs to Roof

Demolishing mud phaska in terracing and disposal of material within

50 metres lead.

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen primer

for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

4 14.91 joints etc, and preparing the surface complete. The vital physical and chemical Sqm 878.6 0.00

parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal

and transverse direction as 300/250N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

Providing and fixing precoated galvanised iron profile sheets (size, shape and

pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %)

total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in

240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 microns. Sheet should have protective guard film of 25

5 12.50 microns minimum to avoid scratches during transportation and should be Sqm 738.650 0.000

supplied in single length upto 12 metre or as desired by Engineer-in-charge.

The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55

mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved

surfaces, excluding the cost of purlins, rafters and trusses and including cutting

to size and shape wherever required.

Providing and fixing false ceiling at all heights with integral densified calcium

silicate reinforced with fibre and natural filler false ceiling tiles of Size

595x595mm of approved texture, design and patterns as per CPWD

Specification 2019, to be laid in true horizontal level suspended on inter-locking

metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized

@ 120 grams per sqm including both sides)comprising of main-T runners

of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length

1200 mm and secondaryintermediate cross-T of size 24x32 mm of length

600mm to formgrid module of size 600 x 600 mm, suspended from ceiling

6 26.22 usinggalvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 12x50

mm long dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm

length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and

Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to

pierce into 12x50mm or even bigger size dash fastener if require, fixed with

Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000

mm to be fixed on periphey wall / partition with the help of plastic rawl plugs

at 450mm center to center and 40 mm long dry wall S.S screws. The workshall

be carried out as per specifications, drawing and as per directionsof the

Engineer-in-Charge.

26.22.1 With 15 mm thick Tegular edged light weight calcium sliciate false ceiling tiles Sqm 2207.000 0.000

Painting (one or more coats) on rain water, soil waste and vent pipes

7 13.96 and fittings with synthetic enamel paint of approved brand and

manufacture and required colour on old work :

13.96.2 100 mm diameter pipes Mtr 36.250 0.000

Repair to Roof Works Total : - -

Say (In Lakhs): - -

C. Repairs to Toilets

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

8 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer Cum 0.924 3551.250 3281.355

Demolishing brick work manually/ by mechanical means including stacking of serviceable

9 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

15.7.4 In cement mortar Cum 2.650 2060.200 5458.706

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m

(stacks of cleaned bricks shall be measured):

15.8.3 From brick work in cement mortar Nos 0.623 6700.800 4172.293

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm sqm 349.172 73.40 25629.254

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding cost of centering,

shuttering, finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.16 Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 9.240 927.250 8567.790

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 72.534 107.850 7822.792

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5

in superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 1.490 9105.950 13571.508

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 10.080 1123.800 11327.904

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

course of half brick masonry.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar

1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per

sqm, including pointing in white cement mixed with pigment of matching shade

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

20 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 27.621 1096.550 30287.808

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

21 15.52 including stacking of useful materials near the site and disposal of Each 5.000 112.05 560.250

unserviceable materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

23 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single

15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 3.000 6258.75 18776.250

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

joints, melting of lead and making into blocks including stacking of pipes

& lead at site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within

a lead of 50 metres

29 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 45.000 1180.75 53133.750

17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 20.000 1186.00 23720.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

31 17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Providing and fixing trap of self cleansing design with screwed down or hinged

32 17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 5.000 1975.15 9875.750

33 17.57 Providing and fixing collar :

17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 15.000 513.15 7697.250

17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 10.000 362.05 3620.500

34 17.39 Providing and fixing plain bend of required degree.

17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 470.45 7056.750

17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 390.50 3905.000

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 705.20 10578.000

17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 522.80 5228.000

Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 15.000 726.55 10898.250

17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 10.000 629.50 6295.000

37 17.56 Providing and fixing terminal guard :

17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 15.000 506.00 7590.000

17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 10.000 404.75 4047.500

38 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 10.000 53.25 532.500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Mtr 25.000 497.80 12445.000

18.8.2 20 mm nominal dia Pipes Mtr 35.000 537.60 18816.000

18.8.3 25 mm nominal dia Pipes Mtr 35.000 627.25 21953.750

18.8.4 32 mm nominal dia Pipes Mtr 40.000 739.30 29572.000

40 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

41 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or as

47 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 1000.000 11.00 11000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

