Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.2 LAccepted-Finance | L1 | Accepted-Finance Accepted | |
| 2 | L2₹10.5 L+₹21,522.98 (2.10%)Accepted-Finance | L2 | Accepted-Finance Accepted | |
| 3 | L3₹10.6 L+₹32,284.47 (3.15%)Accepted-Finance | L3 | Accepted-Finance Accepted |
Tender Value
₹10.2 L
Closing Date
23 Feb 2026, 5:00 pmClosed
Executive Engineer work division Chiplun ZP Ratnag
Dr.Babasaheb Ambedkar Bhawan,Malanaka, Z.P.Ratnagiri
Constructing Anganwadi Building at Kolkewadi Pashchim Hasarewadi Tal Chiplun Dist Ratnagiri
2026_RATNA_1278726_1
RZP/WD-Chiplun/E-Ten LabourCoOp Society-57/25-26
Open Tender
Civil Works - Buildings
Percentage
180 days
Chiplun
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Exempted
9 Mar 2026
16 Feb 2026
25 Feb 2026
16 Feb 2026
23 Feb 2026
16 Feb 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the
building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means | 16.47 | Cubic Metre | 227.7 | ₹3,750.22 |
| 2 | Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means | 4.12 | Cubic Metre | 1,437.7 | ₹5,923.32 |
| 3 | Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) | 9.55 | Cubic Metre | 6,995.5 | ₹66,807.03 |
| 4 | Providing Laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces & watering compacting etc complete. | 18.59 | Cubic Metre | 7,031.65 | ₹1,30,718.37 |
| 5 | Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or
chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) | 2.45 | Cubic Metre | 7,581.1 | ₹18,573.7 |
| 6 | Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. | 9.44 | Cubic Metre | 132 | ₹1,246.08 |
| 7 | Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. | 5.66 | Cubic Metre | 1,520.2 | ₹8,604.33 |
| 8 | Providing Laterite stone masonry in cement mortar 1:6 in Superstructure including racking out joints when plastering is to be done watering and scaffolding complete. | 19.64 | Cubic Metre | 7,825.85 | ₹1,53,699.69 |
| 9 | Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete | 0.05 | Cubic Metre | 2,20,055 | ₹9,902.48 |
| 10 | Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. | 2.1 | Square Metre | 3,386.9 | ₹7,112.49 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.14 MB
BOQ_2199995.xls
BOQ • 0.32 MB
B1Kolkewadi.pdf
Tender Documents • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .