WBPWD/SEWEC/AED /NIQ-103/2018-19

Amount

S&F SMDB Including the following items (Make L&T/Seimens/ABB) ) i) 320A 4P MCCB 36KA MCCB TM WITH SPREDER TERMINAL (Make L&T DN3-400D-CM94005OOQ1OG/Seimens/ABB)-01 no, ii)100A TP 36KA MCCB TM (Make: L&T DN0-100D-CM97893OOK2OG /Seimens/ABB)-02 no, iii) 63A TP 36KA MCCB TM (Make: L&T DN0-100D-CM97893OOH2OG/Seimens/ABB)-03 no, iv)32A TP 36KA MCCB TM(Make: L&T DN0-100D-CM97893OOK2OG/Seimens/ABB)-03 no, v)RYB INDICATION-03 no, vi) 3 PH DIGITAL VOLTMETER(Make: L&T WL132010OOOO/Seimens/ABB)-01 no, vii)3 PHDIGITAL AMMETER(Make: L&T WL131010OOOO/Seimens/ABB)-01 no, viii)300/5A CT (KAPPA)-03 no, ix)8 WAYS SMDB TYPE - TN400D(Make: L&T TN400D-DA40D1084CZZ0/Seimens/ABB)-01 no,

x)METERING EXT BOX(Make: L&T TN400D-CM90439OOPO)-01 no, xi)BOTTOM CABLING BOX(Make: L&T TN400D-CM90437OOOO)-01 no, xii)SIDE CABLING BOX (LEFT)-(Make: L&T TN400D-CM91087OFOO)-01 no, xiii)SIDE CABLING BOX (RIGHT)-(Make: L&T TN400D-CM91088OFOO)-01 no, xiv)CORNER BOX(Make: L&T TN400D-CM9089OOOO)-01 no, The SMDB should be fixed on suitable size CC muffing.

S&F 415V 315A CHANGE OVER SWITCH IN SS ENCLOSURE ON ANGLE IRON FRAME AND TO BE FIXED ON WALL(Make L&T CO3-315 - CO33150OSOO/Seimens/ABB)

S&D & fabrication the koisk box size 500mmx500mmx300mm duly fabricated with suitable crc shee incl. S&F suitable size MS angle/flat with top hooded type rain protection shed front and back openining with two palla syatem incl. looking arrangement steel thick 3mm crca outer body sheet steel thick 1.6mm crca for interior body as per direction of EIC. 1no suitable size of hylamp sheet holding the electrical accessories with suitable size cc muffing with bricks wall foundation the ground level with hollow centre portion for cable entry incl. filling up hollow portion with dry sand after connection incommimning & out going cables. the box comprisiong of following accessories: INCOMMING- -a)415V, 63A TPN SFU with HRC fuse switch unit------1set(L&T/ABB/Seimens ) b)415V,100A 4 bar electrolytic Tinned cu bus-bar(40x10mm)with proper color(R,Y,B&BLACK)supported on non hygroscopi insulator incl. with different size drilled hole incl. S&F )EI danger board suitable size ----2nos OUTGOING:- A)32A DP SFU with DIN Type hrc fuse(L&T/Seimens/ABB) ------3 set B) MF1 starter 3nos including wiring with suitable size cu wire.

Distribution Wiring:- Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Polycab /KEI/Havells/Finolex) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for horizontal only & vertical run concealed], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with GI Modular type (8/12 Module) Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish a) avg run 8 mtr

Distribution Wiring:- Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: Polycab /KEI/Havells/Finolex) partly in 20mm size PVC rigid conduit 'FR' (Precision make) for horizontal run & above false ceiling portion only], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with GI Modular type (8/12 Module) Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish[PVC Rigid Conduit only for horizontal run & above false ceiling and vertical run concealed] a) avg run 8 mtr

b) Do -do-Do on Board 5A 3/5 Moduler Plug point

wiring by PVC insulated unsheated copper conductor in 20/25mm dia rigid conduit( vertical run conceal )as per GS (Make- Pollycab/KEI/Finolex/Havells)

i) 2X1.5sqmm+1x1.5sqmm(ECC)

ii) 2X2.5sqmm+1x1.5sqmm(ECC)

iii) 2X4.0sqmm+1x2.5sqmm(ECC)

iV) 2X6.0sqmm+4sqmm(ECC)

V) 4X6.0sqmm+2x4sqmm(ECC)

VI) 4X10sqmm+2x6sqmm(ECC)

S&F 8 way VTPN DB with 3 phase in coming & TP/SP outgoings, as follows with vertical type busbar system, in SS enclosure (IP-43 protection) double door comprising of neutral link incl. & provision for earthing attachment concealed in wall after cutting the brick wall and mending good the damages to original finish incl. interconnection with suitable size of copper wires and earthing attachment. Incoming-415V, 10KA, 100A, FP MCCB C curve,---1no outgoing-415V, 10KA, 63A T.P DX MCB C curve,.----5nos 415V, 10KA, 40A T.P DX MCB C curve,.----2nos 230V,10KA, 6-32A S.P MCCB C curve, ----3nos. Make-( Legrand/Siemens/Hager)

