REPAIRS TO STEEL WINDOW, WOODEN JOINERY, ALUMINIUM DOORS, WINDOW AND PARTITION, FALSE CEILING AND ROOF TREATMENT ALONG WITH ALLIED WORKS AT DGQA AREA UNDER AGE BR SOUTH NO II OF GE SOUTH SECUNDERABAD

Amount

Demolition of cement concrete in roof incl existing roof teratement (other than ground floor) and removing debris to a distance of n.exc 100M away from the bldg. all as specified and as directed.

M & L for 25 mm thick PCC (1:2:4) type B0 by using 12.5mm graded stone aggregate as in roof, where required over slabs including necessary form work and finishing the exposed surfaces fair and even complete all as specified and as directed

M&L for rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacture's instructions as in roof and chajjas, finished the surface fair and even complete all as specifited and as directed (Note : Supply of water proofing compound will be measured and paid separately .)

M&L priming the plastered roof surfaces with bitumenous primer @ 0.20 Kg per sqm and apply hot bitumen VG - 30 @ 1.20 Kg/Sqm over applying APP based polymeric membrane minimum weighing 3.5 Kg per Sqm and minimum 3mm thick reinforced with polyster non wove fabric (Wt not less than 150 gms/per Sqm) by forced hot torch application and apply bitumen base Aluminium paint @ 0.20 Kg/ Sqm complete all as specified and as directedand as directed

Supply only integral water proofing compound complete all as specified and as directed

M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horicontal face of groove with cement mortar 1:3 complete all as specified and as directed

M & L providing cement concrete type B-1 1:2:4 (20mm graded stone aggregate) as in water tank base/ roof curves or muds, stops, rounded or chamfered on edges complete all as specified and as directed

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 250 Ltrs & n.exc 500 ltrs complete all as specified and as directed

Disconnecting existing tanks setting aside (or laying if required) for carry out the roof repairs cleaning and removing all scale & dirts etc from tanks & hoisting reconnecting & refixing in position of the tank capacity exc 500 Ltrs & n.exc 1000 ltrs complete all as specified and as directed

S&F 15 mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified and as directed & as directed

S&F 20mm bore tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors in cluding its taking down complete all as specified and as directed & as directed

S&F 75mm bore PVC (SWR) pipes single socketed, in any length fixed to walls Taking down rain water pipes of any description and any size any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls including taking down rain water pipes of any description and any size any pattern incl all fittings heads, shoes bends etc all as specified and as directed.

S&F straps, supports or stays for rainwater, ventilating pipes, including bolts, if required with MS Flat Iron brackets for fixing PVC (SWR) pipes of 110mm dia single socketed in any length with @ 2.0 mtr interwell fixed to walls complete all as specified and as directed

Dismantling of asbestos cement/galvalume sheet (corrugated or semi corrugated) sheets in roof covering complete all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for as directed and as specified

M&L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed

M&L for prepainted galvalume aluminium zink coating GI based plain steel sheeting 0.5mm thick of any colour having tensile stength of 550 MPA asin roof covering/cladding to wall fixed with self tapping screws as specified and as directed..

S&F MS rolled section angle/square conduit/flat iron of any size as in purlins, Column, rafter, windtie connected to common rafters fixed with angle cleats with necessary bolts & nuts and other connecting materials required to connect complete all as specified and as directed

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and as directed

M&L for Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

Demolition of Brick or stone masonry built in cement mortar. complete all as specified and as directed

M/L brick work with Fly Ash bricks built in CM 1:4 straight or curved exceeding 6m mean radius complete all as specified and as directed

Taking down cement plaster on brick or stone masonry wall/celing etc incl racking out joints haking for key, scrubbing down with water etc complete all as specified and as directed

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed

M&L for rendering 10 mm thick in CM 1:3 on ceiling,chajja,roof projection etc finished even and smooth without using extra cement.complete all as specified and as directed

M/L rendering 15mm thick in two layer ( 10 + 5 mm) CM 1:4 on fair faces of brick or concrete surface II nd layer 5 mm thick with 3% of Water Proofing Compound and finishing the surfaces even and smooth without using extra cement in patch work at various places upto height 7.50m incl necessary formwork complete all as specified and as directed (Note : WPC Shall be measured and paid seperately)

M & L for 10 mm thick rendering in Cement Mortar 1:4 on soffit of slab/sun shade of Concrete surfaces finished even and smooth without using extra cement. complete all as specified and as directed

M&L for rendering 15mm thick plaster in two layers (10mm dubbing coat and 5mm thick finishing coat with chicken wiremesh )in CM 1:4 on fair faces of brick/concrete finished even and smooth without using extra cement incl taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc NOTE :- (Chicken wiremesh will be measured and piad seperately)

S & F Chicken Wiremesh Size and dia of the wire complete all as specified and as directed

M&L for applying two coats of Dr Fixit Rain coat over acoat of prime seal primer incl preparation of newly plastered surface of wall complete all as specified and as directed

M&L for applying three coats of white wash incl preparation of newly plastered surface of ceiling complete all as specified and as directed

M&L for applying three coats of white wash incl preparation of newly plastered surface of walls complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall applying two coats of OBD over one coat of primer incl 3 mm thick birla white putty, complete all as specified and as directed

M&L for preparation of newly plastered surfaces of wall applying two coats of cement base paint over one coat of primer complete all as specified and as directed

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets complete all as specified and as directed

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 605 x 605mm with aluminum main tee cross tee size 25x25x1.6mm and aluminum wall angle size 25x25x1.8mm fixed to wall hanging from soffits/ trusses /bracking using adjustable supporting hanger compressing of GI wire 4mm thick with locking clip. complete all as specified and as directed

S&F 4mm thick of Non asbestos fibre cement building Designer E boards fixed to Aluminium framework in ceiling with screws complete all as specified and as directedand as directed

(a) M&L 12.5 mm thick seamless calcium silicate ceiling made out of 1800x1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish (frame work for ceiling shall be measured and paid separately complete all as specified and as directed (b) S&F GI frame work 605 x 605mm grid for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate chennel 0.9mm thick having two equal flanges of 15mm each and web 45mm suspended from soffit at approox 900mm centre to centre with GI cleats and steel expansion fastener with and inclding ceiling section (not exc. 1.2m length) of 0.5 mm thickness having kurled web of 50mm flange of 26mm each with lips of 1050mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complet all as specified and as dircted..

Taking down shutters of any description exc. 1.00 Sq.m and n.exc. 2.00 Sq.m each complete all as specified and as directed

Taking down Chowkats with shutters (Without taking off shutters from frame) area exc 1.5 Sqm but not exc 4.00 Sqm complete all as specified and as directed

Taking down Chowkats with shutters (Without taking off shutters from frame) n exc 1.5sqm each complete all as specified and as directed

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube,supplying and fixing in opening as per manufacturers instructions complete all as specified and as directedand as directed

Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with 2, raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, with paticle board core supplying & fixing in frame at site as per specification & drawing complete all as specified and as directedand as directed

S&F 35mm thick plain factory made framed panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply The size of rail and stile as per IS 1003 (Part-I Kiln seasoned and chemically pressure treated complete all as specified and as directedand as directed

S & F, 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a). complete all as specified and as directedand as directed

S&F 35 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed

M&L in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination fixed with timber frame work of cupborads book cases etc completle all as specified and as directed.

S&F 75mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed

S & F 30mm width flaps of Continuous (piano) hinges,mild steel, bright finish or electro galvanised in repairs complete all as specified and as directedand as directed

S & F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and as directedand as directed

S&F 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished complete all as specified and as directed

S&F 100mm long stain less steel Butt hinges, fixed complete all as specified and as directed

S&F 100mm long MS Medium weight Butt hinges cold rolled , fixed complete all as specified and as directed

S&F 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S & F 300mm long MS ordinary rat tail rod pattern springs inc. roller & roller plate complete all as specified and as directed

S & F 150mm long floor door stopper of aluminium alloy boly and tongue anodised with hard steel spring fixed in floor complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane.complete all as specified and as directed

S&F 3mm thick sheet glass ordinary quality fixing with putty in square not exceeding 0.5 Sqm in each pane. Incl hacking out old broken glass complete all as specified and as directed

S & F in repairs Stainless Steel Curtain rod 20/25mm dia along with knobs & brackets incl all fitting & fixtures complete all as specified and as directed

Taking down steel/aluminium /windows, /doors, of any size with/without frame and shutters and including with all connected accessories complete all as specified and as directed

S & F Powder coated Aluminium anodized frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified and as directed

S & F Powder coated anodized door shutters, aliminium section weighting 0.55 Kg/M including necessary joinging cleats, galzing clips, ruber neoprene pakcing handles 2 Nos in each door, hinges anodised aliminium snap beading screws etc, complete all as specified and as directed

S&F Powder coated anodied aluminium window and ventilator shutter ,side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as peg stays 150 mm long (1 no),hinges typeB-21 100mm long (2 nos) suitable handle (1 no) complete all as specified and as directedand as directed

S & F aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as specified and as directed

S&F Alu door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S&F in repair door closure hydraulically regulated disignatin No 3 universal type suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed

S & F prelaminated particle board 9mm thick interior grade pre laminated one side with decorative choice lamination and other side balancing white lamination fixed with screws complete all as specified and as directed

S & F brass Mortice lock 4 leavers vertical type size 100mm complete all as specified and as directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples complete all as specified and as directed

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed in panels of joineries with stainless steel wire staples fixed in repair complete all as specified and as directed

S&F Factory made steel window, box type, using ERW hollow 'P' section, comprising double frame for and including gauged and glazed skeleton shutter, jointed internally with flat iron 40x4mm complete including grill/ guard bars of 8mm square bars fixed horizontally @100mm C/C including mild steel hinges, handles, tower bolts, stops, lugs etc, complete all as specified and as directed

M &L Welding in repairs to the thickness exc 6mm but n. exc 9mm steel section, welded length n. exc 2.5 cm in each length etc complete all as specified and as directed

SRI DHANESWARI ENGINEERING WORKS

BEEGEE DESIGN SYSTEMS

K LAKSHMAN SINGH AND CO

harshraj and co

S.R.M.K Enterprises

M/S DIVIJA BUILDERS

G SATISH REDDY AND CO