PROVN OF RECREATION ROOMS, TOILET BLOCKS AND PATHWAY UNDER GE SAUGOR

Amount

Excavating over areas not exc 1.5m deep & getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m deep in soft/loose soil and getting out complete all as specified and directed.

M&L for approved earth filling with approved soil brought from out side MD land, filling in trenches or paving laid in layers not exceeding 25 cm thick spread levelled and rammed including watering complete all as specified and directed.

Removing excavated materials (soil) to a distance not exc. 150 m and deposting where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed..

M&L for damp proof course to horizontal or vertical surfaces in cement concrete 1:2:4, type B-0 (using 12.5mm graded stone aggregates), 40 mm thick mixed with WPC including necessary formwork complete all as specified and directed. Note:-WPC shall be measured and paid separately

M&L for hardcore of broken stone/boulders of gauge not exc. 63mm, deposited, spread & levelled in layers not exc. 15 cm thick, watered & rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC type C-2, (1:3:6) using 20mm graded stone aggregate as in plinth protection surface finished even and smooth without using extra cement complete all as specified and directed..

M&L for PCC 1:4:8, type D2 (using 40 mm graded stone aggregate), 100mm thick, as in sub base complete all as specified and directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20 mm graded mechanically crushed stone aggregates) for foundation including rafts, footings, foundation beams, plinth beams and bases for columns complete all as specified and as directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregates) as in columns, pillars, piers, post and struts complete all as specified and directed.

M&L for providing reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) as in beams/ lintels over 1.5m span complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for reinforced cement concrete (design mix) M-25 (using 20mm graded mechanically crushed stone aggregate) as in chajjas complete all as specified and directed..

M&L for mild steel "TMT" bars 10mm dia and over in reinforcement, cut to length, bent to shape required including crnaking, bending sprially for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed...

M&L for mild steel TMT bars 6mm to 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified and directed..

All as per Srl item 16 above but for 5mm dia and over upto 10 mm dia and including 10mm dia in stirrups, spacers and binders -ditto-

M&L for form work to sides & soffits of plinth beam and sides of footings getting rough finished surfaces of concrete complete all as specified and directed...

M&L for form work to sides of columns getting rough finished surfaces of concrete complete all as specified and directed...

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. fair finished surfaces of concrete flat complete all as specified and directed..

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200m thick (Horizontal or sloping) Fair finished surfaces of concrete flat complete all as specified and directed..

M&L for formwork to chullah hoods, chajjas, troughs & similar items including edges fair finished surfaces of concrete flat complete all as specified and directed...

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed..

M&L for brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed...

M&L for rendering 15mm thick on fair face of brickwork in CM (1:6) finished even& smooth without using extra cement complete all as specified and directed..

M&L for rendering 5mm thick on fair faces of concrete surfaces in CM (1:3) in ceiling complete all as specified and directed...

M&L for rendering 10mm thick on fair faces of roof concrete surfaces in CM (1:4) finished even & smooth with water proofing compound complete all as specified and directed.. Note:-WPC shall be measured and paid separetly under respective item.

M&L for two coat cement plaster ,first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement complete all as specified and directed.. Note:-WPC shall be paid seperately under respective item

Supplying only integral water proofing compound complete all as specified and directed..

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new wall surfaces etc complete all as specified and directed . Make:- Asian ACE or equivalent make as approved by GE

M&F for 8mm to 10mm thick coloured vitrified tiles area of each tiles not exceeding 0.36 sqm in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the tiles laid over and including 15 mm thick screed bed in CM 1:4 all as specified and directed.

All as per Srl item No. 32 above but in dado / skirting etc. over and including 10mm thick rendering in CM (1:4) complete all as specified and directed.

S&F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS complete all as specified and directed

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34X39mm,sideand top of size min 92.34X29.70mm, shutters vertical 39X20mm,shutter top &bottom of size min 20X39mm ,shutter interlock min size 39X20mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm }

M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed

M &L for applying three coats of white wash on new ceiling surface including preparation of surface complete all as specified and directed

M&L for applying two coats of acrylic distemper, white or tinted over a coat of wall primer and applying Birla / J. K. wall care white putty 1mm thick for levelling the surfaces on new wall surface including preparation of surface complete all as specified and directed.

M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed:-

(a) The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (b) Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (c) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (d) Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (e) Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (f) Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed

M&L for moorum/red bajri filling in floors or pavings, laid in layers not exc. 15cm thick spread, levelled & rammed including watering complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with adhesive joints laid in trenches or in floors complete all as specified and directed.

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment etc over and incl 40mm thick uniformly levelled surface of stone dust cushioning complete all as specified and directed

M&L for PCC 1:3:6, type C1 (using 20mm graded stone aggregates) as in coping as required with and incl all necessary form work complete all as specified and directed

M&L for plain cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregates) as in sub base complete all as specified and directed

M&L for 25 mm thick PCC (1:2:4), type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or Kota stone complete all as specified.

M&L for applying three coats of white wash on new wall surface including preparation of surface complete all as specified and directed.

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm and not exc. 0.18 sqm (400mm x 400mm joint free (rectified) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for glazed ceramic tiles of size 600mmx300mmx7mm thick (joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15mm thick rendering in CM 1:4 complete all as specified and directed

S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 15mm bore complete all as specified and directed.

S&F GI tubing `medium grade' with all fitting & fixed complete to walls & ceilings or laid in floors of 20mm bore complete all as specified and directed

S&F CP bib taps 15 mm bore, cast copper alloy ancy type with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule fancy type complete all as specified and directed.