48 18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

49 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

18.75.3 25mm nominal bore, weighing not less than 62 gms Each 2.000 113.35 226.700

Total of sub-head (Water Supply Installations ) 3,54,554.30 -

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

55 19.24 including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-charge:

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 2.000 2540.85 5081.700

Raising manhole cover and frame slab to required level including dismantling

56 19.26 existing slab and making good the damage as required (Raising depth of

manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

58 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 5.000 416.80 2084.000

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe

etc. and repairing the hole after insertion of drain pipe etc. with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), including finishing complete so as to make it leak proof.

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine

sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering

with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.000 1992.60 9963.000

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

61 18.33 stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat cement complete as

per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 2.000 10862.40 21724.800

Total of sub-head (EXTERNAL SEWERAGE SYSTEM ) 73,359.75

Repairs to Toilets Works Total : 10,24,056.00 -

Say (In Lakhs): 10.24 -

E. Repairs to Door/Windows

Dismantling doors, windows and clerestory windows (steel or wood) shutter

76 15.12 including chowkhats, architrave, holdfasts etc. complete and stacking within

50 metres lead :

15.12.1 Of area 3 sq. metres and below Nos 14.000 367.20 5140.800

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid plain flush door shutter of required size comprising of virgin

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum

toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and

screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum

77 26.87 compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and

resistance to spread of flame of Class A category with property of being

termite/borer proof, water/moisture proof and fire retardant and fixing with

stainless steel butt hinges of required size with necessary full body threaded

star headed counter sunk S.S screws, all as per direction of Engineer-In

Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be

paid separately)

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge

of average width of aperture 1.4 mm in both directions with wire of dia 0.63

mm, for doors, windows and clerestory windows with hinges and necessary

9.27.2 30 mm thick shutters

9.27.2.2 With ISI marked stainless steel butt hinges of required size

9.27.2.2.2 Kiln seasoned and chemically treated hollock wood Sqm 0.000 3447.800 0.000

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and

screws etc. complete : (Copper oxidized as per IS 1378).

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel

type) with necessary screws etc. complete : (Copper oxidized as per IS : 1378).

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating

81 9.100 not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised

82 9.101 (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed

to required colour and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Nos 0.000 72.350 0.000

Providing and fixing wooden moulded beading to door and window frames with

iron screws, plugs and priming coat on unexposed surface etc. complete :

9.40.2 Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with

necessary screws etc. complete. (Copper oxidized as per IS 1378).

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including

hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle

of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or

rigidly fixed together by mechanical means, including M.S. pressed butt hinges

2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as

specified and applying a coat of approved steel primer after pre-treatment of

the surface as directed by Engineer-in-charge:

Providing and fixing factory made ISI marked steel glazed doors, windows and

ventilators, side /top /centre hung, with beading and all members such as

F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints

86 10.11 mitred and flash butt welded and sash bars tenoned and riveted, including

providing and fixing of hinges, pivots, including priming coat of approved steel

primer, but excluding the cost of other fittings, complete all as per approved

design, (sectional weight of only steel members shall be measured for payment).

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

10.11.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate Kg 0.000 131.050 0.000

20 mm nominal size) @22 Kg/Sqm

Providing and fixing M.S. grills of required pattern in frames of windows etc.

87 9.48 with M.S. flats, square or round bars etc. including priming coat with approved

steel primer all complete.

9.48.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg 0.000 238.350 0.000

Providing and fixing T-iron frames for doors, windows and ventilators of mild

88 10.13 steel Tee-sections, joints mitred and welded, including fixing of necessary butt

hinges and screws and applying a priming coat of approved steel primer.

Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block

10.13.1 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate Kg 0.000 141.700 0.000

20 mm nominal size).

Providing and fixing oxidised M.S. casement stays (straight peg type) with

necessary screws etc. complete. (Copper oxidized as per IS : 1378).