S&F 8 way VTPN DB do...do.. Incoming-415V, 10KA, 100A, FP MCCB C curve,---1no outgoing-415V, 10KA, 63A T.P DX MCB C curve,.----3nos 415V, 10KA, 40A T.P DX MCB C curve,.----1nos 230V,10KA, 6-32A S.P MCB C curve, ----6nos. Make-( Legrand/Siemens/Hager)

S&F 8 way TPN DB do...do.. Incoming-415V, 10KA, 63A, FP Isolater C curve,---1no outgoing-230V,10KA, 6-32A S.P MCB C curve, ----24nos. Make-( Legrand/Siemens/Hager)

S&F 4 way TPN DB do...do.. Incoming-415V, 10KA, 63A, FP Isolater C curve,---1no outgoing-230V,10KA, 6-32A S.P MCB C curve, ----12nos. Make-( Legrand/Siemens/Hager)

S&F(2+8) way SPN DB do...do.. Incoming-230V, 10KA, 40A, DP Isolater C curve,---1no outgoing-230V,10KA, 6-32A S.P MCB C curve, ----8nos. Make-( Legrand/Siemens/Hager)

S&F(2+12) way SPN DB do...do.. Incoming-230V, 10KA, 63A, DP Isolater C curve,---1no outgoing-230V,10KA, 6-32A S.P MCB C curve, ----12 nos. Make-( Legrand/Siemens/Hager)

S&F 250 volt Modular plug socket fixed on metal box 6 module of comprising of lowing accessories.(make Legrand/simens) a)6A switch &socket---2 Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall/ floor as required.

S&f 240v ac/dc Superior type Ding Dong call bell (Brand approved by EIC) as per GI

S&F 240V 16-30A,OLP for A.C as per direction of EIC

S&F 250 volt Modular plug socket fixed on metal box of comprising of lowing accessories.(make Legrand/simens) a)16A switch &socket---1 Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall/ floor as required.

S & F 250v moduler type power unit on 8 module board comprissing of following accessories ( Make-Legrand/Seimens/ABB) for TV a)6A switch &socket---2 Set b) TV socket outlet two moduler for cable socket--1 Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall/floor as required.

S&F 250 volt Modular type plug socket(689011)of comprising off lowing accessories.(make Legrand/simens) a)16A switch &socket---1 Set b)6A switch &socket---2 Set C) RJ 45 one moduler for cable socket--1 Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall/ floor as required.

S & F 250v moduler type power unit comprissing of lower acces.( Make-Legrand/seimens/ABB) for telephone a)RJ11 one moduler cable socket...1Set Incl. Necessary interconnection by pvc insulated copper wire flushed in wall/ floor as required.

Supplying & fixing 250 V 3/6 Pin 25 A Modular type plug socket and Strater fixed on sheet metal box and earthing attachment.(For AC/ gyser)

S/Laying 1.1 kv grade 4 core 95 sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor(Havells/Glostar/Polycab) in following manner as per GS

Through UG thrench

Through GI pipe/Kiosk box

Through wall with saddle

S/Laying 1.1 kv grade 4 core 50 sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor(Havells/Glostar/Polycab) in following manner as per GS

Through wall at an ave depth of 4 inch

Through UG thrench

Through wall with saddle

S/Laying 1.1 kv grade 4 core 35 sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor(Havells/Glostar/Polycab) in following manner as per GS

Through wall at an ave depth of 3 inch

Through UG thrench

Through wall with saddle

S/Laying 1.1 kv grade 4 core 25 sq.mm ---do---do----do-- as per GS

Through wall at an ave depth of 3 inch

Through UG thrench

Through wall with saddle

S/Laying 1.1 kv grade 4 core 16 sq.mm ---do---do----do-- as per GS

Through wall at an ave depth of 3 inch

Through UG thrench

Through wall with saddle

S/Laying 1.1 kv grade 2 core 10 sq.mm XLPE/PVC insulated and sheathed, armoured cable with Al.conductor(Havells/Glostar/Polycab) in following manner as per GS

Through UG thrench

Through GI pipe/Kiosk box

Through wall with saddle

S&F compession gland with finishing end as per G.S.

i. 2core 10 sqmm

ii.4 core 16 sq.mm

iii.4 core 25 sq.mm -

iii.4 core 35 sq.mm -

iii.4 core 50 sq.mm -

iii.4 core 95 sq.mm -

Supply & Delivery of 4 Ft. 18/20 Watt single/twin florescent light fitting for indoor application,complete with all accessories & Lamps having following Model / Cat No.( Make -philips/Crompton/Wipro/Bajaj) Single LED 18/20W [Make : Philips TMC 501P 1xT-LED 22 W , LED Lamp MAS LED Tube 1200 mm 18 W /Crompton- tube LTT8-20, & batten IGP131LT8-16 /Wipro/Bajaj] as per direction of EIC

