Karnataka

Active

Works

Other Works

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

Directorate Of Municipal Administration

DMA City Corporation Hubballi-Dharawada | Dharwad, Karnataka

Amount: ₹19.4 LCloses: 24 Sept 2026Due tomorrow

Timeline

Published17 Sept 2026
Closes24 Sept 2026

Tender Value

₹19.4 L

EMD Value

₹41,163

Closing Date

24 Sept 2026, 4:00 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

Riyaz Ahmad I Hubballi

Office Number

Mobile Number

Work Description

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

Tender Information

Tender ID

DMA/2026-27/OW/WORK_INDENT62528

Reference Number

DMA/2026-27/OW/WORK_INDENT62528

Tender Type

Open

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

DMA City Corporation Hubballi-Dharawada

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredTwo Financial Turnover Certificate From 2021-22 to 2025-26 as per kw-1 With UDIN Number with Profit and Loss statement

RequiredValid Contractor License Certificate issued by competent authority

RequiredWorkdone certificate-50 percent of Similar nature of work done certificate of amount put to tender as per kw-1 From 2021-22 to 2025-26

RequiredLine of Credit 30 percent of amount put to tender as per kw-1

RequiredGST Certificate

RequiredPan Card

RequiredAgreed to Terms and conditions as per kw-1

RequiredContact number and Address proof of a Contractor or Contact person

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government/Government of India/Union Territory

Bidders shall ensure upload of relevant document certifying his-her status as Scheduled Caste-Scheduled Tribe/other reserved category as prescribed in the tender document

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than One times the annual payments from this contract as per KW-1

Satisfactorily completed (at least 50% of the contract value), as prime contractor, at least one similar work is to be completed of value not less than Rs. 8.23 lakhs -Usually not less than 50% estimated value of contract

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

The Payment for the work will be made based on availability of funds and according to Queue system

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected

Royalty on construction materials and other taxes will be deducted as per prevailing Govt, orders as may be modified from time to time

As per Karnataka state Government order No.LD/300/LET/2006 Banglore Dated 01-01-2007 and Government Letter No PW/134/BMS/2007 Dated 27-7-2007, a sum amounting to 1% of the bill amount will be deducted towards construction Labour welfare fund

The tenderer shall scan original Workdone certificates/Turnover Statements and any other documents specified by the employer and attach the scanned file to the Bid. The Original Documents shall be produced for physical verification within one week from the date of Technical bid opening

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

The earnest money deposit will be forfeited if the documents submitted by the tenderer found to be misleading/forged or fake/Taken back

The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered institution or firms with consultants with the Third Party

The Department is not responsible for any delay caused in accessing the e-procurement portal

Tender validity for valid bid is 90 days

The Tenders/ Bids are invited as per Standard tender Bid Document KW-1: The contractor shall attach all the requisite documents as required in the standard bid document. The Bidders shall abide as per the detailed instructions and conditions contained in standard bid document KW-1

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹41,163

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Download Ends

21 Sept 2026

BOQ Preview

•

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size...

•

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3)

•

Floor painting with floor enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remov...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Single Pole Setup Cycle

•

Providing, Supplying, fixing, installation, commissioning and trial run of Single pole set up Cycle Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,j...

•

Seated Chest Press

•

Providing, Supplying, fixing, installation, commissioning and trial run of Seated chest Press. . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Cross Walker. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welde...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Thi chi Wheel . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic we...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Leg Press. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welded.All...

•

Leg & Thigh Excercise/Air Walker

•

Providing, Supplying, fixing, installation, commissioning and trial run of Air Walker . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joint...

•

AB Trainer/sit-up Bench

•

Providing, Supplying, fixing, installation, commissioning and trial run of Air Walker . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are rob...