9.68.1 300 mm weighing not less than 330 grams Nos 20.000 67.400 1348.000

9.68.2 250 mm weighing not less than 280 grams Nos 30.000 61.050 1831.500

Providing & fixing glass panes with putty and glazing clips in steel doors,

windows, clerestory windows, all complete with :

10.30.1 4.0 mm thick glass panes (weight not less than 10 kg/ sqm) Sqm 0.000 1390.150 0.000

91 14.9 Renewal of old putty of glass panes Mtr 56.150 0.000

92 13.50 Applying priming coat:

With ready mixed aluminum primer of approved brand and manufacture on resinous

wood and plywood

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture

Providing and fixing bright finished brass single acting spring hinges with

necessary brass screws etc. complete :

Providing and fixing PVC rigid foam sheet 1 mm thick on existing door shutters

(bathroom and W.C. doors) using synthetic rubber based adhesive.

Providing and fixing fly proof galvanized M.S. wire gauge to windows

and clerestory windows using wire gauge with average width of aperture 1.4 mm in both

directions with wire of dia 0.63 mm all complete.

69.1 9,51,1 With 2nd class teak wood beading 62X19 mm Sqm 1308.35 0.000

Repairs to Door/Windows Works Total : 2,84,239.55 -

Say (In Lakhs): 2.84

Grand Total 14,44,833.13 -

Grand Total 14,44,833.13 -

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF BOYS DORMITORY FOR 320 nos OF STUDENTS - JNV, BALESORE, ODISHA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

A. Structural Repair & Retrofitting

Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including tapering of all edges,

1 26.28 making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and

disposal of debris for all lead and lifts all complete as per direction of

Engineer-In-Charge

A. 26.28.2 50mm average thickness Sqm 87.760 256.350 22497.276

B. 26.28.3 25 mm avarage thickness Sqm 105.120 126.750 13323.960

Cleaning of reinforcement from rust from the reinforcing bars to give

it a total rust free steel surface by using alkaline chemical rust

remover of approved make with paint brush and removing loose

particles after 24 hours of its application with wire brush and thoroughly

washing with water and allowing it to dry, all complete as per direction

of Engineer-In-Charge.

26.29.1 Bars upto 12 mm diameter Mtr 3086.08 8.250 25460.160

Cleaning of exposed concrete surface of sticking material including

loose and foreign material by sand blasting with coarse sand followed

by and including cleaning with oil free air blast as per direction of

Engineer in charge.

Shotcreting R.C.C. columns, beams and slabs etc. in layers with

approved design mix concrete having the specified minimum

characteristic compressive strength [with ordinary portland cement,

coarse sand and graded stone aggregate of 10 mm maximum size

in proportion as per design criteria] including the cost of centering

and shuttering at edges and corners etc. as directed by Engineer in-Charg

Note: Rates shall include the providing necessary ground wires etc.

The levelling gauges, if used, shall be paid for separately. Payment

under this item shall be made only after proper wet curing has been

done and surface has been satisfactorily evaluated by sounding/

tapping with a blunt metal instrument.

25mm thick in Grade M 25 with cement content not

less than 330 kg per cum

50mm thick in Grade M 25 with cement content not

less than 330 kg per cum

Providing and inserting 12mm dia galvanised steel injection nipple in

honey comb area and along crack line including drilling of holes of

required diametre (20mm to 30mm) up to depth from 30mm to 80mm

5 26.39 at required spacing and making the hole & crack dust free by blowing Nos 160.00 4079.290 652686.400

compressed air, sealing the distance between injection nipple with

adhesive chemical of approved make and allow it to cure complete

as per direction of Engineer-In-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm

mesh or other suitable size wire mesh to be fixed & firmly anchored

6 26.40 to the concrete surface by means of "L" shaped mild steel shear key Sqm 157.240 902.550 141916.962

welded with existing reinforcement including the cost of materials,

labour, tool & plants as approved by Engineer-in-charge.

Repair to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd

(Dr. Fixit Make) , including cutting the area of plaster in proper shape, raking out joints

7 and preparing and plastering the durface of the walls complete, including disposal of Sqm 419.956 657.400 276079.074

rubbish to the dumping ground, all complete as per direction of Engineer- in-Charge.

