SPECIAL REPAIRS TO BUILDING No P 145 (TYPE V 06 Nos) IN RESIDENTIAL COLONY AT R DE (ENGRS) DIGHI, PUNE

Amount

Dismantling tile work in floors, walls and roofs for 10 mm to 25 mm thick tiles, laid in cement mortar including stacking material and dispose off debries out of Mod land complete all as specified and directed.

Demolishing cement concrete nominal concrete 1:3:6 or richer mix (including equivalent design mix) manually / by mechanical means including disposal of material within 50 metres lead complete all as specified and directed.

Material and labour for Providing and laying cement concrete(Cast-in-situ) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., upto floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete all as specified and directed.

Material and labour for Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, dressing and finishing the top smooth complete all as specified and directed.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead complete all as specified and directed (Demolition of RCC chajja height upto triple story).

Demolishing brick work built in cement mortor manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead complete all as specified and directed.

Material and labour for Providing and laying vitrified tiles in floor , size of tile 600mm x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved brand & manufacturer in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Material and labour for Providing and laying vitrified tiles, size of tile 600mm x 600mm (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622 of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick screed bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement and matching pigments complete all as specified and directed.

Material and labour for Providing and laying vitrified tiles, Matt finish, Anti Skid tiles in floor, size of tile 600mm x 600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand and manufacturer in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily complete all as specified and directed.

Material and labour for Providing and laying non skid ceramic floor tiles of size exceeding 0.09 sqm and not exceeding 0.16 sqm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick screed bed in cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments complete all as specified and directed.

Material and labour for Providing and fixing 1st quality ceramic glazed wall tiles of size 300mm x 450mm conforming to IS: 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kgs per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.

Material and labour for Providing and fixing 18 mm thick granite stone slab colour black, Cherry / Ruby red, area of slab over 0.50 sqm, gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facia and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch-ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish at all levels complete all as specified and directed.

Extra for providing opening of required size & shape for wash basin / kitchen sink in kitchen platform, vanity counter and similar location in marble / granite / stone work including necessary holes for pillar taps including moulding, rubbing and polishing of cut edges complete all as specified and directed.

Material and labour for 25mm thick cement concrete 1:2:4, type B1 (using 20mm graded stone aggregate) as in sub base of floor finishes complete all as specified and directed.

Material and labour for Providing and fixing 18 mm thick Udaipur green marble, area of slab over 0.50 sqm, gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facia and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch-ups including rubbing, curing, moulding and polishing of edges to give high gloss finish at all levels. Raj Nagar Plain white marble / Udaipur green marble / Zebra black marble complete all as specified and directed.

Dismantling doors, windows and clerestory windows of area 3 sqm and below (steel, aluminium or wood) shutter including chowkhats, architrave, holdfasts complete and stacking within 50 metres lead all as specified and directed.

Taking out doors, windows and clerestory window shutters of area 3 sqm and below (steel, aluminium or wood) including stacking within 50 metres lead complete all as specified and directed.

Supply and fix, factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc; and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete or masonry work including filling hollow portion of frame with PCC 1:3:6 type C1 complete all as specified and directed.

Supply and fix, factory made pressed steel frames made out from 1.25mm thick steel sheet for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete or masonry work including filling hollow portion of frame with PCC 1:3:6 type C1 complete all as specified and directed.

Material and labour for Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred and jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer's specification complete all as specified and directed.

Material and labour for Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement and self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-Charge. Non decorative finish.

Material and labour for Providing and fixing ISI marked flush door shutters 35 mm thick conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked stainless steel butt hinges with necessary screws complete all as specified and directed.

Material and labour for Providing and fixing wire gauge for 35 mm thick shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood complete all as specified and directed.

Material and labour for Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:2001 (Part B) fixing with butt hinges of required size with necessary screws all complete as per directions of Engineer-in-Charge and panelling with panels. Note: Butt hinges and necessary screws shall be paid separately), 12 mm thick plain grade-1, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS:3087 marked and bonded with BWP type synthetic resin adhesive as per IS:848.

Material and labour for Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws complete size 300mm x 16 mm complete all as specified and directed.

Material and labour for Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws complete size 150mm x 10 mm complete all as specified and directed.

Material and labour for Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws complete size 200mm x 10 mm complete all as specified and directed.

Material and labour for Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws complete size 125 mm complete all as specified and directed.

Material and labour for Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws complete twin rubber stopper complete all as specified and directed.