S&F 15mm bore stop cock CP fancy type with butter fly handle, screwed down, high pressure for iron pipes or for unions (weight not less than 400gms) complete all as specified and directed

S&F stop valves/angle valve 15mm bore fancy type, CP with long shank & cup (conncelaed type), cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

S&F ball PVC valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F CP pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position three layered wall construction 500 Ltrs capacity complete all as specified and directed

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F PVC (SWR) pipes 110mm bore single socketed in any length with adhesive joints fixed to walls with mild steel clamps of suitable size complete all as specified and directed.

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F PVC bends any radius 110mm dia provided with axcess door complete all as specified and directed

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.

M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement complete all as specified and directed

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed

S&F CP fancy type Tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 125mm size brass chormium plated shower rose with long body including fixing to steel pipe or union complete all as specified and directed

S&F vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed

S&F vitreous China wash basin, white, flat back, size 550mmx400mm including 32 mm brass waste coupling,waste pipe and brackets complete all as specified and directed

S&F vitreous China squatting pan, 'Orissa' pattern, size 580mm X 440mm white, with integral foot rests incl flush pipe, provn of lime concrete bedding complete all as specified and directed

S&F PVC valveless, syphonic action type, flushing cistern (dual 5/10ltr capacity), low level, white, with intel, ball valve, float , handle and flush pipe 32mm bore,and brackets complete all as specified and directed

M&L for cutting chases, pinning in, in brick/ stone wall making good to facings where required and pointing in cement mortar 1:3 or P. C. C 1:2:4 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring insert sheet in wall. etc. and making good, cutting not exceeding 10cm girth complete all as specified and directed.

S&F factory made Solid PVC prelam Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet single side prelam PVC sheet wood grain printed used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube complete all as specified and directed

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet prelam on the front face & 4mm prelam PVC sheet on back face, supplying & fixing in frame centre core will be PVC battern complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm complete all as specified and directed

S&F aluminium alloy, anodised, sliding door bolt 250mm long dia not less then 12 mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F butt hinges of 100 mm size, medium weight, stainless steel and fixed complete all as specified and directed

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frusted glass and half portion will be fixed with louvers with 4mm thick frusted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed (Al. section thickness 1.50 mm }

M&L for concealed point wiring with 1.5 Sqmm PVC-FR insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green:-

For one light point or fan point controlled by one switch

For 5Amp independent socket point controlled by one switch

For one 3 pin ,5 Amp socket point with other switch on the same board

All as per item No 79 here in before but for power point wiring using with 2.5 sqmm PVC FR insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth wire

S&F modular switch, one way,6 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F modular switch, one way,6 A/16 Amp 230, 1 module complete all as specified and directed.

S&F modular socket 6 A/16-2/3 pin combined 2 module complete all as specified and directed.

S&F modular fan step regulator 120 Watt -2 module complete all as specified and directed .

S&F ceiling rose, surface backlit,three terminal complete all as specified and directed

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

All as per Srl item No.88 above but SPN 32 to 63 Amps, 240 V

S&F sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note :- The quoted rate shall deemed to be included for cutting and chasing in stone masonary and making good the disturbed surfaces

S&F LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

S&F LED Bulk head fitting 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed . Make:- Havells cat part no LHEXCGP7UN5W013/BAJAJ cat part no BIBWP10WLED /CG cat part no LBH-10-CDL.

S&F conventional recess mounted fitting to LED 2 X 2 ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for Armstrong/grid ceiling complete all as specified and directed. Make-Havells cat part no PLANO2X2PLR36WLED857S/ Orient cat part no LTRHD-36-C/Bajaj cat part no.BPSF 36W WH LED

S&F ceiling fan 1200 mm sweep metallic white colour with BEE rated, single phase connected with suitable wire complete all as specified and directed. Make - Havells ES Neo/Crompton HS Plus/Bajaj Electra 50.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 16 sqmm 2 core complete as specified and directed.

Excavation in trenches not exc 1.5 mtr wide and not exc 1.5 mtr depth for laying of cable as the case may be and getting out in any type of soil complete as specified and directed. .

M&L for sand cushioning in trenches for the cable complete as specified and directed.

Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete as specified and directed.

Supply and laying kiln burnt bricks sub class 'B' old size laid in trenches for cable protection complete as specified and directed.

S&F in replacement of GI pipe light grade 40 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete as specified and directed.

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion.Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F electric water heater (Geyser) ISI marked 25 Ltrs capacity AC 230V, 5 star rating Branded heavy duty automatic cutoff and including electric connection lead of suitable size and length and all accessories, grouting of nut bolt/fastner on wall and making good disturbed surface complete all as specified and directed. Make - Racold/Usha/Havells

M&L for GI tubing of 25mm bore, medium grade, ISI marked with all GI fittings (medium grade) laid in trenches, floor, etc., complete all as specified and directed .

S&F Gun metal Gate valve iron wheel head both end screwed of size 25 mm bore for iron pipe complete all as specified and directed.

Cutting existing GI tubing for alterations ,screwing existing tube size of 40mm and 50mm bore for new connection including earth work and clamp, neccessory fitting as per site required complete all as specified and directed

S&F exhaust fans AC single phase 230/ 240 V of size 300 mm sweep metallic body with all accessories including making hole in stone /brick wall grouting &making good in all aspects complete all as specified and directed. Make -Bajaj frehee 300/CG Trans Air 12"/Havells Ventil Air-DS