With cement mortar 1:4 (1cement: 4coarse sand)

Providing and applying white cement based putty of average thickness

8 13.80 1 mm, of approved brand and manufacturer, over the plastered wall Sqm 419.956 156.050 65534.134

surface to prepare the surface even and smooth complete.

Structural Repair & Retrofitting Works Total : 15,06,617.68 -

Say (In Lakhs): 15.07 -

B. Repairs to Roof

Demolishing mud phaska in terracing and disposal of material within

50 metres lead.

Painting (one or more coats) on rain water, soil waste and vent pipes and

10 13.96 fittings with synthetic enamel paint of approved brand and manufacture and

required colour on old work :

13.96.2 100 mm diameter pipes Mtr 87.60 36.250 3175.500

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen primer

for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

11 14.91 joints etc, and preparing the surface complete. The vital physical and chemical Sqm 396.59 730.550 289728.825

parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal

and transverse direction as 300/250N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

Extra for covering top of membrane with Geotextile 120 gsmnon woven 100% polyster

12 14.92 of thickness 1 to 1.25MM bnded to membrane with intermittent touch by heating the Sqm 0.00 88.90 0.000

membrane by Butane Torch as per manufacturer recommendation

Repair to Roof Works Total : 3,91,593.87 -

Say (In Lakhs): 3.92

C. Repairs to Toilets

Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 4.388 10852.950 47617.318

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

13 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer - Cum 0.672 3551.250 2386.440

Demolishing brick work manually/ by mechanical means including stacking of serviceable

14 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m

(stacks of cleaned bricks shall be measured):

15.8.3 From brick work in cement mortar Nos 3.892 6700.800 26076.833

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 1255.23 73.400 92133.809

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded

stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.16 Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 6.720 332.400 2233.728

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 52.752 107.850 5689.303

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5.962 9105.950 54286.032

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 20.160 1186.000 23909.760

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

of half brick masonry.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer

26 8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 1040.31 1267.950 1319061.065

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

27 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 215.109 1096.550 235877.774

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

28 15.52 including stacking of useful materials near the site and disposal of Each 10.000 112.05 1120.500

unserviceable materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

30 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single

15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

32 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 2.000 1607.95 3215.900

cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 5.000 6258.75 31293.750

Providing and fixing PTMT towel rail complete with brackets fixed to wooden

34 17.73 cleats with CP brass screws with concealed fittings arrangement of approved

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective

height of 88 mm, weighing not less than 190 gms.

Repair to Toilets Total : 19,73,769.19 -

Say (In Lakhs): 19.74

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

joints, melting of lead and making into blocks including stacking of pipes

& lead at site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within

a lead of 50 metres

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

38 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 65.000 1180.75 76748.750

17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 85.000 1186.00 100810.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

40 17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Providing and fixing trap of self cleansing design with screwed down or hinged

41 17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 5.000 1975.15 9875.750

42 17.57 Providing and fixing collar :

17.57.1.2 100 mm Sand cast iron S&S as per IS - 3989 Each 38.000 513.15 19499.700

17.57.2.2 75 mm Sand cast iron S&S as per IS - 3989 Each 48.000 362.05 17378.400

43 17.39 Providing and fixing plain bend of required degree.

17.39.1.1 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 470.45 17877.100

17.39.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 390.50 18744.000

Providing and fixing bend of required degree with access door, insertion rubber

washer 3 mm thick, bolts and nuts complete.

17.38.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 705.20 26797.600

17.38.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 522.80 25094.400

Providing and fixing single equal plain junction of required degree with access

door, insertion rubber washer 3 mm thick, bolts and nuts complete.

17.43.1.1 100x100x100 mm Sand cast iron S&S as per IS - 1729 Each 38.000 726.55 27608.900

17.43.2.1 75x75x75 mm Sand cast iron S&S as per IS - 1729 Each 48.000 629.50 30216.000

46 17.56 Providing and fixing terminal guard :

17.56.1.2 100 mm dia Sand cast iron S&S as per IS - 1729 Each 38.000 506.00 19228.000

17.56.2.2 75 mm dia Sand cast iron S&S as per IS - 3989 Each 48.000 404.75 19428.000

47 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. Each 10.000 53.25 532.500

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having

thermal stability for hot & cold water supply, including all CPVC plain & brass

threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete

as per direction of Engineer in Charge.

Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Mtr 185.000 497.80 92093.000

18.8.2 20 mm nominal dia Pipes Mtr 150.000 537.60 80640.000

18.8.3 25 mm nominal dia Pipes Mtr 105.000 627.25 65861.250

18.8.4 32 mm nominal dia Pipes Mtr 120.000 739.30 88716.000

49 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

50 18.21 Providing and fixing uplasticised PVC connection pipe with brass unions :

Providing and fixing C.P. brass bib cock of approved quality conforming to

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points

of approved quality conforming to IS:8931

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality

(screwed end) :

Providing and fixing rectangular high density polyethylene water storage

loft tank with cover, conforming to ISI : 12701, colour of opaque white or as

56 18.48 A approved by Engineer-in-charge. The rate includes making necessary holes Ltr 8000.000 11.00 88000.000

for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for

tank shall be paid separately

57 18.16 Providing and fixing brass stop cock of approved quality :

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes

58 12.41 conforming to IS : 13592 Type A, including jointing with seal ring conforming to

IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/

accessories for unplasticised Rigid PVC rain water pipes conforming to IS :

13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving

10 mm gap for thermal expansion.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PTMT extension nipple for water tank pipe, fittings of

approved quality and colour.

18.75.3 25mm nominal bore, weighing not less than 62 gms Each 2.000 113.35 226.700

Total of sub-head (Water Supply Installations ) 10,86,908.40

EXTERNAL SEWERAGE SYSTEM

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various

sizes including demolishing of R.C.C. work manually/ by mechanical means

and stacking of useful materials near the site and disposal of unserviceable

materials within 50 metres lead as per direction of Engineer-in-charge.

Dismantling of road gully chamber of various sizes including C.I. grating

with frame including stacking of useful materials near the site and disposal

of unserviceable materials within 50 metres lead including refilling the

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame,

64 19.24 including stacking of useful materials near the site and disposal of

unserviceable materials within 50 m lead as per direction of Engineer-in-charge:

19.24.1 Rectangular manhole 90x80 cm and 45 cm deep Each 2.000 2540.85 5081.700

Raising manhole cover and frame slab to required level including dismantling

65 19.26 existing slab and making good the damage as required (Raising depth of

manhole to be paid separately) :

Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade

Making chases up to 7.5x7.5 cm in walls including making good and finishing

with matching surface after housing G.I. pipe etc.

67 18.76 Cutting holes up to 30x30 cm in walls including making good the same:

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 6.000 416.80 2500.800

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe

etc. and repairing the hole after insertion of drain pipe etc. with cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), including finishing complete so as to make it leak proof.

Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement

mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box

100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4

mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal

size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine

sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering

with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a

floating coat of neat cement complete as per standard design :

18.32.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 5.000 1992.60 9963.000

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement

mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box

100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with

chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded

70 18.33 stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation

concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm

nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse

sand) 12 mm thick, finished with a floating coat of neat cement complete as

per standard design :

18.33.1 With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 Each 1.000 10862.40 10862.400

Repairs to External sewerage system Total : 55,061.65 -

Say (In Lakhs): 0.55 -

Grand Total 50,13,950.79 -

Grand Total 50,13,950.79 -

Digitally signed by JAYA

COST ABSTRACT :- REPAIR WORK OF GIRLS DORMITORY FOR 240 nos OF STUDENTS - JNV, BALESORE, ODISHA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

A. Structural Repair & Retrofitting

Chipping of unsound/weak concrete material from slabs, beams,

columns etc. with manual Chisel and/ or by standard power driven

percussion type or of approved make including tapering of all edges,

1 26.28 making square shoulders of cavities including cleaning the exposed

concrete surface and reinforcement with wire brushes etc. and

disposal of debris for all lead and lifts all complete as per direction of

Engineer-In-Charge

A. 26.28.2 50mm average thickness Sqm 65.820 256.350 16872.957

B. 26.28.3 25 mm avarage thickness Sqm 78.840 126.750 9992.970

Cleaning of reinforcement from rust from the reinforcing bars to give

it a total rust free steel surface by using alkaline chemical rust

remover of approved make with paint brush and removing loose

particles after 24 hours of its application with wire brush and thoroughly

washing with water and allowing it to dry, all complete as per direction

of Engineer-In-Charge.

26.29.1 Bars upto 12 mm diameter Mtr 2314.56 8.250 19095.120

Cleaning of exposed concrete surface of sticking material including

loose and foreign material by sand blasting with coarse sand followed

by and including cleaning with oil free air blast as per direction of

Engineer in charge.

Shotcreting R.C.C. columns, beams and slabs etc. in layers with

approved design mix concrete having the specified minimum

characteristic compressive strength [with ordinary portland cement,

coarse sand and graded stone aggregate of 10 mm maximum size

in proportion as per design criteria] including the cost of centering

and shuttering at edges and corners etc. as directed by Engineer in-Charg

Note: Rates shall include the providing necessary ground wires etc.

The levelling gauges, if used, shall be paid for separately. Payment

under this item shall be made only after proper wet curing has been

done and surface has been satisfactorily evaluated by sounding/

tapping with a blunt metal instrument.

25mm thick in Grade M 25 with cement content not

less than 330 kg per cum

50mm thick in Grade M 25 with cement content not

less than 330 kg per cum

Providing and inserting 12mm dia galvanised steel injection nipple in

honey comb area and along crack line including drilling of holes of

required diametre (20mm to 30mm) up to depth from 30mm to 80mm

5 26.39 at required spacing and making the hole & crack dust free by blowing Nos 120.00 4079.290 489514.800

compressed air, sealing the distance between injection nipple with

adhesive chemical of approved make and allow it to cure complete

as per direction of Engineer-In-Charge.

Providing and fixing hard drawn steel wire fabric of size 75 x25 mm

mesh or other suitable size wire mesh to be fixed & firmly anchored

6 26.40 to the concrete surface by means of "L" shaped mild steel shear key Sqm 117.930 902.550 106437.722

welded with existing reinforcement including the cost of materials,

labour, tool & plants as approved by Engineer-in-charge.

Repair to plaster of thickness 12 mm to 20 mm in patches with epoxy based dampgaurd

(Dr. Fixit Make) , including cutting the area of plaster in proper shape, raking out joints

7 and preparing and plastering the durface of the walls complete, including disposal of Sqm 314.967 657.400 207059.306

rubbish to the dumping ground, all complete as per direction of Engineer- in-Charge.

With cement mortar 1:4 (1cement: 4coarse sand)

Providing and applying white cement based putty of average thickness

8 13.80 1 mm, of approved brand and manufacturer, over the plastered wall Sqm 314.967 156.050 49150.600

surface to prepare the surface even and smooth complete.

Structural Repair & Retrofitting Works Total : 11,09,259.19 -

Say (In Lakhs): 11.09 -

B. Repairs to Roof

Demolishing mud phaska in terracing and disposal of material within

50 metres lead.

Painting (one or more coats) on rain water, soil waste and vent pipes and

10 13.96 fittings with synthetic enamel paint of approved brand and manufacture and

required colour on old work :

13.96.2 100 mm diameter pipes Mtr 87.60 36.250 3175.500

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and laying APP (Atactic Polypropylene Polymer) modified

prefabricated five layer 3 mm thick water proofing membrane, black finished

reinforced with non-woven polyester matt consisting of a coat of bitumen primer

for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of

density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer

coat the layer of membrane shall be laid using Butane Torch and sealing all

11 14.91 joints etc, and preparing the surface complete. The vital physical and chemical Sqm 674.64 730.550 492858.252

parameters of the membrane shall be as under : Joint strength in longitudinal

and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal

and transverse direction as 300/250N. Softening point of membrane not less

than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with

ASTM, D - 5147. The laying of membrane shall be got done through the authorised

applicator of the manufacturer of membrane :

Repair to Roof Works Total : 5,70,055.48 -

Say (In Lakhs): 5.70 -

C. Repairs to Toilets

Demolishing cement concrete manually/ by mechanical means including disposal of

material within 50 metres lead as per direction of Engineer - in charge.