Supply and fixed in repairs 25mm bore stainless steel 304 grade curtain rods with suitable fancy type brackets with fancy stainless steel end caps/knobs and fixed in position using stainless steel screws complete all as specified and directed.

Material and labour for Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws complete size 100mm x 58mm x 1.90 mm complete all as specified and directed.

Material and labour for Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS:3564, embossed on the body, door weight upto 36 kg to 80 kgs and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws complete all as specified and directed.

Material and labour for Providing and fixing 600mm x 120mm x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete all as specified and directed.

Taking down exisiting vitreous china wash basin of any size complete all as specified and directed.

Material and labour for Providing and fixing white Vitreous China wash basin size 550 x 400 mm with 15 mm C.P. brass pillar taps with a pair of C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed.

Material and labour for providing and fixing white vitreous china wash basin size 550 x 400 mm with a pair of CI bracket, 15mm CP brass centre hole mixer, 32mm CP brass waste of standard pattern, including painting of fittings and brackets, cuttings and making good the wall where ever required complete all as specified and directed.

Taking down exisiting unserviceable stainless steel sink of any size complete all as specified and directed.

Material and labour for Providing and fixing stainless steel 'A' ISI 304 (18/8) kitchen sink without drainage board as per IS:13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, size 470mm x 420mm bowl depth 178 mm complete all as specified and directed.

Material and labour for Providing and fixing stainless steel 'A' ISI 304 (18/8) kitchen sink with drainage board as per IS:13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required, size 510mm x 1040 mm bowl depth 250 mm complete all as specified and directed.

Taking down exisiting vitreous china water closet squatting pan (Indian type) including PVC flush tank complete all as specified and directed.

Material and labour for Providing and fixing white Vitreous China Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required complete all as specified and directed.

Material and labour for Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Taking down exisiting vitreous china water closet pedestal pattern including PVC flush tank complete all as specified and directed.

Material and labour for Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litres low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS: 7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid complete all as specified and directed.

Supply and fixed in repair 15mm bore two way bib cock with inlet and outlet screwed for pipe and connections including necessary fittings complete all as specified and directed.

Supply and fixed in repair 15mm bore heath faucet with inlet and outlet screwed for pipe and connections including necessary fittings complete all as specified and directed.

Material and labour for Providing and fixing CP brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931 suitable for 15 mm nominal bore of pipe complete all as specified and directed.

Material and labour for Providing and fixing C.P. Brass angle valve for basin mixer, flush tank and geyser points of approved quality conforming to IS : 8931 suitable for 15 mm nominal bore of pipe all as specified and directed.

Material and labour for Providing and fixing in repair brass CP mixer hot and cold water with telephonic shower screwed down for iron pipe and fixed of approved quality conforming to IS : 8931 suitable for 15 mm nominal bore of pipe complete all as specified and directed.

Material and labour for Providing and fixing uplasticised PVC connection pipe, 15 mm nominal bore, with brass unions, 45 cm length complete all as specified and directed.

Material and labour for Providing and fixing toilet paper holder, C.P. brass complete all as specified and directed.

Material and labour for Providing and fixing C.P. brass long body bib cock, suitable for 15 mm nominal bore of pipe of approved quality conforming to IS standards and weighing not less than 690 gms complete all as specified and directed.

Material and labour for Providing and fixing CP 150 mm nominal size square 100 mm diameter of the inner hinged round grating of approved quality and colour of rectangular type with openable circular lid complete all as specified and directed.

Material and labour for Providing and fixing CP grating 125 mm nominal dia with 25 mm waste hole of approved quality and colour of circular type complete all as specified and directed.

Taking up or down 15mm bore steel tubing with fittings complete all as specified and directed.

Taking up or down 20mm bore steel tubing with fittings complete all as specified and directed.

Material and labour for Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15 mm nominal dia Pipe having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement including cutting chases and making good the walls including testing of joints complete as per direction of Engineer-in-Charge.

Material and labour for Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm nominal dia Pipe having thermal stability for hot & cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge

Dismantling water tanks exc 250 ltrs but n exc 500 ltrs capacity and removing to store complete all as specified and directed.

Dismantling water tanks exc 500 ltrs and n exc 1000 ltr capacity and removing to store complete all as specified and directed.

Material and labour for Providing and placing on terrace (at all floor levels) polyethylene water storage tank 1000 ltrs capacity, IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, complete all as specified and directed.

Material and labour for Providing and placing on terrace (at all floor levels) polyethylene water storage tank 500 ltrs capacity, IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank, complete all as specified and directed.

Taking down existing unserviceable gun metal gate valve of any size complete all as specified and directed.

Material and labour for Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end), suitable for 20mm bore of pipe complete all as specified and directed.

Taking down existing unserviceable PTMT ball valve of any size complete all as specified and directed.

Material and labour for Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P. / H.P.H.D. plastic ball, suitable for 20mm bore of pipe, 120 mm long, weighing not less than 198 gms complete all as specified and directed.

Material and labour for Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour, suitable for 20mm bore of pipe, weighing not less than 40 gms complete all as specified and directed.

Rounding to edges of stone slabs one edge such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead complete all as specified and directed.

Material and labour for Cement plaster (in coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand) complete all as specified and directed.

Material and labour for Cement plaster (in coarse sand) 15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand) mixed with including WPC @ 3% by weight of cement complete all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches complete all as specified and directed.

Material and labour for Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete all as specified and directed.

Material and labour for Distempering with 1st quality acrylic distember (Ready made) having VOC content less than 50 grams/litre of approved brand and manufacture to give an even shade on new work (two coats) with cement primer complete all as specified and directed.

Material and labour for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one coat on old work on wooden/steel surface complete all as specified and directed.

Material and labour for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two coats on new work on wooden/steel surface over an under coat of suitable shade with primer of approved brand and manufacture complete all as specified and directed.

Material and labour for Finishing walls with acrylic smooth exterior paint of required shade on old work (two coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface complete all as specified and directed.

Material and labour for Finishing walls with acrylic smooth exterior paint of required shade new work (two coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches complete all as specified and directed.

Material and labour for White washing with lime to give an even shade for new work (three coats) complete all as specified and directed.

Material and labour for Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment, treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 Coarse sand) to match the existing floor with Chlorpyriphos / Lindane E.C. 20% with 1% concentration complete all as specified and directed.

Material and labour for Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc; with Chlorpyriphos / Lindane E.C. 20% with 1% concentration complete all as specified and directed.

Dismantling timber scantlings under 40 sq. cm and over in section, in staircase railing complete all as specified and directed.

Material and labour for Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc; of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-Charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc) complete all as specified and directed.

Material and labour for Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kgs) G.I fasteners 100mm x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc; profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc; after fixing frame the gap between frame and adjacent finished

wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality all complete as per approved drawing and direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable three track three panels sliding window with fly proof SS wire mesh (two Nos. glazed & one No. wire mesh panels) made of (small series) frame 92mm x 44 mm & sash 32mm x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.

Material and labour for Providing and fixing factory made uPVC white colour casement / casement cum fixed glazed windows comprising of uPVC multi-chambered frame,sash and mullion (where ever required) extruded profiles having minimum wall thickness of 1.70mm for series R1 and R2 profiles and 2.10mm for series R3 and R4 profiles comforming to EN:12608 in any shape, colour and disign duly reinforced with galvanized mild steel section made of required shape & size as per CPWD specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (wherever required) of appropriate dimentions, EPDM gasket, hardware, SS 304 grade fastner of min 8mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part I to 14, plastic packers, plastic caps and necesary stainless steel screws etc profiles of frame, sash & mullion (if required shall be mitred cut and fusion welded mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc; after fixing of gap between frame and adjacent finsished wall shall be filled with weather proof silicon sealent over backer rod of approved size and quality all complete all as specified and directed by Engineer-in-Charge fixed window / ventilator with mullion / transom using R2 series with frame (33 mm & above) x (35mm & above) & mullion (33 mm & above) x (50 mm & above) (height upto 0.90 metre) complete all as specified and directed.

Supply and fix Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm) complete all as specified and directed.

Supply and fix Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia wire and 1.4mm wide aperture with matching wood beading complete all as specified and directed.

Supply, fabricate and fix Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete all as specified and directed.

Dismantling boarding any description, fixed in any position with nails complete all as specified and directed.

Material and labour for Providing and fixing cup board shutters 25mm thick with Pre-liminated flat pressed three layer particle board IS:12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination and 2mm thick PVC edge binding tape, bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge.

Material and labour for Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws complete all as specified and directed.

Material and labour for Providing and fixing special quality bright finished brass cupboard or ward robe locks 50 mm with four levers of approved quality including necessary screws complete all as specified and directed.

Material and labour for Painting (one coat) on 75 mm diameter pipes of rain water, soil waste and vent pipes and fittings with synthetic ememal paint of approved brand and manufacture and required colour on old work complete all as specified and directed.

Material and labour for Painting (one coat) on 100 mm diameter pipes of rain water, soil waste and vent pipes and fittings with synthetic ememal paint of approved brand and manufacture and required colour on old work complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced concrete) set in cement mortar 100 mm internal dia complete all as specified and directed.

Material and labour for Providing and fixing 110mm bore on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, Single socketed pipes complete all as specified and directed.

Material and labour for Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion double/single bend, 110mm bore complete all as specified and directed.

Material and labour for Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion shoe (Plain), 110mm complete all as specified and directed.

Material and labour for Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion double/ single tee with door, 110 x 110 x 110mm complete all as specified and directed.

Supply and fix, 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

Material and labour for Providing and fixing 75mm bore on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, single socketed pipes complete all as specified and directed.

Material and labour for Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion double/single bend, 75mm bore complete all as specified and directed.

Material and labour for Providing and fixing on wall face unplasticised - PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type 'A', including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion double/ single tee with door, 75 x 75 x 75mm complete all as specified and directed.

Supply and fix kitchen cabinets consisting SS drawer baskets in required sizes (min height above platform / floor 0.90m and min width 0.60m) at site made out of 18mm thick one side decorative lamination and other side Balancing lamination sheet consisting of carcasses 18mm thick WPC (density > 650kg/cum) sheet & providing of shutters made out of 18mm thick one side teak face finish WPC (density > 650kg/cum) sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick PVC bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed. Note: (a) Quoted rate deemed to included the cost of all necessary fittings like soft operating SS hinges of required size invisible / 'G'profile type handles etc. Measurement will be made and paid for front face only. Quoted rate is deemed to be included the cost of side, back and bottom panels and necessary locking arrangements. Size of cabinet near sink will be adjusted as per site requirements. (b) SS basket and its SS soft operating hinges, channel and necessary fitting to be paid seperately under relevant items. Make: Heitich/ Haffle/ Godrej.

Supply and fix kitchen cupboards in required sizes (Depth 610mm) at site made out of 18mm thick one side decorative lamination and other side Balancing lamination sheet consisting of carcasses 18mm thick WPC (density > 650kg/cum) sheet and providing of shutters made out of 18mm one side teak face finish WPC (density > 650kg/cum) sheet all required brackets SS screws etc. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2mm thick PVC bending tape or 90 degree edge bend finish as per make and specification complete all as specified and directed. Note: (a) Quoted rate deemed to included the cost of all necessary fittings like soft operating SS hinges of required size invisible type handles nd SS soft operating hinges, channel etc. (b) Measurement will be made only for front face. Quoted rate deemed to be included the cost of side, back and bottom panels and necessary locking arrangements etc. Make: Heitich/ Haffle/ Godrej.

Supply and fix stainless steel 304, electro-polished corrosion resistance kitchen cutlery holder basket having size modular type of size 24 x 20 inches height of basket 6-12 inches with side sliding roller clip over stainless steel channel on both side included all necessary accessories complete all as specified and directed.

Supply and fix stainless steel 304, electro-polished corrosion resistance cup and saucer holder / kitchen cutlery basket having size modular type of size 24" x 20" x 4" to 6" inches with side sliding roller clip over stainless steel channel on both side complete all as specified and directed.

Supply and fix Electric chimney filterless auto clean of size 60cm 2-4 burner stove wall mounted chimney suction capacity : 1200Cum/hr, motion sensor control complete including flexible exaust pipe of required size & length complete all as specified and directed. Make: Faber / Elica / IFB.

Material and labour for applying a coat of industrial bitumen 85/25 at the rate of 1.20 kg/sqm including cleaning the existing plaster/concrete surfaces of sunken portion complete all as specified and directed.

Material and labour for PCC 1:5:10 type E2 (40mm graded stone aggregate) as in filling under floor complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

Material and labour for Providing and fixing 90mm bright finished aluminium hasp and staple (safety type) with necessary screws complete all as specified and directed.

Supply and fixed in repairs 330mm x 430mm PVC body cabinet Mirror and fixing to the wall with suitable screws complete all as specified and directed. Make: Prayag or techno-commercillay equivalent make as approved by GE

Material and labour for providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work up to plinth level, 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) complete all as specified and directed.

Material and labour for Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand all complete as per the direction of Engineer-in-Charge.

Material and labour for Providing and fixing bright finished brass helical door spring (superior quality) complete all as specified and directed.

Material and labour for Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS : 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand), with modular bricks complete all as specified and directed.

Supply and fix, Dry System (Pull it Pully System 9 feet long) total No. of pipes 04 Nos Pulley operated clothes drying system consisting of anodized aluminium pipes, each of outer dia 22mm and inner dia 19.8mm. Pullys made up of Delrin with rope guide mounted on channel pair of length 24". (distance between two pipes is adjustable) Locking system to hide rope knot. Channel to be mounted or fixed with self tapping screws provided in kit rope will be Polyster braide undyed of 3-4 mm dia complete all as specified and directed.

Providing and fixing C.P. brass shower rose with 15 mm inlet 150 mm dia meter complete all as specified and directed.

Taking down carefully unserviceable sub main wiring including conduit from ground complete all as specified and directed.

Taking down unserviceable DBs / MCB SP / SPN / isolator of any rating & size carefully disconnecting and making good disturbed surfaces complete all as specified and directed.

Taking down copper / aluminium point wiring (light / fan /socket or power) complete including fixture and fittings such as switches, sockets, ceiling roses pendent / brackets holders, regulators, unserviceable light fittings, removing material for taking credit and making good disturbed surfaces of walls, floors complete all as specified and directed.

Material and labour for point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multistranded copper conductor with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit of 20mm dia and conduit accessories (ISI marked) concealed in wall / fixed to roof, ceiling etc including provision of 1.5 Sqmm PVC insulated multistranded unsheated copper conductor cable FRLS (ISI markd) with proper colour coding as earth continuity conductor connected to common earth dolly, modular sheet steel sunken terminal box of appropriate size suitable for modular sheet steel sunken terminal box of appropriate size suitable for modular switch / fittings concealed in walls, with modular back plate, top cover fixed flush to wall for housing switches, socket outlets, fan regulators etc duly earthed including cutting chases of existing wall for conduits and sinking for boxes and making good to the disturbed surface of wall / floor and matching with existing specifications. Connections of cable with MCB's or bus bar shall be done through proper size copper / brass thimbles all as specified and as directed for the following: -

One light point controlled by one, one-way switch

One ceiling fan/exhaust fan point controlled by one, one-way switch

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.

One bell point controlled by one bell switch 5 Amps.

One light point controlled by two, two way switch 5 Amps.

All as per Sl item No. 121 here-in-before but using 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Supply and fix, modular switch, single pole, one way, 6 Amps, 1 Module, 230 volt, ISI marked complete all as specified and directed.

Supply and fix, modular switch, single pole, two way, 6 Amps, 1 Module, 230 volt, ISI marked complete all as specified and directed.

Supply and fix, modular switch, single pole, one way, 16 Amps, 1 Module, 230 volt, ISI marked complete all as specified and directed.

Supply and fix, modular shuttered socket outlet 5 Pin, 6 Amps, 2 module, 230 volts, ISI marked complete all as specified and directed.

Supply and fix, modular shuttered socket outlet 6 Pin, 6/16 Amps, 2 module, 230 volts, (ISI marked) complete all as specified and directed.

Supply and fix, ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.

Supply and fix, stepped type modular electronic fan regulator 120 watt, 2 module suitable for 1200/1400 mm sweep energy saving fans, ISI marked complete all as specified and directed.

Supply and fix, call bell (ding dong) 240 V, 50 Hz complete all as specified and directed.

Supply and fix, LED lights fitting 1x 18/20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed.

Supply and fix, LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix, round surface mounting LED 12 W luminaire Integral round shape surface mounting high powder LED luminaire, dome shape opal diffuser complete fitting with all fixing arrangement complete all as specified and directed.

Taking down and refixing of ceiling fan any size / sweep including oiling, greasing and cleaning and applying two coats of synthetic enamel paint after preparation of surface and over a coat of primer complete all as specified and directed.

Taking down the existing electric meter of any capacity and make after disconnecting electrically and carry out the cleaning and refixing, reconnecting including of electric meter, testing in all respect for smooth running complete all as specified and directed.

Taking down and refixing of exhaust fan any size / sweep including oiling, greasing and cleaning and applying two coats of synthetic enamel paint after preparation of surface and over a coat of primer complete all as specified and directed.

Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing / overhauling / painting the geyser by thoroughly cleaning the tank, thermostat, heating element and testing in all respect for smooth running and refixing complete all as specified and directed.

