PROTECTIVE SHED CIVIL AND MINOR ELECTRICAL WORKS

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II

DESCRIPTION OF WORK

Surface excavation and dressing of the ground including removing vegetation and inequalities not exceeding 30 cm(average) depth in all kinds of soil and disposal of rubbish, nearby disposal area and lift up to 1.5 m.

Supplying,stacking and spreading approved quality morrum in layers not exceeding 200mm thick including watering,ramming,levelling and proper compacting attain uniform & levelled surface by spraying water and keeping wet during operation or plate vibrator whereever roller is not accessible, including hire charges of roller / vibrator,labour,cost of fuel,all other incidental charges,etc all as specified and directed by EIC.

Dismantling existing R.C.C/ PCC work of any thickness and description including stacking of steel bars and disposable of unserviceable materials within 50 metres lead with rate including hire charges for labour,tools,etc all as specified and directed by EIC.

Excavating holes for foundation pedestals upto 0.5 cum including getting out the excavated soil, then returning the soil as required in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering etc, disposing of surplus excavated soil, as directed within a lead of 50 m and lift upto 1.5 m - All kinds of soil

Providing and removing form work to PCC pedestals,etc., by providing 12mm thick marine plywood sheets with all supports, struts, wedges, scaffolder, bracings, runners,tie rods,ladder gangways,dressing with shuttering oil including MS nails, temporary openings, internal / external splayed, rounded edges or grooves for forming throating etc. complete all as specified and directed by EIC.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone ggregate 20 mm nominal size derived from natural sources) including mechanical vibration,curing, etc. complete with rates including cost of material ,tools, labour, transportation etc., all as specified and directed by EIC.

Providing and constructing brick work with best locally available flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in CM 1:6 for walls for all thickness in standard bonds including raking out joints 10mm deep to receive plaster,necessary scaffolding, curing etc., including cost of all materials,labour,taxes, curing etc., complete as specified and directed by EIC.

Plastering internal / external brickwalls / concrete surfaces with C.M 1:6, 20 mm thick trowelled to even and smooth finish including surface finishing over old wall surfaces at heights with rate including cost of all materials,labour,curing,transportation,scaffolding,etc all as specified and directed by EIC.

Supplying ,carrying to site all approved materials. providing and fixing in position pre-painted / colour coated galvalume profile sheets for roof /wall clading (trapezodial pattern or matching with the profile of existing roof sheeting)of 0.50 mm total coated thickness),550 Mpa minimum,yield strength , total coated thickness with zinc coating 120 grams per sqm as per IS: 277, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by EIC., the self drilling self tapping screwes shall be of required size as per site condition and the screws shall be fixed at suitable intervals as per standards procedure and direction of EIC. The contractor has to provide screw caps suiting the matching colour of sheet to avoid corrosion due to weather action and to give asethetic look. The make of screws shall be from HILTI,CORROSHIELD & BUILDEX.Penetration & side as well as end laps in sheet shall be sealed by using butyl sealant taps and silicon sealant.HDPE fillers shall be provided wherever required to close voids between sheets,sheet & fasteners etc,necessary overlaps as per manufacturers specification shall be provided. Make-JINDAL,TATA or equivalent,all complete as per direction of EIC.

Supplying, fabricating and erecting/fixing in position using M.S rolled structural members like I-Beams,channels , angles M.S pipes, MS square pipes, chequered plate,square rods,MS heavy duty Hinges, Handles, Aldrops, Tower bolts,etc of TATA, SAIL, RINL make conforming to IS specification including lifting,hoisting,fixing in position by welding at site,drilling neccessary holes,bolting and application of two coats of synthetic enamel paint including supplying and applying a coat of Zinc Chromate primer of ASIAN paints, Dulux, BERGER, Growel or equivalent make all as specified and directed by EIC.The relevant code of procedure for rolled steel section dimensions, welding ,erection and hoisting and tolerances allowed shall be complied. .(The work is to be carried out at all heights by taking all safety precautions.)

POINT WIRING: Supply & fixing of following light points etc with 2 runs of 1.5 sq. mm ISI marked FRLS PVC insulated flexible copper conductor 1.1kV grade concealed suitable diameter PVC Conduit pipe of 2 mm thick/PVC concealed including earthing the point with 1.5sq mm FRLS PVC insulated flexible copper conductor single core cable and supply & fixing of 10 Amp @ 250V AC SP Modular switches of approved quality, color & design with 2 mm thick G.I/PVC modular box including inner plates and outer plates, concealed in wall and inter connection complete. Make: Havells / fincab / Finolex 2 Light points controlled by one switch 5 / 10 A modular type SP switch Make: Legrand/Siemens/L&T/GE.

PROVIDING OF LED LIGHT LUMINAIRE: Supply & Fixing of 4 feet 2*20 Watt, Industrial batten with two numbers Industrial LED Tube lights on wall/with down rods/iron frame with all necessary accessories to be done as per site condition, insturcted by EIC. make : Philips/Wipro/CGL / FA /Havells / Bajaj

POWER WIRING: Providing and laying of 2 runs of 2.5 sq mm and 1 runs of 1.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with crimping lugs at DB and Switch termination and inter connection complete etc as per site. The scope also includes wiring of the testing tables without conduit for different power supplies in the existing trunking. Make: Polycab/Havells/Finolex only

Providing of Independent Modular Sockets & Switches: Supply and fixing of following items with 2 mm thick GI modular box independent concealed in the wall/on metal frame with wooden board for insulation with inter connection complete. 3 No, 6 Amp 3/2 pin multiple universal socket controlled one no.6 Amp switch each & 1 No, 16/6 Amp 5 pin multiple universal socket controlled one no.16 Amp switch. Make: Legrand/Siemens for 230V Supply

POWER WIRING: Providing and laying of 4 runs of 4.0 sq mm and 2 runs of 2.5 sq.mm 1100 volt grade FRLS PVC insulated flexible copper conductor with suitable dia PVC conduit conductor flexible wire for power / sub mains with suitable size 2 mm thick PVC conduit with bends, special junction boxes laid concealed / on existing cable trays / on the surface with suitable fixing clamps, nuts, bolts with interconnections complete.. Make: Finolex / polycab/ Havells / FortuneArt / L&T

MCB ENCLOUSER: Supply fixing, testing and proving of 4 pole 32A rated industrial MCB with suitable metal enclouser. The MCB box shall be concealed / mounted on surface of the wall/ pillar or on suitable iron angular frame as per site requirement, including grouting materials such as cement for patch works complete. Make:Legrand / L&T

Supply and installation of single phase Industrial type pedestal fan with 450mm sweep and fan to be of robust material and design with three speed control and height adjustment. Make: Almonard/Usha/Orient/Crompton

PROVIDING OF MODULAR TYPE IN-DEPENDENT SWITCHES & SOCKETS: Supply and fixing of 2 Nos 6/16 amps 3 pin multiple socket controlled by 2 No. 16 amps SP MODULAR switch of approved quality, color & design shall be mounted on suitable cover plate with suitable MS box with inter connection complete as per site requrement .The box shall be mounted on concelled/ surface of wall /metal frame with wooden board for insulation with all requred accessories as per site condition. Make:Legrand / Crabtree