•

Providing and fixing seating bench 1 no base slab, 1no back rest, 2no legs, made up of granite stone with nice finish chamfered edge and fillet corner finishes is conveyed to work site it is inclusive...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

62528 kw-1 doc.doc

Tender Document • 4.70 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Karnataka

Active

Works

Other Works

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

Directorate Of Municipal Administration

DMA City Corporation Hubballi-Dharawada | Dharwad, Karnataka

Amount: ₹19.4 LCloses: 24 Sept 2026Due tomorrow

Timeline

Published17 Sept 2026
Closes24 Sept 2026

Tender Value

₹19.4 L

EMD Value

₹41,163

Closing Date

24 Sept 2026, 4:00 pmDue tomorrow

Tender Inviting Authority

Office Inviting Bids

Directorate of Municipal Administration

Contact Person

Riyaz Ahmad I Hubballi

Office Number

Mobile Number

Work Description

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

Tender Information

Tender ID

DMA/2026-27/OW/WORK_INDENT62528

Reference Number

DMA/2026-27/OW/WORK_INDENT62528

Tender Type

Open

Product Category

Other Works

Form of Contract

Electronic Documents, First(One Cover)

Location

DMA City Corporation Hubballi-Dharawada

Source Website

Subscribe to view

Documents Required

8 documents required · 8 mandatory

Technical Bid

RequiredTwo Financial Turnover Certificate From 2021-22 to 2025-26 as per kw-1 With UDIN Number with Profit and Loss statement

RequiredValid Contractor License Certificate issued by competent authority

RequiredWorkdone certificate-50 percent of Similar nature of work done certificate of amount put to tender as per kw-1 From 2021-22 to 2025-26

RequiredLine of Credit 30 percent of amount put to tender as per kw-1

RequiredGST Certificate

RequiredPan Card

RequiredAgreed to Terms and conditions as per kw-1

RequiredContact number and Address proof of a Contractor or Contact person

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government/Government of India/Union Territory

Bidders shall ensure upload of relevant document certifying his-her status as Scheduled Caste-Scheduled Tribe/other reserved category as prescribed in the tender document

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than One times the annual payments from this contract as per KW-1

The Payment for the work will be made based on availability of funds and according to Queue system

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder

Conditional tenders will not be accepted

Any discrepancies observed in the documents uploaded by the tenderer the submitted tender bid shall be liable to be rejected

Royalty on construction materials and other taxes will be deducted as per prevailing Govt, orders as may be modified from time to time

The Employer reserves the right to reject any or all Tenders without assigning any reason or what so ever

The earnest money deposit will be forfeited if the documents submitted by the tenderer found to be misleading/forged or fake/Taken back

The contractors shall collect necessary samples as required & all relevant requisite tests to be got done by the registered institution or firms with consultants with the Third Party

The Department is not responsible for any delay caused in accessing the e-procurement portal

Tender validity for valid bid is 90 days

Work Locations

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹41,163

Important Dates

Last Activity

17 Sept 2026

Published

17 Sept 2026

Download Ends

21 Sept 2026

BOQ Preview

•

Installation of open gym equipments at Vasa layout garden in ward no 19 of Dharwad.

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Tra...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Loading and Unloading of Stone Boulder/Stone aggregates/Sand/ Kankar/Moorum. (Tipper 5.5 m3)

•

Floor painting with floor enamel paint of approved brand and manu- facture of required colour to give an even shade :Two coats on new work after thoroughly brooming the surface to remov...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Single Pole Setup Cycle

•

Providing, Supplying, fixing, installation, commissioning and trial run of Single pole set up Cycle Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,j...

•

Seated Chest Press

•

Providing, Supplying, fixing, installation, commissioning and trial run of Seated chest Press. . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Cross Walker. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welde...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Thi chi Wheel . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic we...

•

Providing, Supplying, fixing, installation, commissioning and trial run of Leg Press. Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are robotic welded.All...

•

Leg & Thigh Excercise/Air Walker

•

Providing, Supplying, fixing, installation, commissioning and trial run of Air Walker . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joint...

•

AB Trainer/sit-up Bench

•

Providing, Supplying, fixing, installation, commissioning and trial run of Air Walker . Metal:All tubular steel of 2.5mm thickness are galvanized and zinc dipped,joints are rob...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

62528 kw-1 doc.doc

Tender Document • 4.70 MB

Ready to Participate?

Download all tender documents and submit your bid