S&F 15 watt wall type decoretive light Fitting ( Make : philips (cat no-17182/87/16/Crompton/Wipro/Bajaj)with all accrss.as per direction of EIC

S&F 20 watt wall type decoretive light Fitting for corridor portion ( Make: philips cat no-string 17086/47/Crompton/Wipro/Baja)with all accrss.as per direction of EIC

S&F 12 watt wall type decoretive LED light Fitting (Make : philips cat no-16245 /Crompton/Wipro/Bajaj )wall light with all accrss.as per direction of EIC

S&F 9 watt LED Mirror light Fitting ( Make: philips/Crompton/Wipro/Bajaj with all accrss.as per Direction of EIC

S&F recessed mounted decorative luminaire 22 W LED light fitting make Philips/Crompton/Wipro/Bajaj

S&F 2W LED steplight (Make : philips cat no-34151/Crompton/Wipro/Bajaj) with all accrss.

S&F 48inch sweep AC celling fan with all accress. Usha Striker Galaxy/ Platinum / Crompton Aura metalic Antidust) as per direction of EIC

s&f 100w Modular electronic step type fan regulator as per direction of EIC

S&F 9 inch dia Exhaust fan with louver shutter after cutting wall as to GS. (Make : EPC Heavy duty) as per direction of EIC

S&F 12 inch dia Exhaust fan with louver shutter after cutting wall. (Make : EPC Heavy duty) as per direction of EIC

S&F 400 mm Swipe metal body wall bracket Fan (Make : crompton/usha/Orient) as per direction of EIC

S & F post light for garden (Make: Philips model no 15463/54/16 /Crompton/Bajaj/wipro) with all access. Including Eco classic E27 24W LED lamp. as per direction of EIC

S&F LED chain light with all access (Make : Philips /Crompton/Bajaj/wipro) as per direction of EIC

S & F endura LED Bulkhead light ( Make : Philips model no WT202W LED 6S PSU S2 EC /Crompton/Bajaj/wipro) with all access. Including Eco classic E27 24W LED lamp. as per direction of EIC

S & F light (Make : Philips model no BRP408 LED HP/CW 240V PSU GR 70W /Crompton/Bajaj/wipro) with all access for compound lighting. as per direction of EIC

S & F Gate Light Fittings ( Make-Crompton LPTO 40 -CDL/M /Philips/Bajaj/Wipro)

S/F 80mm GI pipe pole 2 mtr’s long (ISI-M) on roof with base block 6:3:1 and CC muffing 0.45 x 0.45 x 0.6 mtr and necy drilled holes for pole with S&F 200 x 150 x 100mm GI loop box as per GS and painting to be installed at roof of the building incl S/F 40mm dia 1.5 mtr long GI pipe single arm bracket with 90mm dia GI pipe jacket & through bolt and nuts as per direction of EIC

S&L of 19 mm bore 3mm thick polythene pipe embeded in wall for drawing wire to each TV point and intercom as per direction of EIC

S & F 10L storage type gyser ( Make : Venus Splash Geyser /Bajaj ) including Necessary valve & Pipe connection

S&F follwing sizes smart LED TV ( Make : Sony) a) 32" flat full HD smart LED TV

b)48" flat full HD smart LED TV

Earthing with 50mm dia (TATA medium) GI pipe.3.64mm thickx3.04mtr long and 1x4swg Gi (Hot Dip) wire (4mtr long), 13mm diax80mm long GI bolts, double nuts, double washer includin S & F 50mm dia GI pipe protection (1mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65mtrs below the ground level and restoring surface dully rammed.ince.excavation of soil(2m3 each)

S & F Earth bus bar of 25 x 3 mm GI flat ( as per G.S)

Earth continuity wire 10swg (as per G.S)

SITC of EPABX Supply, Installation , Testing & Commissioning of Digital IP communication system with PCM/TDM switching technology with different port, PSU, CPU, Mother board networking having integrated voicemail, Automatic call distribution, web based management with point to point communication as per direction of EIC

Supply & Fixing of Beetel/Syntel CLI telephone set as per direction of EIC

Supply & Laying of 20 pair PVC copper cable recessed in wall in prelaid polythine pipe as per direction of EIC

Supply & Laying of 4 pair PVC copper cable recessed in wall in prelaid polythine pipe as per direction of EIC

Supply & Laying of 2 pair PVC copper cable recessed in wall in prelaid polythine pipe as per direction of EIC

Supply & Fixing of 50 pair metal AD box with terminal strips including termination of cable pairs as per direction of EIC

Supply & Fixing of 20 pair metal AD box with terminal strips including termination of cable pairs as per direction of EIC

Supply & Fixing of Rosset box RJ11 as per direction of EIC

Supply & Fixing of KTS telephone set as per direction of EIC

Installation, Testing, Commissioning, Programming and diversion of circuit for EPABX system

M S CITY ELECTRICAL CO

JUGAL ELECTRICAL ENGINEERING CORPORATION

SREE GURU ENGINEERING