SPL REPAIRS TO WASHROOM AT BLDG NO P 13 AND P 14 AT M MED REGT AT FARIDKOT MIL STN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

S&F Premium quality glazed ceramic tile of size 450mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with spacer, tile adhesive and epoxy grouted with same make as of tile Make Glosstra series of Samany or equivalent in Johnson/Kajaria over including 15 mm thick rendering CM (1:4) and pointed in white or colour cement to match complete all as specified and directed

S&F Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 X400 mm) as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified as directed by Engr-in-Charge

M&L for Granite (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified

Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified

Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :- (a) Cleaning of sunken portion and roughening to receive treatment. (b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces (Note : WPC shall be measured and paid separately) (c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer. (d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation. (e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / equivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers. Note: The plan area of floor shall be considered for payment

M&L for PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B0 (12.5mm graded aggregate) with WPC under floor over sunken complete all as specified and directed Note : WPC will be measured and paid separately. (WPC will conforms to IS: 2645-2003)

Supplying and laying of CPVC pipes of 40 mm SDR 11 & Plain CPVC SDR 11 fittings and all other fittings required on walls/ceiling or laying in floors complete including cutting chases in wall made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as specified

M&L for PCC (1:3:6) type C-2 (using 40mm graded aggregate) 75mm thick as in plinth protection including making grooves complete all as specified.

Taking up or down GI tubing 15mm bore pipe complete all as specified.

Taking up or down GI tubing 20 mm bore pipe complete all as specified

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other fittings required on walls/ ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work bore of pipe 20mm complete all as specified and directed by Engr-in-Charge

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other fittings required on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work bore of pipe 25 mm complete all as specified and directed by Engr-in-Charge

S&F of 20 mm inner dia CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified.

S&F of 20 mm inner dia CPVC Brass Elbow fittings complete all as specified

S&F of 20 mm inner dia CPVC Brass T fittings complete all as specified

S&F in repair Rotational moulded polythylene 1000 ltr capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed & dismantling of old water tank complete all as specified

S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

S&F Brass CP Basin mixer/wall mixer/sink mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed.

S&F in repair 15 mm bore chromium plated Angular/ stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified

S&F in repair vitreous china wash basins, size 600x450mm counter type (oval shape), CP Bottle Trap, fancy type CP pillar trap including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified

S&F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to anti-syphonage pipe etc including making good to floor complete all as specified and directed

S&F in repairs Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) (R) complete all as specified

S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (Minimum weight 60 gms) complete all as specified

S&F in repair one piece/single body PVC blow moulded concealed cistern, pneumatic type; capacity 9-10 ltrs, including chrome finish dual flush control plate, flushing pipe and fixing brackets complete assembled and fixed at site complete all as specified

S&F in repairs vitreous China 1st quality one piece wash down water closet wall hung EWC white/ivory/off white including all necessary accessories like rag bolts/gel basket with wash down water closet wall hung type with plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated door aluminised hinging device complete all as specified

S&F of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified

S&F PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make all as specified

S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified

S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed.

S&F Stainless steel fancy type peg set of six and fixed in position with steel screws complete all as specified and directed.

Taking down Cast iron pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified

S&F 110 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) pipes heavy grade single socket in any length with rubber ring joint laid in floor complete all as specified and directed.

S&F 110 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes complete all as specified and directed

S&F 75 mm bore of pipe PVC (SWR) bends heavy grade of any radius / shoe fixed to PVC pipes complete all as specified and directed.

M&L for 75mm dia of long body PVC Floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified

M&L for PVC (SWR) junction single,(Single T), 100 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with oval access door as in repairs complete all as specified and directed by Engineer-in-Charge

S&F in repairs PVC (SWR) vent cowl 75 mm complete all as specified and directed

S&F Salt-glazed stoneware gully traps 150x 150 mm, square or round mouthed, type 'P’ complete all as specified and directed

Taking down cement plaster from ceilings & brick walls including any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-in-Charge.

M&L for rendering 15mm thick in cement mortar in 1:4 on fare face of brick work or concrete surfaces even and smooth without using extra cement & with using integral water proofing compound. (Note : WPC shall be measured and paid for separately)

M&L for rendering 10 mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified & directed by Engr-in-Charge

M&L for rendering 10 mm thick in cement mortar in 1:3 on ceiling all as specified and as directed.

Supply only liquid water proofing compound all as specified

M&L for preparation of newly plastered or unplastered surfaces of wall for Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified

M&L for complete removal of existing treatment to wall and applying two coat of distemper oil emulsion white/tinted with a coat of wall care putty finished surface complete all as specified

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge

M&L preparation of newly plastered or unplastered surfaces of ceiling and applying three coat of white wash finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge

M&L for complete removal of existing treatment of old decorated surfaces of ceiling by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and filling in depressions to make smooth surface and applying three coat of white wash finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge

M&L for complete removal of existing treatment of old decorated surfaces of wall by mechanical sander/ brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including filling depression of scraped surface with wall putty two coats 1.5 mm thick each and Finishing walls with Two coat of Acrylic Smooth exterior paint of required shade over and including one coat of exterior primer complete all as specified

Dismantling of brickwork built in cement mortar of any description complete all as specified and directed by Engineer-In-Charge

M&L for brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc. complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sq. m each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

S&F 100 mm long, Stainless Steel hinges with stainless steel screws complete all as specified and directed

S&F Stainless Steel barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.

S&F Stainless Steel sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F 140 mm floor door stopper of Stainless Steel body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

S&F stainless Steel handle 150 mm size complete all as specified and directed

Supply and fixing factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).

Providing and fixing factory made UPVC white colour Sliding window Three track area not exceeding 2 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 Nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.)

Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 110 mm (4") down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of: 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985)- 610 grams/m² (> 85 microns). Material Grade IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2.Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bhatinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System. REF DRG NO. BTD-916. Make: Shaivi or equivalent as approved by GE.

Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3'') down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance 75 mm (3"): Pipe Support Clamping made of: 1. Profile Bracket having Wall Distance 75 mm (3") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923. 2. Continuous Slotted "C" Channel with ribs to be used of size 250 mm (10") made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. 3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated. Hotdip Galvanizing: As per IS 2629 (1985)- 610 grams/m² (> 85 microns). Material Grade IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Profile Bracket Wall distance 75 mm (3") - 2 Nos. 2.Continuous Slotted C Channel of Size 250 mm (10") - 1 No.; 3. U Bolt Rubber sleeve mounted for 110 mm (4") PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2") - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Bhatinda Zone Technical Drawing (TD) of Factory Made Pipe Supporting System. REF DRG NO. BTD-916. Make: Shaivi or equivalent as approved by GE.

S&F Sheet glass of 4.8 mm, ordinary quality and glazing but exc 0.5 sq. m in each pane with oil putty in square required complete all as specified and directed

S&F 5mm Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down MCB/ MCCB of any make and making good to disturbed area all as specified and directed by Engr-in-Charge.

Taking down submain wiring 2 run/ 4 run with earthing cable any type any size and making good to disturbed area complete all as specified

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100V grade FRLS with multi-stranded copper conductor drawn through concealed in wall/roof/ceiling surface in existing PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, junction boxes, 2mm thick galvanised steel pressed modular boxes of suitable sizes for mounting of modular switches, sockets, fan regulator etc covered with modular cover plate of required size fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly for One light point/Fan point/Exhaust point controlled by one way switch completed all as specified and directed

All as per Srl Item No.79.00 here-in-before but one three pin socket out let 5 amps on the same board with other switches

All as per Srl Item No. 79.00 here-in-before but with 2.5 sqmm cable for 1 No 16 amps socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multi-stranded with copper conductor green in colour as earth continuity conductor

S&F PVC Lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed

S&F of Rechargeable LED tube light fitting 20W, (4 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed by Engineer-in-Charge. Note:- LED tube light must be rechargeable and minimum 4 hours battery backup

