SPECIAL REPAIR TO INTERNAL ROAD FROM NEC SHED TO OLG SHED OF ASC BN, MAIN ROAD TO REGIMENT SARV DHARMSATHAL OF FD REGT AND OFFR MESS TO GUEST ROOM OF MADRAS REGT UNDER GE 859 EWS

Amount

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n. exc 400 sqm exc 50 mm and not exc 100mm deep and removing the the same n exc 50 metres and stacking where directed,

Repairs to pot holes not exc 1 sqm each including sweeping free from dust and mud or water,scoring sunken sufaces in roads ,paths, etc, cutting around edges to at least 25 mm in depth,making good by applying tack coat at 5 kg per 10 sqm putting in premix as specified for thin bituminous carpet (2 cm thick with 0.27 cum of stone chippings mixed with 14.6 kg of paving bitumen) well rammed and sealed with liquid seal coat, applying evenly binder @ 9.8 Kg per 10 sqm blinding with 6.3 mm size stone chippings @ 0.09 cum per 10 sqm and rolled to a uniform smooth surface complete all as specified and directed.

M&L for 75mm thick (compacted thickness) WBM, with coarse aggregate of grading 2 (63 to 40mm size) spread rolled and consolidated to gradient materials and camber.

Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc.

Applying evenly a priming/ tack coat with bituminous primer of paving bitumen at 10 kg per 10 sqm. On new surface

M & L for preparing existing black top surfaces as brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc.

Applying evenly a priming tack coat with bituminous primer of paving bitumen at 5 kg per 10 sqm.

M&L for Bituminous premixed carpet 30 mm consolidated thickness with 0.40 cum of stone chipings mixed with 21.90 kg of paving bitumen (binder) ,rolled and compacted to required gradient and camber etc complete all as specified and directed.

M&L Premixed sand seal coat with 0.06 cu.m of sand mixed with 6.8 kg of paving bitumen, applied and rolled to a uniform smooth surface

M&L for applying thermoplastic reflective paint as in road marking of minimum 2.5mm thickness, single coat as in making of 100/150 mm width using Hot mark thermoplastic paint (Hot application) white /yellow by indigenous modern, propelled road marking machine as directed including all ingredients all ingredients such as binder glass,beads etc.

S&F Solar cat eye aluminum aalloy shall (100% water proofing design according to 65) of size 125mm x125mm x25mm ( shank 65mm) of high efficiency mono rysta solar panel 2.4V/0.3 watt one NI-ed rechageble battery 91.2V/1600MA) consing of super bright LED with 10,000 mcd completed as per manufactrures etc . all as per specified and directed .

Supply and fixing of B24 M USA brand Markers (Cat eye ) made of non breakable polycorbonate with electronically welded prismatic ratio reflective ,lens on centre for maximum ratio reflection in wet and dry condition. The body shall be dust proof i.e. no dust accumalation on the lens coated abrassion resistent creameer coating and space Built .

suppply ans fixing meta ltubular delineator madeout of ABS roumd body fitted with 2 nos 65 mm dia highly reflected made out of PMMA and mounted on 45/50mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic ealstomer 3 bands of green , red and yellow reflecter radius tape 25 mm wide stripps with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150 x150 x300 mm) type B1 copleted all as specified and directed .

supply only polycarbonate convex mirrors 80cm dia make 3m or equivalent in AUTOMATE/ACE/EYE/ISI marked, polycarbonate body mounted on 16 gauge ms pipe of 75 mm outer dia fixed 1.50 mtr above ground surface and 60 cm below gd incl PCC foundation of size 30 x30 x30 cm with PCC 1:3:6 type C1Bottem part of ms pipe welded with 05 mm thick 125mm x125mm ms plate for anchorage in PCC . ms pipe shall be painted stove enamelded paint over a coat of red oxide incl necessary earthwork exca in anr soil , removal and disposal of spoil complete all as directed by E-in - charge ( note convex mirrors shall be held in GE 859 EWS sample room and shall be got approved by GE before fabrication of items in bulk ) .

M/S TSEWANG ENTERPRISES (BID ID -3084611)