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) Cum 4.388 10852.950 47617.318

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars

13 15.3 and disposal of unserviceable material within 50 metres lead as per direction of Engineer - Cum 0.672 3551.250 2386.440

Demolishing brick work manually/ by mechanical means including stacking of serviceable

14 15.7 material and disposal of unserviceable material within 50 metres lead as per direction of

Engineer-in-charge.

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m

(stacks of cleaned bricks shall be measured):

15.8.3 From brick work in cement mortar Nos 3.892 6700.800 26076.833

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste

materials by mechanical means, including loading, transporting, unloading to approved

municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial

lead, for all leads including all lifts involved.

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 627.61 73.400 46066.904

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone

aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of

centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone

aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters,

buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and

struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering,

finishing and reinforcement :

1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded

stone aggregate 20 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for all

5.9.16 Edges of slabs and breaks in floors and walls

Centering and shuttering including strutting, propping etc. and removal of form

for all heights:

5.9.3 Suspended floors, roofs, landings, balconies and access platform Sqm 6.720 332.400 2233.728

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in

position and binding all complete upto plinth level.

5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 52.595 107.850 5672.371

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

superstructure above plinth level up to floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 5.962 9105.950 54286.032

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 20.160 1186.000 23909.760

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course

of half brick masonry.

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer

27 8.31 in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement Sqm 520.16 1267.950 659530.532

mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @

3.3kg per sqm, including pointing in white cement mixed with pigment of matching

shade complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm

(thickness to be specified by the manufacturer) of 1st quality conforming

to IS : 15622 of approved make in colours such as White, Ivory, Grey,

28 11.37 Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : sqm 107.460 1096.550 117834.715

4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including

pointing the joints with white cement and matching pigment etc.,

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China)

29 15.52 including stacking of useful materials near the site and disposal of Each 10.000 112.05 1120.500

unserviceable materials within 50 metres lead.

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral

type foot rests

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

31 17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single

15 mm C.P. brass pillar tap

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C.

waste fittings complete.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of

33 17.31 approved quality) complete with 6 mm thick hard board ground fixed to wooden Each 8.000 1607.95 12863.600

cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back or wall corner type lipped

front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively

with automatic flushing cistern with standard flush pipe and C.P. brass

spreaders with brass unions and G.I clamps complete, including painting of

fittings and brackets, cutting and making good the walls and floors wherever

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern Each 6.000 6258.75 37552.500

Providing and fixing PTMT towel rail complete with brackets fixed to wooden

35 17.73 cleats with CP brass screws with concealed fittings arrangement of approved

quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective

height of 88 mm, weighing not less than 190 gms.

Water Supply Installations

Dismantling G.I. pipes (external work) including excavation and refilling

trenches after taking out the pipes, manually/ by mechanical means

including stacking of pipes within 50 metres lead as per direction of

Engineer-in-charge :

Dismantling C.I. pipes including excavation and refilling trenches after

taking out the pipes, manually/ by mechanical means breaking lead caulked

joints, melting of lead and making into blocks including stacking of pipes

& lead at site within 50 metre lead as per direction of Engineer-in-charge:

Dismantling of C.I. sluice valve including stacking of useful materials within

a lead of 50 metres

39 17.35 Providing and fixing soil, waste and vent pipes :

17.35.1.2 100mm Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 Mtr 65.000 1180.75 76748.750

17.35.2.2 75mm Centrifugally cast (spun) iron socketed pipe as per IS: 3989 Mtr 85.000 1186.00 100810.000

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes

and fittings of diameter :

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast

iron/cast iron (spun) pipe embedded in and including cement concrete blocks

41 17.37 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate

20 mm nominal size), including cost of cutting holes and making good the

Digitally signed by JAYA

Amount on DSR - Amount on Non

Sl No DSR 2023 Item Description Units Total Qty Rate (In Rs)

2023 (In Rs) DSR (In Rs)

Providing and fixing trap of self cleansing design with screwed down or hinged

42 17.60 grating with or without vent arm complete, including cost of cutting and making

good the walls and floors :

17.60.2.1 100mm inlet & 75mm outlet Sand cast iron S&S as per IS - 3989 Each 5.000 1975.15 9875.750