New Electrical Requirement for HPE and its related Equipments at PEB-3 of CoE-MIC at CSIR-CFTRI, Mysuru

Supplying, Testing and Successful Commissioning of 3.5 Core x 95.0 sq.mm PVC insulated and PVC Sheathed / XLPE Aluminium armoured conductor cable of 1.1 KV grade along with suitbale size HDPE Pipe and to run on wall, fixing with suitable GI clamps, hardwares etc., as required. Make: Please refer Special Electrical Conditions under Tender Document File.

Supplying, Installation, Testing & Successful Commissioning of 16 Modular GI Box along with Modular Base & Cover Plate for Modular Switches and Sockets in recess / wall using suitable hardwares etc. as required and as per directions of Engineer In-Charge and consisting of following Modular items a) 5/6 Amp Switch - 2 Nos; b) 6 Pin 5/6 Amp Socket Outlet - 2 Nos; c) 15/16 Amp Switch - 2 Nos; d) 6 pin 15/16 Amp Socket Outlet - 2 Nos and e) 32 Amps, 2 Pole, "C" Curve, 10kA, 230V Mini MCB - 1 No. Internal wiring for 5 Amps Switch & Socket with 4.0 sq.mm FRLS Multistrand, Single Core Copper Wire; for 15 Amps Switch & Socket with 6.0 sq.mm FRLS Multistrand, Single Core Copper Wire. Red and Black Colour for Phase and Neutral and 4.0 sq.mm FRLS Multistrand, Single Core Copper Wire, Green Colour for Earthing Loop and terminate all the wires using suitable size Copper Lugs as required. Make: Please refer Special Electrical Conditions under Tender Document File.

Supply, Installation, Testing and Successful Commissioning of 25KVAR Capacitor Bank in the Mains Output using 6.0 sq.mm PVC Insulated Flexible FRLS / HFFR Copper Wire. Make: Please refer Special Electrical Conditions under Tender Document File.

Supply, Installation, Testing and Successful Commissioning of 9 Inch Dia, 225mm / 230mm sweep, industrial type ready to use Exhaust Fan having Bird Cage with 1.5 FRLS PVC insulated, copper conductor, single core cable and to fix with required size of MS frame duly painted with one coat of primer and 2 coats of paint, suitable hardwares etc., and provide one no. of 3 Pin 5/6 Amps ISI make Socket along with Gangbox and 3 Pin 5/6A Amps ISI make Plugtop as required. Make: Please refer Special Electrical Conditions under Tender Document File.

Single Door IP55 Indoor MCCB Box of size 12" (W) x 24" (H) x 12" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 1 No of 250A, 36KA Range 4P MCCB and 4 x 250A capacity Copper Bus-Bars for R,Y,B & N. The Bus-Bars should have minimum 4 sets of holes to connect Copper Cables / Wires of size from 10.0 sq.mm to 25.0 sq.mm. The Box should have provision for mounting on the wall with required hardware arrangements, locking arrangements for door, RYB LED Indicating Lamps, 2 nos of earth bolts on either side of the box, 3 numbers of removable plate at the top of the box for Cable/Wire entry, any fire proof sheet to cover the bus-bars, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box. To connect the existing Aluminium / Copper Cable as input to the MCCB. Make: Please refer Special Electrical Conditions under Tender Document File.Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker.

Single Door IP55 Indoor MCCB Box of size 12" (W) x 24" (H) x 12" (D) made out of 1.6mm thick CRCA sheet steel enclosure, painted with two coats of red oxide & two coats of enamel paint siemens gray colour and consisting of 1 No of 200A, 36KA Range 4P MCCB and 4 x 200A capacity Copper Bus-Bars for R,Y,B & N. The Bus-Bars should have minimum 4 sets of holes to connect Copper Cables / Wires of size from 10.0 sq.mm to 25.0 sq.mm. The Box should have provision for mounting on the wall with required hardware arrangements, locking arrangements for door, RYB LED Indicating Lamps, 2 nos of earth bolts on either side of the box, 3 numbers of removable plate at the top of the box for Cable/Wire entry, any fire proof sheet to cover the bus-bars, water proof vents on both the sides covered with wire mesh from inside to avoid entry of any insects entering inside the box. To connect the existing Aluminium / Copper Cable as input to the MCCB. Make: Please refer Special Electrical Conditions under Tender Document File. Note: Labelling to be done for Input & Output Control in Paint / Acrylic Sticker.

Labour charges for digging 8 feet of depth below ground level, including hard soil, rocks etc.,if any encountered, fixing the Item No:17, refilling of soil etc., as required. (along with charcoal / coke and salt from S.No:17 as required, already estimated under S.No.17).

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Please refer Special Electrical Conditions under Tender Document File. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No. 8. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No. 8. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No. 8. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No. 8. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: Same as Item No. 8. Note: All start & end point of the wires are to be terminated with "Cu" Lugs of suitable type and size. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 20A, 240V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20A "C" curve, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioing etc. as required. Make:Same as Item No:5

Supplying and fixing 20A, 415V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioing etc. as required. Make:Same as Item No:5

Supplying and fixing 30A, 415V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioing etc. as required. Make:Same as Item No:5

Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet. As per IS 3043, charcoal / coke and salt should be refilled with 50 Kg each per earthpit. The copper flat to be connected from the plate and to be brought until the funnel, terminated with Brass / SS Bolts and Nuts.

Providing and laying earth connection from earth electrode with 4.00mm dia copper wire in 15mm G.I. pipefrom earth electrode including connection with copper thimble excavation and refilling as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface / recessed conduit / submain wiring / cable as required.

Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 3 1/2 x 95.0 sq. mm (45mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make: Please refer Special Electrical Conditions under Tender Document File. Note: Each means, all 4 leads of the UG Cable at one end.

Please Enable Macros to View BoQ information