Supply and fix, LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Material and labour for Wiring for circuit / submain wiring alongwith earth wire 2 x 1.5 sqmm + 1 x 1.5 sqmm size of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. Note: 3 runs of cable and one run of conduit shall be measured as one unit

Material and labour for Wiring for circuit / submain wiring alongwith earth wire 2 x 4 sqmm + 1 x 4 sqmm size of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. Note: 3 runs of cable and one run of conduit shall be measured as one unit

Material and labour for Wiring for circuit / submain wiring alongwith earth wire 2 x 6 sqmm + 1 x 6 sqmm size of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required complete all as specified and directed. Note: 3 runs of cable and one run of conduit shall be measured as one unit

Supply and fix, MCB DB VTPN 4 way with metal double door, IP-43 protection suitable for MCCB as incommer and MCB as outgoing, VTPN DB's 415 volt 3 phase complete with appropriate size copper bus bar and neutral link as required at site and including cutting chases to wall for fixing of DB and making good distrubed wall / surface all as required at site directed by Engineer-in-Charge. Make: Legrand or equivalent make of ABB / Siemens.

Supply and fix, 12 way, double door, single pole and neutral, sheet steel, MCB distribution board, 240V on surface / recess, complete with tinned copper bus bar, neutral bas bar, earth bar, din bar, inter-connections powder painted including earthing as required complete all as specified and directed.

Supply and fix, 20 A, 240 V SPN, industrial type socket outlet with 2 pole and earth enclosed plug top along with 20 A 'C' curve, SP, MCB in sheet sleet inclosure on surface or in recess with chained metal cover for the socket outlet and complete with connections testing and commissioning as required complete all as specified and directed.

Supply and fix, DP sheet steel enclosure on surface / recess alongwith 25/32 A 240 V 'C' curve DP MCB complete with connections, testing and commissioning as required complete all as specified and directed.

Supply and fix, MCB single pole, 240 volts, 6 to 32 Amps complete all as specified and directed.

Supply and fix, MCB single pole and neutral 240 volts, 6 to 32 Amps complete all as specified and directed.

Supply and fix, MCCB four pole, 415 volts, 125 Amps, rupturing capacity 36 KA complete all as specified and directed.

Material and labour for Providing, laying and fixing 40mm bore GI pipe medium grade complete with all fittings, bends and accessories including all earthwork and excavation, returning & refilling complete all as specified and directed.

Material and labour for Providing, laying and fixing 20mm bore GI pipe medium grade complete with all fittings, bends and accessories including all earthwork and excavation, returning & refilling complete all as specified and directed.

Material and labour for Providing, laying and fixing 15mm bore GI pipe medium grade complete with all fittings, bends and accessories including all earthwork and excavation, returning & refilling complete all as specified and directed.

Material and labour for Providing and fixing 40mm bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.

Material and labour for Providing and fixing 20mm bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete all as specified and directed.

Making connection of G.I. distribution branch with G.I. main of 50 to 80 mm dia sizes by providing and fixing tee including cutting and threading the pipe complete all as specified and directed.

Material and labour for constructing masonry chamber 30cm x 30cm x 50 cm inside in brick work in cement mortar 1:4 (1 cement : 4 course sand) for stop cock with C.I suface box 100mm x 100mm x 75mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 course sand : 4 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 course sand) 12 mm thick, finished with a floating coat of neat cement as per standard design complete all as specified and directed.

Taking down the existing LT UG cable of following size in trenches / pipes complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10sq mm 2.0 core complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for foundation or for shafts, wells, cesspits, manholes, pier holes, tubular poles or laying of pipes or for removal / laying of cables etc; not exceeding 10 sqm on plan and getting out in soft / loose soil including trimming sides of foundations and forming bottom surface to required level complete all as specified and directed.

Returning, filling in, soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removing excavated surplus material to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 50 mtr above the starting point complete all as specified and directed.

Supply & Laying 50 mm outside dia double wall corrugated pipe (DWC) of HDPE ISI mark for enclosing cable below ground / road surface to a required depth, including suitable size couplers for jointing of pipe as per site requirement complete all as specified and directed.

Material and labour for 50 mm bore GI steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and directed. Make: Tata / Jindal / Bansal.

Material and labour for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in any type of soil, fill up the earth pit with soil for best result and removal of excavated material from the site complete all as specified and directed. Note: Earth protection pipe and earthing lead wire upto and including 7.5 m length is deemed included in unit rate quoted by the contractor.

vishalconstruction (BID ID -3288869)

Mukund Engineers and Contractors (BID ID -3287588)

Shri Sant Cosntruction (BID ID -3288855)

BSK Construction (BID ID -3287783)

tulsani associates (BID ID -3292173)

ShreHari Civil Enginneering and Contractors (BID ID -3288662)