S&F LED inverter rechargeable bulb for 4 hours power backup of power rating 1x10 Watt having luminous efficacy not less than 100 lumens/ watt all as per specification & directed by Engr-in-Charge. Note:- LED bulb must be rechargeable and minimum 4 hours battery backup

M&L for ceiling rose 3 terminal / PVC / polycarbonate isolated body complete all as specified

M&L for submain wiring with two single core PVC FRLS insulated copper conductor 6 sqmm and same 6 sqmm for continuous earth wire drawn in to existing concealed PVC conduit and including making good disturbed surfaces of walls as necessity complete all as specified and directed. Note: Cost of earth wire including in sub main wiring

S&F Modular switch 1 way 6 amps one module switch all as specified and directed by Engr-in-Charge

S&F Modular socket 6A 2/3 pin, 2 module socket all as specified and directed by Engr-in-Charge

S&F sheet metal enclosure for DB's SPN 230 volts 8 way double door complete all as specified and directed.

S&F amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

S&F 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning all as specified and directed

Supplying and fixing and commissioning of electric water heater (Geyser) storage type ABS body of capacity 25 litre, BEE approved 5 Star rating, 230 V, single Phase, AC supply, inner tank made out of heavy duty stainless steel sheet (Designed with single weld line, factory tested with hydraulic pressure as per latest IS code) with glass lined coating complete with all accessories such as safety valve, thermostat, NRV, connection piece PVC connection for Hot and cold water, three core PVC insulated PVC Sheathed copper conductor flexible cable including 15 Amp plug suitable for existing socket and fixing material, 04 Nos Nut bolt grouting in wall in PCC (1:2:4) using 12.5mm graded stone aggregate for hanging the geyser and making good the disturbed surface complete all as specified and directed

S&F DBOXx SRCD (Socket Residual Current Device) is ready plug & play all -in-one device that provides protection to humans from electric shock due to direct or indirect contact as well as provides protection from overload and short circuit faults Single pole complete with one SPN MCB 20 Amps, 240 V, AC supply, and plug top all type as specified and directed by Engr-in-Charge

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 Mtr below ground level with top edge of earth plate at a depth not less than 1.5 Mtr below ground level, earth plate surrounded by 15cm thick packed layer of charcoal dust and common salt, connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts and washers of galvanized iron or steel and thimbles upto equipment and other end of the earth wire connected to earthing test point and protected by galvanized iron pipe light grade 15mm dia upto earthing test point / equipment fixed with 2 Nos. of mild steel clamps made out of 25mm x 3mm flat iron and perforated water pipe 20mm dia galvanized iron pipe heavy grade 2.25 Mtr long and top with socket and plug and bottom connected to earth plate by silt and two bolts / nuts / washers complete with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C-1 and cast iron cover with frame all as shown on electrical plate No. 3 of MES Schedule Part - I of SSR-2009 including taking down old Unserviceable earthing any type complete all as specified and directed by Engineer-in-Charge. Note : (i) Outer edge of earth pit will be 1 Mtr away from the outer edge of PCC Chamber. (ii) Galvanized iron earth wire 4mm dia upto earthing test point / equipment is included in this item. (iii) Water pipe shall be provided in slanting position

S&F exhaust fan steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including self-closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fasteners 10mm dia 100mm long including hole in wall and making good the disturbed surface complete all as specified and directed by Engineer-in-Charge

Supply and laying Rigid non-metallic PVC conduit size 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. with all fitting including taking down old Unserviceable pipe any type complete all as specified. Note :- A Sum of Rs. 62,990.34 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 35 (Schedule of credit) of Tender Documents.

Vinod Kumar Bajaj (BID ID -3487209)

N.G BUILDERS (BID ID -3493012)

MS JAIN PAINT AND HARDWARE STORE (BID ID -3493946)

SHIV SHAKTI BUILDERS (BID ID -3488995)